Coordinate Measuring Machine

MORA Primus 686

Condition: used, Technical details: max. ram stroke: 250 mm workpiece diameter - max.: 80 mm max. workpiece length: max. 900 Gbedpfx Aaow Au I Is Isg total power requirement: 1,5 kW weight of the machine ca.: 2,1 t

Condition: used, Year of construction: 2017, Absolutely as good as new Gbodpfxjvvxvde Aa Ieg Consists of 1 measuring case 12-20mm Consists of 1 measuring case 20-50mm Consists of 1 measuring case 50-100mm

Condition: used, Year of construction: 2008, max. wheel diameter 300 mm max. module 8 min. module 0,7 Control SINUMERIK 840 D min/max. pitch cone angle - 90 / + 90 ° workpiece spindle - bore 127 mm Gjdpfx Aaevxww So Iebg grinding wheel diameter 50 - 230 mm spindle speeds (infinitely variable) 7.500 U/min work piece spindle speed 700 U/min total power requirement 146 kW weight of the machine ca. 21 t dimensions of the machine ca. 9,5 x 3,6 x 3,1 m Measuring probefor tooth gap(integrated on the grinding head) External grinding spindle cooling system ELBARON oil mist extraction (integrated in the machine) Hoffmann coolant filter system Was used for the serial production of spiral-toothed ring gears No clamping devices No grinding wheels / grinding wheel flanges No dressing wheels

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gbedoxln Iwepfx Aa Ijg Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: defective spare-parts repository (used), Table size: 1300 x 950 mm Gbedeicnk Eopfx Aa Ijg The device is not functional! Chassis for sale,

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Godpfxortrzdj Aa Iebg Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: ready for operation (used), Year of construction: 1965, A vertical gear shaping machine Lorenz is available. Module: 6.5, stroke: 120mm, max. gear diameter: 900mm, max. workpiece weight: 180kg, min. concentricity: 0.1mm, min. squareness: 0.05mm, roundness: 0.1mm. An on-site inspection is possible. Gjdpfsxq Eyhex Aa Isbg

Condition: used, Technical details: Gbjdju Nwc Hopfx Aa Iog capacity at 100% ED: 400 A capacity: 60% ED = 500 A welding current: Gleichstrom V weight of the machine approx.: 230 kg capacity: 21 kVA Welding rectifier MIG / MAG Cooling type F Protection class IP 23 insulation class F incl. wire feed device, feed rate 0,5 - 20 m/min Ground cable/pliers Hose package 4 meters new *

Condition: new, functionality: fully functional, machine/vehicle number: 314567.00, mount diameter: 30 mm, clamping range: 30 mm, number of clamping sleeves: 1, Collets / Collet Caps / Support Sleeve for Collet System new - unused 5 pcs collet caps for collet size Ø30, item no. 314567.00 4 pcs collets size Ø 30.0 1 pc support sleeve for collet size Ø30 Gbjdpfxowccp Hj Aa Ieg - for Reishauer RZ 301 / RZ 362 from our stock Price / details on request All technical information subject to errors and omissions. We sell exclusively to countries within the European Community.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: 0903, Data: Gbsdpov H Atnefx Aa Ijg Hobbing cutter diameter max. 90 mm Table diameter 145 mm Module -Max. 3 mm Smallest number of teeth that can be milled 4 Milling head swivel angle +/- 45 ° Resolution accuracy 0.1 degrees Workpiece table load 17 kN Milling cutter speed 450 - 4,500 1/min Operating voltage 400 V Control voltage 24 V Frequency 50 Hz Max. nominal current 55 A Fuse in the supply line 63 A Max. milling diameter of spur gears/helical gears 125 mm Max. milling width of spur gears/helical gears 250 (axial) mm Spindle stroke 180 mm Max. milling cutter width 200 mm Control system LIEBHERR PC NC If you are interested, another Liebherr LC122 (gear cutting) is available, currently linked to a Wera DRT 250 (sloping) line. Without packaging; any warranty rights are excluded. If you want to dismantle the system yourself, please include the relevant information in your bid. We accept no liability for the accuracy of the technical data, for the completeness of accessories and tools, or for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.