STAMA MC 526

STAMA MC 526

Condition: ready for operation (used), Year of construction: 2007, operating hours: 82,265 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, table width: 600 mm, table length: 1,400 mm, table load: 1,500 kg, spindle speed (max.): 10,500 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 42, tool weight: 5,000 g, number of axes: 3, This STAMA MC526 was manufactured in 2007. It features a 40-tool magazine, NC swivel table, chip conveyor, belt filter system, and an internal coolant supply via the spindle. Additional amenities include a high-pressure system, Renishaw probe, and an extraction system. Consider the opportunity to buy this STAMA MC526 vertical machining centre. Contact us for more information. Additional information • Feed Force X/Y-Axis: 4,000 N • Feed Force Z-Axis: 8,000 N • Rapid Traverse X/Y/Z: 60 m/min • Feed Rate X/Y/Z: 1 – 10,000 mm/min • Axis Dynamics: X = 5 m/s² • Axis Dynamics: Y = 8 m/s² • Axis Dynamics: Z = 12 m/s² • Distance Table to Spindle Nose: 350 – 710 mm • Tool Clamping Force: 7,000 N • Spindle Diameter: 65 mm • Constant Torque Range: Up to 3,000 rpm • Torque at 100% Duty Cycle: 30 Nm • Torque at 20% Duty Cycle: 59 Nm • Power Above 3,000 rpm at 100% Duty Cycle: 9.5 kW • Power Above 3,000 rpm at 20% Duty Cycle: 18.5 kW • Maximum Tool Diameter (All Positions Occupied): 88 mm • Maximum Tool Diameter (Adjacent Positions Free): 125 mm • Pull Stud Standard: DIN 69872-19 • Tool Change Time (Chip-to-Chip): Approx. 2.4 s • Tool Offset Functions: Length and Radius Compensation • Tool Data Input: Via Input Station or CNC Screen Menu • Positioning Resolution: 0.001 mm • Machine Prepared For: Fixed Table with T-Slots and Location Holes Hjdpfxsx S Skxo Aqgsfn • Machine Prepared For: NC Rotary Table with Tailstock • Tool Holder Type: SK40 DIN 69871 A/B • Siemens 840D SolutionLine • Chip conveyor optional • Belt filter system • Internal coolant supply via spindle • High pressure capability • Renishaw probe • Extraction system • Connection Voltage: 400 V • Phase: 3~ • Frequency: 50 Hz • Nominal Current: 34 A • Additional Fuse: 3 x 50 A • Minimum Connection Cross Section: 25 mm² • CE Marking: Yes Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • 4th axis rotary table, 1-degree indexing • Probe (workpiece/tool probing system) Hjdpfjy Epfvox Aqgofn Technical Specification Taper Size BT 50

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Hjdot Hwyljpfx Aqgsfn Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW Hsdpfx Aet Hwyroqgjfn weight of the machine ca. 10 t dimensions of the machine ca. m