Universal lathe machine

TOS Hostivař SU 100/8M

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 320 h, control type: CNC control, degree of automation: manual, actuation type: electric, controller model: EC10, bending force (max.): 100 t, working width: 3,000 mm, stroke length: 300 mm, number of axes: 6, type of crowning: manual, back gauge adjustment: CNC-controlled, overall weight: 11,000 kg, total length: 4,000 mm, total width: 2,300 mm, total height: 2,700 mm, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, number of support arms: 2, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, lower tooling, safety light barrier, upper tooling, Servo-electronic bending Wila tool holder: lower tool hydraulic clamping, upper tool hydraulic clamping, safety light curtain according to MRL/2006/42/EC, machine documentation, 2 support arms, manual crowning, CNC Y1/Y2 axes with 300mm stroke, CNC-controlled X axis, Z1+Z2 CNC back gauge fingers individually adjustable laterally, R axis CNC back gauge fingers height adjustable, network connection, graphical programming, 1 set upper/lower tool, length 2500mm Fully electronic drive Up to 30% higher productivity Up to 50% energy savings No harmful oil Low-noise operation Full working area Touchscreen operation Gcjdpfx Aoxhgploh Ioa

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. Gcsdpfx Ahsv I T Ews Ioa 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: good (used), turning length: 6,000 mm, spindle bore: 260 mm, Swing over bed Ø: 850mm Swing over cross slide Ø:500mm DBC Turning Length: 6000mm Spindle bore: 260mm Gcodpfx Ahowvtg Ao Iea Spindle power: 28kW Bed width: 650mm Stroke pinole: 300mm Spindle taper: 6Mk Workpiece weight: 5000 Length: 10000mm Width: 2100mm Height: 2600mm Weight: 12800kg

Year of construction: 2012, condition: ready for operation (used), Pressing force: 1700kN, bending length: 3230mm, ram stroke: 445mm, installation height: 615mm, distance between uprights: 2690mm, throat depth: 420mm, closing speed: 220mm/s, operating pressure: 300bar. Machine dimensions X/Y/Z: approx. 5250mm/2000mm/3000mm, weight: approx. 16000kg, operating hours: approx. 19133h. Documentation available. An on-site inspection is possible. Gedpsxbhg Ssfx Ah Ieca

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 820 mm, turning length: 6,000 mm, GURUTZPE lathe model Super A, 6,000 mm between centers, swing on bed 820 mm, on carriage 550 mm, in the neckline 1150 mm, diameter of the shank 82 mm, motorized carriage, 16 speeds of 9-500 rpm, has 3 steadys . Gjdev Rm Iwspfx Ah Isca

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Gcjdpfxowd D Ito Ah Iea

Year of construction: 1992, condition: ready for operation (used), Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible. Gcsdpfowxfaaox Ah Isa

Condition: excellent (used), functionality: fully functional, I am selling this lathe, connected, can be tested. Machine accessories. Can send a video of the machine via whatsapp. Swing diameter over the bed ..... 1050 mm Distance between centers ..... 6000 mm Swing diameter over the slide ..... 940 mm Gsdpsv Nw A Nsfx Ah Ieca

Condition: excellent (used), Year of construction: 1980, LATHE SPL 1250x6000 Chuck diameter: 1250 mm Max turning over cross slide: 920 mm Gcedpfx Aewywgbeh Isa Length between centers: 6000 mm Main motor: 22 kW Weight approx.: 19 t

Condition: excellent (used), Year of construction: 2000, The machine is in very good condition 1500x600 Godpfxjxl Ay Ie Ah Ijca