Wood shredder

WEIMA WL 4

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Technical specifications: Hopper opening with Logspacer: 600 x 1,050 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 256 mm Drive power: 18.5 kW Rotor speed: 90 rpm Number of knives: 28 pcs Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 15/20 mm Paint finish: Weima Standard RAL 2002 / 7016 Connection voltage: 400 V +/- 5 % / 50 Hz Included: Control cabinet incl. 5 m cable Electronic control Star-delta starting Rubber vibration dampers Islewt E T Nshccqpjic Patented V-rotor with profiled knife pockets Gearbox limit switch Second knife row Logspacer (free-cutting hopper) Hold-down device on the slider The metal separator shown in the photo can also be purchased Availability: short-term Storage location: Flörsheim

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Ielhcewp Uvxjcqpeic

Condition: used, Year of construction: 2016, Anzahl Messer Z = : 28 Stk Wellenanzahl : 1 Stk Wellendurchmesser : 252 mm Wellenbauform : V- Rotor Drehzahl Motor : 60-100 U/min Ielhccqeuqq Tyopeic Trichterlänge : 1050 mm, Logspacer, freischneidender Trichter Trichterbreite : 600 mm Trichterhöhe : 1050 mm Schublade : vierseitig segmentiert Steuerungsart : Siemens SPS Steuerung und 5 m Kabel Motorenart : Langsamläufer Gewicht ca. : 1300 kg Motorleistung : 18,5 kW Absaugdurchmesser : 160 mm Sieblochung: 12/10 mm Zusatzausstattungen: Schnelle Hydraulilk rückwärts mit Schockventil Segmentboden 4-seitig

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Dimensions (L/W/H) 1700x1130x1595 mm Weight 1300 kg Number of working hours 1741 h WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard Iijlhccqjvvx Dzspjc RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: excellent (used), power: 18.5 kW (25.15 HP), overall weight: 1,200 kg, Single-shaft shredder with load controlled ram - driven by hydraulic. V-rotor specially developed by Weima Automatical switch-off, when empty TECHNICAL DATAS: Hopper opening .....600x800 mm Ielswf Rvmjhccqpeic Rotor diameter.....252 mm Rotor length.....600 mm Rotor speed ..... 90 rpm Drive power..... 18,5 kW Number of knives..... 14 pcs Knive size..... 40x40 mm Screen holes..... 20/15 mm Exhaust connection..... 160 mm Length of the machine..... 2045 mm Width of the machine..... 1190 mm Height of the machine ..... 1640 mm Weight..... 1200 kg

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer:600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Iislhcjbtnftocqpjc Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Top equipment Location: Ex stock Bitburg - immediately available - at a special price

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Technical data: Iislhcobunq Hjcqpjc Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available

Condition: ready for operation (used), Functionality: fully functional, power: 11 kW (14.96 HP), TECHNICAL DETAILS Main motor power: 11.0 kW Number of axes: 1 Spänex SHB 150 Year of manufacture: 1992 Ijljwtdccehccqpsic Serial number: 942 MACHINE DETAILS Transport dimensions: 1,650 mm x 2,600 mm x 3,380 mm Documentation: Not available

Condition: used, Year of construction: 2025, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Ijlhccqswrccfepsic

Condition: excellent (used), Functionality: fully functional, Catalog number 7673 TECHNICAL DATA - top loading hopper inlet 800x1050mm - outlet for shredded wood fi 150mm - rotor working width 800mm - main engine 18.5kW - number of knives 19pcs - knife dimensions 30x30mm - sieve 24mm Islhcswrrhdscqpeic - pressure drawer - electric auto reverse - dimensions l/w/h 2000x1600x1800mm - weight about 1800kg ADVANTAGES - German production - auto reverse - pressure drawer - very good condition - used chipper Net price: PLN 57,900 Net price: EUR 13,624 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)