Lathe - cycle controled

DALIAN CKE6156Z/2000

Condition: excellent (used), Year of construction: 1994, Manual Plus control unit Turning diameter 260 mm Swing diameter 475 mm Center distance 1000 mm Turning length 880 mm Spindle speed 3,000 min-1 Crjdpet T T Urefx Af Hok 4-fold parat holder Tailstock

Condition: used, Year of construction: 1998, turning diameter 570 mm turning length 2000 mm control total power requirement 15 kW weight of the machine ca. 3,5 t dimensions of the machine ca. m Csdpfx Afeugawfo Hork

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages Codpfjvt D D Usx Af Herk - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: used, Year of construction: 2001, turning diameter 500 mm turning length 1000 mm control MONFORTS CONTROL control SYSTEM MTC-K turning diameter over bed slide 290 mm spindle bore 70 mm spindle turning speed range 3 - 2800 U/min spindle power 15 kW max. torque on the spindle 1530 Nm spindle head DIN 55027 Gr. 8 feed power X/Z axis 11300 N rapid travel - longitudinal/face 10 / 5 m/min bed width 360 mm travel of cross-slide 265 mm upper slide travel 140 mm turning tool - shaft cross cut 32 x 25 mm Cedpfxovh I Hvs Af Hjrk tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock taper MT 5 weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,88 x 1,68 x 2,18 m Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant

Condition: used, Year of construction: 1977, turning diameter x mm turning length x mm swing diameter over bed slide x mm Csdpfx Asrpa Nyof Hjrk turning diameter over bed x mm 550mm weight of the machine ca. 1,5 t

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning length: 450 mm, turning diameter: 246 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 68 mm, travel distance X-axis: 140 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 450 mm, Siemens 840 D control with Shop-Turn Travel paths X- 140 mm, Z- 450 mm, Y+- 40 mm Max turning diameter 246 mm Centre height 365 mm New main spindle with 6000 rpm Counter spindle with 6000 rpm Sauter star turret with 12 driven stations Part catcher, chip conveyor Crsdevta Amepfx Af Hok Reinforced coolant and lubricant pump C-axis, Y-axis Partial hollow clamping device Package bar machining Interface for bar loader magazine Finished parts container Tool measurement in the work area

Condition: used, New 2007 Seimens Sinumerik control Swing over bed Ø460 mm Swing over cross slide Ø258 mm Swing in the gap Ø670 mm Turning Length 1500 mm Spindle bore 58 mm Spindle power 7.5 kW Spindle taper 4 Mt Speeds ranges 3000 Rpm Feed rate X-Axis 5000 mm/min. Crodjwtpzqepfx Af Hek Feed rate Z-Axis 5000 mm/min.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Specifications Cedpfx Afovk E A Te Hsrk Manufacturer MONFORTS Model RNC4 Year 1993 Description WE OFFER AN VERY NICE CONDITION MONFORTS CNC LATHE INCLUDING COMPLETE TOOLINGS DRAWERS FOR TOOLS MACHINE HAS LIVE TOOLS , DRIVEN TOOLS MACHINE IS CONECTED ON POWER TECHNICAL INFO: Diameter 420 mm Distance between centers 600 mm CNC system Control System F Tools 12 positions Cross travel 250 mm Longitudinal travel 620 mm Hole through spindle 65 mm Spindle speed 70 - 4000 RPM Motor power 18,5 HP Weight 7500 Kg