Injection molding machine

ENGEL Victory 330/80 Phoenix

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Isdoh Nypfepfx Afvjtc

Condition: excellent (used), Year of construction: 2000, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, column diameter: 180 mm, displacement volume: 5,430 cm³, Equipment: documentation/manual, The machine is ready to load. 900 ton clamping force, equipped with take out robot, hopper dryer, hopper loader. First and only owner since produced. Ijdpfsickd Hjx Afvjtc The price is loaded on truck.

Condition: used, Year of construction: 1998, clamping force: 50 kN, displacement volume: 200 cm³, injection pressure: 2,587 bar, overall weight: 2,500 kg, load hours: 4,500 h, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz Isdpfxswi Uzhe Afvjtc delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 – Technical Specification General Information: Machine designation: DUO 4550/700 Controll : CC100 Clamping Unit: Clamping force: 7000 kN Opening force (with pressure pads): 510 kN Opening stroke: 1350 mm Minimum mould height: 450 mm Maximum mould height: 1350 mm Daylight (platens open): 2700 mm Platen dimensions (H × V): 1460 × 1360 mm Tie bar distance (H × V): 1030 × 930 mm Max. mould weight: 9000 kg Ejector stroke: 300 mm Iedev U Dn Njpfx Afvotc Ejector force: 90 kN Ejector strokes (Euromap 6): 8 Dry cycle time (Euromap 6): 7.0 seconds Injection Unit: Screw diameter: 90 mm L/D ratio (barrier): 24 Plasticizing rate: 2488 cm³/s Shot volume: 2860 cm³ Shot weight (theoretical): 2600 g Injection flow rate: 533 cm³/s Injection pressure: 1910 bar Specific injection pressure: 2100 bar Nozzle length: 185 mm Nozzle contact force: 65 kN Heater capacity (zone 7): 62 kW Pump drive power: 75 kW Oil capacity: 1000 liters Weight: Net weight of clamping unit: 22 tons Net weight of injection unit: 10 tons Cores: 2+2 Linear Robot Engel ERC

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 Origin: ENGEL St. Valentin, Austria 🔧 CLAMPING UNIT 1. Clamping force: 7000 kN 2. Opening force (with pressure pads): 510 kN 3. Opening stroke: 1350 mm 4. Minimum daylight: 450 mm 5. Maximum daylight: 1900 mm 6. Minimum mold height: 450 mm 7. Maximum mold height: 950 mm 8. Distance between tie bars (H × V): 1465 × 1360 mm 9. Mold plate size (H × V): 1025 × 990 mm 10. Ejector stroke: 250 mm 11. Ejector force: 63 kN 12. Dry cycle time (Euromap 6): 3.6 s (Z) / 2.4 s (Stroke) 🔩 INJECTION UNIT 1 1. Screw diameter: 90 mm 2. Max. shot volume: 3180 cm³ 3. Max. shot weight (PS): 2880 g 4. Injection pressure: 1470 bar 5. Injection speed: 100 mm/s 6. Plasticizing capacity (3-zone screw): 270 g/s 7. Plasticizing capacity (barrier screw): 308 g/s 8. Injection flow rate: 465 cm³/s 9. Heating zones: 7 10. Installed heating power: 75 kW 11. Hydraulic pump drive: 100 kW Engel Linear Robot ERC53/1-E 22 Hotrunner Itodpfxswnqk Nj Afvsc 4 core pullers PC, ABS material

Condition: used, Year of construction: 2005, Technical details: screw size: 70 mm injection shot weight in Polysterol: 687 g/PS closing pressure: 3000 kN Itjdpfxewftr Dj Afvec weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! *

Condition: excellent (used), Year of construction: 1996, Engel ES 3550/650 Clamping force 650 t Clamping force up to 725 t Year 1996 Tie bar distance 102.5 x 92.5 cm Itsdpfx Aoxvmmyofvjc Screw diameter 90 mm Shot weight 2400 g Shot weight 2230 g Tie bar spacing 92.5 x 102.5 cm

Condition: good (used), Year of construction: 2002, Engel ES200/45VTHL-PRO-ELAST (2002) Ijdpjvy Anxsfx Afvotc Clamping force: 45 t Type: Vertical Drive: Hydraulic Machine for Rubber.

Condition: used, Year of construction: 2003, Injection molding machine Engel HL 7050/600, year of manufacture 2003. The Engel is equipped with a 120 mm screw. The machine features a single-cavity shut-off nozzle for the mold, as well as a shut-off device in the injection unit. In 2020, the Engel received new pumps. Operating hours: 70,366 h. Ijdexwll Rjpfx Afvstc The machine is still in production.

Condition: used, Year of construction: 2000, Injection moulding machine Engel ES 1350/275 HL, year of manufacture 2000 Itsdpfxjxx T Dds Afvec