Edge banding machine

Format4 45.03 LX

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 4,650 h, edge thickness (max.): 3 mm, product height (max.): 45 mm, product height (min.): 10 mm, product length (min.): 140 mm, product width (min.): 70 mm, TECHNICAL DETAILS Machine stand: tempora 45.03L, made of thick-walled electro-welded steel construction Control x-motion plus control: Swiveling 15" smartouch Unlimited storage space for user-defined edge programs Fine adjustment of the path parameters Optimization of edge overhangs when pre-cutting at the front and rear Chain feed Feed speed: 9 m/min Drive motor: 1.5 kW (S6) Precision running and guide surfaces Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm Segmented, rubberized support pads with quick-change system Rotary table edge magazine Roll edge material diameter: 740 mm Roll edge material edge thickness: 0.4 - 3 mm Pull-out frame Workpiece support: extendable up to 450 mm with roller conveyor for ergonomic working with larger workpieces Upper Pressure beam Workpiece height: 8–45 mm Pressure beam made of welded, torsion-resistant steel construction Top pressure rollers arranged in two rows Edge feed Driven rubberized feed roller Edge thickness: 0.4 - 3.0 mm Workpiece feed Extendable workpiece support: up to 450 mm Chip removal joining unit: 0 - 2 mm (on the feed ruler), digital counter Ksdpfx Abowwq Dzozewu Joining unit Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm 2x1.1 kW (1.5 HP) Chip removal: max. 2 mm Workpiece height: max. 45 mm Joining cutter with diamond cutting edges Z2+2, D-80 x 49 mm (angled and tear-free workpiece edge) Glue unit Glue unit: Teflon-coated, for 1.5 kg EVA or PUR Granules Heating time: 10 minutes Linear meter output: 375 linear meters (for 19 mm board) Finely adjustable glue roller Pressure unit 1 aluminum roller at a 90° angle 1 rubberized pressure roller Scissor shears Roll edge material thickness: 0.4 - 3 mm Used for pre-cutting, swinging Cross-cut saw unit 0.15 kW, speed 12,000 rpm with 90° round shaft guide Cross-cut saw unit with 45° travel path with 0.35 kW, 12,000 rpm A choice between 0° and 10° cut is possible Milling unit Multifunctional milling unit: x-motion plus, 2 high-frequency motors, 0.75 kW each, 12,000 rpm Alternating blades: 4 each Accuracy: 2-axis adjustment enables Fine adjustment in the 1/100 mm range Motorized corner rounding unit Corner processing unit for post and softforming profiles Workpiece height: 10 - 45 mm Edge thickness: 0.4 - 3 mm HW milling cutter with 2 cutting edges Radius: max. 6 mm Workpiece length: min. 270 mm (at 19 mm height) Radius scraper unit Processing of 2 mm plastic edges Adjustment of the scraper via digital counter and m-motion positioning system Scanning of the workpiece contours Polishing unit Upper and lower polishing unit Spray device for cleaning agent Surface scraper Upper and lower surface scraper for any adhesive residue. Scanning of the workpiece contours Multifunctional milling unit for cup hinge drilling for processing workpieces with cup hinge drilling, rear wall grooves and acute-angled workpieces

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 8 (12)* Panels thickness (min/max) mm 8 / 60 Numerical Control "StarTouch" + "Touch 7" Feeding speed m/min 12-18 Top pressure system with rubber belt (C.N.) Spraying unit (Anti-sticking liquid) AAR In-feed fence, adjustable by N.C. "EASY SIZE PLUS" Pre-milling Unit (vertical joint trimmers) 2 x Kw Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) "VC/800" - "VC/6" + "AirFusion AF15" Band Pressure zone (N.C. adjustment) Edge coils supporting unit - 1 Snipping (end-cutting) K/SEL Rough Trimming unit RS/K Fine Trimming unit RI / 800 (3 pos.) Multi Function Unit (Profile contour Trimming Unit) “4 EDGE” KIT Spraying Unit (for sliding liquid) Profile edge scraping unit RAS/1000 Glue scraper RCA / 2C Milling grooving unit K-100 (1 x Kw 1,8) 90° Kwodpexlqntofx Abzju Hot Air Heater (to reactivate the color of plastic tape) Panels Return System "SAG" Mod. SPINNER 47 / 63

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 915 kg, Worktable dimensions 3465x710mm, height 875mm Gluing thickness roller edges 0.4 - 3mm Glue-on thickness strip edges up to 5mm, min - max. workpiece thickness 8-50mm min. Workpiece length/width with roller edges 190/110mm min. Length of panel 120mm Feed speed 9 m/min Feed motor 0.55 kW Working air pressure of pneumatics 6.5 bar Suction hood glue container 80mm 2 suction hoods Flush trimming unit 60mm 2 extraction hoods Pre-milling unit 80mm Working temperature 20-190C° Equipment: Pre-milling unit (jointing) Rounding unit (corner copying) Kwedpjuacqzjfx Abzsu Gluing unit, applying and pressing on the edge (self-lubricating glue pot) Trimming unit, for cutting off 90° of the protruding edge at the front and rear Flush trimming unit (joining) Scraper unit Buffing unit Surface scraper Automatic application of the strip edges with edge magazine Kit for quick change of the glue container Device for heating the panel edge Non-stick agent spraying unit Spraying unit for finishing the edge

Condition: used, Year of construction: 2009, Used SCM edgebander model OLIMPIC K1000 Control panel with membrane keyboard Technical data: Min. panel height: 8 mm Max. panel height: 55 mm Min. edge thickness (roll): 0.4 mm Max. edge thickness (roll): 3 mm Max. edge thickness (solid wood): 12 mm Configuration: Strip edge magazine Glue pot capacity 1.5 kg, with independent motor No. 4 pressure rollers with pneumatic feed, first roller with independent motor Edge roll guillotine End trimming unit with 2 independent motors, tiltable 0-15° - each 0.35 KW - 12,000 rpm Overlapping trimming unit with 2 motors, each 0.65 KW - 12,000 rpm - tools with reversible knives Tiltable corner rounding unit for flat/radius finishing; 2 motors each 0.5 KW - 12,000 rpm, electro-pneumatic positioning - tools with reversible knives Electro-pneumatic exclusion of the unit Glue scraper unit Machine length: 4,310 mm Year of manufacture: 2009 Kwjdpfjxrndxex Abzeu CE marked

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Brand: SCM Model: OLIMPIC K 500 T/ER-2 - CE Automatic edge banding machine with sanding unit for wooden, veneer, PVC, melamine, ABS edges – suitable for furniture manufacturing, joinery, custom fittings, panels, kitchens, bathroom furniture, and various other applications Technical specifications: Min./max. panel height: 8–60 mm Panel height with corner rounding unit: 10–45 mm Edge thickness: 0.4–8 mm Edge thickness from coil: 0.4–3 mm Minimum panel width: 55 mm Feed speed: 11 m/min Pressure beam with motorized vertical movement Panel support rail Sound-insulated safety enclosure Fluid inlets Components: Anti-adhesive spraying unit with two nozzles – two tanks for anti-adhesion liquid Pre-milling units with two high-frequency motors – H64 mm diamond tools – diameter 100 mm, bore 30 mm, height 65 mm – copying set Gluing unit VC 560 for edge application on panels up to 60 mm – glue pot capacity: 1.5 kg – exchangeable glue pot End trimming unit with two independent motors, each 0.35 kW at 12,000 rpm – motor tilt from 0° to 15° – 2 saw blades, diameter 115 mm – front copying devices Tilting trimming/bevelling unit for removing top and bottom edge overhang – 2 motors at 0.55 kW – 12,000 rpm – tilt range from 0° to 25° – two-position pneumatic set for quick change between thin or radius edges Corner rounding unit with two motors on prismatic guides – for rounding and trimming thin or thick edges – 2 motors at 0.55 kW – 12,000 rpm Edge scraping unit for optimal finishing of ABS/PVC edges with rotary copying and extraction hood, scrap collection cassette Glue scraping unit – removes glue residues from the lower and upper panel surfaces Buffing unit for cleaning and polishing plastic edges – motor 0.25 kW – brush diameter 150 mm Compressed air: 7 bar Overall dimensions: 5500 x 1150 x 1550 (H) mm Weight: 1,780 kg Recently serviced New diamond pre-millers Kwsdpfx Abjxnvr Aszju New copying wheels...

Condition: used, Lange B90 KFE Edge thickness: 0.4 - 3 / 5 mm Control panel: PLC touch panel Pre-milling unit for workpiece edge preparation before the gluing section Automatic edge magazine for roll materials Teflon-coated quick-change glue pot for hot-melt adhesive granulate Workpiece height: 8 - 50 mm Fine-adjustable glue roller Guillotine shears up to 3 mm for pre-cutting roll material Kedpfxexl Aw Ts Abzowu Pressure unit End trimming unit Multi-function milling unit for flush trimming, radius milling, and bevel milling Corner copying unit for head edges up to 2 mm, activatable from the control panel Radius scraper blade Flat scraper blade Buffing unit Spraying device at infeed and outfeed Year of manufacture: 2018 Machine is OPERATIONAL and in GOOD CONDITION Ex works price NET €15,000.00

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2650x640x1400 mm Kedpfovz E T Hex Abzswu Weight 700 kg Total power requirement 5 kw