Car wash

Glogar L122

Year of construction: 2025, condition: new, Parts cleaning machine, spray cleaning system, type L122 Automatically operating hot water chamber cleaning machine with basket drive via geared motor, machine housing made of stainless steel 1.4301, - 2 sets of three-sided arranged nozzle systems made of stainless steel with stainless steel flat jet nozzles, - 2 stainless steel washing pumps (manufacturer: Xylem/Lowara), - Level control as dry-run protection - 2 suction filters as pump protection - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Usable height: 700 mm - Max. load weight: 300 kg - Spray pressure: 2 x 3 bar Fjdpfx Aohl Ic Rjkhsgf - Tank volume: 270 liters - Heating: electrically adjustable (RT - 60°C) - Connection power (electrical): approx. 11.5 kW - Machine dimensions (W x D x H): 1,480 x 1,540 x 2,195 (h) mm

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel Fjdpfx Asv Sq S Nekhegf • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean Fsdpfxsv Srgue Akhogf • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Year of construction: 2026, condition: new, Our belt presses can be dismantled and cleaned in just a few minutes without tools. The belt press is easy to operate. Effective belt cleaning is achieved by three spray nozzles and silicone wipers. Thanks to this innovative solution, the system can be operated for the economical production of fruit and vegetable juice. You don’t need a high-pressure cleaner, so you save on electricity costs when pressing. All you need is a compressor with 8-bar pressure and a ½" water connection. • Fully automatic and infinitely variable belt speed control • Easy to clean • Easier maintenance • Rolling machine feet • Automatic belt correction Technical Information Rated output: 350 kg/h Working width: 400 mm Juice yield: up to 75% Power consumption: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Air Operating pressure: 6 bar approx. 50 l/h Dimensions: Length: 1,080 mm Width: 1,070 mm Height: 1,320 mm Fodpfx Akjv Sq Nbehsgf Weight: 297 kg Optional: automatic juice draining

Year of construction: 2025, condition: new, In order to empty of fruit and vegetables of wood or plastic boxes in a washing machine, on a sorting conveyor or a bain-marie. The outlet amount from the box can be regulated about an infinitely variable hydraulic tilting equipment. The filling of the bin tipper is possible by means of heave stacker or hand elevating platform truck. Standard implementation: Lifting force: up to 550 kg / box Impulse engine power / elektr. Connection: 2. 2 kW/; 240 V, 3 phases, 60 hertz Fgjdscl Tx Dspfx Akhsf Weight: 350 kg Mass: 1680x1420x1255mm Sputum width: 500 mm Duration wheel process: 15sec.

Condition: like new (used), functionality: fully functional, This line is designed for the production of all types of juices and compotes. It is engineered for continuous processing of the final product, with adjustable capacity up to 2,500 l/h for juices and up to approximately 700 l/h for apple compote. For products with viscosities between juices and compotes (such as purées), throughput ranges from approximately 700 to 1,500 l/h. Fodpfxsynkgco Akhegf The line is suitable for a wide variety of applications, including pomegranate juice, apple compote, and similar products. The processing line is capable of heating the selected flow from an adjustable inlet temperature between 30°C/50°C (or as low as 20°C for juices) up to a pasteurisation temperature of 95°C, before cooling the product down for pouch filling, with a setpoint temperature at 75/80°C. INCLUDES: - LOAD CELLS FOR ACCURATE DOSING/MIXING - AUTOMATIC CIP CLEANING SYSTEM - MULTITUBULAR HEAT EXCHANGER THE LINE CONSISTS OF: - 2 TANKS: - BRAND: SACOME - AGITATOR MOTOR POWER: 2 HP EACH - MANHOLE INCLUDED - EQUIPPED WITH STAINLESS STEEL VACUUM PUMP - TOTAL TANK HEIGHT: 1.90 M - INTERNAL DIAMETER: 1.18 M - CAPACITY: 2,000 LITRES (EACH) - 1 DEAERATOR TANK: - BRAND: SACOME - CAPACITY: 700 LITRES - 45° CONICAL BOTTOM - SIDE MANHOLE INCLUDED.

Condition: new, capacity 750 l/h heater capacity 70 kW electrical power 1,1 kW electric outlet 400V 50Hz (three-phase) Fodpfxoyw Hu As Akhjgf fuse 16 A dimensions: length 1 165 mm width 795 mm height 1 805 mm weight 463 kg Gas consumption liquid gas approx. 5.5 l/h Gas consumption natural gas approx. 7.5 m³/h Max. exhaust temperature: 210°C

Condition: new, capacity up to 2400 kg/h power: drive motor 0,75 kW washing machine motor 0,37 kW electric outlet 400V 50Hz (3 phases) Fgedpfx Akoy At Elshof fuse 16 A dimensions: length 2 920 mm width 1 750 mm height 1 463 mm insertion resp. discharge height 1 290mm belt width 900 mm spread width 680 mm spread height (9 stages) 10 - 50 mm weight 1800 kg material 1.4301 / AISI 304 juice yield up to 75 % belt speed (continuously) 1,0 - 3,5 m/min lead time 1 - 4 min water consumption for cleaning 5 l/min connections: sewage connection DN75 juice discharge connection 1 1/2 " juice discharge height 300-440 mm sewage discharge height 64 mm pomace discharge height 790 mm suitable for pomaceous and stone fruit scope of delivery high-pressure cleaner, compressor

Condition: excellent (used), Juice extraction press for sale: - Flottweg B-FRU-1500 LR press, year 2004 - Pulp pump - Flottweg control cabinet - Juice pump - Slit filter for wash water from the belt Fgsdpoyc D N Tjfx Akhef The machine is in good working order and ready for operation. Please see my other listings.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, spindle speed (max.): 20,000 rpm, number of axes: 4, This 4-axis Brother TC-32BN QT was manufactured in 2008, featuring a Brother B00 control system, X-axis travel of 550 mm, Y-axis travel of 400 mm, and Z-axis travel of 415 mm. It boasts rapid traverse rates of 70 m/min, a spindle speed up to 20,000 rpm, and a tool magazine with 40 positions. Consider the opportunity to buy this Brother TC-32BN QT vertical machining centre. Contact us for more information about this machine. • Table-to-spindle nose distance: 645 mm • Table size: 425 × 600 mm • Tool magazine capacity: 40 positions • Spindle override Fjdpex D Rdrefx Akhogf Additional equipment • 2 × Lehmann 4th-axis tables with tail support • Chip conveyor