Used Altendorf F90 for sale (85)

Year of construction: 1977, Condition: good (used), Technical data: Njljhtavhjhcdw Nscp Engine power: 5,5 Kw sliding carriage length: 2600mm suction connection: 120mm Saw blade is not tiltable, no scoring device weight approx. 1,2 t.

Condition: excellent (used), Altendorf F90 Table length 275 cm cutt.- 120 cm undercutter Nelhcdwjv A T Are Njcp Motor 5.5 kW 0.75 kW

Condition: used, Saw blade diameter 400 mm Cutting height 130 mm cutting width 700 mm Cutting height at 45° mm Speed U/min. Ncslhcsvl Tq Isdw Nep Sawblade tiltable ° Length of the rolling table mm sawing motor 6,0 kW weight of the machine ca. 1,1 t dimensions 2,3 x 1,6 x 1,6 m sliding table saw - incl. suction unit - further accessories see pictures

Condition: ready for operation (used), Technical characteristics Carriage 3200 mm Blade Ø 400 mm Motor 5,5 kW Fixed blade Cutting height : 130 mm Rip fence 1200 mm with fine adjustment Ideal for carpentry Power and Motors Voltage: 380 V Pluging: Three-phased Power: 6 Kw Nsljuciqyohcdw Nscp Motor: 7,5 CV Overall dimensions

Condition: excellent (used), Year of construction: 1997, For sale is an Altendorf sliding table saw in very good condition. The saw can be inspected and tested on site. About the machine: - Sliding table 2800mm - Parallel stop 1050mm - Boom up to 3250mm - Height and tilt adjustment via foot pedal - Electronic tilt display - Year of manufacture 1997 - Max. 450mm saw blade - Scoring unit: no - Motor power 5.5kW Accessories: Miter gauge, 2nd saw guard, supports, tools, spare parts. Ncelov Syb Hehcdw Nop You will receive a VAT invoice.

Condition: new, Includes: * Machine height 910 mm * Eye-level operation * Template holder, directly on the control panel * Extended cutting height, single tilt, maximum blade diameter 550 mm * Extendable cross slide extension * 7.5 kW (10 HP) motor, 3 speeds * Preparation for 2-axis scoring unit Nelhcdwov S At Ss Necp * Table top extension 840 mm * Sliding table with carriage length 3200 mm * On/off switch on the sliding table * Miter gauge Optional: * DUPLEX 1350 mm (additional charge: €1100 net) Shipping via freight forwarder possible.

Condition: used, Year of construction: 2005, General SKU: R0856 Location: Barneveld Make: MavagAG(CH) Type: HP840 No.: 24.1801 Year of construction: 2005 Pressure Working pressure: 3.5Bar Ncolovzpgwshcdw Nep Vacuum possible: ✔ Working pressure jacket: 6Bar Vacuum possible jacket: ✔ Main Features Material: Stainlesssteel Surface: 6m2 Specified Features - Horizontal plate filter Material: Stainlesssteel1.4404 Plate filter: ✔ Without plates: ✔ Top connections: dia.80mm(1x)dia.50mm(2x)dia.25mm(1x) Solids outlet: dia.50mm Liquid outlet: dia.50mm With jacket: (50ltr) Max. temperature: -10/80degr.C With hydraulic drive: ✔ Motor: pneumaticdriven With pump: ✔ Capacity: 250bar Information Mounted on legs: ✔ Weight: 1300kg CE: ✔ Floorspace: 2,1x1,3M Total height: 2,5M Extra Specifications: WITHOUTFILTERPLATES What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, Motor power: 5.6 HP (4.2 kW), Cutting height (mm): 80 mm, Cutting width: 710 mm, Circular saw tiltable: 0-45 degrees, Circular saw blade diameter max.: 315 mm, Circular saw speed: 4100 rpm, Scoring unit: Yes, Extraction connection diameter: 120/80 mm, Scoring unit (motor 0.75 kW), Control: Manual, Sliding table length: 1600 mm, Working height: 920 mm Nelhcdwev Szirj Nocp

Condition: used, Format saw Ncslov Rdmkshcdw Nep Altendorf F45 Serial No. 89-4-347 Roller table 2800mm 380V - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1996, F45 type sliding table saw Tilting blade, scoring saw Lifting and lowering of the blade by foot with hydraulic pedal Ncolhcdwev N Uzce Njp Up and down adjustment and width of electric incisor Digital display for blade tilt Digital display of blade rotation speed 5.5kw motor Trolley length 320cm Cut to 135cm guide Blade maximum diameter 350mm Voltage 380V

Condition: used, Year of construction: 2022, Sonderpreis Ausstellungsmaschine Garbsen Formatkreissäge F25 CE Stk Ausstattung:5,5 kW (7,5 PS) zwei Drehzahlen (3600/4200 min)VorritzerLED Anzeige VorritzerParallelanschlag man. 1000 mm mit Digit XWinkelgehrungsanschlag manuell 3450mmgroße Schutzhaube315 mm Sägeblatt CE100 mm Schnitthöhe, 70 mm bei 45°Höhe u. Schwenkung manuellMaschinenhöhe 880 mmGewicht 735 kg Doppelrollwagen F25 3200mm Stk Upgrade Bremsgerät, beleuchtete Taster Stk Ncelev Rhtujhcdw Nep Lagerort: Garbsen

Condition: good (used), Year of construction: 1993, Altendorf Sliding Table Saw with Scoring Unit Ncelhcsv Nnz Ajdw Nsp Technical Specifications: F 45 Sliding Table Saw with pivoting saw unit and hydraulic height and tilt adjustment Double sliding table with steel guides, cutting lengths up to 3800 mm, cutting length 3200 mm, format 3200 x 3200 Anodized sliding table and parallel stop rail, as well as the stop and support rail of the cross slide. Automatic main saw blade brake (for drives up to 7.5 kW) Main saw blade drive: 7.5 kW (10 HP) 3000/4000/5000/6000 rpm. Scoring unit with 0.75 kW (1.0 HP) drive motor 9000 rpm, without saw blade, with electric height adjustment. Automatic contactor control with separate main switch, undervoltage release, and potential-free contact for controlling an extraction system. Digital display of the Main saw blade Digital tilt angle display (DIGIT 45) Cutting width at the parallel stop: 1300 mm Parallelogram guard Chip collector, 80 mm for machines with tilting saw blades (with narrow and wide guard) Table top extension (TPL) 800 mm Location: from stock, 54634 Bitburg - available immediately -

Year of construction: 1998, Condition: used, General SKU: 251U330 Location: Barneveld Make: Mavag/EHWThale .: 612045 Pressure Working pressure: 6Bar Vacuum possible: ✔ Neleq Hw Ddshcdw Necp Main Features Material: Glass Motor: 15KW Surface: 3m2 Specified Features - Nutsche filter Nutsche filter: ✔ Filter surface: 3m² Capacity: 3500l(bruto5900l) Vessel sizes: Dia:2000x1500mm Plate sizes: Dia:2000mm Top connections: DN80(6x),DN50 Solids outlet: DN300 Liquid outlet: DN80 Max. temperature: 0ºC/+100ºC With stirrer: hasteloy2.4602stirrer Motor: 15kW,(Ex400V)1455rpm Stirrer speed: 3-25rpm(reversibel) Cake thickness: max500mm Cake capacity: ±1570l Stirrer can be lifted: ✔ With hydraulic unit: ✔1,5kW(Ex,230/400V) Material: Glass-Enamel,Stainlesssteel2.4610(HastelloyC-22) Information Year of construction: 1998 Mounted on legs: ✔ With switchgear: ✔(asis) Floorspace: 2,4x2,4m CE: ✔ Total height: 5,75m Weight: 3790kg Extra Specifications: Underopening,dam.2,0mtr,manhole500mm,coveronwheels,withStahlCont rol,typeExicom9752,(Ex),sMaierHasteloy2.4602stirrer,typeBreviniET 3090F3,i=100 What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, Year of construction: 2011, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut stop: 3200 mm Cutting depth: 154 mm Scoring cutter: no / preparation Sawblade height adjustment: electric / position control Sawblade swivel adjustment: electric / position control Width stop adjustment: electric / position control Crosscut stop adjustment: manual Sawblade angle display: digital display Cutting height display: digital display Width stop display: digital display Crosscut ruler display: digital display Digit L Crosscut ruler with miter function: yes Sawblade diameter: 450 mm Speeds: Vario Motor power: 5.5 kW Spray device: yes Extraction connection: 80 and 120 mm Machine length: 3600 mm Machine width: 2200mm Weight: 1200 kg Ncslhjv N Tykocdw Nop

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Altendorf WA80 Sliding Table Saw Working carriage length 3200mm Cutting width on the right side 1300mm Saw size max 400mm Ncolov Sipgshcdw Nop Cutting height max 125mm Cutting height max at 45° 87mm Electric adjustment of the saw angle up to 45° Electric lifting and lowering of the worktop Main engine with a power of 5.5kw Scorer engine 0.75kw Variable saw speed on the belt 3000/4000/5000r.p.m CE certificate DTR documentation

Condition: used, Year of construction: 1994, Length of sliding table: 2.800 mm Cutting width: 1.300 mm Cutting height max: 100 mm Saw blade diameter max: 350 mm Saw blade height adjustment: electro-motive Saw blade tiltable: electro-motive Main motor power: 7,5 kW Rotation speed steps: 2 Scoring aggregate: Yes Scoring saw height adjustment: electro-motive Controlled axes: Yes Number of controlled axes: 3 Parallelanschlag, Digitalanzeige: Yes Winkelanschlag, Digitalanzeige: Length Ncelhcdwjvyx Nle Nop Double mitre fence: Yes

Condition: new, Year of construction: 2022, Functionality: fully functional, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,000 mm, saw blade diameter: 500 mm, table height: 910 mm, pivoting range: 46 °, Equipment: scorer, New demo machine with all documents Ncolhcdov Nv Nhow Nep

Year of construction: 2022, Condition: new, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm. Nolhcjmrxznsdw Nocp

Condition: used, Year of construction: 1998, Schiebeschlitten: 1600 mm Sägeaggregat starr Höhenverstellung über Handrad max. Schnitthöhe ca. 85 mm max. Schnittbreite am Parallelanschlag 800 mm mit Tischverlängerung max. Sägeblattdurchmesser: 315 mm Ncolhsv Iq Dqscdw Nep Lagerort: Lieferant

Condition: used, CATALOGUE NUMBER 7580 TECHNICAL DATA - max. main blade diameter 400mm - max. cutting height 100mm - main blade adjustable up/down - spindle diameter 30mm - spindle locking - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1000mm - with side trolley - main motor approx. 5.5kW - scoring unit motor 0.75kW - scoring unit diameter 120mm Nelhcev In Rnodw Njcp - 4 types of rotation speeds 3000/4000/5000/6000rpm - diameter of the exhaust port 110mm - table top dimensions with extension 1250x1220mm - disc guard - dimensions length/width/height 2900x2840x1430mm – weight 820kg ADVANTAGES – German production – with scoring saw – used saw, very good condition Net price: PLN 11,500 Net price: EUR 2,700 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, EvoDrive control Motorized height and swivel adjustment Ncelhev Ib Elocdw Nep Two-sided swivel +/- 46° 6.5 kW Vario motor Infinitely variable speed 205mm cutting height Double sliding carriage 3200mm On-off switch on the sliding carriage Table top extension Angle miter stop with length compensation Cutting width on the parallel stop 1000mm Digital display on the parallel stop DigitX Front support roller Altendorf LASER cutting joint display Duplex double-sided miter stop

Condition: used, Year of construction: 2023, Length of sliding table: 3.200 mm Cutting width: 1.000 mm Cutting height max: 150 mm Saw blade diameter max: 450 mm Saw blade height adjustment: electro-motive Saw blade tiltable: electro-motive Njlhcdwov I Up Ds Nocp Main motor power: 5,5 kW Rotation speed steps: 3 Controlled axes: Yes Number of controlled axes: 2 Conformity marking: CE mark

Condition: used, Year of construction: 2000, General SKU: 446W1484 Location: Barneveld Nslhcdwovk Hgtj Njcp Make: MavagAG Type: 50305 Machine number: 20.2400-I Pressure Working pressure: 0.5Bar Vacuum possible: ✔ Working pressure trays: 8Bar Main Features Material: Hastelloy Volume: 1850Ltr. Surface: 7.5m2 Specified Features - Tray dryer Tray dryer: ✔ Stainless steel housing: ✔ Stainless steel trays: ✔8pieces,volume55l.(material2.4605,Hastelloy) Heating surface: 7,5m² Drying chamber capacity: 1850l. Drying chamber sizes: 1050x900x1300mm Max. temperature: -30°C/+200°C Number of trays: 8 Tray sizes: 1050x900mm Distance between the trays: 150mm Tray capacity: 55l. Max. temperature: -30°C/+200°C With containers: ✔26pc Container sizes: 990x320x50(material2.4605,Hastelloy) With 1 door: ✔ Connection for the vacuum pump: ✔ Connections: ✔ With vacuum pump: ✔ Motor: 4,36-8,7kW,380volt,1450rpm Material: Stainlesssteel2.4605(HastelloyC-22) Information Year of construction: 2000 Mounted on frame: Onlegs With switchgear: ✔(asis) Floorspace: 1,60x1,50m Total height: 2,10m Weight: 1750kg Extra Specifications: Withfilter,volume24l.,jacketvolume5l., Thubastainlesssteelc ontrol,(Ex)Withtray’s,andMavagmobilestainlesssteelCIPvessel,volum e220l. erenceoftheothermachine:sku446W1548 What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: new, Year of construction: 2022, Altendorf: F 25 Version 6 - 4 KW (5.5 HP), 1 speed - Parallel stop 1000 mm - Double sliding table 3200 mm - Manual miter stop - Splitting wedge Extractor hood - Without scoring unit (prepared for the subsequent - installation of a scoring unit) The ALTENDORF F 25 offers everything that a panel saw needs to be able to do in a small space. Whether in your first own workshop, for daily use, in industrial production or as a powerful second machine. The F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials Ncjlhcevk R Alsdw Nsp or extruded profiles can be processed easily thanks to the best precision, easy handling and excellent cutting quality. The one-sided swiveling saw unit also enables angle cuts. The smooth-running double sliding table based on the Altendorf system is part of the standard version, as is the digital display of the height and swivel. A machine for beginners and professionals alike. Double sliding table, swiveling, manual height and swivel adjustment, parallel stop with manual. Fine adjustment, Angle miter stop, Preparation for subsequent installation, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, Carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, Max. saw blade Ø: 315 mm, Max. saw blade projection: 104 mm, Non CE version: Max. saw blade Ø: 350 mm, Max. saw blade projection: 121.5 mm, Crosscut stop extendable up to: 3,450 mm, Speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, Work table height: 880 mm Special price from stock 54634 Bitburg - immediately available -

Year of construction: 2022, Condition: new, Altendorf WA 6 manual height adjustment, double roller carriage length 2000 mm scoring unit, swiveling, cantilever table, angular miter fence, automatic brake, lowerable below table height ----- Technical data ----- Swivel range: 0 - 45 °, cutting width at rip fence: 1.000 mm, max. cutting height: 87 mm, max. saw blade Ø: 315 mm, Swivel range miter fence: up to 49 °, Speeds: 4,200 rpm, Engine power main motor: 5.5 hp / 4 kW, Ncjlhjihahmocdw Nsp motor power scoring motor: 0,5 hp / 0,37 kW, Working table height: 910 mm, suction nozzle Ø: 1 x 100 / 50 mm each, weight: 450 kg Large suction hood Location: Ex stock 54634 Bitburg - immediately available - Location: Ex stock 54634 Bitburg - free on truck - - immediately available -