Used Altendorf Wa 6 for sale (106)

Condition: new, Sawblade tiltable ° Length of the rolling table mm cutting width mm Motor output kW Cutting height mm Cutting height at 45° mm Dqn2Nv Saw blade diameter mm Speed U/min. weight of the machine ca. kg -New-CE version- The WA 6 is the smallest Altendorf sliding table saw,that exist.- Despite its smaller dimensions, it impressesgreat achievements.- With her strong equipment she trumps herselfthe smallest space.- The cut quality and flexibility are excellentin daily hnical specifications:Sliding table length 2600 mmMotor 4 kW, speed 4200 ring unit 0.37 kWCutting height max. 100 mm, at 45 ° max. 72 mmmanual height and swivel adjustment 0-45 °Cutting width 1000 mm, manually adjustableCutting to length at the crosscut-miter fenceup to 2600 mmExtraction connection top / bottom 50/100 mmWeight 550 kgWorking height 910 mm

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Bsmcvyal2Ty Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg - new exhibition machine -

Condition: good (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 09-10-80-014, cutting width (max.): 1,000 mm, Connected load 380V Ue93Alss89 Motor power 4kW scoring unit with saw blade D. 20 mm shaft D=22 mm Automatic star-delta switching Swivel and height adjustment via hand crank Trimming table length 2600 mm cutting width 1000 mm saw blade D. up to 315 mm Cutting height 87 mm Angled mitre fence Extraction nozzle 1x100mm 1x50mm Saw blade protective cover

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 350 h, cutting width (max.): 2,600 mm, cutting height with scoring (max.): 87 mm, cutting height (max.): 87 mm, saw blade diameter: 315 mm, cutting width at rip fence: 1,000 mm, cutting length (max.): 1,225 mm, table length: 2,000 mm, power: 4 kW (5.44 HP), Equipment: motor brake, scorer, Show-room-machine used only sporadic (max. 350 hours total) Bob2Gd88As7

Year of construction: 2022, Condition: new, Altendorf WA 6 manual height adjustment, double roller carriage length 2000 mm scoring unit, swiveling, cantilever table, angular miter fence, automatic brake, lowerable below table height ----- Technical data ----- Swivel range: 0 - 45 °, cutting width at rip fence: 1.000 mm, max. cutting height: 87 mm, max. saw blade Ø: 315 mm, Swivel range miter fence: up to 49 °, Speeds: 4,200 rpm, Engine power main motor: 5.5 hp / 4 kW, motor power scoring motor: 0,5 hp / 0,37 kW, Working table height: 910 mm, Mxxmok suction nozzle Ø: 1 x 100 / 50 mm each, weight: 450 kg Large suction hood Location: Ex stock 54634 Bitburg - immediately available - Location: Ex stock 54634 Bitburg - free on truck - - immediately available -

Condition: used, Year of construction: 2024, Sonderpreis – Ausstellungsmaschine Grundmaschine WA 80 TE Edition 2| 1,00| Stk| | | | TECHNISCHE DETAILS - Bedienpaneel im Maschinenständer - Motorleistung 4,0 kW (5,5 PS), 1 Drehzahlen, 4000 U/min. - Wagenlänge 3000 mm, Schnittlänge 2905 mm - Sägeblattdurchmesser max. 450 mm, - Schnitthöhe max. 150 mm, bei 45° max. 103 mm - Parallelanschlag mit manueller Verstellung, - Schnittbreite 1000 mm - Höhenverstellung elektromotorisch mit Linearführung, wartungsfrei - Schwenkwinkelverstellung elektromotorisch 0 - 45° - Digitale Schwenkwinkelanzeige - Winkelanschlag mit fester 90°-Position, manuell einstellbar über Maßskala bis bis 3200 mm, - Maschinengewicht 1000 kg - Arbeitstischhöhe 910 mm - Werkzeugspannsystem AKE für das Hauptsägeblatt | Grundmaschine Technische Daten : Platzbedarf WA 80 ANSCHLUSS DER STAUBABSAUGUNG| | | | | | | | | | Absaugung oben| Ø = 80 mm| | | | | | | | | Absaugung unten| Ø = 120 mm| | | | | | | | | Unterdruck| 1200 Pa bei Ansauggesamtanschluss, Ø = 140 mm| | | | | | | | | Luftverbrauch| Vmin= 1110 m3/h bei 20 m/sec.| | | | | | | | | ANSCHLUSSWERTE ELEKTRISCH1)| | | | Motor| 4 kW| 5,5 kW| 7,5 kW| Spannung| 380 - 420 V| 380 - 420 V| 380 - 420 V| Frequenz| 50 Hz| 50 Hz| 50 Hz| Nennstrom ohne / mit Vorritzer| 7,5 / 9,5 A| 11,5 / 13,5 A| 15,5 / 17,5 A| Absicherung| 25 A| Dqmfbb 25 A| 25 A| DOPPELROLLWAGEN-SCHNITTLÄNGEN| | | | | | | Maximale Schnittlänge bei Einsatz von Klemmschuh oder Winkelanschlag| | | | | | | Wagenlänge| 2250 mm| 3000 mm| 3200 mm| 3400 mm| 3800 mm| 4300 mm| Schnittlänge| 2150 mm| 2900 mm| 3100 mm| 3300 mm| 3700 mm| 4010 mm| | | | | | | | | | MAXIMALER SÄGEBLATTÜBERSTAND| | | | | | | unabhängig vom Vorritzer| | | | | | | Sägeblattdurchmesser| 250 mm| 300 mm| 315 mm| 350 mm| 400 mm| 4502)| Sägeblattüberstand 90°| 0 - 50 mm| 0 - 75 mm| 0 - 82 mm| 0 - 100 mm| 0 - 125 mm| 13 150 mm| Sägeblattüberstand 45°| 0 - 33 mm| 0 - 50 mm| 0 - 56 mm| 0 - 70 mm| 0 - 87 mm| 6 - 103 mm|

Condition: new, The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful Bsmdfsu0Wjc second machine. - The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality can be easily processed. The one-sided swivel saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 06-10-20-060, cutting width (max.): 3,300 mm, cutting height (max.): 130 mm, saw blade diameter: 400 mm, cutting width at rip fence: 1,300 mm, cutting length (max.): 3,100 mm, main saw diameter: 400 mm, total width: 5,000 mm, height adjustment type: electric, overall weight: 810 kg, table length: 1,750 mm, trimming length: 3,100 mm, table height: 870 mm, table width: 1,550 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 5,000 rpm, length stop: 3,300 mm, power: 5.5 kW (7.48 HP), space requirement length: 5,000 mm, space requirement width: 5,000 mm, Equipment: lighting, motor brake, scorer, Altendorf sliding table saw WA 80 with scorer Double roller carriage: 3200 mm Cutting length: 3100 mm Cutting height: 130 mm Saw blade diameter max. 400 mm, can be lowered below table height Height adjustment: electromotive with linear guide, maintenance-free Angle adjustment: up to 45° electromotive, travel speed: 12 sec. from 0 to 45° Digital swivel angle display Cutting width: 1300 mm on rip fence Attention: without fine adjustment Motor power: 5.5 kW (7.5 HP) Uhict7Svwj Speeds: 3000/4000/5000 rpm Interior lighting of the engine compartment Milling tools up to 15 mm can be used Scoring unit: with rapid lowering and mechanical height memory Extraction nozzle: outside the machine stand Recessed grip in the machine table Mechanical locking of the rip fence in front of the saw blade Saw blade Laterally adjustable Altendorf extraction hood Narrow and wide extraction hood Angle mitre fence for easy adjustment and reliably reproducible 90° Tilting fences with fixed clamping on both sides Please note: --- The buyer is responsible for loading and removal of the machine ---

Condition: good (used), Year of construction: 2010, net weight: 850 kg, Sliding table saw Altendorf WA 80 TE Machine no. 10-07-21-025 Year of construction 2010 Saw blade 400mm Rolling table 3200mm Can be tilted 45 degrees Max. cutting height 130mm 400V Main engine 5.5kW Scoring motor 0.75kW Bpzmkpbb Electric height adjustment Electric tilt Transport dimensions: 3200x1100x1100mm, weight 850kg

Condition: new, Year of construction: 2024, Altendorf sliding table saw WA 80 TE WA 80 Performance that inspires. The WA 80 sliding table saw masters every material challenge with you: regardless of whether you are processing wood or plastic. With its strong heart and robust character, the WA 80 masters all cuts - from simple format cuts to complex angles and miters. Developed and assembled entirely in Germany, this sliding table saw has redefined the standards for classic workshop machines. It is a guarantee of success for every business. For yours too! Control panel on the machine stand You can control the height and tilt adjustment of the main saw blade at the touch of a button. The tilt angle is clearly shown on the digital display. Rip fence with manual fine adjustment Osndl3Jgnd The fence is easy to adjust and can be manually set very precisely thanks to the fine adjustment. If large panels are to be split, the fence can be swiveled under the table level using a handle. Double trolley Trolley length 3000 mm The large double castors hold the upper carriage in conjunction with the lower carriage with absolute precision in the respective guide rods. The trolley is easy to set in motion with little effort and runs safely as if on rails. This running quality is maintained even after decades of use and soiling Max. cutting length 3,000 mm Max. cutting height 150 mm Max. cutting width 1,000 mm 1 x M51061 Surcharge: 5.5 KW (7.5 HP) with 3 speeds 1 x M44054 Angle mitre fence, def. up to 3500 mm 1 x M44071 Rip fence 1000 mm From stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, The WA 8X series convinces above all by its enormous stability. For you, no matter what material you use - whether panel materials or solid wood - the WA 8X masters every challenge with a maximum saw blade projection of 125 mm. E8Rxbomcs Another important feature: the variety of options. You can equip your machine according to your needs! This has the advantage for you that your machine then fits exactly to your workshop and your work processes. Saw blade adjustment Motorised rise/fall and tilt adjustment 0-46° for the main saw blade Digital display of the tilt angle Saw blade diameter 400 Saw blade protrusion 90° 0 - 125 mm Saw blade protrusion 45° 0 - 87 mm Scoring unit Control panel at eye level Sliding table table length 3200 mm, incl. infinitely adjustable top carriage locking Rip fence, cutting width 1300 mm CNC rip fence Crosscut fence with fixed 90° angle manual adjustment using graduated scale up to 3200 mm Motor 5,5 kW TABLE HEIGHT 910 mm

Condition: excellent (used), Altendorf WA80 format saw Length of carriage 3200mm Cutting width on the right side 1300mm Undercutter Cutting height max 120mm Electric adjustment of the saw angle up to 45° Electric lifting and lowering of the worktop Main motor 5.5kw Undercutting motor 0.75kw Belt variable saw speed 3000/4000/5000r.p.m Dpe8Dh Maximum saw size 400mm CE certificate

Condition: new, ALTENDORF WA 80 TE sliding table saw - Exhibition machine - Lpddeod Includes: - ALTENDORF WA 80 TE sliding table saw rip fence manual adjustment - without scorer - Includes: - Motor 5.5 kW (7.5 HP) with three speeds ALTENDORF 3,000 / 4,000 / 5,000 rpm manually adjustable Includes: - ALTENDORF scoring unit with electromotive height and manual manual lateral adjustment. Includes: - ALTENDORF angle mitre fence Cutting to length up to 3,500 mm Manual angle adjustment by 49°, with length compensation - new exhibition machine -

Year of construction: 2021, Condition: excellent (used), Cutting length 2,000 mm Cutting width 1,050 mm with manual adjustment and manual fine adjustment Manual height adjustment of the saw blade Bf8P7E2Drcc Angle stop, cutting lengths up to 3200 mm Drive power 5.5 kW with 3 speeds 3/4/5000 rpm. Cutting height max. approx. 140 mm Saw blade diameter max. 400 mm CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 2005, net weight: 850 kg, Sliding table saw Altendorf WA 80 Machine no. 05-03-505 Year of construction 2005 Saw blade 400mm Rolling table 3200mm Can be tilted 45 degrees Max. cutting height 130mm 400V Main engine 5.5kW Scoring motor 0.75kW Electric height adjustment Bsfpr78Z7Y3 Electric tilt Transport dimensions: 3200x1100x1100mm, weight 850kg

Condition: new, Year of construction: 2023, Altendorf: F 25 Version 6 - 4 KW (5.5 HP), 1 speed - Rip fence 1000 mm - Riving knife Extraction hood - Without scoring unit (prepared for the subsequent - installation of a scoring unit) The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality can be easily processed. The one-sided swivel saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, Sigcqubmw work table height: 880 mm Special price ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), PART NUMBER 7394 TECHNICAL SPECIFICATIONS - max diameter of main disc 380mm - max cutting height 110mm C93Gqfm - main disc adjustable up/down - spindle diameter 30mm - spindle locking - with format carriage - cutting length on the carriage 2560mm - cutting width at the guide 810mm - with side carriage - main motor 5,5kW - dimensions of table top 1250x730mm - blade guard - dimensions L/W/H 2580x2570x1050mm - weight 780kg ATTRIBUTES - made in Germany - unpainted - used saw, very good condition Net price: 7900 PLN Net price: 1790 EUR depending on the price 4,4 EUR (Prices may change with higher fluctuations)

Condition: like new (used), Producer: Altendorf Model:WA 80 Additional on/off switch for the main saw and the bottom cutter on the carriage Electric motorized extension and tilting of the main saw 5.5 kW motor Double-guided carriage on steel guides (Altendorf patent), locking in end and center position, length 3200 mm 0.75 kW lower blade Dqmcxt Cutting width up to the rip fence on the right: 1350 mm Parallel example on the left side Disc diameter max. Ø 500 mm Table extension 840 mm

Condition: used, Year of construction: 2010, Carriage length: 3000 mm Cutting width at the width stop: 1250 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric Cocmg8Wik Adjustment of crosscut fence: manual Saw blade angle display: digital display Cutting height display: - Width stop display: Digital display Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 5.5kW Suction connection: 80 and 120mm Machine length: 3200mm Machine width: 2200mm Weight: 1200 kg

Condition: good (used), Year of construction: 1994, Functionality: fully functional, cutting height (max.): 170 mm, saw blade diameter: 500 mm, type of input current: three-phase, slide length: 3,200 mm, table width: 1,200 mm, power: 5.5 kW (7.48 HP), Equipment: motor brake, Altendorf F45 Elmo 2 - Precision sliding table saw in top condition For sale is an Altendorf F45 Elmo 2, a high-quality sliding table saw that is ideal for precise cuts in wood, plastic or composite materials. This machine impresses with its versatility, accuracy and robust construction - perfect for demanding carpenters and joiners. The saw was used in a one-man workshop and is for sale due to the closure of the business. Technical details: - Cutting length: 3,200 mm - Cutting height: 170 mm at 90°, 120 mm at 45°] - Saw blade diameter: 250-500 mm - Motor power: 5.5 kW / 7.5 hp Dqobxh - Angle adjustment: Electronic from 0° to 45° - Height adjustment: Electronic - Sliding carriage: Precision aluminum carriage, smooth-running and durable - Operation: Intuitive control panel with digital displays Condition: The machine has been regularly serviced and is in very good technical and visual condition. All components work perfectly, the sliding carriage runs precisely and the electronics are fully functional. Scope of delivery: - Saw blade - Duplex fence and angle guides - Operating instructions - Tool set for maintenance Special features: The Altendorf F45 Elmo 2 is known for its long-lasting quality and excellent cutting performance. This machine is ideal for workshops that focus on precision and efficiency. The machine can be viewed and tested by appointment. Assistance with dismantling and transportation is also available on request. Function can be seen under the Youtube video. More machines on our site.

Condition: used, Year of construction: 2005, machine/vehicle number: 05-05-027, Saw blade diameter: max. 450 mm Dqomy9

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 24-10-12-064, ALTENDORF F45 ProDrive sliding table saw Exhibition machine Order no. 24-10-12-064, year 2024 Item number: JA_G241201 Machine description Dqoobj Cutting height 90° max. 179 mm Motorized adjustment Scoring unit 2-axis Cutting width 1300 mm Motorized adjustment Carriage length 3200 mm Saw blade tilt 0°- 45° Adjustment motorized Angle stop yes Power 400V / 50 Hz 5.5 kW Speed 2-6000 rpm Weight approx. 1000 kg Extraction 120 + 80 mm Dimensions LWH 3600 x 2100 x 1400 mm Accessories - Template holder - On / Off switch - Front support roller - LED lighting - Rapido - Palin Subject to errors and changes to technical features. Note: New machine: - Prices are collection prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (unless otherwise stated) - Subject to prior sale! - You will receive an invoice with VAT shown. - The buyer is free to inspect the items on site. - Our general terms and conditions apply. - Special agreements are only possible by written agreement. - Any items in the background of the picture are not included in the scope of delivery. - Saw blades are for illustration purposes only and are not included in the scope of delivery. Shipping options: - We will be happy to make you a transportation offer. - Collection from our location in Ottendorf-Okrilla, free of charge by arrangement. (Assembly and instruction of the goods for demonstration purposes is optionally possible by arrangement). - Optionally, our trained service personnel can set up the machine at your premises and give you a short briefing. Travel, travel and service times at an extra charge.

Condition: new, Sawblade tiltable ° Length of the rolling table mm cutting width mm Motor output kW Cutting height mm Cutting height at 45° mm Saw blade diameter mm Dqn2Mx Speed U/min. weight of the machine ca. kg The Altendorf F 25 offers everything in a small space,what a sliding table saw must be able to do. And that inuncompromising Altendorf quality.A machine for beginners and professionals ic equipment:- Manual height and swivel adjustment 0 - 46 °of the saw blade, with digital display- Drive power 4 kW (5.5 HP) with one speed,4200 rpm.- Sliding trolley, trolley length 3200 mm- Crosscut-miter fence, lengths up to 3450 mm- Braking device, illuminated button- saw blade diameter max. 315 mm,- Saw blade protrusion max. 104 mm- Cutting height 100 mm, 70 mm at 45 °- Machine height 88 cmPackage 3 including:- 5.5 kW (7.5 HP), 2 speeds- DIGIT X rip fence, 1000 mm- Large suction hood (PSV)- Basic scorer with LED lighting

Condition: excellent (used), Altendorf F45 format saw with carriage undercutter 0,75KW, electrically adjustable format table 320cm max width of cutting on the cul-de-sac on the right side 130cm, inclination 0-45 electrically adjustable top and bottom saw electrically adjustable motor power 5,5KW 3 cutting speeds Ce9Jkt9 saw max 500mm Machine checked, still performs its functions and holds angles, is fully operational possibility of presentation

Year of construction: 2022, Condition: used, Used machine Year of construction 2022 Equipment and technical data: U2Bvqpvdjn Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height when swiveling Control at eye level, swiveling Double roller carriage, carriage length 3,200 mm Parallel fence, DIGIT-X cutting width 1,300 mm incl. manual fine adjustment, Angle stop with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm AKE tool clamping system for the main saw blade Working height 91 cm Motor 7.5 kW 3 speeds Table top extension 1200 mm Front support roller 2-axis scoring unit one. Swivel With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , RAPIDO scoring system 0.75 kW (1 hp), 8200 rpm. The Altendorf double roller carriage is famous for its its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in to the undercarriage with absolute precision in the respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require lubrication. Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm. can be adjusted. When cutting to length up to approx. 1700 mm, the the roller-supported stable telescopic extension takes over the outer stop flap. When cutting mitres mitre cuts, the fence can be adjusted integrated length compensation, the fence can be infinitely variable dimensional accuracy without reclamping, without the use of additional setting gauges for the length compensation. Simply set the fence ruler to the desired angle according to the scale scale and then set the desired lengths on the stop flap. Shipping information: LxWxH: 320x220x180 cm Weight: 1100 kg Availability: short term Storage location: Röllbach