Used Altendorf F 45 for sale (104)

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is Hnjlhsmrxznoccqmol always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm.

Condition: excellent (used), Year of construction: 2014, Very well-maintained Altendorf sliding table saw with electronics. 5.5 kW saw motor. Pivoting. Scoring unit. Helhccswkrkvjqmjnl Feed unit.

Condition: good (used), Year of construction: 1992, Altendorf F 45 sliding table saw, built in 1992 Motor: 5.5 kW / 400 volts Cutting length: 2800 mm Cutting width: 1000 mm Pivoting up to 45° Speeds: 3, 4, 5, and 6000 rpm Max. saw blade diameter: 450 mm Max. cutting height: 155 mm Hnslhowhpngjccqmsl Parallel guard Fine adjustment on the parallel stop Miter stop 800 mm aluminum table extension

Condition: new, ALTENDORF F 45 EvoDrive sliding table saw with 7" touchscreen - Exhibition machine - Including: - ALTENDORF F 45 EvoDrive sliding table saw with 7" touch screen Includes: - DIGIT L angle mitre fence, ALTENDORF Cutting to length up to 3,200 mm Holhccqeu R S Aqemsnl Includes: - CNC parallel fence, 1,300 mm, ALTENDORF Traversing speed 250 mm/sec. with dimensional correction for tilted fence profile and with tilted saw blade Including: - ALTENDORF template holder Included: - Extended cutting height, 1-sided tilting ALTENDORF Saw blade projection max. 204 mm In combination with a scoring unit the max. saw blade Ø is 500 mm, or 179 mm cutting height. Includes: - 5.5 kW (7.5 HP) motor with VARIO ALTENDORF 2,000 - 6,000 rpm Includes: - Scoring unit 2-axle, 1-sided, ALTENDORF with motorized height and side adjustment Programmable scoring blade height with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - LED lighting on ALTENDORF scoring unit Including: - Double roller carriage 3,200 mm, ALTENDORF Including: - Front support roller ALTENDORF Width 300 mm - new exhibition machine -

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 18-12-12-030, cutting length (max.): 3,000 mm, cutting width (max.): 1,000 mm, cutting height (max.): 150 mm, saw blade diameter: 450 mm, power: 5.5 kW (7.48 HP), Equipment: scorer, We are selling our Altendorf ProDrive F45 due to a new purchase. Hjlhcswit Hcocqmenl For further details, please contact us via email or phone.

Condition: excellent (used), Year of construction: 1986, Used, good condition Make: Altendorf Type F45 Year of manufacture: 1986 Machine No. 86-4-143 GS-tested Hnelhccewhgd Ssqmol Motor: 5.5 kW Carriage length: approx. 2500 mm Cutting width: approx. 800 mm Pivotable up to 45° Saw blade diameter: 450 mm Parallelogram guard Miter stop Extraction connection: D 80 and 120 mm Space required: approx. 2500 mm x 1600 mm x 1500 mm Weight: approx. 1000 kg Storage location: 54634 Bitburg, Germany, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: new, Year of construction: 2025, Functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Hjlhccqjwf Hdgomonl Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Maximum sawblade projection: 150 mm Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

Condition: new, Year of construction: 2024, machine/vehicle number: 24-01-12-041, with 7" touchscreen and separate keyboard Machine height 910 mm, Operating at eye level with template holder, 2-axis scoring unit and extended cutting height, max. saw blade diameter D = 500 mm, max. saw blade projection 179 mm, Vario motor 7.5 kW (10 HP), Helhjf Dk Ixoccqmsnl LED lighting scoring unit, Table top extension 840 mm, Double-roller carriage 3000 mm, max. cutting length with scoring unit 2905 mm, On/off switch on the double-roller carriage, Angle miter stop, CNC parallel stop cutting width 1000 mm, Template holder, Front support roller, STEG, second support on the double-roller carriage, DUPLEX, double-sided miter stop, List price of the machine € 40,380.00 incl. freight and packaging (€ 690.00) + VAT Available immediately from the Seevetal warehouse, subject to prior sale, without freight, assembly and instruction

Condition: excellent (used), Year of construction: 2015, F45 2015 Sliding Table Saw F45 ElmoDrive Eye-level operation Template holder Max. blade diameter 450 mm Motor 5.5 kW (7.5 HP) VARIO Hjlhcswcpuvocqmenl 3-axis scoring unit with tilting Double-sliding table with a carriage length of 3000 mm TPL 840 mm CNC angle stop UNO 90 CNC parallel stop 1000 mm Collet set (2 pcs.)

Condition: used, Year of construction: 2018, Used machine Year of manufacture 2018 Basic equipment Electric height and tilt adjustment 0-46° with automatic cutting height correction when tilting Control at eye level, pivoting Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Max. sawblade projection 150 mm Max. sawblade diameter 450 mm Drive power 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height 91 cm Hnelhcewb Eitscqmol Productivity package Motor 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life. Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a max. sawblade diameter of 550 mm and a max. sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the max. sawblade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). Two-sided tilting! RAPIDO Plus 3-Axis Scoring Unit With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED Lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. Sliding Table with a Carriage Length of 3000 mm Basic Equipment Sliding Table with a Carriage Length of 3000 mm The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in the respective hard-chrome-plated guide rods. This running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-cavity system. The table surface is precisely planed and anodized. A hard-chrome-plated round bar, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. DIGIT-L Angle Miter Stop, Cutting to Lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the swivel angle is continuously adjustable by 49° and is digitally displayed. The play-free and robust stop flaps can be easily moved and adjusted as individual flaps over the entire range up to a maximum of 3500 mm. For cutting to lengths up to approx. 1700 mm, the roller-supported, stable telescopic

Condition: not inspected (used), Year of construction: 1979, Functionality: unexamined, Power rating: 380V 5.5kW Star-delta switch Edging carriage length: 3200 mm Height adjustment and tilting via handwheel Cutting width: 1000 mm Parallelogram guard with narrow cover Cross table with stop Rip stop Holjv Uqa Eehccqmsnl Scoring unit WITHOUT miter stop

Year of construction: 1980, Condition: good (used), Format panel saw Altendorf F 45 year 1980 S/N 80-8-203 Slide length: 2500 mm Height and swivel adjustment manual with wheel Motor power: 5, 5kW Cutting width: 800 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 Hnslhjipv Rleccqmol Weight approx. 1100 kg technical specification under subject

Condition: used, Year of construction: 2005, Functionality: fully functional, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 3,400 mm, height adjustment type: electric, worktable length: 3,400 mm, power: 5.5 kW (7.48 HP), Panel saw Manufacturer: Altendorf Type: F45 Elmo CE Helhccevnrmyeqmenl Year of manufacture: 2005 Carriage length: 3,400 mm Cutting width: 1,300 mm Cutting height: approx. 171 mm Max. saw blade diameter: 500 mm Speed: 2,000 - 6,000 rpm Cutting width adjustment: Electric Motor brake: Yes

Condition: good (used), Year of construction: 1990, cutting width (max.): 1,000 mm, cutting height (max.): 140 mm, table length: 1,400 mm, power: 5.5 kW (7.48 HP), Types:F 45 ,Machine nr:90-8-86 Hnolotxh Nishccqmjl

Condition: new, Year of construction: 2024, EvoDrive control Swivels +/- 46° on both sides - Electromotive height and tilt adjustment -46 to +46° for the main saw blade with main saw blade with automatic correction of the cutting height when Swivel of the saw unit - Control at eye level, swiveling - Double roller carriage, carriage length 3,200 mm On/off switch at the end of the sliding carriage Holhcohuph Dscqmsnl - CNC parallel fence 1300 mm cutting width - DIGIT L digital angle mitre fence with length compensation, manually adjustable with 2 stop flaps - Saw blade projection 204 mm, max. saw blade diameter 550 mm - Drive power 6.5 kW (VARIO, infinitely variable speed) - AKE tool clamping system for the main saw blade Preparation for retrofitting a scoring unit - Machine height 91 cm Table top extension 840 mm Front support roller Template holder DUPLEX mitre fence

Condition: new, Year of construction: 2024, Functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, power: 5 kW (6.80 HP), sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual Hnolsuh R R Eohccqmol - Template holder - On/Off switch on the double roller carriage - Front support roller

Condition: used, CATALOGUE NUMBER 7580 TECHNICAL DATA - max. main blade diameter 400mm - max. cutting height 100mm - main blade adjustable up/down - spindle diameter 30mm - spindle locking - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1000mm - with side trolley - main motor approx. 5.5kW - scoring unit motor 0.75kW - scoring unit diameter 120mm - 4 types of rotation speeds 3000/4000/5000/6000rpm - diameter of the exhaust port 110mm - table top dimensions with extension 1250x1220mm - disc guard - dimensions length/width/height 2900x2840x1430mm – weight 820kg ADVANTAGES – German production Hnolev In Rnohccqmjl – with scoring saw – used saw, very good condition Net price: PLN 11,500 Net price: EUR 2,700 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, CATALOGUE NUMBER 7075 TECHNICAL DATA - max. diameter of the main blade with the scorer 350mm - max. cutting height 100mm - main blade adjustable up/down - spindle diameter 30mm - spindle locking - with format carriage - cutting length on the carriage 2800mm - cutting width at the guide 1250mm - with side carriage - with the scorer Hnolhcsm Uc E Escqmel - max. diameter of the scorer 120mm - spindle diameter 22mm - 0.75kW scorer motor - 4kW main motor - 4 types of rotation speeds 3000, 4000, 5000, 6000, rpm - diameter of the exhaust port 140mm - table top dimensions 1220x730mm - blade guard - dimensions length/width/height 2920x3200x1000mm - weight 727kg Net price: PLN 11,500 Net price: EUR 2,680 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Saw blade diameter 400 mm Cutting height 130 mm cutting width 700 mm Speed 5000 U/min. sawing motor 5,5 kW weight of the machine ca. 0,85 t dimensions 3,0 x 1,5 x 1,2 m Sliding table saw - 10,000 mm parallel stop - Table length 30,000 x 1,500 - See pictures for additional accessories Hnjlhcewinyqjcqmsl

Condition: good (used), Year of construction: 1985, Functionality: fully functional, machine/vehicle number: 85-10-116, Equipment: scorer, Machine no: 85-10-116, Type: TKR 45 Table: 1400X400mm Vorrizer, Hnslswkha Tohccqmjl

Condition: new, The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. - The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality can be easily processed. The one-sided swivel saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Helou R S Hcjhccqmenl Double roller carriage, tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Condition: good (used), Year of construction: 1979, Sawblade tiltable nein ° Length of the rolling table 2800 mm cutting width 1250 mm Motor output 5,5 kW Cutting height 125 mm Hjlhccewgi Anoqmsnl Saw blade diameter 400 mm

Condition: new, Year of construction: 2023, The ALTENDORF F 25 offers everything that a sliding table saw a sliding table saw must be able to do. Whether in your first own workshop, for daily use, in industrial production or as a or as a powerful second machine. The F 25 is the space-saving all-rounder that simply makes you makes you more productive. Materials such as wood panel materials, Hslhceqvn Ruocqmonl solid wood, wood-like materials or extruded profiles can be easily processed thanks to optimum precision outstanding cutting quality. The one-sided swivel saw blade also enables angle cuts. The smooth-running double roller carriage, based on the Altendorf system, as well as the digital display of height and height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, 3200 mm swiveling, man. Height and swivel adjustment, parallel stop with man. Fine adjustment, angle mitre fence, large extraction hood, PSV ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Rip fence: 1,000 mm with Digit X Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 3,600 / 4,200 rpm, Motor power: 5.5 kW, 7.5 HP, work table height: 880 mm Type: F 25 Version 5 5.5 KW (7.5 HP) 2 speeds Rip fence Digit X, 1000 mm Large extraction hood PSV Without scoring unit, prepared for retrofitting a scoring unit installation of a scoring unit Special price ex stock 54634 Bitburg - available immediately -

Condition: ready for operation (used), Year of construction: 1974, Functionality: fully functional, machine/vehicle number: 74-4-10, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Hslheipvrbsccqmenl Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Saw blade diameter max. 400 mm Main motor 5.5 KW with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Hnolhccsu R S Dboqmjl Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm - new exhibition machine -