Used Alzmetall Ax 2/S for sale (140)

Year of construction: 1999, Condition: excellent (used), Drilling capacity (steel): 18mm Drilling capacity (cast): 23mm Pgolokytxzshccqnok Thread cutting (steel): M14mm Spindle holder: MK 2 Spindle stroke: 100mm Extension: 250mm Column diameter: 90mm Power: 0.55 kW Spindle speed: 125 – 2400 RPM / 225 – 4300 RPM

Condition: ready for operation (used), Year of construction: 1989, Functionality: unexamined, machine/vehicle number: 1441, spindle speed (max.): 3,000 rpm, spindle speed (min.): 200 rpm, total height: 1,500 mm, total width: 560 mm, total length: 800 mm, table width: 240 mm, table length: 250 mm, overall weight: 250 kg, With 2 grooves, including frequency converter for stepless speed use. Pgelhjv Iqqdjccqnok

Year of construction: 1984, Condition: ready for operation (used), drilling capacity steel/GG: 18/23 mm spindle taper: 2 MK arm length: 250 mm table size: 250 x 370 mm spindle turning speed range: 400 - 5000 rpm engine: 0,48/0,6 kW Pgelhek Tzu Reccqnsk space needed: 750 x 500 x 1670 mm weight: 130 kg

Condition: used, Year of construction: 2000, Technical details: bore capacity in steel (diameter): 18 mm throat: 250 mm Pslheu R Uncoccqnogk bore stroke: 100 mm bore capacity in cast iron: Ø 23 mm Distance spindle/table max.: 75 / 400 mm range of revolution per miute: 225 - 4.300 / 2x 8 step U/min spindle taper MT: MK 2 feed:: von Hand mm/U table surface area: 250 x 250 mm vertical adjustment: 325 mm table clamping surface LxW: 250 x 250 mm table rotating: 360 ° base plate surface area: 320 x 250 mm distance spindle center to floor plate:: 565 mm column diameter: 90 mm total power requirement: 0,55 kW machine weight ab.: 160 kg dimensions L x W x H: 0,9 x 0,6 x 1,1 m

Condition: used, Year of construction: 1996, Alzmetall Säulenbohrmaschine Type AB35/S Loading 300 mm Pgolhswd E T Deccqnjk Aufnahme MK-4 bj. 1996 Var. Geschwindigkeit. Kuhlung.

Condition: used, bore capacity in steel (diameter) 60 mm throat 400 mm total power requirement 4,4 kW weight of the machine ca. 1,7 t Pjlhccowftt Ijqnegk

Condition: good (used), Year of construction: 2001, Used Alzmetall drilling machine Pslhccqowc Nlbsnogk Type: Alzstar 40 s Capacity: up to 40 mm Year of manufacture: 2001

Condition: excellent (used), Year of construction: 2017, ALZMETALL ALZSTAR 30/S Drilling capacity in steel E335 (St 60) mm 30 Threading in steel E335 (St 60) mm M 16 Short spindle MT 3 Throat mm 293 Support surface of machine table mm 515 x 360 Spindle-to-table distance min./max. mm 132 / 724 Pelhccewc Auvjqnsgk Column diameter mm 115 Spindle stroke mm 140 Manual feed Power kW 1.0 / 1.6 Spindle speed 225 / 4300 Year of manufacture 2017

Condition: new, Alzmetall Alzstar 40/S pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/S Condition: new Drilling capacity steel E335 (St 60) 40 mm Short spindle MK 3 Spindle stroke 120 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 117/701 mm Feed manual Machine height without options approx. 1840 mm Net weight approx. 270 kg Spindle speed rpm 160-2250 Pgolhswbqbnsccqnek

Condition: ready for operation (used), Functionality: fully functional, Pillar Drill ALZMETALL AB5 / S Technical Specifications: Drilling capacity in steel ST 60: 50 mm Drilling capacity in steel ST 60: 65 mm Drill spindle mount: MT 5 Drill spindle stroke: 240 mm Thrust: 385 mm Max. distance from table to drill spindle: approx. 820 mm Max. distance from base plate to drill spindle: 1325 mm Drill spindle speeds: continuously adjustable from 40 to 800 rpm Drive: 380 V / 4 kW Pgjlhccswaihdjqnek Space requirement: approx. W 750 x H 2350 x D 1500 mm Weight: approx. 1500 kg

Condition: new, bore capacity in steel (diameter) 18.0 mm throat 190 mm bore stroke 80 mm morse taper 2 Kurzspindel MK turning speeds 225 - 4.300 U/min Pgslhsvixh Tjccqnjk voltage 400 / 50 Hz Volt table: 300 x 240 mm column diameter 65 mm engine output 0.37 / 0.55 kW weight 110 kg Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German

Condition: good (used), Functionality: fully functional, Data: Pjlhccqsv S H Tcenegk Tool holder MK 5--- Drilling capacity with ST60 50 mm--- Infinitely variable speed ranges approx. 40 - 180 rpm + 180 - 800 rpm--- 5 feeds 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev--- Table surface, 880 x 670 mm--- throat depth: 385 mm---

Condition: used, Year of construction: 1956, bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm table surface area ø 500 mm Pjlhccjvh I U Toqnsgk spindle taper MT 5 spindle turning speed range 40 - 800 U/min feeds 0,1/0,14/0,2/0,28/0,4 mm/U column diameter 220 mm distance between table/spindle max. 670 mm distance spindle/base plate 1180 mm total power requirement 4 kW weight of the machine ca. 1,4 t dimensions of machine L x W x H 1,5 x 0,75 x 2,4 m Accessories: drill chuck, coolant

Condition: excellent (used), Drilling capacity steel/GG: 32/45 mm Spindle mount: 4 MK Thrust: 300 mm Table size: 445 x 445 mm Quill stroke: 160 mm Spindle speeds: 57 - 1340 rpm Feed rates: 0.1, 0.2, 0.3 mm Drive motor: 380 V, 1.4/2.2 kW Pgolhcev D E Hlocqnek Space required: 920 x 620 x 1880 mm Weight: approx. 440 kg

Condition: new, ALZMETALL pillar drilling machine drilling capacity in steel 30mm Short spindle MK3, spindle stroke: 140mm, throat: 293mm, column diameter: 115mm, machine table usable support: 514x360mm, with T-slots 2 x 14mm x 224mm, distance spindle-table min./max. 132/724mm, machine table height adjustment by hand crank, feed by hand, machine height without options: 1790mm, net weight: 260 kg. - Speed infinitely variable 100-1800 rpm Pslhcceid I Ixsqnjgk Standard equipment: Mushroom pushbutton (latching) for EMERGENCY STOP, reversing switch for clockwise and anti-clockwise rotation, motor protection switch, speed adjustment stepless, speed display digital, protection class IP54, spindle protection with electrical fuse, painting: DD-structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein

Condition: used, Drill, pillar drill, column drill, column drill -Manufacturer: Alzmetall, pillar drilling machine type AB5/S -Engine: VKS 3 kW -Speed: 40 - 800 rpm, continuously variable right-left rotation -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev. -Table size: Ø 500 mm, travel 470 mm -Spindle holder: MK5 -Spindle stroke: 240 mm Pgelher Ngp Usccqnok -Projection: 380 mm -Column Ø: 220 mm -Dimensions: 1450/680/H2160 mm -Weight: 1262 kg

Condition: new, bore capacity in steel (diameter) 23.0 mm throat 250 mm bore stroke 100 mm morse taper 2 MK table: 370 x 300 mm turning speeds 225 - 4300 U/min column diameter 90.0 mm distance spindle /table 140 / 670 mm engine output 0.6 / 0.95 kW weight 175 kg Pgjlhccst Eivcjqnsk Machine height 1770 mm Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016

Condition: new, bore capacity in steel (diameter) 30.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 515 x 360 mm turning speeds 225 - 4300 U/min Pgolhsuhrcpsccqnek engine output 1.0 / 1.6 kW column diameter 115 mm distance spindle /table 132 / 724 mm weight 260 kg Machine height 1790 mm Furnishing: - stepless speed adjustment - Reversing switch for R / L run - digital speed display - Connector and cable mounted - Spindle protection with electr. validation - 2 mtr. Connection cable with plug 16A

Condition: new, ALZMETALL column drilling machine Alzstar 23 S Manufacturer: Alzmetall Type: Alzstar 23 S Condition: NEW Drilling capacity steel E335 (St 60) 23 mm Thread cutting Steel E335 (St 60) M 14 Cast EN-GJL-200 (GG20) M 16 Short spindle MK 2 Spindle stroke 100 mm Thrust 250 mm Column diameter 90 mm Pgolhccswbqf Hsqnek Machine table, usable support 370 x 300 mm T-slots, number x width x distance 2 x 14 x 160 mm Distance spindle-table min./max. 140/670 mm Hand feed Machine height without options approx. 1770 mm Net weight approx. 175 kg Drive stepless Motor 750 / 1500 rpm Power 0.6 / 0.95 kW Spindle speed rpm 225-4300 Standard equipment: Mushroom push button (latching) for EMERGENCY STOP Reversing switch for clockwise and counterclockwise rotation Motor protection switch Stepless speed adjustment Digital speed display Protection class IP 54 Connection plug (fully assembled, cable length 2m) Spindle protection with electrical fuse Paint: DD structural paint light gray RAL 7035, anthracite RAL 7016

Condition: excellent (used), bore capacity in steel (diameter) 45 mm throat 300 mm bore stroke 160 mm Polhccjvn U Umeqnsgk taper MK 4 table surface area 600 x 500 mm table adjustable 550 mm total power requirement 0,8 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,8 x 0,6 x 1,8 m

Condition: new, ALZMETALL Alzstar 18-T/S, Manufacturer. Alzmetall Type: Alzstar 18-T/S Condition: New Drilling capacity in St 60: 18 mm, Thread cutting in St 60: M 12, Thread cutting in GG 20: M 14, Short spindle: MK 2, Spindle speed: 225-4,300 rpm, Spindle stroke: 80 mm, Throw: 190 mm, Column diameter: 65 mm, Machine table - usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance spindle-machine table min./max.: 75/357 mm, Machine base plate usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance Spindle base plate min./max.: 437/437 mm, Feed by hand, Machine table height adjustment: hand crank, Total power requirement: 0.37/0.55 kW, Machine height: 840 mm, Weight: 110 kg Standard equipment: Main switch with motor protection switch, lockable Reversing switch for clockwise and counterclockwise rotation Infinitely variable speed adjustment Protection class IP 54 Mushroom push button (latching) for EMERGENCY STOP Spindle protection with electrical protection Optional: - LED machine light - Under table Polhccswbqd Nsqnegk - Drill chuck 1-13 or 3-16 Available now. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: good (used), Year of construction: 2011, Functionality: fully functional, ALZMETALL AX 4 / SV Pillar Drill 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: Used Year of Manufacture: 2011 Drilling Capacity: Steel E335 (St 60) 55 mm Thread Cutting: Steel E335 (St 60) M 42 Cast Iron EN-GJL-200 M 56 Short Spindle MT 4 Spindle Stroke 140 mm Usable Throat 300 mm Column Diameter 145 mm Machine Table, Usable Support 615 x 430 mm Spindle-Table Distance min./max. 150/735 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Feed rate 0.1 + 0.3 mm/rev Machine height: approx. 1850 mm Net weight: approx. 380 kg Pgolhewbqd Aoccqnjk Infinitely variable drive Motor: 1500 rpm Power: 3.0 kW Spindle speed: 70-2400 rpm Standard equipment: Main switch with lockable motor protection switch Mushroom push button (latching) for emergency stop Infinitely variable speed adjustment Digital speed display Feed overload protection Protection class: IP 54 Spindle protection with electrical protection Available options: – 12. Machine light – 20.1 Thread cutting device – 24. Coolant system in the base – 37.1 Digital drilling depth indicator – 50.6 Drilling depth fine adjustment 0.1 mm – Combination table – Original documentation

Condition: as good as new (ex-display), Year of construction: 2025, Functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Pelhewbqdpeccqnogk Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 30/S Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Cast EN-GJL-200 (GG20) M 20 Short spindle MK 3 Spindle stroke 140 mm Thrust 293 mm Pgslhewbqb Isccqnok Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 132/724 mm Feed manual Machine height without options approx. 1770 mm Net weight approx. 260 kg Drive continuously variable Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, ALZMETALL AX 3/SV pillar drilling machine (2017) Manufacturer: Alzmetall Type: AX 3/SV pillar drilling machine Year of manufacture: 2017 Condition: used Drilling capacity 40 mm Short spindle MK 3 Spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Machine height 1840 mm Net weight approx. 270 kg Drive continuously variable Spindle speed rpm 160-1125 rpm Standard equipment Main switch with motor protection switch, lockable Pjlewbqaqshccqnjgk Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Digital speed display Protection class IP 54 Spindle protection with electrical fuse Special options: – Digital drilling depth display – Combination drilling table Scope of delivery: – Documentation – Drill chuck