Used Elumatec Dg 79 for sale (91)

Year of construction: 2007, Condition: used, Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Automatic positioning of the saw unit via E 355 control Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Iolhcovza U Sedwvjtg Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-hand operation Material support mobile and fixed 850 kg

Condition: good (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 0799140181, cutting length (max.): 4,500 mm, saw blade diameter: 380 mm, Double mitre saw DG 79 used, year of manufacture 2018, mat. no. 0799140181 - Cutting length 4500mm - Saw blade diameter 380 mm - Swivel range from 0° - 45° infinitely adjustable to the left and right, therefore external and internal dimension cuts possible - Locking points at 15.0°, 30.0° and 45.0° - Hydropneumatic saw feed for precise saw cut - Infinitely variable with rapid traverse - Vertical and horizontal pneumatic material material clamping devices ensure optimum profile fixing Electronics E 111 - Manual cutting length adjustment with digital display - Switchover from absolute dimension to chain dimension - Actual value storage of the display when the power is switched off Technical data: - Smallest cutting length: 520 mm - Voltage: 400 V, 3 PH, 50 Hz - Power output per motor: 3000 W / 4.1 HP - Compressed air connection: 7 bar - Air consumption per work cycle without spraying: 35 l with spraying: 45 l Accessories supplied: - 2 HM saw blades (used) - Dosing spray device - Mobile workpiece support - Profi S3 mobile extraction unit Ijlhcdsu Hhmdswvstg

Condition: used, Year of construction: 1989, saw blade diameter 420 mm cutting length 6000 mm 150 mm turning speeds 2800 U/min engine output je 4,0 kW connected load 8,0 kW weight of the machine ca. 1,8 t Iolswfyqtjhcdwvjtg Dimensions (LxWxH) 7,0 x 1,5 x 1,5 m Double miter saw Minimum cutting length at 90° or 45°: 350mm Inward tilt range: 90° - 45° (up to 22.5° manually with digital display) Inward tilt range: 90° - 45° pneumatically Compressed air connection: 7 bar Including 3 spare saw blades

Condition: used, Year of construction: 2008, Double-head elumatec DG 142 for cutting PVC profiles. Control electronics E555. Options: Vacuum cleaners, short-length stop, profile lifters, rollers on the moving head 1.5 meters. Iolhcdwevxbcxjvjtg The machine has been completely renovated! In operation and ready for production!

Year of construction: 1985, Condition: good (used), Offer 22556 Technical data: - Saw blade diameter 420 mm - saw blade bore 30 mm - max. cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - cutting range see diagram enclosed Itolhcdsimdlrjwvjg - tilting range inwards manual 90 - 22,5 ° - inclination range inward manual 90 - 45 ° - Saw blade speed 2800 rpm - drive 380 V / 2 x 4000 Watt - Compressed air supply 7 bar - Air consumption per working cycle approx. 64 l - space requirement approx. W 4500 x H 1950 x D 1600 mm - weight approx. 1400 kg - with: - cutting length adjustment with positioning control - positioning control renewed approx. 2002 by WOLFF - saw unit swiveling and tilting for high and wide profiles, - as well as shift cuts

Condition: like new (used), Year of construction: 2003, Functionality: fully functional, cutting length (max.): 6,000 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 500 mm, saw blade diameter: 550 mm, pivoting range: 45 °, Brand new machine - never used! TECHNICAL DETAILS Maximum cutting length: 6,000 mm Minimum cutting length at 90°: 375 mm Minimum cutting length at 45° (inclined): 375 mm Saw blade diameter: 550 mm Saw blade speed: 2,250 rpm Inward tilt range (pneumatic): 90° - 45° Manual tilt range: up to 22.5° inward and up to 140° outward (with digital display) Inward tilt range (pneumatic): 90° - 45° Feed and connections X-axis feed length: 5,000 mm Y-axis feed length: 500 mm Input voltage: 400 V Compressed air connection: 7 bar Motor power per unit: 4 kW Itelhcev Rf Uvedwvjg MACHINES DETAILS Total width: 1,350 mm Total height: 1,550 mm Total weight: 1,850 kg EQUIPMENT - 2 additional heads included (4 heads included in total) - Bottom cutting possible for precise cuts - Pivoting and tilting saw units; intermediate angle manually adjustable - Includes cutting/excess length module, protective covers, and pulsed coolant system

Year of construction: 1991, Condition: like new (used), Machine is fully functional. Now is in stock. Ielhcehvrz Tedwvjtg 6.000 mm

Year of construction: 1997, Condition: used, Max. sawing length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Itslhcdsv I Uzgowvjg Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Moving roller conveyor Minimum quantity spray device label printers

Year of construction: 1991, Condition: used, ELUMATEC Double Head Saw -type DG 142 Ijlhcdwopcgz Dsvstg -year 1991 -blades 500 mm

Year of construction: 2023, Condition: as good as new (ex-display), cutting length (max.): 4,500 mm, saw blade diameter: 550 mm, Powerful double miter saw, ideal for mass cutting of plastic and aluminum profiles with 90° or 45°. Saw blade diameter 550 mm, 4,500 mm length, and 1-axis control E 590/1. Proven elumatec principle "sawing from below" for optimum accessibility and best possible utilization of the saw blade. - Minimized calculation effort thanks to outside dimension cut. - Pneumatic angular positioning 90° or 45". - Protective shields with automatic lowering above the sawing areas. - Top and bottom exhaust ports as standard. - Steel machine bed in column design. PC control E 590/1: - Industrial PC 1-axis control E590/1 for cutting length (X-axis). - Drive-independent absolute measuring system - Pneumatic blocking on position - Robust, low-wear direct drive of the mobile saw unit - Ergonomic arrangement of the control unit - Positioning accuracy +/-0.1 mm per meter - PC with Windows operating system - Language switching - Switchover mm /inch - 12# touch screen - Touch optimized user interface - Interface for NEDO measuring rod and scanner - USB interface for data exchange - Network connection for integration in company network - Software module cross-cut and overlength as standard Technical data: - Cutting length: 4,500 mm, minimum 400 mm - Tilting range: basic position 90°, tilting to 45° inwards (45°) - Maximum cutting range: see cutting diagram - Saw blade speed: 2.800 1/min - Power: 4 kW per motor at 400 V /50 Hz - Compressed air supply: 7 bar Itslhcem Nb Epjdwvog - Air consumption: 40 I per working cycle, with minimum lubrication 64 | Machine equipment: -Each 1 vertical clamping device per unit - Minimum quantity lubrication - Intermediate angle manual per aggregate, digital, stationary - Intermediate angle manual per aggregate, digital, mobile - Workpiece support mobile

Condition: excellent (used), Year of construction: 2018, operating hours: 2,200 h, Functionality: fully functional, machine/vehicle number: 1040099420, saw blade diameter: 420 mm, swivel angle A-axis (max.): 90 °, Equipment: type plate available, Saw fully operational. Ijlov A U Aajhcdwvotg Liquidation of the plant.

Condition: used, Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive Itolsttnt Iohcdwveg -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm -Weight: 9.5 kg

Condition: good (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work - after full service Itjlhcjr Ikvuodwvjg - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

Year of construction: 2025, Condition: new, machine/vehicle number: 073108206Z, We offer new hydropneumatical unit for machines elumatec DG 79, MGS 73 and SA 73. Never used. Original elumatec spare part. number: 073108206Z Ijlhcdwjwhdy Revetg We can send it to your address.

Condition: ready for operation (used), total height: 2,950 mm, total length: 11,400 mm, net weight: 4,900 kg, total depth: 3,350 mm, - 4-assig industrieel profielbewerkingscentrum - type SBZ 140 - Kan tot 5 zijden van een profiel bewerken - Bewerkingsmogelijkheden: boren, bewerken en draadtappen - Maximale bewerkingslengte met profielkopbewerking: 7480 mm - Maximale bewerkingslengte zonder profielkopbewerking: 7600 mm - De asgestuurde freeskop kan het profiel traploos bewerken op elke positie tussen 0° en 180° met alle beschikbare hulpmiddelen - 8 gereedschappen - 8 beweegbare klemmen - barcodelezer automatisch profielmeetsysteem 2 extra clips compleet materiaal afstandsbedieningsconsole voor SBZ 140 8x verstelbaar klemmateriaal automatische detectie van de klempositie automatische positionering van eindapparatuur microdoseersysteem (gereedschapssmering) veiligheidsafdekking veiligheidslicht centrale spaanafvoer 2x pneumatische nul-aanval apart klemsysteem (shuttle) - Hoek: +90° -90° Nieuwprijs was 189.000 euro Longitudinal travel X-axe: 7900 mm Crosstravel Y -axe: 850 mm Itelhsv Tamrecdwvsg Travel Z-axe (Height): 650 mm Power on spindle: 6 kW Admission in millingheadspindle (ISO): HSK-63 F Max speedrange: 24 000 rpm

Condition: good (used), Year of construction: 2009, in a good working condition, DG244/E555/1 , 6 meters Itolhstuvg Djcdwveg

Year of construction: 2006, Condition: ready for operation (used), Additional Equipment Additional functionalities with extraction unit and roller conveyor for improved operation Extraction unit DG 104 cpl Roller conveyor 3m Profile lifting bars This Elumatec DG104 sawing machine was manufactured in 2006. It features a double mitre saw with a 420mm diameter and an E 555/3 for 22.5º inside cuts. Additionally, it includes an extraction unit DG 104 cpl, a 3m roller conveyor, and profile lifting bars. A great opportunity to buy this Elumatec DG104 sawing machine. Contact us for more information. Itjlhcdwovthp Ieveg Application Types Sawing

Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 1049333220, cutting length (max.): 4,500 mm, saw blade diameter: 420 mm, double mitre saw 4,5 m D=420mm; E 355; 22,5° inside second-hand, year of manufacture: 2008 M-No.: 1049333220 - cutting length 4.500 mm - saw blade diameter 420 mm - Swivel range inwards, pneumatic 90° - 45° Itjlhouw T Stscdwvsg (up to 22.5° manual with digital display) - External dimension cutting for all cutting variants. This eliminates the need for length calculations necessary. Great advantage for special angles. Positioning control E355 - Drive-independent measuring system - Positioning accuracy +/- 0.1 mm per meter - Pneumatic locking in position - 5" matrix display with membrane keypad and handwheel for navigation in the operating menus - Memory for 999 data records Correction values for profiles - The record memory can store the record number, length dimension, profile number, angle position and number of pieces can be saved - Switch to 2nd language - Switchover mm/inch - RS 232 interface Technical data: Smallest cutting length at 90°: 335 mm Smallest cutting length at 45° inclination: 335 mm Voltage: 400V, 3 PH, 50 Hz Power output per motor: 4 kW Compressed air connection: 7 bar Air consumption per work cycle without spraying: 40 l with spraying: 64 l Accessories supplied: 2 carbide saw blades for aluminum and PVC (used): 420 mm diameter, 96 teeth Dosing spray device The following accessories are also included: 1x mobile workpiece support

Condition: used, Year of construction: 1989, window making machine S-IGL-0294 Make Elumatec Type: AF 222 Info: for milling of the transom bar for windows manufacture. Type: AF 222/02 End milling machine S-IGL-1626 Make Rottler & Rüdiger Type: n.a. Info: Georgian bars drilling machine L x W x H (2500 x 550 x 2000) S-IGL-1630 Make Werfeli Type: AFB 3E Info: 90/45 Saw for Georgian bars with storage cabinet: PULS SL 20 power supply PULS SL 5 power supply Selectron MMI 751 Selectron CPU 762 Selectron SMM 752 Selectron SDM 751 Siemens Sinamcics V20 S-IGL-1631 Make Werfeli Type: AFB 3E Info: Georgian bars milling machine L x W x H (2500 x 1200 x 1500) - Min length 150 mm, Max no limit - Production capacity: 50 - 80 pcs/hour - Toolchange profile: approx. 4 min. - Max. 4 profiles in serial can be milled in 1 step - Computer-controlled adju S-IGL-1651 Make Rottler & Rüdiger Type: ABH-97 Itjlhcdjv Icakjwveg Info: Manual winch radius bender for georgian bars/spacer. (Length x Width x Height) = 400 x 400 x 1350 S-IGL-1652 Make Rottler & Rüdiger Type: n.a. Info: Georgian bars drilling machine for filling the bars (Length x Depth x Height): 650 x 500 x 1100 S-IGL-1653 Make Rottler & Rüdiger Type: n.a. Info: Georgian bars dessicant filling machine (Length x Depth x Height): 650 x 1100 x 1200 7 IGU Production - Profile saws S-IGL-1627 Make Elumatec Type: PROFILE SAW WITH DIGITAL COUNTER Info: Elumatec AF 222 profile saw L x W x H (1150 x 800 x 1100)

Condition: repair required (used), Year of construction: 2020, operating hours: 600 h, Functionality: not functional, machine/vehicle number: 2450099188, saw blade diameter: 550 mm, total length: 1,900 mm, total width: 1,550 mm, total height: 2,100 mm, overall weight: 1,100 kg, compressed air connection: 7 bar, power: 4 kW (5.44 HP), Manual swivel range 22.5° left and right - with digital display E111 Pneumatic tilt range from 90° to 45° Saw blade diameter 550mm Saw blade speed max. 3000 rpm (50Hz), max. 3600 rpm (60Hz) Air consumption per cycle: without spraying 20 l, with spraying 32 l Stop and measuring system: AMS200 E570 7.5 m right The machine has a technical defect. A cost estimate for the repair is available (approx. €7,000 net). A detailed description of the fault and the repair contract can be provided upon request. Itelowkthiohcdwvjg An inspection can be scheduled upon request.

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, Elumatec VS750 welding machine technically efficient, ready to work - after full service VS 750 four-head welding machine EV 850 4-axis CNC cleaning machine transport/cooling station Itslhcdjwlqtrewvog rotary station Online connection automatic work cycle welding dimensions: 460 x 460 mm, 2600 x 3125 mm seal formatters Windows touchscreen operator panel 250 mm disc cutter 1 longitudinal feed axis with gripper30

Year of construction: 2009, Condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. machining length: 12,700 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm New PC with Windows 7 in 2020 minimum quantity spraying Tensioner detection and automatic displacement saw blade with 254 mm diameter from 2020 Pendulum operation through two light barrier areas Completely new spindle with 18 kN pull-in force Itelhcdwjvwl Ucjvog Angle head for machining from below Barcode scanner Loading is included in the price Weight: approx. 6,500 kg

Year of construction: 1993, Condition: excellent (used), Maximale Positionierlänge: 2600-3000 mm Itslhcdwjfibfnovjg Anschlag- und Mess-System mit E 255-Steuerung für die Schnittlängenpositionieru Zum Anbau an alle 1-Kopf-Sägen (Recht)

Year of construction: 2003, Condition: good (used), Roller conveyor Elumatec 3000mm Iolhcdwotpcrgevotg

Condition: excellent (used), Year of construction: 1991, Horizontal milling area after stop 230 x 90 mm Horizontal routing range according to copy template 230 x 90 mm Islhot Ua H Djcdwvstg Milling spindle speed 12,000 1/min. Clamping range of the profiles 180 x 130 mm Stroke 110 mm Voltage 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air connection 7 bar Air consumption per work cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg