Used Graule Zs 200 N for sale (17)

Condition: excellent (used), functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 295 mm, saw blade diameter: 520 mm, saw blade bore: 50 mm, rotational speed (max.): 2,800 rpm, overall weight: 300 kg, cutting depth: 200 mm, extraction nozzle diameter: 100 mm, Further technical data Cutting width: 90° 420 mm | swivelled at 45° 295 mm Cutting depth: tilted at 45/90 degrees 140 mm | 200 mm Special equipment 1019 Machine tiltable on both sides from the front via hand crank Dwsdpfxextpuue Akhoa 1002 Hydraulic feed brake 1049 HM circular saw blade for wood 520x4.0x50 mm / 60 teeth negative

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm Dwsdpji Dfidefx Akhoa The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Cut-off and miter saw, type: ZS 200 N - 5 KW motor with machine stand, Machine operated via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade arbor bore 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm Dedpfx Akjk H Ic Ushjwa The saw can be tilted to an acute angle of up to approx. 25 degrees on one side and can be tilted to the left up to 30 degrees. Tungsten carbide circular saw blade 520x4.0/2.8 x 50 mm, 60 teeth, negative bevel, for wood RLH-ST60, 6.0 m measuring length, mounting side: Left Length stop / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital measuring display, stop slide pneumatically releases, stop flap folds back, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connecting piece: overall length: 6.7 m Additional cost for digital electronic display unit type: FIAMA EP6 for 230 volt mains operation, with electronic on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60, 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connecting piece Location: In stock, 54634 Bitburg - immediately available - Image: similar. Machine is still in original packaging.

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Dwjdpfx Ajkwhmfjkhja Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm Cutting width: 420 mm at 90° 295 mm at 45° Cutting height: 200 mm at 90° 140 mm at 45° The saw can be tilted to an acute angle of approximately 25° on one side and tilted flat to the left up to 30°. Saw blade diameter: 520 mm x 50 mm Dust extraction port diameter: 100 mm Weight: 250 kg With the following optional equipment: - Carbide-tipped circular saw blade 520x4.0/2.8 x 50, 60 teeth, for wood - Machine can be tilted on both sides from the front using a hand crank Availability: short notice / 2022 Location: Solingen

Condition: used, Year of construction: 2008, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Dwedpfx Akoy S Rrbjhja Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Condition: used, Year of construction: 2000, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal miter range: 45° - 90° - 25° Vertical miter range: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Feed brake: yes Machine length: Machine width: Weight: 300 kg Dwedpfey S Rq Rsx Akhea

Condition: new, Year of construction: 2024, Cutting height at 90°: 200 mm Dwsdpfx Aksiuld Sjhsa Cutting length: 410 mm Horizontal mitre angle range: 45° - 90° - 25° Vertical mitre angle range: 60° - 90° - 30° Infeed roller table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Data: Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Cutting length: 420 mm at 90° position Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Machine packed on wooden planks Images show a customer’s machine. Available upon request also with 215 mm or 240 mm cutting height. Dedpfen R A Ewox Akhswa

Condition: new, 400 Volt Drehstrom-Bremsmotor 5,0 kWSägeblattdurchmesser 520 mm,Sägeblattaufnahme 50 mm,Schnitthöhe 200 mmSägeblatt auf 45° geneigt: Schnitthöhe 140 mm,Schnittlänge 420 mm,mit Maschinenständer und Handkurbel hintenzur Neigungseinstellung Dodpfovxr Thsx Akhewa

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Dedpjxaaxdsfx Akhewa Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Condition: new, Year of construction: 2026, machine/vehicle number: diverse, The professional solution for crosscuts, miter cuts, and bevel cuts The ZS 200 N is ideally suited for crosscuts, miter cuts, and bevel cuts. Materials such as wood, PVC, and aluminum profiles can be processed cleanly and precisely. The saw unit runs on a hardened guide arm and can be swiveled horizontally on both sides for miter cuts. The "N" stands for "Neigung" (inclination) and indicates that the saw unit can also be tilted vertically on the side – thus, bevel cuts can also be carried out easily. Fact Check ZS 200 N Crosscut and miter saw with a maximum cutting height of 200 mm Stable cast iron construction Precise ball bearing guide of the tool carriage on hardened and ground steel shafts Manual saw feed Fast miter adjustment up to 65° horizontally and up to 60° vertically Adjustable stops and lower saw blade guard Can be connected to a dust extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical Details: Motor 400 V / 5.0 kW Dwodpfxeh Nu Iue Akhoa Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal 45°-90°-25° Miter range vertical 60°-90°-30° Saw blade diameter 520 mm Weight 310 kg Scope of delivery: Miter and bevel saw ZS 200 N Machine stand Machine can be tilted on both sides from the front Hydraulic feed brake Circular saw blade HM Z 60 negative Operating tool and hand crank

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Djdpfsyh Nfuox Akhjwa Terms of delivery: ex warehouse

Condition: new, Year of construction: 2026, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range, horizontal: 45° - 90° - 25° Miter range, vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Dwodpfx Asiy Ry Ajkhsa Rotational speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Weight: 490 kg

Condition: used, Year of construction: 1998, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Dsdpfsy Hqdaex Akhowa Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction connection: 100 mm Weight: 490 kg

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 5 kW (6.80 HP), 5 kW, 7.5 hp Cutting height 200 mm Tiltable up to 60° to the left, up to 30° to the right via hand crank from the front Cutting height when tilted at 45°: 140 mm Cutting width: 420 mm, cutting width when swiveled at 45°: 290 mm Dwjdpfsdxw U Isx Akhsa Swiveling up to 60° to the left, up to 45° to the right Incl. saw blade for wood 6,000 mm heavy-duty outfeed roller table, mounting side on the left, stop slider with handwheel adjustable in length from the machine, pneumatically lockable, length digitally displayed, digital display in 230 V version 4,000 mm heavy-duty infeed roller table, mounting side on the right Machine can be tilted on both sides from the front using a hand crank and worm gear Various options available on request, e.g. larger cutting height (215 mm and 240 mm), pneumatic material clamping, and laser cutting indicator With appropriate modifications, also suitable for aluminum processing The roller tables can be supplied in longer or shorter versions upon request.

Condition: new, Year of construction: 2024, machine/vehicle number: MR005970, Perfect cutting 200mm high! In double miter and with a fixed zero point. When the machine is mitered, the saw blade continues to enter the material at the same point. Technical specifications: - Fixed zero point: Yes - Miter angle: 45-90-25 ° - Tiltable: Yes - Tilt angle: 60-90-30 ° - Maximum cutting length: 420 mm - Maximum cutting height: 200 mm - Maximum saw blade diameter: 520 mm Dsdpfx Asvzl Scjkhjwa - Weight: 310 kg - Saw blade speed: 2800 /min - Motor power: 7 hp - Serial number: 2024/95/5

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 200 mm, saw blade diameter: 520 mm, rotational speed (min.): 2,800 rpm, cutting length (max.): 420 mm, workpiece height (max.): 200 mm, feed length X-axis: 420 mm, length stop: 8,800 mm, pressure: 5 bar, space requirement length: 8,800 mm, space requirement width: 1,200 mm, Equipment: double-sided, Mobile saw base frame; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 - 5960 mm, with digital LED measurement display, measuring length including extension approx. 8800 mm, Saw base frame with 6 crank supports ensure safe standing when working. With electrical power distribution and 3-way socket 230 V Mobile saw base frame Beck ESF 1, saw ZS 200 mounted on base frame Dwsdpfsv Hhg Tex Akhsa