Used Arburg for sale (337)

Condition: used, Year of construction: 2007, Injection moulding machine Arburg 570C 2000 150/60 2 K, year of manufacture: 2007 Control: Selogica Clamping force [kN]: 2000 Pedpfx Aexuq Ufegqjrd Screw diameter: 25 / 12+15 Core pull: 1 Integrated hot runner zones: 15 Total power [kW]: 44.3 Opening stroke [mm]: 650 Selector unit: no Max. mould height [mm]: Min. mould height [mm]: 300 Specific injection pressure [bar]: 2500 Max. shot weight [g for PS]: 49 Tie bar spacing [mm x mm]: 570/570

Condition: used, Year of construction: 2007, Injection moulding machine Arburg 570C 2000 150/60 2 K, year of manufacture: 2007 Control: Selogica Clamping force [kN]: 2000 Screw diameter: 25 / 12+15 Core pull: 1 Integrated hot runner zones: 15 Total power [kW]: 44.3 Opening stroke [mm]: 650 Selector unit: no Max. mould height [mm]: Min. mould height [mm]: 300 Specific injection pressure [bar]: 2500 Max. shot weight [g for PS]: 49 Tie bar spacing [mm x mm]: 570/570 Psdpfjw D R S Eex Agqsrd

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Psdpfjxl Tz Asx Agqsrd

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 54109, if you have any questions about the machine, please contact us Pedpfexlhttjx Agqjrd

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Pedpfx Agetyyn Hsqerd

Condition: used, Year of construction: 2010, ARB669/SN240807 ,ARB820/SN260146 ,ARB798/SN202406 ,ARB777/SN182789V02 ,ARB777/SN182789V.03 ,ARB654/SN116761 , ARB805/SN228296A ,ARB809/SN216338V.02 ,ARB816/SN235404 ,ARB757/SN165210V.03 ,ARB790/SN188463 ,ARB814/SN224328V.02 , Podjuyf Dajpfx Agqord ARB657/SN116712 ,ARB818/SN257017V.02 , SELOGICA

Condition: used, Year of construction: 1995, Injection moulding machine Arburg 470C 1600-625 Year 1995 Year of manufacture: 1995 Control system: Dialogica Prsdpfx Agexuq U Soqjd Clamping force [kN]: 1600 Screw diameter: 35/45 Core pull: 1 Integrated hot runner zones: Total power KW: 35 Opening stroke mm: 650 Selector unit: Yes Max. mould height mm: Min. mould height mm: 250 Specific injection pressure [bar]: 2400 Max. shot weight [g for PS]: 240 Clear tie bar spacing mm x mm: 470/470

Condition: used, Year of construction: 2010, Injection molding machine Arburg Allrounder 470 H 1000-170, year 2010 Pjdpfx Agsw E Ev Usqsrd Clamping force: 1000 kN Screw diameter: 30 mm Screw length: 930 mm Shot weight: 77 g With Arburg robot The machine can be inspected under power at any time!

Condition: good (used), 1x used Arburg 370U 500-170 Podpfx Agjxl Tzcoqerd With Multilift Immediately available!

Condition: ready for operation (used), Year of construction: 2019, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 150 t This Arburg 520 H was manufactured in 2019. It features a clamping force of 150 tons, tiebar spacing of 520x520 mm, and a screw diameter of 35 mm. It includes a selecting unit and a single platen design. Consider the opportunity to buy this Arburg 520 H hydraulic injection moulding machine. Contact us for more information. Pjdpjxllnzofx Agqerd Application Types Injection Moulding

Year of construction: 1995, condition: ready for operation (used), Clamping force: 500kN, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, max. platen opening: 550mm, clamping platen dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 3700mm/1400mm/1900mm, weight: approx. 1750kg. An on-site inspection is possible. Prsdpfoxltvmex Agqed

Condition: used, Year of construction: 2012, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, load hours: 69,990 h, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Psdpfx Aexl Hi Tjgqord

Condition: used, Year of construction: 2010, Injection molding machine Arburg Allrounder 470 H 1000-170, year 2010 Clamping force: 1000 kN Screw diameter: 30 mm Screw length: 930 mm Psdpfx Aexurgcsgqord Shot weight: 77 g With Arburg robot The machine can be inspected under power at any time!

Condition: used, Year of construction: 2001, Vertical injection moulding machine Arburg 900T 800-150, year 2001 Year of manufacture: 2001 Control: Selogica Clamping force [kN]: 800 Screw diameter: 25 Core pull: No Integrated hotrunner zones: 6 Total power [kW]: 26 Opening stroke [mm]: 300 Selecting unit: - Max. mould height [mm]: - Min. mould height [mm]: 250 Psdpfxow D R T Nj Agqsrd Specific injection pressure [bar]: 2500 Max. shot weight [g for PS]: 45 Free space between tie bars [mm x mm]

Condition: good (used), Year of construction: 2009, 520 S 1600 - 290/290 Complete thermoplastic cylinder, 35 mm, highly wear-resistant Complete thermoplastic cylinder, 35 mm, highly wear-resistant, for 2nd injection unit Drive unit with 30 kW motor and 65 l/min pump delivery rate Accumulator module with 64 l storage capacity (max. 230 bar) Selogica direct control system Technology level: accumulator drive Multi-component processing 2nd injection unit 290 vertical Open nozzle 25 mm Open nozzle 35 mm Open nozzle 35 mm for 2nd injection unit Submerged nozzle tip for open nozzle Electrical and hydraulic actuation of NVD in mold for 1st injection unit Electrical and hydraulic actuation of NVD in mold for 2nd injection unit Heating band for open nozzle Heating band for open nozzle for 2nd injection unit Heating/cooling jacket for open nozzle Variable clamping plate set, Ø 125 mm Minimum installation height expanded to 450 mm Blow-out unit 1 with pressure reducer Selection unit incl. connection Ejector pressure P/Q controlled (prerequisite: T2) Core pull 1, parallel movement P/Q controlled, programmable Core pull 2, parallel movement P/Q controlled, programmable Prsdpfx Agoxl Ty Esqjd Electric core pull control 1 (prerequisite: VE 436/00) Top guard open, increased to safety dimension Start-up inspection hydraulic accumulator Continuous oil cooling and filtration Increased cooling capacity Parting plane device on short supports for 2nd injection unit Nozzle contact force controlled, programmable for 1st injection unit Nozzle contact force controlled, programmable for 2nd injection unit Conveyor belt connection electric via socket combination Emergency stop interface 1 to 24-pole interface, 2-channel Emergency stop interface 2 to 24-pole interface, 2-channel Temperature release up to 450°C and reinforced cylinder heating Basic equipment for control of electric axes Host computer interface ARBURG 8 programmable digital inputs/outputs on terminal strip Interface for mold temperature control unit 20 mA Connection cable for REGLOPLAS temperature control unit Serial USB printer interface External PC keyboard with USB interface Additional floppy disk drive via USB interface CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Holder for PC keyboard with USB connection Injection with mold closed ("flying injection") 3 measurement circuits for mold temperature 15 electric heating control circuits for mold heating Device interface Start-up parameters Post-pressure switching channel 3 on fixed mold plate Interface for colouring unit LSR unit interface via 6-pin Harting connector Interface for colouring unit for 2nd injection unit Interface for vacuum control Vacuum control with vent function Vacuum monitoring via analog signal Vacuum unit 40 m³/h Kit for connecting mold to vacuum valve Interface for flow monitoring for cold runner system Energy monitoring and power consumption display 2 cooling water circuits laid to fixed mold plate 2 cooling water circuits laid to moving mold plate 4 manual cooling circuits Basic equipment for 2nd cooling water distributor (manual) 7 manual cooling circuits for 2nd water distributor Machine-related cooling circuits controlled Equipment package: advanced monitoring Equipment package: advanced movements Equipment package: production control Equipment package: optimization / operator aids Equipment package: quality assurance Equipment package: documentation aXw Control ScrewPilot for 1st injection unit aXw Control ScrewPilot for 2nd injection u

Condition: ready for operation (used), Year of construction: 2014, operating hours: 18,612 h, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 150 t This Arburg 520 H 1500-400 was manufactured in 2014. It features a closing force of 150 tons and a screw diameter of 35mm, suitable for precision hydraulic injection moulding. Operating on 400V, it has a total connected load of 89 kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Psdpoxllkvjfx Agqerd

Condition: excellent (used), Year of construction: 2007, operating hours: 83,564 h, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, mold height (min.): 250 mm, Arburg 520A-1600-400 (228)hybrid injection molding machine Number: 228 Availability: in stock Year of production: 2007 Producer: Arburg Injection moldingmachine condition:used Screw diameter [mm]: 40 Psdpjxlgd Dsfx Agqerd Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: 1600 Column spacing [mm]: 520 x 520 Plate size [mm]: 795 x 795 Control type: Selogica Tongue: English, German Installed power [kW]: 21.2 Working hours [h]: 83564 Weight [kg]: 9000 Dimensions [mm]: 5500 x 2000 Feed hopper: NO Robot socket: Yes Air valve: 3x

Condition: excellent (used), Year of construction: 2008, operating hours: 56,000 h, For sale: Arburg 570-2000-800 injection moulding machine, year 2008. In very good technical and visual condition, operates very quietly, no oil leaks. Selogic control system. Bimetallic injection unit, 45 mm diameter. 1 x air, 2 x hydraulic core, robot interface. The machine is sold without material or colour additive feeders. Prsdpfxeukirbe Agqsd

Condition: used, Year of construction: 1996, Injection moulding machine Arburg 420C 1000-250, years 1996, 1994, and 1995 3 identical Arburg 420C injection moulding machines available! Year of manufacture: 1996 Control system: Dialogica Clamping force [kN]: 1000 Screw diameter [mm]: 35 Core pull: 1 Integrated hot runner zones: - Total power [kW]: 24.2 Opening stroke [mm]: 500 Selector unit: yes Max. mould height [mm]: - Min. mould height [mm]: 250 Specific injection pressure [bar]: 2350 Max. shot weight [g for PS]: 89 Tie bar spacing [mm x mm]: 420 x 420 Year of manufacture: 1995 Control system: Dialogica Clamping force [kN]: 1000 Screw diameter [mm]: 30/25 Podpfjxuq Ulsx Agqjrd Core pull: 1 Integrated hot runner zones: - Total power [kW]: 24.2 Opening stroke [mm]: 500 Selector unit: yes Max. mould height [mm]: - Min. mould height [mm]: 250 Specific injection pressure [bar]: 2350 Max. shot weight [g for PS]: 89 Tie bar spacing [mm x mm]: 420 x 420 Year of manufacture: 1994 Control system: Dialogica Clamping force [kN]: 1000 Screw diameter [mm]: 30 Core pull: 1 Integrated hot runner zones: 6 Total power [kW]: 24.2 Opening stroke [mm]: 500 Selector unit: yes Max. mould height [mm]: - Min. mould height [mm]: 250 Specific injection pressure [bar]: 1750 Max. shot weight [g for PS]: 121 Tie bar spacing [mm x mm]: 420 x 420

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Arburg Allrounder 630A Multi Component Plastics Injection Moulding Cell (2021) with Inspection & SAR Automation with SAR workpiece full tray infeed and empty tray return Epson LS10-B803S take off robot Kist + Escherish cleaning station with Wanderes air brush Kuka Cybertech 2 series robot with 2x tool stands & controller Arburg Allrounder 630A 2500-800/400 L2, 2500kN clamp force multi-component plastics injection moulding machine (2021) including 800 horizontal injection unit and 400 vertical injection units Helios Jetboxx WINsystem Turbo 50-75 stand alone dryer and trolley Predexlgxujpfx Agqjd 2x Epson G10-451S placing robots with controllers Workpiece placing stand Rotary inspection table with camera, laser & Keyence scanner stations Kist + Escherich cleaning station and Wanderes air brush SAR workpiece full tray outfeed and empty tray return ESTA Dustomat 16M mobile dust extractor (2022)

Condition: ready for operation (used), Year of construction: 2010, Injection Unit Screw diameter 25 mm Clamping Unit Podpfx Ajxlln Iogqsrd Clamping force 80 t This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2001, Vertical injection moulding machine Arburg 900T 800-150, year 2001 Year of manufacture: 2001 Control: Selogica Pedpfx Aoxuq Uxogqerd Clamping force [kN]: 800 Screw diameter: 25 Core pull: No Integrated hotrunner zones: 6 Total power [kW]: 26 Opening stroke [mm]: 300 Selecting unit: - Max. mould height [mm]: - Min. mould height [mm]: 250 Specific injection pressure [bar]: 2500 Max. shot weight [g for PS]: 45 Free space between tie bars [mm x mm]

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, Injection Unit Prsdjxizguopfx Agqod Screw diameter 25 mm Clamping Unit Clamping force 100t This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 2005, Injection moulding machine Arburg 420A 1000-400, year 2005 Year of manufacture: 2005 Control system: Selogica Clamping force [kN]: 100 Screw diameter: 30/35 mm Pedjxuq T Ispfx Agqord Core pull: 1 Integrated hot runner zones: 9 Total power kW: 60 Opening stroke mm: 350 Selector unit: Yes Max. installation height mm: 500 Min. installation height mm: 250 Specific injection pressure [bar]: 2500 Max. shot weight [g for PS]: 141 Clear tie bar distance mm x mm: 420/420

Condition: ready for operation (used), Year of construction: 2011, operating hours: 68,463 h, Injection Unit Screw diameter 35 mm Pedjxizf Djpfx Agqord Clamping Unit Clamping force 150 This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, it's designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding