Used Atlas Copco Ga 132 for sale (748)

Year of construction: 2006, Condition: ready for operation (used), Two identical Atlas Copco compressors including external heat recovery are available. Drive power: 132kW, max. operating pressure: 13bar, volume flow: 17m³/min, water temperature at 90kW: 90°C/70°C, machine dimensions X/Y/Z: approx. 2800mm/1900mm/2000mm, weight: approx. 3200kg, operating hours 1/2: 64290h/64765h. Including bypass flap for air cooling and electrical main switch. Documentation available. On-site inspection is possible. Expected to be available from mid-April 2025. Pelhcdov N Iz Ajw Dspr

Condition: excellent (used), Year of construction: 2000, Atlas Copco GA 1 kw compressor Year 2000 Number of hours in operation: 6 Number of hours under load: 22,097 Pslou Thw Rohcdw Dopr

Condition: excellent (used), Year of construction: 2022, overall weight: 2,924 kg, pressure (max.): 9.8 bar, AIR COMPRESSOR i have 2 of them Model: GA132VSD+FF Max. working pressure: 9.8 Bar Total rated power: 144.4 kW Rotational shaft speed: 3700 r/min Year of manufacture: 2022 Gross mass: 2924 Kg Price: 37000 euro EXW for 1 Ppelhcdsv Axxfew Dor

Condition: excellent (used), Year of construction: 2008, overall weight: 3,500 kg, volume flow: 20 m³/h, operating pressure: 10 bar, input voltage: 400 V, ATLAS COPCO GA 132 screw compressor 135 kW engine Capacity 20 m3/min Pressure 10 bar Pslhjtxq H Docdw Dopr Year of production 2008

Condition: ready for operation (used), Year of construction: 2003, Atlas Copco compressor with integrated dryer. about 60,000 h but overhauled about 2 years ago and always serviced by Atlas Copco. perfectly working. about 20,000 liters per minute of flow Pjlhcjvwbazodw Djpr

Condition: excellent (used), Year of construction: 2017, operating hours: 37,679 h, Functionality: fully functional, Atlas Copco GA132 screw compressor 132 kW at 7.5 bar and 25.40 m3/min. Built in 2017 with approximately 37,000 hours. Ppjlhcdewfmxwow Dor

Condition: excellent (used), Year of construction: 2022, operating hours: 5,352 h, machine/vehicle number: APF261502, overall weight: 2,924 kg, volume flow: 1,380 m³/h, pressure (max.): 9.8 bar, Equipment: refrigerant dryer, type plate available, ATLAS COPCO GA132VSDFF compressor no. APF261502 PROD.: ATLAS COPCO TYPE: GA132VSD FF S/N: APF261502 YEAR: 2022 CAPACITY (kW): 144.1 OUTPUT (m3/min): 5-23 CIS (bar): 9.8 HRS (DOC/GENERAL): 5352 INVERTER: yes BUILT-IN DRYER: yes R410a 5.8kg EXCHANGER: no COOLED (AIR/WATER): air ON THE TANK: no Pslhov Imzrjcdw Dopr DOCUMENTS: no CONNECTION: 2 NEW/USED: USED S015632

Condition: excellent (used), Year of construction: 2018, operating hours: 34,846 h, Functionality: fully functional, Premium screw compressor Atlas Copco GA132VSD Built in 2018 with only 34,846 operating hours. Pslhceuuyv Sedw Dopr 8.5 bar with 27.80 m3/min. 132 kW

Year of construction: 1986, Condition: used, Serial number: ARP86xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20125 Specifications: Model year: 1986 Type: GA 355 Max pressure: 7.5 bar Power: 55 kW Ready for delivery. Ppslhcewdvblsdw Der Kw: 55

Year of construction: 2000, Condition: ready for operation (used), Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible. Ppslhcdowfg Hhjw Dsr

Condition: refurbished (used), Year of construction: 2001, operating hours: 137,140 h, Functionality: fully functional, machine/vehicle number: AII374165, overall weight: 995 kg, total length: 1,000 mm, total width: 1,800 mm, total height: 1,900 mm, power: 30 kW (40.79 HP), volume flow: 5.34 m³/h, pressure (max.): 7.5 bar, Equipment: type plate available, Sandblasting system consisting of Atlas Copco GA 30 FF screw compressor and Kipphardt pressure blasting pot The Atlas Copco screw compressor for sale has been completely overhauled and regularly serviced. The maintenance reports are available up to and including 24.04.2023. The compressor is a state-of-the-art industrial compressed air solution that focuses on efficiency and reliability. With its proven screw principle, it offers continuous air flow for a wide range of applications. The blast pot is functional. Nameplate attached to the photos. V: 200 L TS: + 50 / - 10 °C PS: + 10 / - X Bar Pelhcowb Aidsdw Djpr Year: 2002 Note: The sale is made exclusively to traders within the meaning of § 14 BGB. Errors and changes excepted.

Condition: good (used), Year of construction: 2002, operating hours: 197 h, SCREW COMPRESSOR GA 18 + 7.5P Serial number: 272265 Operating hours: 197 Operating hours The integration of Atlas Copco GA compressors directly into the production area ensures a reliable flow of compressed air directly to the place of use. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. GA compressors are designed to offer maximum efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally fully piped and wired compressor, single-stage oil-injected compression, air-cooled, sound-insulated. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Compressor control system Elektronikon II Technical data Manufacturer: Atlas Copco Type: GA 18+ 7,5P Rotary screw compressor Max. Operating pressure: 7.5 bar Free air flow: 54.3 I/s Volume flow: 3.51m³/min Nominal shaft power kW 18.5 Shaft speed: 3000 r/min Oil/water separator: Öwamat Reference conditions Intake pressure: 1 bar Intake temperature: 20 °C Relative humidity: 0 % Usable volume flow at the outlet of the compact system in accordance with ISO 1217-3, C at operating overpressure 7.5 bar 58.5 Is: 3.51m³/min Nominal motor power: 18 kw Nominal motor speed: 2940 min Ppjlhewbti Iecdw Der Shaft power requirement of the motor at maximum operating overpressure: 21.1 kW Shaft power requirement when idling: 4.9 kW Compressed air temperature after the aftercooler: 25 degrees Cooling air volume: 1.15 m³ Oil filling quantity: 7.6 l Residual oil content:

Condition: ready for operation (used), Year of construction: 2001, Fully functional Polel N T Iqshcdw Djpr The loading include in the price

Condition: new, Year of construction: 2025, new compressor with warranty (we are official dealers). discounted price. list price euro 25441. possibility of combining Atlas Copco dryer (available). latest technological model. main features: max bar 10 power 15kw-20hp air flow liters7min 3000 for detailed technical sheet do not hesitate to contact me. Pelhcdswcm Hiow Dopr

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, We offer Atlas Copco compressors TYPE GA 55 Pressure 10 bar Motor 55 kW Year 2000 Compressor with documentation We also have other compressors from Atlas Copco, Kaeser, and Mahle Ppjlhcswa Iz Aodw Dsr

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco GA 18 - 10 FF screw compressor with boiler Ppjlhcdwsu Rptyo Der Fully automatic, internally fully piped and wired compact system, single-stage oil-injected compression, air-cooled, sound-insulated, built-in refrigerant dryer (WorkPlace Air System™). Technical data Reference conditions: Suction pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volume flow at the outlet of the compact system at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Rated motor power 18 kW Nominal motor speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after the dryer 23 °C Cooling air volume 0.23 m³/s Oil filling quantity 12.2 l Residual oil content under reference conditions

Condition: excellent (used), Year of construction: 2009, overall weight: 444 kg, volume flow: 1.7 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 11 VSD screw compressor Variable speed (inverter) On a 500 l pressure tank 11 kw engine Efficiency 1.70 m3/min Pressure 10 bar Polhcdev Sm Umew Dopr Year of production 2009 Compressor after service, filter and oil replacement.

Condition: good (used), Year of construction: 2002, SCREW COMPRESSOR GA 18 + 7.5P Serial number: 272262 Operating hours: Only 1 operating hour The integration of Atlas Copco GA compressors directly into the production area ensures a reliable flow of compressed air directly to the place of use. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. GA compressors are designed to offer maximum efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally fully piped and wired compressor, single-stage oil-injected compression, air-cooled, sound-insulated. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Pjlhcdwswbr Uie Dspr Compressor control system Elektronikon II Technical data Manufacturer: Atlas Copco Type: GA 18+ 7,5P Rotary screw compressor Max. Operating pressure: 7.5 bar Free air flow: 54.3 I/s Volume flow: 3.51m³/min Nominal shaft power kW 18.5 Shaft speed: 3000 r/min Oil/water separator: Öwamat Reference conditions Intake pressure: 1 bar Intake temperature: 20 °C Relative humidity: 0 % Usable volume flow at the outlet of the compact system in accordance with ISO 1217-3, C at operating overpressure 7.5 bar 58.5 Is: 3.51m³/min Nominal motor power: 18 kw Nominal motor speed: 2940 min Shaft power requirement of the motor at maximum operating overpressure: 21.1 kW Shaft power requirement when idling: 4.9 kW Compressed air temperature after the aftercooler: 25 degrees Cooling air volume: 1.15 m³ Oil filling quantity: 7.6 l Residual oil content:

Condition: good (used), Year of construction: 2008, operating hours: 3,000 h, overall weight: 3,500 kg, pressure (max.): 7.5 bar, Equipment: type plate available, PROD. ATLAS COPCO TYPE - GA110 S/N - APF134315 YEAR - 2008 POWER (kW) - 121 PUMP. - (m3/min) CIS (bar) - 7.5 Pelhcdspvktksw Depr

Condition: new, Year of construction: 2025, Atlas Copco compressor (we are official dealers) new year 2025 with warranty. possibility of combining dryer (available). list price euro 49551 mod ga 37 vod with inverter main features: Pelhcdwowaz D Re Dopr bar max 10 power 3kw/45hp flow rate liters/min 6900

Condition: used, Year of construction: 1984, operating hours: 46,320 h, Field of application: Construction Empty weight: 2.360 kg Make of engine: Electric Capacity: 23 m³/m Compressor type: Screw compressors Pjlhcjq Eaifedw Djpr Transport dimensions (LxWxH): 3x1x2 Working pressure: 8 bar Please contact Sales Department for more information

Year of construction: 1988, Condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Ppjlhcdehpx U Ajw Dor

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, Atlas Copco GA22 SP screw compressor – 22 kW | 7.5 bar | 60 l/s I will sell an industrial screw compressor of the renowned Atlas Copco brand, model GA22 SP, manufactured in 1996. The device is ideal for applications requiring a reliable source of compressed air in various industrial sectors. Pslhov Dukgscdw Depr Technical data: Model: GA22 SP Motor power: 22 kW Maximum operating pressure: 7.5 bar Flow capacity (FAD): 60 l/s (216 m³/h) Shaft speed: 3000 rpm Power supply voltage: 400 V / 50 Hz Noise level: 74 dB(A) Dimensions (L x W x H): 770 x 850 x 1200 mm Weight: 405 kg Condition and use: The compressor is in good technical condition, regularly serviced and ready to work. It was used in controlled industrial conditions, which ensures its reliability and efficiency.

Condition: good (used), Year of construction: 2002, SCREW COMPRESSOR GA 18 + 7,5P Item is available 3x, in the following options 1x serial number: 272261 Operating hours: 1492 Price: 5035€ 1x serial number: 272265 Operating hours: 197 Price: 5875€ 1x serial number: 272262 Operating hours: 1 Price: 6295€ The integration of Atlas Copco GA compressors directly into the production area ensures a reliable flow of compressed air directly to the place of use. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. GA compressors are designed to offer maximum efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally fully piped and wired compressor, single-stage oil-injected compression, air-cooled, sound-insulated. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Elektronikon II compressor control system Technical data Manufacturer: Atlas Copco Type: GA 18+ 7,5P Screw compressor Max. Operating pressure: 7.5 bar Free air output: 54.3 I/s Volume flow: 3.51m³/min Nominal shaft power kW 18.5 Shaft speed: 3000 r/min Oil-water separator: Öwamat Reference conditions Suction pressure: 1 bar Intake temperature: 20 °C Relative humidity: 0 % Pjlheuyg S Eecdw Depr Usable volume flow at the outlet of the compact system according to ISO 1217-3, C at operating overpressure 7.5 bar 58.5 Is: 3.51 m³/min Nominal motor power: 18 kw Nominal motor speed: 2940 min Shaft power requirement of the motor at maximum operating overpressure: 21.1 kW Shaft power requirement at idle: 4.9 kW Compressed air temperature after the aftercooler: 25 degrees Cooling air volume: 1.15 m³ Oil filling quantity: 7.6 l Residual oil content:

Condition: used, Year of construction: 1990, operating hours: 28,502 h, Field of application: Construction Pelhcjq Eahdjdw Dspr Empty weight: 4.200 kg Make of engine: Electric Capacity: 24 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 3x1x2 Working pressure: 7.5 bar Please contact Sales Department for more information