Used Atlas Copco Ga 18 for sale (7)

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Gbedpox Ih D Tefx Aa Ieg

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min Gbsdpfxsu Rptye Aa Isg according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: excellent (used), Year of construction: 2019, operating hours: 18,124 h, functionality: fully functional, Screw compressor Atlas Copco GA18VSD+. 18.5 kW with 13 bar and 3.70 m³/min. Integrated frequency converter. Gsdpfxex Tdbxe Aa Isbg

Year of construction: 2003, condition: ready for operation (used), 7.5 bar 18 kW Gbedpfx Aoxu H Ubea Ieg weight 500 kg

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h Gbedpfx Aohabk Dsa Iog -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: used, Year of construction: 1995, operating hours: 35,000 h, functionality: fully functional, Atlas Copco GA18, used, located in Hildesheim, test run possible Gbjdpfxjw Sllze Aa Ieg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: API838388, overall weight: 480 kg, volume flow: 225 m³/h, pressure (max.): 12.75 bar, Equipment: type plate available, We offer: screw compressor, Atlas Copco GA18VSDFF PLUS compressor Technical data: Power: 18.5 kW Efficiency - 3.75 m3/min. Maximum pressure: 12.75 bar, year of manufacture: 2018 INVERTER: yes BUILT-IN DEHUMIDIFIER: yes Gbodpfxov Drmre Aa Ieg NEW/USED USED