Used Binder Oven for sale (57)

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum circuit breaker: 16A Frequency: 50/60Hz Electrical connected load: 3.4kW Temperature range: +5°C above ambient temperature up to 300°C Pjdexzulnopfx Agqord Spatial temperature deviation at 150°C: ± 3.8K Temporal temperature deviation at 150°C: ± 0.7K Heating-up time to 150°C: 29min Recovery time after 30 s door opening at 150°C: 6min Air exchange rate at 150°C: 18x/h Interior volume: 400l Maximum load per shelf: 35kg Maximum total load: 90kg Energy consumption at 150°C: 1,200Wh/h Maximum number of shelves: 10 External dimensions: Width: 1,235mm Height: 1,025mm Depth: 765mm Internal dimensions: Width: 1,000mm Height: 800mm Depth: 510mm

Condition: good (used), Binder drying oven FD 240, up to 300°C Predpfx Agjw Hbxhoqed

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum pre-fuse: 16A Frequency: 50/60Hz Electrical connected load: 4.5kW Temperature range: +12°C above ambient temperature up to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heat-up time to 150 °C: 25 minutes Recovery time after 30 s door opening at 150 °C: 6 minutes Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per shelf: 45 kg Maximum total load: 315 kg Prodpfxsxzukko Agqed Energy consumption at 150 °C: 800 Wh/h Max. number of shelves: 16 External dimensions: Width: 1,235 mm Height: 1,025 mm Depth: 765 mm Internal dimensions: Width: 1,000 mm Height: 800 mm Depth: 510 mm

Condition: good (used), Binder Heating Cabinet / Oven / Drying Cabinet ED 240 up to 300°C Pedpfx Aew Hbw Rsgqjrd

Condition: good (used), Binder BD 720 Heating oven drying oven Prsdpfx Ajtub N Asgqjd up to 99°C Oven

Condition: used, functionality: fully functional, With this offer, you are purchasing a used accessory, the ‘Ricoh RB5020 ring binder’. Podexzqhfspfx Agqord Item for sale: 1 x Ricoh RB5020 suitable for the following models: Ricoh Pro C7200 series Ricoh Pro 8200 series Ricoh Pro C9200 series Please check in advance whether this accessory is suitable for your machine. Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test binding can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: like new (used), Binder MKF 115 E5 Chamber has only 485 operating hours One-year warranty on spare parts Description MKF 115 Binder MKF climate chambers with temperature control (-40°C to 180°C) and humidity Binder MKF series environmental simulation chambers are ideal for all cold and heat testing carried out according to recognized temperature and climate testing standards compliant with DIN and IEC norms. The high level of user comfort and comprehensive standard equipment offer clear advantages in daily operation. Key features: - Temperature range: -40 °C to 180 °C - Humidity range: 10% to 98% RH - Built-in 20 L water reservoir (models 115, 240, 720) - 4 volt-free relay connectors - 1 stainless steel wire shelf - Preheating chamber technology e™ - Intuitive touchscreen controller with segment programming and real-time software Prodpfx Aow U Sw Nogqjd - Built-in data logger, measurement values in an open format readable via USB - Programmable anti-condensation protection for samples - Heated viewing window with internal LED lighting - Humidity control with capacitive humidity sensor and steam humidification - BINDER Multi Management Software APT-COM™ Basic Edition - Diagnostic system with visual and audible alarms - Access port with silicone plug (model 56, 115, 240: 50 mm, left side) - 2 access ports with silicone plugs (model 720: 80 mm, left and right) - Independent, adjustable class 2 (DIN 12880) temperature safety device with optical alarm - 4 castors, two with brakes - Computer interface: Ethernet - 230 V socket on the right side panel (models 115, 240, 720) - Ramp function setting - Built-in chart recorder - Real-time clock - Door heating - Alarm message in case of missing water in the fresh water tank (models 115, 240, 720) - Hose leakage protection including supply and drain hoses up to 1 m - Stainless steel interior - Halogen-free refrigerant R-452A - Cooling provided by compressor unit One-year warranty on spare parts.

Condition: used, This listing is for the Binder KT53 Incubator The unit is in full working condition and is ready for immediate release The Binder KT 53 is a compact, energy-efficient cooling incubator engineered for precise temperature control in laboratory environments. It leverages Peltier thermoelectric technology for eco-friendly, low-vibration cooling—ideal for sensitive biological or chemical samples. Key Specifications Temperature Range: 4 °C to 100 °C Capacity: 53 litres Cooling Technology: Electric cooling via Peltier module Heating Technology: e™ preheating chamber Temperature Fluctuation: ±0.1 °C at 37 °C Air Circulation: Adjustable fan speed Controller: Supports time-segment and real-time programming Display: LCD monitor Data Interface: USB and Ethernet ports for data logging and remote access Safety Features: Class 3.1 independent temperature safety device (DIN 12880) with visual and audible alarms Construction: Stainless steel interior with a tempered safety glass outer door Shelving: Comes with 2 stainless steel racks; supports up to 5 Internal Dimensions (H x W x D): 400 x 400 x 334 mm External Dimensions (H x W x D): 630 x 660 x 630 mm Weight: 65 kg Power Consumption: Approx. 75 Wh/h at 37 °C Advantages of Peltier Technology Silent, vibration-free operation Podpoxv Ay Njfx Agqord Environmentally sustainable (no refrigerants) Compact and energy-efficient Ideal for sensitive sample environments

Condition: used, Binder Type: MKF 720 E1 / E1.1 Air-cooled The MKF dynamic climate chamber is a specially developed environmental simulation chamber for industrial materials testing and environmental simulation. Its unprecedented performance far exceeds the capabilities of a conventional heating chamber. It fulfills all the tasks required for materials testing, as well as aging and stress tests. TECHNICAL DATA: Housing dimensions: Width: 1615 mm Height: 2005 mm Depth: 1230 mm Internal dimensions: Width: 1200 mm Height: 1020 mm Depth: 600 mm Main technical features of the MKF 720 E1 / E1.1 Temperature range: -40 °C to +180 °C Humidity range: 10% RH Up to 98% RH Interior volume: 734 liters Weight: approx. 590 kg Refrigerant: R-404A Power supply: 400 V 3N~ ±10%, 50 Hz Rated power: 8.0 kW Rated current: 12 A Maximum heat compensation: 6500 W Humidity control: Steam humidification with capacitive sensor Pedowb D Uujpfx Agqsrd Controller: Intuitive touchscreen with real-time and time-period programming Data logger: Integrated, with USB readout function Safety functions: Visual and audible alarm, Class 2 adjustable temperature limiter (DIN 12880) Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Fastbind Elite XT Perfect binder Machine in very good visual and technical condition. Possibility of gluing hard and soft covers and blocks. The machine is equipped with milling. Ideal for photo books. Original product – Made in Finland Hard cover strip included as well as soft cover set. Predpfx Aexx At Ijgqed Description: Technical capabilities of the machine: cycles / hour up to 450 Productivity: books / hour up to 180 Min. / max. cover thickness 0.1–50 mm Max. length of glued spine 455 mm Max. cover thickness 400 g / m² Voltage 220–240 V Machine dimensions (width / length / height) 1050 x 520 x 570 mm Weight 70 kg

Condition: used, Resonance vibrating screen Screen surface: 5,500 x 1,300 mm Predpfxetpgdys Agqod with base frame and electric drive

Condition: used, functionality: fully functional, With this offer, you are purchasing a used brochure production system, the ‘C.P. Bourg BBF2005 Perfect Binder’. Item for sale: 1 x Bourg BBF2005 suitable for various Xerox model families: Prsdpfxsxzqa Uj Agqsd iGen ColorPress Nuvera DocuTech Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: like new (used), Year of construction: 2025, Binder MKF 115 E5 Chamber equipped with air dryer One-year warranty on spare parts MKF 115 Description Binder MKF climate chambers with temperature (-40°C to 180°C) and humidity control Binder MKF series environmental simulation chambers are ideal for all cold and heat tests based on recognized temperature and climate test standards compliant with DIN and IEC standards. High user comfort and comprehensive standard equipment offer clear advantages in daily operation. Key features: - Temperature range: -40°C to 180°C - Humidity range: 10% to 98% relative humidity - Built-in 20 L water tank (models 115, 240, 720) - 4 potential-free relay outputs - 1 stainless steel wire shelf - e™ preheating chamber technology - Intuitive controller with touchscreen, time-segment programming, and real-time operation software - Internal data logger, measurement values in open format, downloadable via USB - Programmable anti-condensation protection for samples - Heated viewing window with internal LED lighting - Humidity control via capacitive humidity sensor and steam humidification - BINDER Multi Management Software APT-COM™ Basic Edition - Diagnostic system with optical and acoustic alarms - Access port with silicone plug (models 56, 115, 240: 50 mm, left side) - 2 access ports with silicone plugs (model 720: 80 mm, left and right sides) - Independent, adjustable class 2 temperature safety device (DIN 12880) with optical alarm - 4 casters, two lockable - PC connection interface: Ethernet Predexyy Ncspfx Agqed - 230 V socket on right side panel (models 115, 240, 720) - Ramp function capability - Built-in line recorder - Real-time clock - Door heating - Alarm notification in case of no water in the fresh water tank (models 115, 240, 720) - Safety device in case of hose leakage, covers water supply and drain lines up to 1 m height - Stainless steel interior - Halogen-free refrigerant R-452A - Cooling provided by compressor unit

Condition: used, tank capacity: 2,245 l, GENERAL Equipment: Crane lugs Design: Vertical Notes: 1 internal dip tube Internal diameter: 1,190 mm Total height: 2,800 mm Prjdpfxsxqdr No Agqod Base type: Feet Location: Bremen Nameplate: Volume: 2,245 litres Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 1,890 mm Last intended use: Pharmaceutical VESSEL Number of feet: 3 pcs FEATURES Manhole / Dome: In the top head (DN 500) Outlet (alternative inlet): 32 mm Note: Metallic discolouration inside MATERIAL SPECIFICATION Legs material: Stainless steel

Condition: excellent (used), Binder Type: Binder CB 210 CO² / 9140-0013 Technical data Temperature range 7 °C above room temperature to 60 °C MB1 controller for temperature and CO2 concentration Interior volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Pjdpfxjrp Enbo Agqsrd We will be happy to answer any further questions you may have on the phone.

Condition: used, Technical details: Length: 1000 mm width: 300 mm voltage: 110 V clamping surface area: 1000 x 300 mm current: 2,9 A weight of the machine approx.: 204 kg dimensions L x W x H: 1,2 x 0,3 x plus Gleichrichter m Magnetic plate with rectifier 4pcs induction loops with width 60mm and distance 75mm * Predpfju N Dy Ssx Agqed

Year of construction: 2002, condition: good (used), doubledeck screen box: 1.000 x 5.000 mm squared meshes on both screen decks E-motor 4 kW steel-construction and outlet chutes Prjdpfxelxzkko Agqed

Condition: excellent (used), Year of construction: 1995, heating capacity: 200 kW (271.92 HP), We offer a heating system from the renowned Austrian company BINDER. Boiler with a heating output of 200 kW TYPE RRK 150 Pedpfx Agjxalfisqjrd Stove for biomass, bark, wood chips, and sawdust. Complete set with pumps and valves

Condition: like new (used), Year of construction: 2025, Device like new from 2025, ex demo Manufacturer: Binder Model: KBF 115 Year of manufacture: 2025 Type: Constant climate chamber Temperature range: 0–70°C Humidity range: 10–80% Humidity control: humidity sensor + steam humidification Power: 2 kW Capacity: 115 liters Prjdoxyy Hhopfx Agqjd Ethernet connection Internal dimensions: 60 × 35 × 45 cm External dimensions: 70 × 103 × 90 cm

Condition: used, This listing is for the Binder BF115 Incubator The unit is in full working condition and is ready for immediate use BINDER BF 115 – e Series Forced Convection Incubator Predexhfz Tepfx Agqod The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Internal Dimensions 550 × 550 × 380 mm (W×H×D) External Dimensions 710 × 725 × 605 mm (W×H×D) Power Supply 230 V, 0.4 kW, 6.3 A fuse (also available in 120 V) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Energy Consumption ~60 Wh/h @ 37 °C; ~235 Wh/h @ 100 °C Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: excellent (used), Here we offer a Binder incubator. Important features Model BD 115 | Standard incubator with natural convection Technical data BD 115 External dimensions: Prsdeqzx Nnepfx Agqed Net width 835 mm Gross height (including feet / castors) 705 mm Net depth 645 mm Gross depth (including door handle and exhaust air pipe) 750 mm Rear wall clearance (minimum) 100 mm Wall clearance to the side (minimum) 160 mm Exhaust air pipe, outer diameter 52 mm Doors Number of doors 1 Internal dimensions: Width 600 mm Height 480 mm Depth 400 mm Interior volume 115 liters Steam compartment Volume 142 liters Shelves Number of shelves 0 Number of shelves, max. 5 Maximum load per shelf 20 kg Permissible total load 50 kg Weight Weight (empty) 61 kg Temperature data Temperature range, 5°C above room temperature to 100°C Temperature deviation over time at 37°C ± 0.1 K at 50°C ± 0.1 K Spatial temperature deviation at 37°C ± 0.4 K at 50°C ± 0.8 K Heating time to 37°C 70 minutes to 50°C 90 minutes Recovery time after 30 sec door open at 37°C 10 minutes at 50°C 12 minutes Electrical data: BD115-230V IP 20 Nominal voltage (+/-10%) at 50 Hz mains frequency 230 V Rated voltage (+/-10%) at 60 Hz Mains frequency 230 V Current type 1N~ Rated power 0.20 kW Type: BD 115 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Technical details: Length: 800 mm width: 315 mm voltage: 110 V clamping surface area: 795 x 315 mm current: 1 A weight of the machine approx.: 130 kg dimensions L x W x H: 0,85 x 0,35 x 0,09 m Magnetic clamping plate Magnetic strips 18x, width 20mm, distance 40mm * Prsdju N D Naepfx Agqod

Condition: like new (used), Binder CB 260 E7 as good as new. PRODUCT DESCRIPTION The powerful and versatile CB CO₂ incubator is suitable for cell tests in substance research and medical research. Thanks to its extensive range of options and accessories, the BINDER incubator can easily handle complex culture tasks or individually defined growth conditions with low oxygen concentrations. KEY FEATURES Optimised two-chamber humidification system with anti-fogging protection Prodpfx Agev Up Dvsqed Proven anti-contamination concept with 180°C heat sterilisation Hot-air sterilised CO₂ sensor with single-source infrared technology Seamless stainless steel inner cup with beads as slide-in supports Fanless interior with Venturi CO₂ gas mixing nozzle Intuitively operated touch controller Internal measurement data logging system, via USB port, readout in a publicly available format Fault diagnostic system with visual and acoustic alarm Connections: Ethernet, USB, potential-free alarm contact CO₂ Fail Safe system for pH safety of cell cultures

Condition: like new (used), Device as new ex demo. Podpjwfh T Asfx Agqsrd Description The Binder CO2 incubator type CB210 is ideal for sensitive incubation applications and ensures optimal cell growth. This CO2 incubator can be used, among others, in tissue bioengineering, in vitro fertilization (IVF) clinics and teaching hospitals. The Binder CB210 also contains six compartments. The amount of CO2 is measured using a built-in infrared sensor. The outer door is made of stainless steel. In addition, this CO2 incubator is equipped with six shelves and forced convection. Technical data Voltage: 230 V, 50/60 Hz Current: 6.6 A Power: 1.5 kW CO2 control range: 0 – 20% Temperature range: approx. 7 °C above ambient temperature up to 60 °C External dimensions (W) x (D) x (H): 74 x 79 x 106 cm Internal dimensions (W) x (D) x (H): 58 x 44 x 75 cm

Condition: like new (used), Year of construction: 2025, Binder MKT 240 E5 Climate Chamber Chamber from 2025 with only 66 operating hours. One-year warranty on spare parts PRODUCT DESCRIPTION Temperature range from -70°C to 180°C and realistic simulation capabilities make the MKT series from BINDER truly unique in its class. At the same time, this chamber meets the highest standards for precision and performance in cyclic temperature testing. KEY FEATURES Temperature range: -70°C to 180°C 4 potential-free relay connections Preheating chamber technology e™ Programmable anti-condensation protection for samples Heated inspection window with internal LED lighting BINDER Multi Management Software APT-COM™ Basic Edition Diagnostic system with visual and acoustic alarm Intuitive controller with touchscreen, featuring segmental and real-time programming Internal data logger, measurement values available in an open format readable via USB Access port with 50 mm silicone plug, located on the left side Prodpfx Aew U Rv Regqod Independent, adjustable class 2 (DIN 12880) temperature safety device with visual alarm 4 casters, two with brakes Computer connection interface: Ethernet Ramp function adjustable Integrated chart recorder Real-time clock Door heating Stainless steel wire shelf Stainless steel interior Halogen-free refrigerants R-452A and R-23 Cooling provided by cascade compressor refrigeration unit