Used Kolbus Book Binding Machine for sale (131)

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Automatic case maker board feeder soft spine feeder cover feeder viscosity control small size device round corner device Itolhccswd Nwgoqqjg only 5,5 million cases made mechanical Speed: 40 Cycles/Min Max. Size: 390 x 670 mm Min. Size: 140 x 205 mm

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 1050, IN ADDITION TO THE MACHINE, THERE ARE: KOLBUS ZU 840 SIGNATURE COLLECTOR, 4 STREAMFEEDER MOD. OMG LOADERS COMPLETE WITH CLAMPS, 1 MULLER MARTINI LOADER, BOOK BLOCK FEEDER WITH LEFT-HAND LOADING, RAISING DEVICE, AMBAFLEX TOWER MOD. SV-400-1800-HS. THE MACHINE IS WORKING AND CAN BE CHECKED AT OUR OFFICE IN MALALBERGO (BO), BY APPOINTMENT. Itjlhev Rp Nqjccqqsg

Condition: ready for operation (used), Consisting of: full tools, books and accessories available Technical Data Working range -base machine with electric equipment -in feed unit, MR -book bloc in feed with splitter -gluing unit -pre-heater and heated rounding unit -paternoster with press on unit -belt delivery 370mm x 270mm x 80mm max 125mm x 100mm x 6mm min 14 – 36 cycles per minute Itslhccsq Aufqsqqsg

Condition: excellent (used), Year of construction: 2008, Ref:10870 . 2008 Sigloch Book Preparation & Kolbus BF512 Casing-in Line. Short make-ready, compact, casing-in line for books with hard, flexible or plastic covers. Kolbus Compact BF512 Casing-in element with 'Co-Pilot' computerised set-up and memory Comprising; Sigloch Twin end sheet pasting unit Sigloch BBL-30/3 Back Gluing and Lining; Sigloch NG60/2 double Nipping Press Conveyor and Cooling / Drying System to Kolbus HD130 three knife trimmer to; Kolbus Compact 512 Casing-in element Comprising; 'Co-Pilot' computerised set-up and memory with touch-screen colour monitors HB 530 Spine warming conveyor ‘AR' rounding and backing element with various size rounding irons to; ‘HL' backlining unit with hot gluing, paper lining and head & tail banding ‘EMP' casing-in element with DBA case bending unit, heated former for cases, various formers for size changing, Robatech hot-melt spine joint gluing. 'FE' pressing and building-in machine. Delivery belt to:- Sigloch BSD-60 book stacker Including accessories, tools & manuals. Ielet Dpdkehccqqstg Specification: Book block format, Max: 385 x 315 x 80 mm Min : 105 x 105 x 6 mm Open case size, Max: 660 x 385 mm Min: 210 x 105 mm Mechanical speed : 10 - 30 cycles/min.

Condition: ready for operation (used), Year of construction: 1986, Functionality: fully functional, The Kolbus DA-36 cover making machine is designed for the production of book covers. Main technical characteristics of KOLBUS DA 36: maximum mechanical speed, c/min - 36 Islhccqov Tk Imjqotg format of the book cover, mm: maximum - 405×560 minimum - 110×155 width of the spine of the book block, mm: minimum - 8 maximum - 80 thickness of cardboard pieces, mm: minimum - 1 maximum - 4 thickness of flexible backing material, mm: minimum - 0.3 maximum - 0.5 thickness of rigid backing material, mm: minimum - 1 maximum - 3 Location: Ukraine. Year of manufacture: 1986

Condition: used, Casing-In / Bucheinhängemaschine - Buchformpresse / Book Forming Press Kolbus EMP - FE Year 1966 Block size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Case size min. 125 x 210mm / max. 370 x 62 mm Speed up to 36 cycles per minute Itjlhcjvuaqyjcqqeg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1996, Condition: used, Hard cover book line Consisting of: Kolbus BF 525 - FE 603 - DS 391 Year: 1996 - 2000 - 2002 Hard cover book line Kolbus BF 525 + FE 603 Year: 1996 - 2002 Ijlovw Al Ejhccqqotg Description: - Automatic setting - Co-Pilot with touchscreen - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 603 Year: 2000 Description: - Pressing station - Right hand infeed - Integrated hydraulic - Straight delivery Book stacker Kolbus DS 391 Year: 2002 - Turning device - Delivery in reverse direction - Straight delivery Book production line: Compact 2000 SC Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 125 mm Book block format (max): 270 x 375 x 80 mm Book block format (min): 100 x 125 x 4 mm Max. mechanical speed: 50 cycles/min -: - Book forming and pressing machine: FE 603 Product size (max): 315 x 385 x 90 mm Product size (min): 70 x 100 x 6 mm Max. mechanical speed: Up to 62 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Year of construction: 2009, Built in 2009 Equipment - Co-Pilot with touchscreen Itelhsu T Ndnoccqqjg - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): 4 - 18 - Knife pre-setting device - Sets of knives: 2 Condition: cleaned in good working condition

Condition: excellent (used), Year of construction: 2009, Perfect Binding Line, consisting of: Gathering Machine ZU 841.A - basic frame with 21 gathering stations - 19 standard feeders - 1 handfeeding station (covering 2 housing stations) - device for electrostatic fixation of three advertising medias - integrated jogging station - Aircenter - reject unit AS 841 to the right - transfer channel as connecting unit to the binder Perfectbinder KM 473 - 26 clamps - handfeeding - main milling station - equalized milling station - notching station - micro-notching station - brushing station with roller brush - 2 Hotmelt spine gluing units - 1 Hotmelt side gluing unit - 3 premelters LH 375 - IR heating at curve - stream cover feeder SAL 411.A - scoring station for 4 scores - 2 pressing stations - gripper carriage delivery - laydown device Transport and Drying Line, incl. Ambaflex drying tower, incl. emergency delivery Three Knife Trimmer HD 153.P - copilot - right hand infeed - counter stacker - silicon spraying device - standard cutting cassettes 7 - 18 additionally available: Kolbus book block feeder with delivery belt Kolbus card gluer KK 841 PUR spine gluing unit with Nordson smelting unit Best for PUR cover 600L Kolbus destacker AE 360 Kolbus blocking unit VB 120 pallettizer Kolbus PL 770 or Kolbus PL 771 Ielhevg Ad Toccqqjtg

Condition: used, KOLBUS Book Saddle for straight spine Configuration: - flat bar feeder - shaper left - shaper right Technical specifications: KOLBUS no.: KOLBUS no.: 53-6-752 KOLBUS no.: 12557452 (flat bar feeder) KOLBUS no.: 12557085 (shaper left) Itjlhjv E Evcoccqqjg KOLBUS no.: 12557086 (shaper right) MULLER MARTINI no.: R255.7452.5 (flat bar feeder) MULLER MARTINI no.: R255.7085.5 (shaper left) MULLER MARTINI no.: R255.7086.5 (shaper right) compatible with: KOLBUS book production line BF 511, BF 512, BF 513, BF 524, BF 525, BF 526, BF 527 Spare Part Number: Quantity: 1

Condition: used, Head & Tail Banding Machine with Gauzing Station Kolbus HL Year 1970 Format / Size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Leistung / Speed up to 36 cycles/min. Bestehend aus / Consist of: 1) Anleimstation / Gluing Station 2) Kapitalband- und Hinterklebestation / Head and tail banding station Itjlhccov Ay Arsqqog 3) Andruckstation / Pressure station Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2014, Ref:10700 . 2014 Kolbus NM 100 Grooving machine. Angled grooving machine for paste board, providing a one-piece board with routed grooves to allow for the hinged joint of hard book covers, slip cases, calendar stands & luxury presentation boxes. Features: • Sturdy, versatile box components thanks to smooth grooving cuts, through to a minimal last board/paper layer. • Special grooving knives can be set to cut 90° – 130° angles. • Grooving knives are adjustable from the outside of the machine. • Knife positioning device with digital indicator • Precise positioning up to 1/10 mm • Large format machine • 100% angled boxes, sharp edges and smooth groove surface Specification: Size range (width x height), Min:140 x 100 mm | Max: 1,050 x 525 mm Double magazine for parallel processing of two board blanks 1. blank Max.: 455 x 455 mm Max: 580 x 330 mm 2. blank dependent on the width of the 1st blank, max. < 250 mm in amount max.: 910 mm Islhccot Dpv Tsqqetg • Suitable for cardboard or slightly curved cardboard with punched corners • Swivel slides in alignment operation for precise alignment of the cardboards. The swivel pushers are particularly recommended for smaller alignment edges, for example landscape format, large differences in the aspect ratio or corners that have been punched out beforehand. Board thickness: Min. 1 mm | Max. 4 mm Number of grooves per cycle: 1 – 8 grooves in running direction Distance single groove: Min. 1 mm Distance double groove to double groove: 40mm Mechanical speed: 40 up to Max. 65 components/min (100 products/min) Net production is subject to sizes, materials etc.

Condition: good (used), Case maker Ielhcjuauivecqqstg Kolbus Model DA36 Minimum size 110 x 155 mm Maximum block size 405 x 560 mm Spine size 8 -80 mm Speed Machine can run 14-15 cases a minute in it´s current condition Formats that we do mostly on the machine are A4, A5, B5, B6 The machine can work with paper and PU leather materials. The machine is in operation and can be tested until September 2024, after that we install a new machine so the test will not be possible Location: Serbia

Condition: good (used), Year of construction: 2007, Year 2007 Iolhccou Tuiieqqjtg - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): 4 - 18 - Knife pre-setting device - Sets of knives: 2 Condition: cleaned in good working condition

Condition: excellent (used), Year of construction: 1998, Perfect Binding Line with endsheet feeder consisting of: Gathering Machine ZU 804 - 20 stations - handfeeding for 2 persons - Aircenter - transfer to the binder Perfectbinder KM 472.A - 27 clamps - endsheet feeder with cold glue - handfeeding - infeed incl. coupling with ZU - main milling station - equalized milling station - notching station - micro-notching station - 2 stations for spine gluing units (two-shot) - station for side gluing unit - cold glue spine gluing unit - cold glue side gluing unit - Hotmelt spine gluing unit - premelter LH 370 - Hotmelt side gluing unit - PUR spine gluing unit Ieljvw Nwbohccqqotg - Nordson premelter XNO 920 (year 2003) - gauzing station - IR heating at curve - stream cover feeder - scoring station - 2 pressing stations - Himmel HF dryer - laydown device Transport and Drying Line incl. emergency delivery as well as a Three Knife Trimmer are available on request.

Condition: used, Year of construction: 1972, machine/vehicle number: 275, Eckeneinziehmaschine Kolbus EP- Corner Pulling Machine Kolbus EPYear 1972 - Serial-No. 275 Size max: 405 mm Accessories: 2-corner-pulling-heads Online-Video-Inspection by Skype-Video Ielhccoh Axdlsqqstg We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 294203, Eckenrundstossmaschine - Corner Rounding Machine Kolbus EHSerial-No. 294203 Rundes Messer Nr. 11 / Round Knife No. 11 Stapelhöhe max. 55mm Hub 65mm Handhebel / Table model Manual Operation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Islhccjh Axdteqqetg

Condition: used, Buchformpresse / Book Forming Press Kolbus FE Online-Video-Inspection by Skype-Video Itelhccqstzc Iqeqjg We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2019, Condition: used, Case maker KOLBUS DA 270 Bookjet Edition Year 2019 For fully automatic production of book cases, files, display cards, calendar backs, game boards or luxury packaging. Description: - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation proces - Counter stacker delivery with following roller conveyor - Cloth cylinder with grippers and exchangeable plates for rubber pa (5 pieces 500 mm wide and 5 pieces 720 mm wide, incl. 10 pieces of rubber pads) - Centre strip pressing device (head / tail) - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults Itelhcor Aba Socqqsg - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D additional equipment - Without centre strip roll device - Board centre strip cutting device (cross centre strip) For processing digital print products of varying centre-strip. - Device for cutting rigid centre board strips to width, with possible width variation from cycle to h data coupling via AFS 702.W with input and output code reader for digital print finishing - Processing of Hotmelt with premelter LH 375.B Technical specifications: Open cover size: Max. 670 x 390 mm Min. 205 x 140 mm Joint width: 4 - 15 mm Spine width: 14 - 120 mm Turn in width closed: 8 - 15 mm Cloth: Width: 223 - 708 mm Height: 130 - 428 mm Boards: Thickness: 1 - 4 mm Width: 95 - 328 mm Height: 140 - 390 mm Board centre strip: Thickness: 1 - 4 mm Width: 6 - 90 mm Mechanical speed: up to 65 cycles/min

Condition: reconditioned (used), Year of construction: 2016, Equipment: 4 in one shovel, Casemaker "BookJet Edition" - processing Hotmelt - board centre strip magazine - board centre strip cutting device Ielhccov Adazjqqjtg

Condition: used, Year of construction: 2019, KOLBUS Casemaker DA 270 BOOKJET EDITION year 2019 For fully automatic production of book cases, files, display cards, calendar backs, game boards or luxury packaging. Configuration: - Copilot system with touchscreen - board magazine for manual loading - cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - miss cloth control during the separation process - counter stacker delivery with following roller conveyor - cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - centre strip pressing device (head/tail) - pressing roller device for crease-free connection of the - cover material with boards and spine strip - device for producing padded cases - automatic case counter - programmable automatic settings, motorized adjustments, - indication of production faults - single case request for control purposes done from the operating side - servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device - board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip - device for cutting rigid centre board strips to width, with possible width variatio from cycle to cycle - with data coupling via AFS 702.W with input and output code reader for digital print finishing - processing of Hotmelt with premelter LH 375.B Technical specifications: mechanical speed: up to 65 cycles/min open cover size max.: 670 x 390 mm open cover size min.: 205 x 140 mm joint width: 4 - 15 mm spine width: 14 - 120 mm turn in width closed: 8 - 15 mm cloth width: 223 - 708 mm cloth height: 130 - 428 mm board thickness: 1 - 4 mm board width: 95 - 328 mm board height: 140 - 390 mm board centre strip thickness: 1 - 4 mm board centre strip width: 6 - 90 mm Option: KOLBUS Pneumatic Corner Cutter ECK 100 year 2011 For cutting the corners of covering materials, card-board and paper. Standard equipment: Ijlher Abbpeccqqetg - with tool cabinet

Year of construction: 1998, Condition: ready for operation (used), Built in 1998 Size max 510 x 305 mm min 250 x 100 mm Book block thickness max 5-80 mm Speed max 20.000 c/h Itslhccjd Hp I Noqqsg

Condition: used, Year of construction: 2002, Equipment: clamp, 1 x Perfect Binder Brand: Kolbus Model: KM 410.C Islhccjwlkr Usqqetg Year: 2002 Consisting of: - Perfect Binder KM 410.C - 24 Staples - Collator ZU 840.B - Robatech Pre-melter XRT 951 and 950 / ICS 160 - Conveyor and Cooling Belt AK-6365-02 - Three-Knife Trimmer HD 151.P - Müller Martini Compensating Stacker

Condition: used, KOLBUS Clamp 12461590 Technical specifications: KOLBUS no.: 12461590 Ielerc S Dfshccqqotg compatible with: KOLBUS perfect binder KM 600.C, KM 610.C important note: the photos show a sample. The purchased item can vary. Condition Details: Reconditioned Spare Part Number: 12461590 Quantity: 1

Condition: good (used), Year of construction: 1974, Functionality: fully functional, machine/vehicle number: DA247, type of input current: three-phase, Technical Data: 18 to 36 books per minute. Motor rating 2.2 Kw. Size range min. 65x100x6mm. max. 325x265x75. Overall length 2750 mm. Overall width 2100 mm. Overall height 1600 mm. Weight approx. 4000 kg. Itjlhjwk Nwyjccqqsg