Used Battenfeld Extruder for sale (145)

Condition: excellent (used), Year of construction: 1990, BATTENFELD BEX 1-120-30B single-screw extruder Application for PE, PP Cscfrfrnik Year of manufacture 1990 Screw diameter 120 mm Total output approx. 600 kg/h The extruder and drive were overhauled in 2021 The main switch was replaced Three-phase motor as good as new Condition: the extruder is ready for use and in very good condition Last application PE pipes LxWxH 5,700m x 1,900m x 2,200m Weight: approx. 7.000 kg A regenerated Ø121mm barrier screw and a Ø121mm cylinder, as well as a Ø120mm new grooved feed bushing are optionally available. The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Condition: ready for operation (used), Year of construction: 1992, Single Screw Extruder, used Manufacturer: Battenfeld Type: Uni-Ex-1-90-30-B Year of construction: 1992 Screw design: grooved infeed zone Screw diameter: 90 mm Screw length: 30 x D Screw speed: max. 164 1/min. Drive motor: DC-Motor Motor power: 160 kW Barrel heating/cooling zones: 4/4 (air cooling with fan) Adapter heating zones: 1 Tooling heating zones: approx. 10 Operation: Extruder Battenfeld BMC touch Output rate: max. approx. 500 kg/h for PE100 - pipe Accessories: without material hopper Special accessories: melt temperature- and melt pressure sensors Extrusion height: 1160 mm Cgvbfhonxw Dimensions: 5500 x 1500 x 2100 mm (LxWxH) Weight: approx. 5000 kg Remark: The machine is still in production until 06.12.2024. The machine will be dismantled on 09.12.2024 and should then be loaded immediately on the same day.

Condition: like new (used), Year of construction: 2023, operating hours: 5,930 h, Functionality: fully functional, Extruder combination C2Sdcix9 - Pilot plant machine - solEx 45-40: 59h - solEx 75-40: 30h

Year of construction: 2007, Condition: good (used), Functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Czwpvifd

Year of construction: 1996, operating hours: 81,500 h, Condition: refurbished (used), Functionality: fully functional, Twin parallel screw extruder Ø107mm 25LD - Type : BEX 2 107 25 V3 - Year : 1996 Fzjdpjg - New order retrofitted by Battenfeld-Cincinnati - Screws and sleeves in good condition - Capacity: up to 400kg/h depending of material & tooling - Very good overview condition

Condition: ready for operation (used), 120mm Battenfeld Single Screw Extruder With 250hp Dc Motor. Fan Cooled Barrel. 32d Plugged Vent. Gneuss RSF75 Continuous S/Changer With Panel. PP PET Gxse3Cp2Al

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, screw diameter: 38 mm, Selling due to a closure our WPC/PVC profile extruder manufactured by Cincinnati-Battenfeld Austria. YOM 2011, model Fiberex K38, twin-screw, conical, counter-rotating, screw diam 38mm, motor 15 kW (AC), screws and barrel TC coated, horizontal material dosing feeder, double degassing filter. The extruder is designed as a co-extruder for WPC profile production on a adjustable column, but could be used as stan-alone as well on a own basement, has own control cabinet and remote control. Processing unit can be re-set for other product and/or type of plastic. Low running hrs. Cggbrahauy The extruder is in good working condition, could be demonstrated on-site by appointment. Many optional peripheral equipment upon request.

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Ci7A8Bwbhd Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) Mygats > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 1992, Condition: excellent (used), Battenfeld gearboxes for single screw extruders : BEX 1- 90-30B , i = 6,6 , 160 kW, Bzwxpjpktq

Condition: ready for operation (used), Year of construction: 2001, operating hours: 84,131 h, Control Unit Model 9000C Injection Unit Screw diameter 120 mm Shot weight 6,175 (PS), 4,816 (PP) Stroke volume 6782 CMM Injection pressure 1765 bar Clamping Unit Clamping force 13000 kn Opening stroke 1650 mm Distance between bars Horizontal - 1600 mm; Vertical - 1200 mm Mould height min 500 mm Mould height max 1200 mm Ejector stroke 600 mm Additional Equipment Handling equipment (excluding conveyor belts) weight clamping side 82500 kg / weight Injection side 18500 kg This Battenfeld HM 13000/12000 was manufactured in 2001. A robust injection moulding machine featuring a Unilog 9000C control system, clamping force of 13,000 kN, and a screw diameter of 120 mm. It supports a maximum opening travel of 1650 mm and a total installed power of 257.9 kW. Ideal for large-scale production, the Battenfeld HM 13000/12000 machine we have for sale represents a significant opportunity. Contact us for more information. Dqohfj Application Types Injection Moulding

Condition: good (used), Year of construction: 1996, operating hours: 40,794 h, Functionality: fully functional, Complete Battenfeld Cincinnati line, supplemented by a Sica A10-63 bundling unit. Coyndrbmyw

Condition: excellent (used), Year of construction: 2010, BATTENFELD TM 110/525 B6S (25.347 h)(S&P 3745) Year: 2010 Operating hours: 25.347 h Screw: 40 mm Injection pressure: 2100 bar Injection volume: 251 ccm Dqnp0X Clamping force: 110 t Tiebare distance: 470 x 420 mm Mouldheight: 275 mm Daylight max.: 775 mm Size: 3800 x 1400 x 2000 mm Weight: 4400 kg Price: € 17.500,00 contact: Mr. Ralf Schulz

Condition: good (used), Functionality: fully functional, UNILOG 4000 Test unit with screen removed from running machine Cqlk7Tdu2S

Condition: good (used), Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, valve amplifier, valve control -Manufacturer: Bachmann, valve control from Battenfeld injection molding machine -Type: PVV100 B 2537/00 -Quantity: 2x control card available Cs2B0Bi32Q -Price per piece -Dimensions: 130/50/H30 mm -Weight: 0.3 kg/pc.

Condition: excellent (used), Year of construction: 2004, operating hours: 59,220 h, Functionality: fully functional, clamping force: 3 kN, screw diameter: 65 mm, injection pressure: 1.777 bar, injection weight: 981 g, total height: 2,400 mm, Machine type: Battenfeld TM 3500 / 1900 injection molding machine Year of manufacture: 2004 Operating hours: 59.220 clamping unit Clamping force: 3,500 kN Dimensions of the clamping plate (h x v): 1,010 mm x 1,010 mm Clearance between the columns (h x v): 710 mm x 710 mm Minimum/maximum mold height: 300 - 710 mm Maximum opening width: 1,380 mm Injection unit Screw diameter: 65 mm Injection volume: 1,078 cm³ Injection size: 981 g Br0Pgnhx3Bo Injection pressure: 1,777 bar Dimensions and weight Net weight with control cabinet: 15.2 t Dimensions (L x W x H): 7.60 x 1.80 x 2.40 m

Condition: ready for operation (used), Year of construction: 2004, Battenfeld injection molding machine TM 5500/2800 Year of manufacture - 2004 Tool closing system : Closing force- 5,500 kN Tool board dimensions: 1280 x 1280 mm Clearance between columns: 900 x 900 mm Tool height: 450...800 mm Opening path: 900 mm Injection unit: Auger diameter - 85 mm Injection weight - 1936 g Injection volume - 2128 ccm Specific injection pressure- 1354 bar Bimvv0O37Au

Condition: excellent (used), Year of construction: 2009, Battenfeld HM 180 /525H/60V Closing force: 180t Year of manufacture: 2009 Injection weight: 175/20,8g Injection unit .../525/....60 Screw diameter: 35/18mm Specific injection pressure: 2743/2593 bar Injection volume: 193/22.9 ccm Injection weight: 175/20,8 g L / D ratio of the slug: 22/20 Closing system of tool 180/... E2Pnohi Closing force: 180 t Clearance between columns: 570 x 520 mm Tool height: 305 mm Ejector stroke: 200 mm Tooling: Rotary table with servo drive 3 x hydraulic core

Condition: excellent (used), Year of construction: 2011, BATTENFELD TM 110/525 (20.265 h)(S&P 3747) Dqnpvd Year: 2011 Operating hours: 20.265 h Snail: 40mm Spray pressure: 2100 bar Displacement volume: 251 cm³ Closing force: 110 t Hole spacing: 470 x 420 mm Mold installation height min.: 275 mm Plate spacing max.: 775 mm Dimensions: 4000 x 1400 x 2000 mm Weight: 4400kg Price: €17,900.00 Contact: Mr. Ralf Schulz

Condition: excellent (used), Battenfeld Unilog control 9000 B Bz9Ldcfr

Condition: excellent (used), Year of construction: 2012, Wittmann Battenfeld MicroPower 5/7.5 / Electric machine / Operating hours: approx. 300 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 14 mm Injection weight: approx. 2.5 g Injection pressure: 2500 bar Dosing volume: 3 ccm Clamping unit: Clamping force: 5 t Size of the clamping plates: 240x400 mm Ejector: electric Cnjmc9Ku9W Control system: UNILOG B6 - touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Spraying unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter - energy saving Built-in vacuum pump from the Becker brand Automatic height adjustment of the injection unit Dimensions: Weight: 1370 kg Length/width/height: 2.09x0.97x2.50 m Drive: Heat output: 2.45 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, clamping force: 2 kN, screw diameter: 55 mm, injection pressure: 2.041 bar, injection weight: 594 g, TECHNICAL DETAILS Machine type: Injection molding machine Battenfeld HM 2700 / 1330 Control system: Unilog B4 Clamping system Clamping force: 2,700 kN Size of the mold platens: 1,030 mm x 1,020 mm Distance between the columns: 710 mm x 630 mm Opening stroke of the mold: 800 mm Minimum mold height: 350 mm Max. Daylight: 1,150 mm Stroke of the hydraulic ejector: 200 mm Ejector force forwards/backwards: 59 kN Injection system Screw diameter: 55 mm L/D ratio: 22 Injection pressure: 2,041 bar Displacement: 653 ccm Bfrrznil Injection weight, PS: 594 g Injection stroke: 400 mm Screw speed: 318 1/min Maximum plasticizing rate: 59.3 g/s Nozzle pressure: 100 kN Electrical and hydraulic equipment Installed heating capacity: 18.2 kW Adjustable drum heating zones: 1 + 4 Oil tank capacity: 650 l Dimensions and weight Total weight of the machine: 12,000 kg Dimensions (L x W x H): 5.6 x 1.8 x 2.2 m

Year of construction: 2005, Condition: excellent (used), Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control system: UNILOG B4 Clamping force: 13000 kN Year of manufacture: 2005 Technical data closing side: Drive type: full hydraulic Closing type: full hydraulic Type of construction: four-bar Closing force: 13000 kN beam dimension h: 1600 mm tie bar dimension v: 1250 mm platen size h: 2220 mm plate size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm distance between plates max: 3850 mm opening stroke: 2850 mm ejector stroke: 350 mm Ejector force: 165 kN centering moving platen D: 315 mm centering fixed platen D: 315 mm Technical data injection side: Screw diameter: 120 mm Stroke volume: 5655 ccm injection pressure: 1630 bar Screw length: 22 l/d Plasticizing flow: 144 g/s PS The technical data of the 2nd injection unit are as follows: Injection unit II 7700 Screw diameter 100 mm, specific injection pressure 1960 bar, calculated stroke volume 3927 ccm, screw L/D 22, plasticizing flow 122 g/sec Dimensions & Weight: Ywudg Machine dimensions L x W x H: ca. 12,5 m x 3 m x 2,5 m Total weight: 113500KG Equipment: On-screen text German CEE socket 32A Core pull hydraulic 1x Core pull hydraulic 2 x Air valve 1x Machine with water battery Machine without material hopper Leveling elements Interface EUROMAP 63 Interface EUROMAP 67 Interface for Airmould Schuko socket 16A Two-component injection molding machine Machine is offered without peripherals.

Condition: excellent (used), Year of construction: 2007, Battenfeld Plus 350/75 Year of construction: 2007 Injection unit: Screw diameter: 25 mm Injection weight: 44.6 g Injection pressure: 1575 bar Dosing volume: 49 ccm Clamping unit : Cnjkhl9P9C Clamping force: 35 t Distance between tie bars: 270 mm Size of the clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B2 Additional equipment: Air valve x 1 Dimensions: Weight: 1000 kg Length/width/height: 2.24x0.88x1.70 m Drive: Pump/motor: 7.5 kW Heating output: 2.76 kW Total output: 10.26 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Battenfeld HM 45/60S / Machine in very good technical condition Year of construction: 2009 Injection unit: Screw diameter: 18 mm Injection weight: 20.8 g Injection pressure: 2593 bar Dosing volume: 22.9 ccm Clamping unit : Clamping force: 45 t Distance between tie bars: 320x270 mm Size of the clamping plates: 480x460 mm Ejector: hydraulic Clamping unit: hydraulic Dqmpw7 Control system: UNILOG B6 - touch control panel Additional equipment: Machine in very good technical condition Operating hours: approx. 37,000 h Euromap Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit - precise injection Dimensions: Weight: 2500 kg Length/width/height: 3.00x1.30x1.90 m Drive: Pumps/motor: 11 kW Heating output: 3.3 kW Total output: 14.3 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request