Used Chiron Mill 2000 for sale (9)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 29,688 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: 840D-SL, total height: 1,350 mm, overall weight: 110 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 60,000 W, number of axes: 4, This 4-axis CHIRON Mill 2000 High Dynamics was manufactured in 2018. It features a single-spindle head, HSK-A 63 tool holder, and a maximum spindle speed of 20,000 rpm. The machine offers X-axis travel of 2000 mm, Y-axis travel of 630 mm, and Z-axis travel of 550 mm, with rapid traverse speeds of 75 m/min. Consider the opportunity to buy this CHIRON Mill 2000 High Dynamics vertical machining centre. Contact us for more information about this machine. Fjdpfx Agex D Dr As Tspd Additional equipment • Nominal pressure: 200 bar • Test pressure: 260 bar • Temperature range: -10 to 120 °C • Bypass opening pressure: 7 bar • Differential pressure indicator: 5 bar • Maximum voltage (AC): 250 V // Maximum voltage (DC): 200 V • Maximum switching current: 1 A • Switching power: 70 W • Protection class: IP 65 • Weight: 37 kg • Lubrication: Oil-air • Maximum oil reservoir temperature of the hydraulic fluid: 55°C Machine Benefits Technical Machine Benefits • Main spindle max. Torque: 75 nm • Spindle head version: single-spindle Extra Information No swiveling spindle tchgear cooling device: Dimensions: 400 mm (W) x 950 mm (H) x 260 mm (D) Set flow rate: 40 l/min Discharge pressure at 50 Hz: 4.0 bar Rated power: 1.5 kW Maximum rated current: 4.1 A Unit: Dimensions: 600 mm (L) x 600 mm (W) x 1350 mm (H) Weight: 110 kg Rated connected load: 4.60 kW Maximum rated current: 9.20 A Maximum fuse: 16 A Table Rotary table: Transport load without counter bearing: 300 kg Max. axial load: 9000 N Max. radial load: 40000 N Max. tilting moment: 2000 Nm Max. transmittable torque from worm to worm gear: 30 Nm Counter bearing: Transport load for vertical use with rotary table NC1.03: 600 kg Required clamping pressure of the hydraulic clamp (nominal pressure): 75 bar Permissible clamping pressure of the hydraulic clamp: 85 bar Permissible pressure peak of the hydraulic clamp: 120 bar Permissible tangential moment with hydraulic clamp: 1000 Nm Dimensions Machine Depth 600 mm

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 550 mm, table length: 2,600 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm. Additional equipment • Chip conveyor Machine Benefits Fpjdpfeyi Eh Dox Ag Tsd Technical Machine Benefits • Rapid feed 40 m/min • Tool magazine with capacity for 24 tools

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Fodpfx Ageymnyks Tspd Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Condition: used, Year of construction: 2014, x-travel 2000 mm y-travel 630 mm z-travel 550 mm Control Siemens 840 D total power requirement 7,5 - 22,5 kW weight of the machine ca. 10,5 t Maximum table load:1,000 kg / m table length Movement range: X-axis:2000 mm Y-axis:630 mm Z-axis:550 mm Speed range up to:12,000 min-1 Maximum speed range:140 Nm Drilling power:average 42 mm (with insert drill) Milling power:600 cm³/min Tool places:24 Tool shaft:HSK A 63 DIN 69893 Fpjdpfx Aoyan Rcjg Tod Tool average:max. 75 mm Tool average with: free neighbouring places:max. 160 mm Tool length:max. 320 mm Tool weight:max. 8 kg (max. magazine load 100 kg Tool change time:approx. 1.5 s (depending on control

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, Chiron MILL 2000 Machining Center For sale is a Chiron MILL 2000 machining center from 2006. The machine is in good condition and ideally suited for the machining of large and long workpieces. Manufacturer: Chiron Model: Mill 2000 Year of manufacture: 2006 Technical specifications: • Travel: X 2000 mm / Y 500 mm / Z 550 mm • Spindle: 12,000 rpm HSK 63 • NC swivel head • Tool magazine: 40 positions (chain magazine) • Control: Siemens • Machine weight: approx. 9,600 kg Fjdpfx Agjxcpy Nj Tspd Equipment: • 40-position tool magazine • Chip conveyor and coolant system • NC swivel head • High-pressure system Condition & Service: The machine is fully operational and available immediately. Loading and transport can be arranged. Location: Germany (Stuttgart area) Price: negotiable

Condition: excellent (used), Year of construction: 2005, operating hours: 71,034 h, functionality: fully functional, High-quality 5-axis machining center CHIRON MILL 2000 immediately available. Including rotary table. The machine has a particularly demanding maintenance history and operated in a two-shift system. X / Y / Z travel: 2,000 / 500 / 550 mm Max. pendulum operation: 2 × 750 mm Rapid traverse: 40 m/min Feed force X/Y: 5,000 N Feed force Z: 10,000 N Working area with NC-swivel head B-axis ±100° Resolution: 0.001° Repeatability: ±10'' Drive torque: 280 Nm Clamping holding torque: 1,400 Nm Travel X: 2,000 mm Travel Y: 480 mm Travel Z vertical/horizontal: 630 / 715 mm Distance spindle taper – swivel axis: 185 mm Distance spindle taper – table surface: 90 mm Distance spindle axis – table surface: 190 mm Distance reference point – table center: 230 mm Distance table center – end of travel: 250 mm Spindle Tool holder: HSK 63 Power: 22 kW Speed range: 20–12,000 rpm Max. torque: 140 Nm Front spindle bearing Ø: 70 mm Tool clamping force: 6,500 N Projection spindle to cover: 220–720 mm Distance spindle taper – table surface: 90–640 mm Tool system Tool stations: 20 (option 40) Fedpoxiwf Hsfx Ag Tjpd Max. tool Ø: 75 mm Max. tool Ø with free adjacent positions: 125 mm Max. tool length: 280 mm Max. tool weight: 8 kg Tool change time: 1.5 s Chip-to-chip time: 5 s Machining capacity Drilling capacity in ST60 (carbide): 42 mm Tapping: M30 Milling capacity in ST60: 600 cm³/min Clamping area / base table Length: 2,600 mm Width: 550 mm T-slots: 2 × 18 H12 Reference slot: 18 H8 Table height: 900 mm Supply / Dimensions Coolant tank: 200 l Total power consumption: 20 kVA Machine weight approx.: 9.5 t Compressed air connection: 6 bar Total length: 5,159 mm Cabin width: 2,495 mm Overall height: 2,500 mm Control panel width: 2,870 mm Control panel height: 1,830 mm Option High-Speed Package Rapid traverse: 60 m/min Chip-to-chip time: approx. 4 s Tool stations: 40 Y travel: 630 mm Accessories: No tools or tool holders included. Mecatool included. Clamping devices and fixturing system only available upon separate request.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: B02208348000, travel distance X-axis: 2,000 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 92, TECHNICAL DETAILS Fedpfx Ajw Nhxxog Tjpd Travel Paths X-axis travel: 2,000 mm Y-axis travel: 610 mm Z-axis travel: 630 mm Tool Magazine Positions: 92 Performance Data Axis acceleration: up to 17 m/s² Rapid traverse: up to 75 m/min Spindle Specifications Torque: up to 280 Nm for heavy-duty machining Speed: up to 20,000 rpm for aluminum parts MACHINE DETAILS CNC control: Siemens 840 D EQUIPMENT Direct drives for rotary axes NC swivel head Hydraulically optimized clamping devices Note: The machine is currently not under power. An inspection under power can be arranged upon request.

Condition: excellent (used), Year of construction: 2013, Heidenheim TNC 530, SK 40, 12,000 rpm, 40 tool positions, through-spindle coolant, direct measuring system on all axes, central lubrication system, automatic loading doors, measuring probe, Fodpfxjxfqyvs Ag Tspd

Condition: like new (used), Year of construction: 2012, Model: MILL 2000 5 axis CNC SIEMENS 840 X, Y, Z (mm) 2000 - 480 - 630 Swiveling head (B axis) +/- 100°. Rotating spindle NC-WENDER with vice Bar machining Milling head 12.000 rpm / 140 Nm Tools 163 Fpodpfx Agjiraffo Ted HSK-A 63 DIN 69893 IKZ 70 bar Heidenhain linear measuring system Measuring probe 3D touch probe Renishaw Chip conveyor