Used Felder Sliding Table Saw for sale (111)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Bcsdpfowp Ri Ujx Afcsw Reference: R-D1618

Condition: like new (used), Year of construction: 2017, For sale is a Felder RL-300 clean air dust extraction unit with a maximum airflow of 6,000 m³/h. The extraction unit is in like-new condition and has been inspected and reconditioned by our professional staff. Technical data: - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm (right) - Chip container volume: 2 x 210 liters - JET filter cleaning - Fire extinguishing system with water connection Bcjdpfx Asyffbvjfcjw - 11 HP (8.2 kW) motor / 400 Volt 32A - Automatic star-delta starter The clean air unit is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-N4529

Condition: used, Year of construction: 2010, The machine operates perfectly; the front glue unit requires cleaning. Fully operational Year of manufacture: 2010 Radius scraper Surface scraper Cleaning unit Bsdpfex Hqdmex Afcjcw Jointing cutter up to 3 mm Nesting milling unit Pneumatic feed stop Polishing Machine no.: 200.07.011.10

Condition: used, Year of construction: 2015, height adjustment type: mechanical, - Year of manufacture: 2015 - Single owner. EQUIPMENT: Electrical Equipment - Supply voltage: 3x 400 V - Supply frequency: 50 Hz Workpiece Dimensions - Edgeband thickness: 0.4 - 3.0 mm - Workpiece thickness: 10 - 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units - Edgeband feeding from a reel via a feed plate - Edgeband feeding thickness from 0.4–3 mm, manual feeding of single strips - Guillotine shears for trimming edgeband from the reel up to 3 mm thickness - Gluing unit for granulated hot-melt adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing/fixing roller - Saw trimming unit, 9,000 rpm, 0.18 kW, HW saw blades Z= 16, Ø 80 mm - Multifunctional milling unit, 12,000 rpm, 0.22 kW, radius machining, straight milling, chamfering - Radius scraper unit, mechanically engaged, for R= 2 mm - Flat scraper unit, mechanically engaged Operation: - Control panel with LCD display and keyboard - Quick, tool-free unit adjustment system (Quick system) Feed: - Edged workpiece transport by chain with track - Feed speed: 8 m/min - Extendable support Bodpfxsya Etho Afcjcw General data: - Extraction connection Ø 120 mm Overall dimensions: - Length: 2000 mm - Width: 800 mm - Height: 1500 mm - Weight: 360 kg On customer request: - The machine is suitable for processing PVC and ABS edgebanding 0.5 - 3 mm - Edgebanding speed approx. 7 m/min - Milling top and bottom with chamfer or R2 radius - Flat scraper - 1.2 kg Teflon glue tank - Pre-cut guillotine - Edgeband trimming with two saw units - Quick machine calibration system by placing a piece of edgeband in the dedicated clamp - The machine has been regularly serviced, lubricated, and cleaned, ensuring its excellent technical condition. - An ideal solution for demanding carpentry workshops and manufacturing plants.

Condition: as good as new (ex-display), Exhibition Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, with a maximum air flow of 4,000 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical Data: - H3 dust-tested - Extraction connection diameter: 200 mm - Extraction possible on both right and left sides - Automatic chip shaker - Steel impeller Bsdpfexdkzqex Afcocw - Max. air flow 4,000 m³/h - Minimal space requirement: 1,775 x 898 x 2,005 mm (L x W x H) - Year of manufacture: 2022 - Machine No.: 31.04.114.22 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-L0CE0

Condition: used, Year of construction: 2013, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, Weight: 1.250 kg Price: On request Edgebander Serial number: 200.04.007.13 400V 11kW 3PH 50HZ 28A multifunction trimming unit Glue unit Bedpfx Aowlv D Nofcscw Workpiece height 8-60mm - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 200.04.007.13 - Transport dimensions: 4800mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a Felder RL-160 clean air extraction unit with a maximum air flow rate of 3,200 m³/h. The extraction unit is in excellent condition and has been inspected and serviced by our specialists. (Fully functional) Technical data: - Max. air flow rate: 3,200 m³/h - Filter surface: 10 m² - Extraction connection Ø: 160 mm - Manual filter cleaning - H3 dust tested - Year of manufacture: 2020 Bcsdpfx Afowp Rgmecew The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,265 mm, travel distance Z-axis: 120 mm, saw blade diameter: 120 mm, Equipment: CE marking, Dismantling and loading can be handled by the seller! TECHNICAL DETAILS Working area X: 3,250 mm Working area Y: 1,265 mm Working area Z: 120 mm Tool holder: HSK-F63 Tool changer: 10 positions, mounted on the milling head Drilling and sawing units Vertical drilling spindles: 12 Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Groove milling unit X-direction: 1 Saw blade diameter: 120 mm Table system Pod and rail table: available Consoles: 6 MACHINE DETAILS Drive data Main motor power: 9.2 kW Total connected load: 15 kW Vacuum pump capacity: 100 m³/h Bedpfxeyddqms Afcocw EQUIPMENT Positioning aid Safety mat Digital LED display on the consoles Auxiliary device for tool change Two rows of stops Workpiece supports Handheld control device Pendulum processing CE marking

Condition: new, Year of construction: 2007, machine/vehicle number: 0711ST0619, functionality: fully functional, feed rate X-axis: 13 m/min, rotational speed (max.): 12,000 rpm, Dismantling and loading can be handled by the seller! Auction of an unused Format 4 Felder Perfect 40! TECHNICAL DETAILS Feed rate: 13 m/min Maximum material thickness: 3 mm Main trim saw motor power: 0.5 kW Main trim saw motor speed: 12,000 rpm Trimming and profile unit motor power: 0.68 kW Trimming and profile unit motor speed: 12,000 rpm Polishing unit motor speed: 1,400 rpm MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3N Frequency: 50 Hz Power: 8 kW EQUIPMENT Guillotine for edging material up to 3 mm Teflon-coated glue pot for 3 kg EVA granulate Audio generator Bsdpfx Ajyddmnjfcjcw Glue roller with quick-change system Pneumatic pressure unit, 1 driven and 2 conical pressure rollers End trim saws with carbide-tipped blades Z = 24, d-100 x 20 x 3.2 mm Trimming and profiling unit with foldable option up to 15° Edge scraper for R = 2 mm Polishing unit with 2 motors

Condition: new, Year of construction: 2008, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 9 m/min, overall weight: 750 kg, rotational speed (max.): 12,000 rpm, Dismantling and loading can be handled by the seller! Auction of an unused Felder G 500! TECHNICAL DETAILS Edge thickness: 0.4-5 mm Workpiece height: 8-60 mm Feed speed: 9 m/min Spindle speed of milling unit: 12,000 rpm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Radius scraper unit: R = 2 mm Polishing unit: 2 motors at 1,400 rpm MACHINE DETAILS Dimensions & Weight Bjdpoyddgzjfx Afcjcw Dimensions (L x W x H): 3,200 x 1,100 x 1,550 mm Weight: 750 kg FEATURES High-performance chain feed Support for coiled edge material Guillotine blades for cutting coiled edges up to 3 mm Glue roller for EVA granulate from the Teflon-coated glue pot Spring-loaded pressure unit with 1 rubber pressure roller and 2 drive rollers Milling unit 0.27 kW, 100-tooth 24-tooth saw blade

Condition: new, functionality: fully functional, edge thickness (max.): 2 mm, total height: 1,250 mm, total length: 2,100 mm, total width: 900 mm, plate height: 45 mm, Dismantling and loading can be handled by the seller! Auction of an unused Felder G 200! TECHNICAL DETAILS Edge thickness: 0.4 - 2.0 mm Panel height: 10 - 45 mm Feed speed: 5 m/min Bsdpfeydc Uwox Afcscw MACHINE DETAILS Dimensions (L x W x H): 2,100 x 900 x 1,250 mm Required compressed air: 6 bar EQUIPMENT Pneumatic end-cutting guillotine Flush and radius trimming module (a = 15°, R = 2 mm) Teflon glue pot Electric temperature control (20 - 250 °C)

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW Bodpfxsw H Rzxj Afcecw – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Condition: excellent (used), Year of construction: 2014, Motor power: 7.5 HP (5.5 kW) Motor voltage: 400 V (50Hz) Planing width: 410 mm Planing shaft: 4-blade field system planing shaft No. of planing knives: 4 Planer table length: 2,200 mm Planer fence: 1,300 x 170 mm Chip removal: 5 mm Suction connection: 120 mm Weight: 510 kg Dressing guard EURO Standard Standard equipment - Planing shaft with 410 mm planing width - Infeed planer table with table length 1080 mm - Jointer fence with ruler 1300 x 170 mm - EURO Standard planer guard - 4-blade field system planing shaft Location: ex stock 54634 Bitburg - immediately available - Bcjdpoh Hp Hyefx Afcow

Condition: like new (used), Year of construction: 2023, For sale is a demonstration Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was only briefly used at our premises for demonstration purposes. It is therefore considered as new and is offered with full warranty / guarantee. Technical specifications: - Table size: 840 x 700 mm - Cutting height: 460 mm - Cutting width: 690 mm - Table tilt: -5° to +45° Bcodpfxoww Hhvj Afcow - Saw blade length: 5120 mm - Weight: approx. 400 kg - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-A0117-67

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Bcedpfjxlt Shsx Afcjw Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Year of construction: 2021, condition: ready for operation (used), This Felder RL 300 was manufactured in 2021. It features a new extraction system, never used, with a maximum volume flow of 6000 m3/h and a nominal volume flow at 20 m/s of 5090 m3/h. The machine includes a filter area of 50 m2 and dual 250-liter chip collection containers. Sound pressure level is at 75 dB. For more information about this machine, please reach out to us. Bjdpfex D Ex Rox Afcecw Application Types Other Woodworking Machinery

Condition: ready for operation (used), Year of construction: 2020, cutting length (max.): 5,300 mm, cutting depth: 80 mm, Technical Specification Bsdpfx Afex D D Scscocw Max. Cutting Length 5300 mm Max. Cutting Depth 80 mm This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. Application Types Edge Banding Bcjdox D D R Sepfx Afcsw

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Diamond cutter and glue roller newly installed. This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information. Bjdex D Rkljpfx Afcocw Application Types Edge Banding

Year of construction: 2021, condition: ready for operation (used), This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information. Application Types Bcsdpfxex D Exqe Afcsw Sawing (Wood)

Condition: ready for operation (used), Year of construction: 2021, This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7" touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information. Application Types Bcodpox D Eyhofx Afcow Sanding

Condition: excellent (used), Year of construction: 2010, 4 kW motor Bedoul Utmspfx Afcscw 4 knives Table length 198 cm Table width 41 cm

Condition: used, functionality: fully functional, filter area: 50 m², noise level: 75 dB, extraction nozzle diameter: 300 mm, nominal flow rate: 5,090 m³/h, Technical data Max. airflow 6000 m3/h Nominal airflow 20 m/s 5090 m3/h Nominal pressure 20 m/s At extraction speed 2680 Pa Extraction connection Ø 300 mm Bcsdpfex H Stisx Afcow Cartridge filter - Filter surface 50 m2 Noise level 75 dB Chip container 2x250 l - With cartridge filter - With chip remover - With JET cleaning

Condition: new, Year of construction: 2022, functionality: fully functional, noise level: 75 dB, total height: 2,285 mm, total length: 2,275 mm, total width: 1,150 mm, extraction nozzle diameter: 300 mm, space requirement height: 2,985 mm, space requirement length: 2,640 mm, The Felder RL300 industrial extractor has been put up for sale due to the failure of the tender. Brand new, unopened packaging for 75% of the new price. Guaranteed, with commissioning Description: Air flow, max: 6000 m3/h Nominal air flow: 20m/sec, 5090 m3/h Vacuum: 450 Pa Filter surface: 50 m2 Extraction nozzle diameter: 300 mm Modern, bright, clean design Great and efficient performance Chipboard storage Cartridge filter JET cleaning Year of manufacture: 2022 Bsdpjx H Srrsfx Afcjcw

Condition: excellent (used), Year of construction: 2011, It is in perfect working condition, looks very good and has few operating hours. It has pre-milling, circular saw cutting, up and down milling, radius tickling, surface tickling, and polish. Bedpfoxwqmajx Afcecw