Used Felder Sliding Table Saw for sale (123)

Condition: like new (used), Year of construction: 2022, DEMONSTRATION MACHINE!!! For sale is a used Felder thickness planer D9-51 with a thickness capacity of up to 254 mm. The machine is in like-new condition and has been refurbished and inspected by our professional technicians. (fully functional) Technical data: - Planing width: 504 mm - 4-knife cutter block (replaceable knives system) - Electric thickness table adjustment with LED display - Planing thickness: 4–254 mm Iasdpoxzph Djfx Ahusl - Variable feed rate: 4–16 m/min - Max. chip removal: 8 mm - 7.5 HP (5.5 kW) motor, 400 Volt - Year of manufacture: 2022 The planer is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer, thicknesser, thicknessing machine, Felder Reference: R-D1618

Condition: excellent (used), Felder F 700 M Shaper (Spindle Moulder) Electric spindle height adjustment and manual angle adjustment from 0 to +45 degrees Interchangeable 30 mm spindle Long tables: 215 cm 4 spindle speeds 5.5 kW motor Spindle lock Brake Very good condition, Iodpfx Ajxyfrpjhueal machine fully checked and ready for operation.

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes Iaodpfexix Hxjx Ahuol End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes

Condition: excellent (used), Year of construction: 2017, operating hours: 100 h, functionality: fully functional, Edgebander , Felder G330 , Exelent , 2017/18 , Low working hours , Iaodpfx Ahoxz Ia Ssujl Teflon Gluepot , Quck system adjustment , Flat scraping for finisin Unit ,

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Iodexrahcspfx Ahujal Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: as good as new (ex-display), functionality: fully functional, table length: 2,200 mm, table width: 800 mm, height adjustment type: electric, table height adjustment: 300 mm, grinding belt length: 5,750 mm, grinding belt width: 150 mm, overall weight: 650 kg, input frequency: 50 Hz, power: 2.94 kW (4.00 HP), input voltage: 400 V, grinding belt speed: 25,000 mm/s, grinding height: 600 mm, Further technical data Extraction connection: 160 / 140 mm Feed speed: 4 - 16 m/min With the FS 722 belt sanding machine from Felder, you can process workpieces up to 4300 mm in length effortlessly. Aluminum belt rollers, the professional sanding pad, and the frame sanding device are already included in the standard version at no extra cost. Standard equipment: - Frame sanding device - Professional sanding pad - Aluminum belt rollers Iodpfjxtpplox Ahujal - Thickness table adjustment precise to tenths of a millimeter with handwheel and integrated digital display - Steel infeed roller - Steel outfeed roller, micro-serrated - Spring-loaded segmented pressure beam on infeed side

Condition: good (used), For sale is a mortising drilling carriage suitable for Felder machines from model year 1992 onwards. The drilling carriage is in good condition and has been reconditioned and inspected by our specialist staff. (Fully functional) Iasdpfx Ahsxzglgsujl Technical data: - Incl. coupling and drive unit - With ADAPTER for SERIES 6 / 7 - Drilling height adjustment range: 135 mm - Drilling length: 250 mm - Drilling depth: 155 mm The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: pedestal drill, column drilling machine, drill Reference: R-D1618

Condition: used, Felder AD 741 Surface and Thickness Planer Spiral cutter block Main motor 4 kW, Surface planer table length 2000 mm, Planing width 410 mm, Iedpfx Ahsxxavmousal Thicknessing capacity height 230 mm, 1 feed speed, Manual thickness table adjustment with digital height indicator Machine ready for operation, quiet

Condition: used, Year of construction: 2017, Fw 1102 Perform Year of manufacture: 2017 5 operating hours 15 kW motor with brake Electric table height adjustment Continuously variable feed 2.5 – 18 m/min Sanding height: 3 – 170 mm Abrasive belt dimensions: 1120 x 1900 mm Belt blowing, timer-controlled Sanding width: 1100 mm Extraction connection: 2 x 160 mm and 1 x 120 mm Vacuum carpet with integrated blower in the machine frame Iedpoxrwn Tefx Ahueal 1st unit: rubber-coated profiled contact roller 2nd unit: electro-pneumatic segmented sanding pad, 25 mm segment width, for veneer sanding work With lacquer sanding, digital grit compensation Pneumatic sanding belt oscillation Roller table extension on both sides Scotch-Brite brush unit at the machine outlet, 150 mm diameter Electronic sanding belt run monitoring Includes 30 sanding belts

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total length: 3,350 mm, workpiece height (max.): 45 mm, total width: 1,510 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints Iaodpfetp T Dtjx Ahusl * Connected load - 7 kW * Edge thickness - 0.4-350 mm * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Iaedpfx Ahexbq Ulouol Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg

Condition: new, Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, total width: 1,060 mm, total height: 1,180 mm, filter area: 2 m², negative pressure: 550 Pa, volume flow: 3,600 m³/h, FELDER FSW 2000 mobile spray wall Isdjw Hcp Uspfx Ahueal 3x400V 50Hz, 1.1 kW, air flow rate 3600 m³/h, pressure increase 550 Pa, exhaust diameter 300 mm, outlet throttle valve D-300 mm to smooth exhaust airflow, dimensions 2500x1060x1180 mm Suitable only for water-based paints NEW including accessories as shown in the picture

Condition: like new (used), DEMONSTRATION MACHINE Ijdpfxoxxi T Us Ahueal For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117

Condition: used, Year of construction: 2022, 0,4 - 5 mm Iodpsxpn Ufjfx Ahueal Workingpiece thickness from to 10 - 45 mm Feed speed 8 m/min.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: FBP 60, total width: 1,280 mm, total height: 1,540 mm, total length: 1,900 mm, briquette diameter: 60 mm, overall weight: 1,300 kg, oil tank capacity: 230 l, I am selling my almost new Felder FBP60 briquetting press (50-70kg) with screw gearbox, fill level sensor, and round silo, 3×400V 50Hz 9.0kW, weight 1300kg. Top condition!!!!! Purchased in September 2023. The machine is like new. For sale due to business closure. Viewing possible at any time. Isdpfx Aow H Dulehueal

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Iodovf D S Aspfx Ahujal Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: used, Year of construction: 2009, functionality: fully functional, working width: 950 mm, grinding width: 950 mm, - Austrian-made - Year of manufacture: 2009 - Combination pad (trzewik kombi) Iodpfx Ahexlr U Iouoal TECHNICAL PARAMETERS: - Sanding width: 950 mm - Sanding height: 4–170 mm - Main motor power: 11 kW - 1st unit: rubber drum with pneumatic engagement - Drum diameter: 110 mm - 2nd unit: combination pad (trzewik kombi) - Cleaning brush: 1.1 kW - Pneumatic engagement of rubber drum - Pad with pneumatic engagement - Pneumatic oscillation - Air blower on sanding belt - Electric height adjustment - Sanding belt speed controlled by inverter - Electronic positioning of sanding height - Two feed speeds: feed motor power 0.55 kW - Minimum workpiece length: 400 mm - Extraction port diameter: 3 x 130 mm and 2 x 80 mm - Machine dimensions (L/W/H): 170 x 150 x 210 cm - Weight: approx. 800 kg

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Saw adjustable from 0–45° Saw lifting and lowering Iaedpewi Uftofx Ahujl Digital measurement display on right side Cutting width right: 850 mm Spindle diameter: 30 mm Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Spindle covers Main saw motor: 5.5 kW Milling motor: 5.5 kW European CE Certificate

Condition: like new (used), Year of construction: 2021, For sale is an almost new Felder thickness planer D9-51 with a planing height of up to 254 mm. The machine is on display in our showroom and is therefore in like-new condition. Technical data: - Planing width: 510 mm - 4-knife cutterhead system - Thicknessing height: 3-254 mm - Thickness table length: 900 mm - Max. stock removal: 8 mm - Electrically adjustable thicknessing table with LED Power Drive display - Infinitely variable feed speed from 4-16 m/min - 7.5 HP (5.5 kW) motor - Star-delta starter Iedpfx Aexxi Rtjhusal - Exhibition machine, like new - Year of manufacture: 2021 The planer is located in A-5431 Kuchl and can be viewed at any time during our business hours. Subject to prior sale!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, FELDER G330 Edge Bander Used edge bander, post-service inspection. Iajdpfx Aoxly I Aehuol - Machine in excellent technical condition. - Year of manufacture: 2013. - One-owner machine. - Recently serviced. EQUIPMENT: Electrical equipment: - Supply voltage: 3x 400 V - Power frequency: 50 Hz Workpiece dimensions: - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units: - Edge feeding from coil via feed plate - Edge feeding for thicknesses 0.4–3 mm, manual feed for individual edging strips - Guillotine shear for trimming coil edges up to 3 mm thick - Gluing unit for hot-melt granulate adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing roller - Saw trimming unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for rounding, straight milling, and chamfering - Mechanically-activated corner scraper unit for R=2 mm - Mechanically-activated flat scraper unit Operation: - Control panel with LCD display and keypad - Quick, tool-free unit adjustment system Feed: - Workpiece feed with chain-type conveyor - Feed speed: 8 m/min - Extendable support General data: - Extraction port Ø 120 mm Overall dimensions: - Length: 2,000 mm - Width: 800 mm - Height: 1,500 mm - Weight: 360 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where to see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE, Poland Nationwide machine transport! Phone: 663 495 647 (German) Phone: 664 335 475 (English) Phone: 530 632 386 (English)

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 320.03.003.13, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 3,120 mm, feed length Y-axis: 2,160 mm, feed length Z-axis: 105 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 11 kVA, torque: 4 Nm, controller manufacturer: WoodFlash CAD, H10 CNC Control, controller model: H10 CNC Control, Windows 10, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, total height: 2,510 mm, total length: 7,760 mm, total width: 4,860 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 3,800 kg, spindle motor power: 10,000 W, number of spindles: 1, number of slots in tool magazine: 8, tool length: 300 mm, tool diameter: 180 mm, tool weight: 1,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Engine power: 13.59 PS/HP (10 kW) Year of manufacture: 2013 Motor voltage: 3x 400 V Iajdpsw Tkm Tofx Ahusl Motor frequency: 50 Hz Weight (kg): 3800 Dimensions (L x W x H mm): 8768x4864x2510

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Extraction connection: 2 x 120 mm Feed speed: infinitely adjustable 2.5 - 10 m/min Standard equipment - Maintenance interval control - Plain text error messages - Constant infeed height – fixed table, 900 mm - Electric height adjustment incl. fine adjustment from the control panel - Feed speed steplessly adjustable from 2.5 to 10 m/min via inverter at the control panel - Endless belt conveyor Isdpfew Axi Asx Ahuoal - Automatic feed mat centering - 1st brush unit with selectable steel brush, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - Dimensions: 1455 x 1070 x 1250 mm - Required air pressure: 6 bar Optional equipment 022 7.5 HP (5.5 kW) motor power, 1st unit 024 7.5 HP (5.5 kW) motor power, 2nd unit 027 Oscillation control for 1st and 2nd brush units 028 Opening height 250 mm instead of 200 mm

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Technical data: - Max. airflow rate: 3200 m³/h Iedpsxnxm Nefx Ahusal - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117

Condition: as good as new (ex-display), Year of construction: 2023, Exhibition Machine Iaodpfx Ahsxd Aiteuel For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air volume flow of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our specialist staff. (Fully functional) Technical data: - H3 dust tested - Residual dust content < 0.1 mg/m³ - Max. air volume flow 1900 m³/h - Chip collection volume 200 litres - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117-102

Condition: like new (used), Year of construction: 2024, Demonstration machine For sale is our Felder RL-300 clean air extraction unit from our showroom, with a maximum air flow rate of 6,000 m³/h. The extraction unit is in as-new condition and has been inspected and serviced by our technical staff. Technical specifications: - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm - Chip container volume: 2 x 210 liters - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) Iedpfx Ahsxdlwmjuoal - Automatic extinguishing system - Steel impeller - Motor power: 8.2 kW - Year of manufacture: 2024 The clean air unit is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117