Used Graule Zs 85 N for sale (78)

Condition: used, machine/vehicle number: 18656, Schnitthöhe : 85 mm Schnitthöhe bei 45° Neigung : 60 mm Schnittbreite bei 90° : 380 mm Ppolhcdwevzc S Tj Der Schnittbreite bei 45° : 265 mm Neigbar : einseitig Schwenkbar : zweiseitig Sägblattdurchmesser : 300 mm Sägeblattbohrung : 30/40 mm Motorleistung : 1 kW

Year of construction: 1985, Condition: good (used), machine/vehicle number: xxxxx, Cutting to length - and mitre - rafter cut - circular sawing machine Technical data: - Saw blade dimensions 300 x 3.5 x 40 mm - Horizontal mitre adjustment 45° - 90° - 20 - Vertical mitre adjustment 60° 90° - 45 - Cutting range - at 90° W 380 x H 85 mm - at 45° W 265 x H 85 mm - at 45° inclined H 65 mm - Saw blade speed 2750 rpm - Drive 220 V - Space requirement approx. W 700 x H 1400 x D 1400 mm Polhcsf H Arqjdw Dopr - Weight approx. 180 kg - with: - hydr. feed brake - Saw blade

Condition: used, Year of construction: 1986, incl. 2 saw blades d, good conditionmake Grauletype ZS 85 Nyear of manufacture 1986motor 2.2 kWcutting height approx. 85 mmcutting length approx. 380 mmblade diameter approx. 300 mmsaw blade bore approx. 40 mmswivel right up to 45°swivel left up to 45°tiltablemachine basefeed brakematerial system made of aluminum-steelnew price approx. 5.000,00 € with accessoriessuction connection D 80 mmweight approx. 150 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Pelhsvwfg Eecdw Djpr

Condition: new, NEW Description: - Crosscut and miter saw with maximum cutting height of 135 mm - Machines can be mitered in 2 levels - Stable gray cast iron construction - Precise ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Fast miter adjustment up to 25° horizontally and up to 45° vertically - Readjustable fixed stops at 90° and 45° - Lower saw blade guard can be connected to the extraction system Ppjlhcevwf T Sjdw Dsr Scope of delivery: Crosscut and miter saw type ZS 135 N without saw blade Technical data: - Motor: 400 V / 2.2 kW - Speed: 3800 rpm - Cutting length: 430 mm - Cutting width: 430 mm at 90° / 300 mm at 45° - Cutting height: 135 mm at 90° / 92 mm at 45° - Miter range horizontal: 45°-90°-25° - Miter range vertical: 90°-45° (tilted to the left) - Saw blade diameter: 350 mm - Extractor nozzle diameter: 100 mm - Weight: 100 kg

Condition: good (used), Year of construction: 1996, machine/vehicle number: 1996-3-08, Offer 25036 Technical specifications: - Saw blade dimensions 520 x 3.5 x 40 mm - Horizontal miter adjustment 45° - 90° - 20° - Vertical miter adjustment 60° - 90° - 45° - Cutting range - at 90° L 450 x H 200 mm - at 45° L 295 x H 200 mm - at 45° inclined H 140 mm - Working height 900 mm - Saw blade speed 3500 rpm - Drive 400 V / 5 kW Ppolhcdswfqptsw Dor - Space required approx. W 900 x H 1600 x D 1600 mm - Weight approx. 250 kg - with: - Tension brake - Saw blade - Outfeed roller conveyor with manual stop approx. 6000 mm - Original Machine stand

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, saw blade diameter: 520 mm, cutting height (max.): 200 mm, Motor 5 kW / 400 V Motor with brake and automatic star-delta circuit Saw blade holder 50 mm Saw blade diameter 520 mm Saw blade speed 2,800 rpm Cutting width at 90° 420 mm Cutting width at 45° tilted 295 mm Cutting height at 90° 200 mm Cutting height at 45° inclined 140 mm Saw can be tilted to one side up to approx. 25° to an acute angle and tilted flat to the left up to 30° Machine weight approx. 250 kg Equipment: HM circular saw blade 520x4.0/2.8x50 mm 60 WZ, neg. for wood Machine can be tilted to both sides from the front using a hand crank Hydraulic feed brake as reversing brake Laser device, laser beam with approx. 300 mm line length Pneumatic material clamping on both sides from above consisting of 2 vertical clamping cylinders adjustable, with roller valve Extraction system 400 V / 1.5 KW, 1900 m³/h, max. negative pressure 1700 Pa, Connection diameter 100 and 120 mm, with linen filter bag, plastic chip bag 110 ltr. and 2.5 m spiral hose (not permitted in commercial areas for wood dust due to the wood dust regulations) Automatic switch-on 400 V type ALV 10 Pjlhcjv Er Tnodw Depr Input and output each with a 230 V and 400 V socket Length stop type ST 60 RLH-ST 60, 8.0 m measuring length, left-hand side Length stop + roller conveyor, heavy-duty version Stop slide adjustable from the workstation using a handwheel, electronic-digital measurement display, stop slide pneumatically clampable, stop flap folds back, with steel rollers 60 mm Ø, roller spacing 200 mm, roller width 400 mm, with 6 support feet and connector, overall length 8.7 m Digital electronic display device type FIAMA EP6 for 230 V mains operation with electrical on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display

Condition: new, Year of construction: 2025, Functionality: fully functional, Technical specifications: Cutting height 200 mm Cutting height at 45° tilt: 140 mm Pivoting to the left up to 67° Pivoting to the right up to 45° 5 kW 1 Hydraulic feed brake (optional) Cutting length 420 mm at 90° position Cutting length at 45° tilt: 295 mm Pivoting to the left up to 60°, tilting to the right up to 30° The tilt adjustment is done from the front using a hand crank. 1 saw blade for wood, diameter 520 mm 1 heavy-duty cutting roller conveyor, length 6,000 mm, left-hand side. The stop is adjusted from the front using a handwheel. The length can be read digitally to the millimeter. The stop is pneumatically locked. 1 x 230-volt digital display 1 x heavy-duty feed roller conveyor, right-hand side, length 4,000 mm Pjlen R A Ewshcdw Depr Machine length 11,700 mm Completely mobile Machine packed on planks Images show a customer's machine.

Condition: new, Year of construction: 2025, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available - Ppslhcdji Dfidjw Dsr

Condition: new, Year of construction: 2025, machine/vehicle number: diverse, The professional for cutting to length, miter and bevel cuts The ZS 200 N is ideally suited for cutting to length, mitre and bevel cuts. Materials such as wood, PVC and aluminum profiles can be cut cleanly and precisely. The saw unit runs on a hardened guide arm and can be tilted horizontally on both sides for miter cuts. The N stands for tilt and means that the saw unit can also be tilted vertically to the side, making it easy to carry out rip cuts. Fact check ZS 200 N Crosscut and mitre circular saw with a maximum cutting height of 200 mm Sturdy cast iron construction precise ball bushing guide of the tool carriage on hardened and ground steel shafts manual saw feed fast miter adjustment up to 65° horizontal and up to 60° vertical Adjustable fixed stops Lower saw blade guard Can be connected to extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Polhcdoh Nu Iusw Dopr Technical details: Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 60°-90°-30° Saw blade Ø 520 mm Weight 310 kg Scope of delivery: ZS 200 N cross-cut and shifter saw Machine stand Machine can be tilted from the front on both sides Hydraulic feed brake HM Z 60 neg. circular saw blade Operating tool and hand crank

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Polhcsu R Sypsdw Depr Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 2019/72/23, saw blade diameter: 520 mm, cutting height (max.): 200 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 2,800 rpm, cutting length (max.): 500 mm, type of input current: three-phase, saw blade bore: 50 mm, space requirement length: 8,800 mm, space requirement width: 1,200 mm, length stop: 8,800 mm, input current: 16 A, I'm selling my Graule ZS 200N and Beck ESF 2 due to discontinuation. Mobile saw base Beck ESF 2 with Graule ZS 200N Mobile saw base; total length approx. 8600 mm for G-ZS 170 and 200 saws The base is mobile with 4 swivel casters (200 mm diameter), 2 of which have brakes Pslhcdjwauafow Dopr The extensions on the feed and stop roller conveyors are equipped with retractable support feet; the saw base is powder-coated gray-white RAL 9002; With drawing holder; with 5 crank supports, ensuring stability during work. With electrical power distribution and 3-way 230 V socket Exact A on the left side, track length 5,200 mm, measuring length from 400 – 5,960 mm with digital LED measurement display. The stop is pneumatically fixed – otherwise as per ESF 1 – measuring length including extension approx. 8,800 mm

Condition: used, Year of construction: 1981, Cutting height at 90° = 85 mm, pivoting Storage location: Nattheim Ppslhcdevvkppjw Dor

Year of construction: 1999, Condition: excellent (used), RADIAL ARM SAW Graule ZS 170 N Sawblade-Ø 420 mm Ppjlhcdsl Skkisw Dor shipping EU ~300euro

Condition: new, Year of construction: 2022, New machine Pjlekwhmfjhcdw Dopr Year of manufacture 2022 Motor 400 V / 5.0 kW speed 2800 rpm cutting length 420 mm Cutting width 420 mm at 90 295 mm at 45° Cutting height 200 mm at 90° 140 mm at 45 Saw can be tilted on one side up to approx. 25° to acute angles and tilted flat to the left up to 30°. Saw blade-Ø 520 mm x 50 mm suction nozzle-Ø 100 mm Weight 250kg With the following equipment options: - HM circular saw blade 520x4,0/2,8 x 50 60 WZ for wood - Machine can be tilted on both sides from the front via hand crank Availability: short term/2022 Location: Solingen

Condition: used, Year of construction: 2006, No. 04356 Crosscut and miter saw GRAULE ZS 85 N-S used, year of construction 2006 Saw can be tilted and pivoted 400 volt three-phase brake motor 2.2 kW Saw blade diameter 300 mm Cutting height 85 mm Cutting length 380 mm Material contact shoulder made of steel/aluminium Original GRAULE machine stand HM circular saw blade 300 mm for aluminum and plastics Transport dimensions on pallet approx. 1200 x 800 x 1800 mm LWH Weight approx. 150 kg In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place in the ACTUAL condition Technical information, description of condition, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Ppelhcemhf Ezedw Dsr Any warranty is excluded for used machines. The rule is "bought as seen". Terms of payment: Prices plus statutory VAT, payment before pickup or shipping Terms of delivery: ex warehouse or location

Condition: new, Year of construction: 2025, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Polhcok H Ic Uodw Djpr Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: excellent (used), Motor 220 - 240 V 1,6 kW cutting height approx. 85 mm Blade diameter approx. 300 mm Ppelhcemdqhwedw Dor You can call or write us. We can speak and write German and Russian. You can also send messages in English.

Condition: new, 400 Volt Drehstrom-Bremsmotor 5,0 kWSägeblattdurchmesser 520 mm,Sägeblattaufnahme 50 mm,Schnitthöhe 200 mmSägeblatt auf 45° geneigt: Schnitthöhe 140 mm,Schnittlänge 420 mm,mit Maschinenständer und Handkurbel hintenzur Neigungseinstellung Pjlhcdwovxr Ths Depr

Condition: new, Year of construction: 2025, - Type ZS 200 N Ppjlhcobfxxcedw Djr Saw blade diameter 520 mm, saw blade mounting hole 50 mm saw blade speed 2.800 rpm 400 Volt / 5 kW (S6/40%) Motor with brake and automat. Star delta motor control cutting width at 90°: 420 mm cutting width at 45° swivelled: 295 mm cutting height at 90°: 200 mm cutting height at 45° tilted: 140 mm Saw can be tilted on one side up to approx. 25° to acute angles and tilted flat to the left up to 30°. Machine weight approx. 250 kg -stable cast iron construction -precise ball-bearing guide of the tool slide on hardened and ground steel shafts -manual saw feed -quick miter adjustment up to 65 -adjustable fixed stops -lower saw blade guard can be connected to suction unit the machine can be moved with a lift truck - machine can be tilted on both sides from the front via hand crank - HM circular saw blade 520x4,0/2,8x50 mm 60 WZ geb. for wood

Condition: used, The Graule miter saw is pivotable for cutting to length and cutting mitres. Includes metal base frame. Psljuphh Eohcdw Djpr

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : Pjlhcet D Ht Aedw Depr - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motor1 x machine stand for type ZS 135 N and ZS 170 NTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Ppjlhcdwovwf Rde Dor

Condition: new, saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Pslhcdwst D Hmce Djpr Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motorTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Pslhcsvwf N Tedw Depr

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: Pslhcdst D Hk Ujw Depr - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand