Used Holzkraft Hse 22-1100 Ze for sale (215)

Condition: new, - New -Description:- Vertical version for splittingShort and meter wood- Robust and solid construction- Shock and scratch resistant due to high qualitypowder coating- Fast, tool-free gap height adjustment- Low base plate for easy,effortless loading of large logs- Phase inverter on all 400V models- Convenient transport with hand drawbardue to standard chassis with largePneumatic wheels and additional support wheel- Space-saving storage through simplelowerable cylinder- Powerful industrial hydraulic system- Two-hand safety circuit- With splitting material holderTechnical specifications:Dimensions and weightsLength approx. 1050mmWidth/depth approx. 1700 mmHeight approx. 2500mmWeight approx. 373.1 kgdrivePTO speed 540 rpmInput power 5.5 kWelectrical dataConnection voltage 400 VMains frequency 50 Hzdevice dataSplitting power max. 26.1 tGap length min. 560 mmGap length max. 1100 mmLog diameter min. 80 mmLog diameter max. 400 mmhydraulic systemHydraulic oil tank capacity 30 lItem No. 5981031 Ncedpfx Abjvwfzij Isl

Condition: new, - new -Description:- Vertical design for splittingshort and meter logs- Robust and solid construction- Impact and scratch-resistant thanks to high-qualitypowder coating- Quick, tool-free splitting height adjustment- Low base plate for easy,{loading of large logs- Phase inverter on all 400 V models- Convenient transportation with manual drawbarthanks to standard chassis with largepneumatic wheels and additional support wheel- Space-saving storage thanks to easylowerable cylinder- Powerful industrial hydraulic system- Two-hand safety circuit- With splitting material holderTechnical data:Dimensions and weightsLength approx. 1050 mmWidth/depth approx. 1700 mmHeight approx. 2500 mmWeight approx. 282 kgDrivePTO speed 540 min¯¹Device dataSplitting force max. 23.4 tSplitting length min. 560 mmSplitting length max. 1100 mmSplitting material diameter min. 80 mmSplitting material diameter max. 350 mmHydraulic systemTank capacity hydraulic oil 24 . 5981023 Ncodpfx Abjvxr Ryo Isl

Condition: new, Year of construction: 2025, Vertical design for splitting short and metre logs Low base plate for easy, low-fatigue loading of large logs Mechanical log lifting device brings heavy logs into position without strain on the operator's back With splitting material catcher Fast, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Comfortable transport with hand drawbar due to standard chassis with hard rubber wheels and additional support wheel Shock and scratch resistant due to high quality powder coating Space-saving storage due to easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type electric motor Input power 3,5 kW Electrical data Supply voltage 400 V Mains frequency 50 Hz Equipment data Splitting force max. 14 t splitting length min. 560 mm splitting length max. 1040 mm splitting material diameter min. 100 mm splitting material diameter max. 300 mm Hydraulic system Tank capacity hydraulic oil 7,5 l Location: ex stock 54634 Bitburg - immediately available - Ncedohkz Hmspfx Ab Iol subject to prior sale

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting Nodpfx Abewnrf Uj Iscl - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic - New exhibition machine -

Condition: used, Year of construction: 2025, The Holzkraft HSE 5-520 KH log splitter is designed for convenient and safe splitting of short logs for home or semi-professional use. Its compact design and easy operation enable efficient work even in tight spaces. Ideal for firewood preparation. Splitting force: 5 tons Njdpfx Aswxc Diob Iecl Splitting material length: max. 520 mm Splitting material diameter: max. 250 mm drive: Electric 230 V mass: about 50 kg

Condition: new, Year of construction: 2025, Cutting length: 5100 mm Cutting height: 2200 mm Cutting depth: 60 mm Scoring unit: yes Feed: manual Ncjdpfxohpma Ej Ab Isl Horizontal cut display: digital Vertical cut display: digital Saw blade diameter: 300 mm Swing-out material support: yes Saw blade speed: approx. 4000 rpm Motor power: 3 kW Machine length: 6300 mm Machine depth: 1800 mm Machine height: 3100 mm Weight: 850 kg

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, functionality: fully functional, overall weight: 130 kg, height adjustment type: mechanical, input voltage: 230 V, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, Profile and strip sanding machine S 220 Year of manufacture 2018 Nedpfxewa Nmge Ab Ijcl With stop rail With extraction nozzle Machine is available immediately

Condition: new, Holzkraft VPS 2241 VR Vertical panel saw 5600241 Precise vertical panel saw Smooth and ergonomic operation Nedpfx Aokktcfjb Ijcl Pre-scoring device for tear-free cutting quality Slat deflection is manually operated by a lever Continuous central workpiece support Two dimensional stops Transport rollers lifted by pedal for easy movement of heavy panels without damaging them Fixed material support for stable workpiece position Modular welded machine frame torsion-free and self-supporting Saw unit with chain guide and two operating levers Large opening for saw blade change TECHNICAL DATA: General information Cutting height 2200mm Cutting length 4100mm Cutting depth 60mm Saw blade diameter 250mm Saw blade speed 4800min¯¹ scoring saw blade diameter 80mm Scoring saw blade speed 8500min¯¹ Stops 2pcs Sound pressure level 89,2dB(A) Dimensions and weights Height (product) max. 3100mm Length (product) approx. 5300mm width/depth (product) approx. 1800mm Height (product) approx. 3000mm Weight (net) approx. 600kg Connection suction Suction connection diameter 1 x 100mm Air requirement suction min. 1000m³/h Air speed min. 20m/s Electrical data Power drive motor 3kW Supply voltage 400V Mains frequency 50Hz SCOPE OF SUPPLY: Saw blade Ø 250 x 30 x 3,2 mm Z80 trapezoidal scoring saw blade Ø 80 x 2,8-3,6 mm Z20 Holkraft dealer - accessories available on request!

Condition: new, Year of construction: 2025, Cutting length: 4100mm Cutting height: 2200mm Cutting depth: 60mm Scorer: yes Feed: manual Display horizontal cut: digital Nedpjhpma Njfx Ab Ijcl Display vertical cut: digital Saw blade diameter: 300mm Evasive material support: yes Saw blade speed: approx. 4000 rpm Engine power: 4 kW Machine length: 5300mm Machine depth: 1800mm Machine height: 3100mm Weight: 800kg

Condition: good (used), Year of construction: 2004, Sawblade tiltable 45 ° Ncjdpex Ti Dfofx Ab Iol Length of the rolling table 2000 mm cutting width 1270 mm Motor output 4,0 kW Cutting height 100 mm Saw blade diameter 315 mm

Condition: used, Year of construction: 2015, Stationary spindle moulder Table size: 1945 x 575 mm Max. spindle projection above table: 130 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle arbor diameter: 30 mm Spindle speeds: 3,500/7,000/10,000 rpm Motor power: 5 kW Weight: approx. 240 kg Extraction port diameter: 2x 120 mm Location: Nattheim Ncsdpfx Aoyapvteb Isl

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Condition: as new Features and technical specifications: - Total table length: 2720 mm - Infeed table length: 1498 mm - Maximum planing depth (joiner): 8 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence swivel range: 90 – 45° - Extraction port diameter: 120 mm - Drive motor power: 7 kW - Connection voltage: 400 V - Mains frequency: 50 Hz - Cutterhead type: TERSA - Cutterhead diameter: 120 mm Nsdpfxswka Txj Ab Ijcl - Number of knives: 4 pcs - Cutterhead speed: 5000 rpm - Maximum planing width: 520 mm Dimensions: 2,750 x 1,500 mm Weight approx. 720 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2022 Features and technical data: - Continuously tiltable sanding unit (0 - 90°) for vertical and horizontal sanding Nedjx Hbrzspfx Ab Iocl - Oscillating sanding belt for improved sanding results and longer belt life - Quick and easy sanding belt replacement via quick-release system - Sanding pad standard with graphite coating for increased belt longevity - Height-adjustable robust worktable made of cast iron with T-slot, supported by spring loading - Smooth table height adjustment via gas pressure springs - Includes side-mounted sanding drum device for sanding curves and radii - Includes infinitely adjustable mitre guide - Two extraction ports Ø 100 mm - Sanding drum device including three rubber rollers (Ø 38/50/76 mm), three sanding sleeves (sanding width: 100 mm), four table inserts, and height-adjustable table with extraction system - Table insert with slots for optimal dust extraction - Infinitely tiltable sanding unit from 0 - 90° - Lock-in positions at 0°/22.5°/45°/67.5°/90° - With rubberised sanding roller and graphite coating on the sanding pad - Standard with second emergency-stop switch on top of the sanding unit - Thanks to the continuously tiltable sanding unit, suitable for a wide range of sanding tasks, e.g., vertical and horizontal sanding - Sanding belt length: 2,270 mm - Sanding belt width: 150 mm - Belt speed: 16 m/s - Sanding surface length: 770 mm - Sanding surface width: 150 mm - Longitudinal table length: 680 mm - Longitudinal table width: 310 mm - Longitudinal table height adjustment: 130 mm - Cross table minimum height: 920 mm - Extraction port diameter: 100 / 100 mm - Mains voltage: 400 V - Phases: 3 Ph - Network frequency: 50 Hz - Power input: 2.1 kW - Fuse protection: 10 A Dimensions: 1350 x 585 x 1210 mm Weight: approx. 162 kg Availability: immediately Location: 63934 Röllbach

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Ncjdpfx Abjxnlave Isl

Condition: used, Year of construction: 2018, Nominal air flow: 5,089 m³/h Inlet nozzle: Ø 300 mm Negative pressure at nozzle: 2,434 Pa Filter cleaning: compressed air Chip collection volume: 3 x 165 liters Motor power: 7.5 kW | 400 V - 50 Hz / IE3 Sound pressure level: 71 dB(A) Max. compressed air connection: 6.0 bar Protection: 25 A Dimensions (LxWxH): 3,050 x 1,058 x 2,361 mm Weight (net): approx. 952 kg Stock location: Nattheim Nedpfx Ajxnlapjb Iocl

Condition: excellent (used), Year of construction: 2017, Holzkraft Bandsaw HBS 940 AS – Top Condition – Very Low Hours – DESCRIPTION - Heavy-duty design with high dead weight for maximum running smoothness - Especially quiet and precise operation thanks to a torsion-resistant machine frame - Cast iron flywheels with rubber coating and cleaning brush - 3-roller precision blade guides standard, above and below - Large grey cast iron saw table, tiltable from 0° to +15°, ground and polished surface - Large cast iron parallel fence with round bar guide, easily adjustable - Saw blade tension indicator - Precise cutting height adjustment via rack and pinion, with millimeter scale - Self-braking motor TECHNICAL DATA Dimensions and weight Length (product) approx. 1550 mm Width/depth (product) approx. 920 mm Height (product) approx. 2900 mm Weight (net) approx. 860 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Work table(s) Table length: 1250 mm Table width: 800 mm Table height: 1060 mm Table tilt: 0 - 20° Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 5.5 kW Cutting range Max. cutting height at 90°: 560 mm Max. cutting width: 910 mm Bandsaw blade Blade speed: 1550 m/min Nodpfx Ajxz Ulzob Iecl Flywheel diameter: 940 mm Blade length: 6690 mm Min. blade length: 6630 mm Max. blade length: 6700 mm Min. blade thickness: 0.8 mm Max. blade thickness: 0.9 mm Blade guide: precision guide above and below Location: ex-stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, cutting width (max.): 1,200 mm, cutting height (max.): 130 mm, saw blade diameter: 400 mm, cutting width at rip fence: 1,200 mm, type of input current: three-phase, input voltage: 400 V, main saw diameter: 400 mm, rotational speed (min.): 3,500 rpm, rotational speed (max.): 4,500 rpm, cutting length (max.): 1,250 mm, With a pivoting 400 mm saw blade With manual height and angle adjustment 130 mm cutting height Njdpfx Abjwa A E Ae Iecl Sample machine built in 2022

Condition: new, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, grinding belt width: 115 mm, CASADEI LIBRA 35/2 RTC 110 Standard Equipment Two-belt version with 1100 mm sanding width for the cost-conscious tradesman. The LIBRA 35 calibration and fine grinding machine is an extremely versatile and versatile machine. Robust tubular-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity. User-friendly thanks to the clearly laid-out control panel on the front. Motorized table height adjustment. Digital display for the working height. Electronically controlled sanding belt oscillation with reduced compressed air consumption. 1st unit: 120 mm diameter, slanted steel roller with fine adjustment for calibration. Pneumatic on/off of the roller. 2nd unit: Combination unit with finely adjustable working height for calibration and fine grinding: 120 mm diameter rubber-coated roller (45 Sh), hard sanding pad with graphite coating on a replaceable insert. Pneumatic roller on/off Electronic sanding pad, 56-sector spacing Electronic control system FOX 500 KTR Electronic working thickness adjustment Automatic carpet centering ✔ Automatic star-delta start-up for main motor Natural rubber feed carpet with negative profile Support table with two rollers at the inlet and outlet of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers in front of and behind each working unit Pneumatic belt tensioning for each unit with decimal adjustment of grit/belt thickness Length approx. 1650 mm Width/Depth approx. 1820 mm Height approx. 1960 mm Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 140 mm Electrical data Height adjustment motor power: 0.25 kW Feed motor power 0.33/0.55 kW Drive motor power 15 kW Connection voltage 400 V Line frequency 50 Hz Grinding unit Grinding belt length 1900 mm Grinding belt width 1115 mm Maximum sanding width 1100 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. height 4 mm Nodpfx Aewa Dbxob Iocl Max. height 170 mm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner coordinated with you.#####

Condition: new, functionality: fully functional, table length: 950 mm, table width: 450 mm, input voltage: 400 V, oscillation stroke: 15 mm, grinding belt length: 2,640 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, input frequency: 50 Hz, Sanding unit can be pivoted using a hand crank. The welded steel machine stand guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results. Oscillation can be optionally activated. Sanding base with graphite coating for a longer sanding belt service life. Height-adjustable sanding table utilizes the entire sanding belt width. Additional table with extraction openings for sanding radii on the rubberized guide roller. Sanding sleeve device with attachable work table. The spring-loaded belt tension automatically compensates for belt length differences. With adjustable stops, it is ideal for veneer sanding. Dimensions and Weights Length (product) approx. 1700 mm Width/Depth (product) approx. 1000 mm Height (product) approx. 1150 mm Net Weight approx. 300 kg Extraction Connection Number of Extraction Outlets 2 Extraction nozzle diameter 100mm Worktable(s) Worktable length 950mm Worktable width 450mm Worktable height adjustment 110mm Electrical Data Supply voltage 400V Mains frequency 50Hz Oscillation motor power 0.11kW Sanding unit: Sanding belt length 2640mm Sanding belt width 150mm Ncodpowg Ddasfx Ab Isl Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Sanding unit tilt 0-45° If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply specialist machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop technology. Contact us and we will tell you the nearest dealer.

Condition: new, Stürmer Maschinen GmbH is launching a new generation of Holzkraft band saws. With innovative technology and sophisticated design, the new FBS models set standards in precision and versatility. Thanks to their sliding carriage and outrigger, these band saws are ideal for cutting beams, blocks, and insulation materials. Whether in prefabricated housing, the packaging industry, or paper processing – these machines offer a reliable solution for a wide variety of applications. Each model is available in various versions and can be individually tailored to specific requirements. We will work with you to develop the optimal solution for your production processes. Interested? Let our experts advise you! Technical specifications: Particularly smooth and precise operation thanks to the torsion-resistant machine housing Solid cast flywheels and chip scraper Gray cast iron saw table with ground and polished surface Smooth-running aluminum sliding table with telescopic crosscut stop and folding stops Aluminum parallel stop with round bar guide, easy to move High operating comfort thanks to the mobile control panel that can be moved within the working radius Special saw blade guides at the top and bottom Saw blade tension indicator Integrated lubrication system with felt pads Precise cutting height adjustment via rack and pinion with millimeter scale Self-braking motor Automatic star-delta start Nedpewa Srfjfx Ab Iecl The photos show examples of the different models. Please contact us for your specific requirements. Sold through authorized retailers.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,270 mm, cutting width at rip fence: 1,270 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, height adjustment type: electric, overall weight: 1,000 kg, rotational speed (min.): 2,500 rpm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, input voltage: 400 V, power: 9 kW (12.24 HP), Equipment: scorer, Robust steel and grey cast iron construction • Standard with three speeds • Equipped as standard with NC control and 7-inch LCD display for setting all machine axes • Saw unit with permanently precise dual pivot segment guide, 6-year Holzkraft warranty on wear of pivot segments • Electrical positioning of cutting height and saw blade tilting • Scoring saw unit with separate scoring motor • Powerful industrial motors • Smooth-running and precise sliding table made of anodised aluminium with proven, permanently smooth ball contact system on hardened rails, 10-year warranty on wear of guide tracks • Large support surfaces thanks to standard table extension and width extension • Grey cast iron saw table • Folding parallel fence with fine adjustment and round bar guide • Crosscut fence, extendable to 3200 mm, with two flip stops and eccentric clamp • Particularly large outrigger with material roller, extendable to 2400 mm • Side-swivelling saw blade pendulum guard with integrated extraction port • Optionally available: mitre fences extendable up to 1500 mm for mounting directly on the sliding table • Numerous equipment options for individual customisation Ncodpfx Abewz Nzyo Ijl

Condition: new, total length: 1,700 mm, total width: 1,000 mm, total height: 1,500 mm, table length: 900 mm, table width: 360 mm, input voltage: 400 V, grinding belt length: 2,580 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, input frequency: 50 Hz, • Sanding unit can be swiveled using a handwheel • The welded steel machine base guarantees high torsional rigidity and vibration-free operation • Oscillating sanding belt with separate gear motor for better sanding results • Oscillation can be optionally activated • Sanding sole with graphite coating for a longer sanding belt service life • Height-adjustable sanding table utilizes the entire sanding belt width • Additional table with extraction openings for sanding radii on the rubberized guide roller • Sanding sleeve device with attachable work table • The spring-loaded belt tension automatically compensates for belt length differences Technical specifications: Dimensions and weights - Length (product) approx. 1700 mm - Width/depth (product) approx. 1000 mm - Height (product) approx. 1150 mm - Weight (net) approx. 250 kg Extraction connection: - Number of extraction nozzles: 2 - Extractor nozzle diameter 100mm Worktable: - Worktable length 900mm - Worktable width 360mm - Worktable height adjustment 110mm Electrical data: - Supply voltage 400V Ncjdewg Dy Iopfx Ab Iel - Mains frequency 50Hz - Oscillation motor power - Sanding unit power 0.11kW - Sanding belt length 2580mm - Sanding belt width 150mm - Belt rotation speed(s) 14m/s - Oscillation stroke 15mm - Sanding surface length 800mm - Sanding surface width 150mm - Sanding height max. 150mm - Sanding unit pivoting 0 – 90° Scope of delivery • 1x Sanding belt K100 • 5x Rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x Sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Onboard tool kit • Miter gauge If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop equipment. Contact us and we will tell you the nearest dealer.

Condition: new, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 140 mm, saw blade diameter: 400 mm, rotational speed (min.): 3,500 rpm, rotational speed (max.): 4,500 rpm, type of input current: three-phase, input voltage: 400 V, pivoting range: 45 °, Equipment: motor brake, scorer, Heavy-duty sliding table saw with scoring unit and motorized sawblade adjustment Technical Description Motorized sawblade tilt and height adjustment with digital display Belt-driven main sawblade with speeds of 3500/4500 rpm Heavy-duty weight ensures vibration-free operation Large outrigger table with material roller Parallel stop with round bar guide and digital position display Extendable aluminum longitudinal stop with two folding stops 7.5 kW main motor mounted on a robust cast iron frame Four-bearing sliding table made of anodized aluminum with high torsional rigidity Standard table extension and table extension made of heavy-duty sheet metal Ncjdpfxswa I Upo Ab Ijl Large pendulum guard can be easily raised using a gas spring Quick and convenient sawblade changes thanks to the Rapid clamping system Multiple locking mechanisms on the sliding table Dimensions and Weights Length approx. 3386 mm Width/Depth approx. 3600 mm Height approx. 1310 mm Weight approx. 850 kg Extraction connection Extraction nozzle diameter 120 mm Extraction nozzle diameter of saw blade guard 80 mm Electrical data Power consumption 7.5 kW Connection voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level 96.5 dB(A) Circular saw unit Cutting width with parallel stop 1300 mm Max. cutting width to the left of the saw blade 3200 mm Saw blade inclination 90 – 45 ° Max. cutting height 90° 140 mm Max. cutting height 45° 100 mm Saw blade diameter 400 mm Saw blade speed 3500/4500 rpm Sliding carriage and table Sliding carriage length 3200 mm Sliding carriage width 416 mm Sliding carriage height 890 mm Table length 1008 mm Table width 554 mm Table height 885 mm Scoring unit Scoring saw blade diameter min. 120 mm Scoring saw blade diameter max. 125 mm Scoring saw blade speed 8000 rpm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner coordinated with you.#####

Condition: like new (used), functionality: fully functional, CNC drilling machine for precise single-part and series production Nedjwz Nuyepfx Ab Ijcl Drilling head with seven vertical, four horizontal spindles and a groove saw unit Equipment: Roller conveyor for workpiece infeed and outfeed Edge sensor Pressure-boosted Y-axis for processing hard materials Automatic lubrication Machine operator interface software Maestro CNC Qwerty keyboard for convenient data input

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 17456, cutting length (max.): 3,200 mm, cutting width (max.): 1,270 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, overall weight: 1,000 kg, pivoting range: 45 °, power: 7 kW (9.52 HP), Equipment: motor brake, scorer, New machine built in 2021, serial number: Stable steel and gray cast iron construction With three speeds as standard With NC control with 7 inch LC display as standard for adjusting all axes of the machine Saw unit with permanently precise double swivel segment guide, 6-year Holzkraft guarantee on wear of the swivel segments Ncedpfxovxvbpo Ab Iel Positioning of the cutting height and the saw blade swivel electrically Scoring unit with separate scoring motor Powerful industrial motors Smooth and precise format sliding carriage made of anodized aluminum with proven and permanently smooth ball contact system on hardened, 10-year guarantee on wear of the guideways Large support surfaces thanks to standard table extension and widening Gray cast iron saw table Fold-down parallel stop with fine adjustment and round bar guide Crosscut stop, extendable up to 3200 mm, with two folding stops and eccentric clamp Particularly large boom with material roll, extendable up to 2400 mm Saw blade pendulum guard that can be swung away to the side with integrated suction nozzle Optionally available: mitre stops that extend up to 1500 mm for attachment directly to the sliding carriage Numerous equipment options for individual adaptation