Used Hurco Vmx 60 Srti for sale (67)

Condition: used, Year of construction: 2014, operating hours: 19,500 h, Functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, torque: 118 Nm, controller manufacturer: Hurco, controller model: WinMax, total height: 3,298 mm, total length: 3,921 mm, total width: 5,662 mm, table width: 660 mm, table length: 1,676 mm, table load: 1,360 kg, rotary table diameter: 600 mm, overall weight: 10,900 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 19,500 h, coolant supply: 40 bar, distance table to spindle center: 622 mm, spindle motor power: 36,500 W, Equipment: chip conveyor, Hurco VMX60SRTi 5-axis machining centre Year of manufacture: 2014 Very good condition Fjlswtnmfshcdw Iepi WinMax with extensive software options including 5-axis simultaneous machining, UltiMotion, NC-Mix, advanced 3D options, and more... Tool magazine with 40 tools, SK40, 40 bar through-spindle coolant Including Zero Clamp zero-point clamping system

Condition: ready for operation (used), Year of construction: 2018, operating hours: 2,195 h, General Data Measurements width 3767 Measurements depth 4954 Measurements height 3187 Machine weight 8400 Control Unit Brand HURCO Main Drive Spindle speed range 12000 / optional 16000 Spindle motor power 36.5 kw Tool taper SK40 Movement X-Axis Movement 1067 mm X-Axis Rapid Traverse 38 m/min Y-Axis Movement 610 mm Y-Axis Rapid Traverse 38 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 32 m/min B-Axis Movement +/- 90º B-Axis Rapid Traverse 50 rpm C-Axis Movement 360º C-Axis Rapid Traverse 100 rpm Table Tslots size 5 x 18 x 100 Min distance between vertical spindle and table 9 mm Max distance between vertical spindle and table 619 mm Table load 1360 kg Fpslhewwm R Recdw Iji Tools Slots in storage 40 Max weight 7 kg Max tool diameter 75 mm Max tool length 250 mm Media Chip conveyor Yes Additional Equipment Coolant capacity (l): 314 Equipped with: Renishaw calibration, through-spindle cooling, linear scales This 5-axis Hurco VMX 42 SRTi was manufactured in 2018. A universal machining centre, it offers advanced capabilities for complex and precise machining tasks. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 42 SRTi machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2016, Technical details are shown on picture. Parts shown by hand not come. Machine was produced 2016. (first time installed 2018.) Fslhsv Up Iuocdw Ijpi

Condition: used, Year of construction: 2010, Milling machines Travel distance X: 760 mm Travel distanceY :510 mm Travel distance z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Hurco WinMax spindle chuck: SK - A40 spindle revolutions: 12000 rpm table size X: 1020 mm table size Y: 508 mm max. workpiece weight: 1350 kg tool changer: 24 - time input Power : 13,5 kW Torque: 214 Nm Folhjv D U Apscdw Ispi Rapid traverse: 35 m/min spindle cooling chip conveyor

Year of construction: 2001, Condition: used, Price: On request CNC milling machine machining centre Model: 3-Axes Fslhcdownhfwew Iepi Manufacturer: Hurco Type: VMX 30 Control: Ultimax 4 Year of construction: 2001 Travel: 780x510x610mm Travel speed: 7,600mm/min Clamping table: 1020x510mm Max. workpiece weight: 1000kg Tool holder: 24 pieces Spindle speed: 10,000 rpm Spindle mounting: ISO 40 Spindle power: 11kw Machine weight: 4700kg Machine dimensions: 3870x4170x2775mm - Year: 2001 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2005, operating hours: 82,000 h, feed length X-axis: 1,270 mm, feed length Y-axis: 660 mm, feed length Z-axis: 610 mm, table width: 66 mm, table length: 149 mm, table load: 1,335 kg, overall weight: 9,000 kg, spindle speed (max.): 10,000 rpm, - vertical machining center -second hand- - HURCO - VMX 50/40T - yom 2005 - conrol: ULTIMAX 4 - linear guideways - working range: X x Y x Z = 1270 x 660 x 610mm - spindle speed upto 10.000 rpm - ATC 40 - Internal coolant system - 20bar - chip convoyer - 5 vices - app. 100 pieces of toolholder (see photo) Fpelhcelq E A Hodw Isi - dimensions L x W x H = 3,1 x 2,5 x 2,7m - weight: app. 9500kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: M442-01215051AFA, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HURCO, controller model: ULTIMAX, total height: 2,700 mm, total length: 3,500 mm, total width: 2,000 mm, table width: 510 mm, table length: 1,200 mm, rotational speed (max.): 10,000 rpm, overall weight: 7,000 kg, number of slots in tool magazine: 24, tool mount: 40 mm, Equipment: documentation/manual, rotational speed infinitely variable, - Including transport locks, various spindles, one pump, IKZ (internal coolant supply) Fslhswxngiocdw Iepi - Note: The machine vices located on the clamping surface are not included in the scope of delivery - Internal reference: 1

Condition: good (used), Year of construction: 2018, operating hours: 2,630 h, Functionality: fully functional, Equipment: chip conveyor, For sale is a HURCO 5-axis machining center, model VMX 30Ui (year of manufacture: 2018), with the following equipment: - Adaptipath trochoidal milling for higher cutting performance - Simulation graphics - Tool and material library - Pocket milling with islands - Synchronous thread cutting - 40-position tool changer - Direct measuring system for X, Y, Z, A, C axes - 4th and 5th axis - Spindle cooler - Chip conveyor - High-pressure cooling system, etc. Feloww Hh Aehcdw Iepi

Condition: good (used), Year of construction: 2002, Functionality: fully functional, We sell two identical pieces Hurco VMX24, Ultimax 4, Year 2002. Fpjlhcdwowh Umuj Iji

Condition: used, Year of construction: 2011, operating hours: 37,463 h, Functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table width: 1,000 mm, table length: 510 mm, spindle speed (max.): 15,000 rpm, Hurco VMX 30 T CNC machining center with additional 4th CNC rotary axis Year of manufacture 2011 Serial No. M34216027081EHC Fpslewgbfushcdw Ioi Frame No. H-30688 Hurco Winmax control system Table size 1,000 x 510 mm 3 axes, X/Y/Z travel 750 x 510 x 510 + 4th rotary axis Max. table load 1,350 kg Max. spindle speed 15,000 rpm Tool holder SK 40, 24-station tool changer, coolant system, chip conveyor

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: WinMax 5, table width: 610 mm, table length: 1,270 mm, table load: 1,750 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: SK40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, Additional equipment: Internal / external air Scraper belt conveyor The machine is available immediately. Fslewwq D Ijhcdw Ijpi Clamping devices and tools are not included in the scope of delivery. These are optionally available. Kennametall shrink-fit device and Zoller presetting unit are also optionally available.

Condition: good (used), Year of construction: 2006, Functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, with 4th (+20° / -116°) and 5th axis (360°) with SK50 mount with tailstock IKZ 40bar Fpelhcjwp Rhksdw Iei

Condition: used, _____ Description: Year of manuf. : 2022 Control : Hurco MAX 5 Speed : 15000 rpm Movement X/Y/Z : 610/508/610 mm In General: Year of construction:2022 Fpelhcswvn I Ujdw Ioi Control system:Hurco MAX 5 Travel X/Y/Z:610/508/610 mm Speed:15,000 rpm Automation:RoboJob Mill-Assist Spindle Technology:Inline-direct drive Speed:15,000 rpm Tool holder:SK 40 BIG-PLUS Working table: Clamping surface:760 x 510 Max. table load:1,500 kg Tool magazin: Technology:Turret magazine Tool changer:Double gripper Number of stations:30 Tool diameter max.:80 (130) mm Tool length max.:300 mm Automation: Technology:6-axis industrial robot Year of manufacture:2023 Manufacturer:RoboJob Type:Mill-Assist Robot:Fanuc M20 Control system:12" touchscreen + device interface Gripping system I:2HD Fix Mill + 2x PZV 125 Gripping system II:Smart 125 + RoboJob vacuum Clamping pressure control:Manuel Part clamping:TRIAG pneumatic vice Equipment: Chip removal:Chip conveyor Coolant supply:Internal coolant system with filter Tool measurement:Renishaw RTS Workpiece measurement:Renishaw OMP 60 Automation:RoboJob Mill-Assist Set-up operation:Electronic handwheel

Condition: excellent (used), Hurco VMX64 / 40T Serial No. M64406503066FHA Year of manufacture 2006 Folhjwcxcvjcdw Ijpi Spindle hours approx. 4200h Power-on hours approx. 5900h !!! Control system upgraded to WINMAX (software version 2016, 09.01.393.53)!!! DXF option and network connection Travel paths: X 1625 mm Y 860 mm Z 760 mm Table clamping area: 1675 x 890 mm Table load: 2500 kg Power 15.0 kW Max. torque 237 Nm Spindle to table distance: 150 - 910 mm Weight 15,000 kg Dimensions (W x D x H) 6340 x 4400 x 3150 mm Equipment: - BigPlus spindle with 10,000 rpm - KNOLL belt filter system - 20 bar internal coolant supply - 40-position tool magazine (hydraulic chain magazine) - SK40 spindle - Chip conveyor - 5 ATORN NC hydraulic vises (125 mm) - Heidenhain Measuring probe The machine is in very good condition and ready for immediate use. All backlashes have been adjusted, so it is geometrically very good. The control system has been upgraded to WINMAX. Price net, ex works, ex works

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 1,270 mm, rapid traverse Y-axis: 610 m/min, rapid traverse Z-axis: 660 m/min, ultimax 4 control spindle 40 speeds 8000 rpm strokes 1270X610X660MM weight 9500KGS Fpslornt Emohcdw Iji chip evacuator

Condition: used, Year of construction: 2007, TECHNICAL DATA Travel X 760 mm Travel Y 510 mm Travel Z 610 mm Table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm Distance spindle to table min./max. 150/762 mm Felewud Afehcdw Iopi Spindle taper steep taper DIN 69871 ISO 40 Spindle speeds 10–10000 rpm Drive power (30 min/continuous duty) 11 kW Max. torque 236 Nm Constant power from 500 rpm Coolant tank 190 l Linear guides with ball bearings in X, Y, Z axes Rapid traverse X/Y/Z 30 / 30 / 20 m/min Feedrates programmable 3.0–7600 mm/min Positioning accuracy ±0.01 mm Repeatability ±0.005 mm Automatic tool changer (double-arm) 24 positions Internal cooling Chip conveyor

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Fslhok Iugzjcdw Iopi

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: M442-06203104DFA, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-axis: 1,060 mm Y-axis: 610 mm Z-axis: 610 mm Rapid traverse (X/Y/Z): 30 m/min Distance table surface – spindle nose: 150 – 760 mm Speed range: 10,000 rpm Spindle motor: 15 kW Tool holder: SK 40 Tool changer: 24 positions Table size: 1,300 x 630 mm Fpjlhcdwjwrr Nzj Iji Max. table load: 1,100 kg MACHINE DETAILS Connected load: 24 kW Required space (LxWxH): 4.9 x 3.8 x 2.75 m Machine weight: 6,500 kg EQUIPMENT - Chip conveyor - NC rotary tilt table - No internal cooling (IKZ)

Condition: good (used), Year of construction: 2001, Functionality: fully functional, spindle speed (max.): 10,000 rpm, power: 15 kW (20.39 HP), Equipment: documentation/manual, rotational speed infinitely variable, - 5-Axis Vertical Machining Center - second-hand - HURCO - VMX 40 - with LEHMANN 2-axis dividing head - DRM 160mm, holder SK 50 - 24-fold tool changer - Control ULTIMAX 4 (64MB memory with all extensions, 5-axis simultaneous possible) - Ethernet interface - Zero-point clamping system - Coolant system (without chip conveyor, no IKZ) Fpolhcdeq Sr Hujw Iei

Condition: used, Year of construction: 2006, Functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Ultimax, total height: 2,800 mm, total length: 2,200 mm, total width: 2,400 mm, table width: 610 mm, table length: 1,270 mm, spindle motor power: 18,000 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, 3 axes Tool holder SK 40 Internal coolant 35 kVA Fpelhcewtdzrodw Ioi approx. 7550 kg Comprehensive tool package available separately

Condition: ready for operation (used), Year of construction: 2003, Travel X/Y/Z: 610mm/508mm/610mm, rapid traverse X/Y/Z: 35m/35m/30m, feed: 7600mm/min, table dimensions X/Y: 760mm/510mm, max. table load: 700kg, tool holder: SK40, tool positions: 24, spindle speed: 10000rpm, power: 7.5kW. Machine dimensions X/Y/Z: approx. 2200mm/2400mm/2500mm, weight: approx. 5000kg, control: Ultimax 4, documentation available. On-site inspection is possible. Fslowpu Ihohcdw Ispi

Condition: excellent (used), Year of construction: 2015, Control Winmax Travel paths X/Y/Z 2135 x 865 x 762 mm Spindle speed 12,000 rpm Tool magazine for 40 tools, SK 40 Felhcswpyavjdw Ispi Handwheel Ultimotion ICS 40 bar Renishaw probe Chip conveyor

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, High-stability machining center also suitable for rough milling. The control system offers both plain text and ISO programming. Technical specifications: Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm Drive power: 30 kW Speed: 15,000 rpm Spindle mount: SK 40 Type B Feed rate: up to 23 m/min Worktable: Dimensions 1,500 mm x 660 mm Max. workpiece weight 1,300 kg Fpjljvrq Azehcdw Iei Control: Hurco Ultimax 4, including software for milling simulation Electronic handheld control panel RS 232C / V24 interfaces Two screens for text and graphics editing Two software units for plain text and ISO programming Machine design: High stability, also suitable for roughing Tool changer: Double-arm gripper with 24 stations Equipment: Cooling unit for milling spindle Internal coolant supply (IKZ) 20 bar Flushing system for chip removal Splash guard booth Coolant system with coolant filtration Chip conveyor Machine data: Space requirement (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm Weight approx. 9,000 kg Connected load: 50 kVA, 400 V, 50/60 Hz The machining center is fully functional. A live inspection is available by appointment. All tools and consumables shown in the photos are not included in the scope of delivery. Subject to technical changes and errors.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,947 h, Additional Equipment High-pressure cooling system for through-spindle coolant supply / Coolant type: Emulsion / Coolant pressure: 20 bar / Cooling air can be switched via coolant nozzles / Bypass filter system for internal cooling option Lift pump for main coolant tank / Gravity belt filter with filter capacity: Max 70 liters/min / Additional coolant tank: 280 liters This 3-axis Hurco VMX 42i was manufactured in 2014, featuring a 40-station tool changer and a high-pressure cooling system with a 280-liter additional coolant tank. It includes an integrated hydraulic tool clamping system and a bypass filter system for internal cooling. The machine also boasts a 4th axis NC rotary axis and a 5th axis swiveling positioning axis. Consider the opportunity to buy this Hurco VMX 42i vertical machining center. Contact us for more information. Application Types Milling Fpslhcdwswkxdpj Ioi

Condition: used, Year of construction: 2000, Technical details: x-travel: 1020 mm y-travel: 510 mm z-travel: 610 mm control: ULTIMAX 4 table surface area: 1.220 x 510 mm table load capacity: 750 kg tool change unit: 24 Pos. turning speeds: 10.000 1/min tool taper: SK 40 spindle: 15 kW chip conveyor electric handwheel Fpjlhcdwsv I A D Ao Iji DXF - Import possible working hours on mech hour meter 9651 h *