Used Hurco Tmx 10 Mysi for sale (160)

Condition: reconditioned (used), Year of construction: 2015, CNC lathe HURCO TMX 10 MYSi With HURCO MAX control Year of construction: 2015 Turning diameter over bed: 560 mm Travel in X: 220 mm Travel in Z: 670 mm Travel distance W axis: 740 mm Travel distance Y axis: + /- 55 mm Spindle bore: 77 mm Speed range: 20 - 3500 rpm With the following accessories: Sliding guard with interior lighting 12-slot turret with 12 driven stations (VDI 40) Various VDI 40 tool holders Various driven tools VDI 40 Tool measuring device Electronic handwheel Parts pick-up device Y axis + / - 55 mm Counter spindle 6000 rpm with jaw chuck Kitagawa 0 200 mm 3 jaw chucks Hydraulic 0 250 mm with foot switch Chip conveyor Oil mist extraction Status light Coolant device Pgjlhetppkbjccqnsk Operating instructions

Year of construction: 2023, Condition: ready for operation (used), General Data Machine weight 7700 kg Control Unit Brand HURCO Main Drive Number of axis 4 Movement X-Axis Movement 222.5 mm X-Axis Rapid Traverse 24 m/minute Y-Axis Movement +/- 55 mm Y-Axis Rapid Traverse 30 m/minute Z-Axis Movement 670 mm Z-Axis Rapid Traverse 12 m/minute W-Axis Movement 740 mm W-Axis Rapid Traverse 30 m/minute Turret Tool taper VDI40 DIN1809 Tools Number of station 12 Additional Equipment Pgolov Rr Tlehccqnok Voltage Required / Fuse rating: 3-phase 380V/415V 50 Hz/125 amp D rated MCCB Power Rating / Full Load KVA: 68.6 KVA Air Requirements: 5 CFM 80-100 PSI / 0.14 M3/min. 6-8 bar / 0.1 connected via a 12 mm nylon push fit This 4-axis Hurco TMX10-MYSi horizontal turning machine was manufactured in 2023. Ideal for precision machining, it offers advanced multi-tasking capabilities. Consider the opportunity to buy this Hurco TMX10-MYSi horizontal turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2011, 450mm maximum cutting diameter, 720mm max turned length, 3,000rpm spindle speed, 78mm bar capacity, Pjlsumkgfehccqnegk 12 station block turret, 30Hp spindle motor, 250mm 3 jaw chuck, Hurco MAX Control, tailstock, parts catcher.

Condition: excellent (used), Year of construction: 2014, The machine is in good technical condition, testing possible after prior agreement. Spindle operating hours: 3500 - X-axis travel 660 mm - Y-axis travel 406 mm - Z-axis travel 508 mm - table clamping surface 762x406 mm Pgslhcjwgaq Njcqnjk

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: S10-1622378FKBCH, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table Table length: 762 mm Table width: 406 mm Table load: 682 kg Table clamping area (L × W): 762 × 406 mm T-slots (DIN 650): 3 × 18 H8 × 100 mm Distance spindle nose to table: 102 – 610 mm Spindle Max. spindle speed: 12,000 rpm Spindle power: max. 11 kW Spindle torque: max. 61 Nm Tool holder: 40 mm Speed control: infinitely variable Feed and rapid traverse Rapid traverse X-axis: 24 m/min Pslhccowd Nwyjqnogk Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Tool magazine Magazine positions: 20 Tool holders (SK40): not included Tool diameter: 89 mm Tool length: 250 mm Tool weight: 7 kg Accuracy Positioning accuracy (Pmax.): 0.01 mm Repeat accuracy (Ps): 0.005 mm Control system Control system manufacturer: HURCO MACHINE DETAILS Connected load: 15 kVA Operating voltage: 400 V, 50 Hz Weight: 2.85 t Footprint without internal cooling: 3.4 x 3.2 m Machine dimensions: 2.1 x 1.8 x 2.6 m Transport dimensions: 1.96 x 2.3 x 2.39 m EQUIPMENT - Continuously variable speed Adjustable - Digital technical documentation can be accessed via the control system - Without mounted machine vices and the tool holder and tool mounted in the spindle

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, Hurco VM10 Vertical Machining Center 2011 model year Still in operation Pjlhccswcqu Roqnjgk Visible under power, video available

Condition: excellent (used), Year of construction: 2016, operating hours: 4,900 h, Hurco machining center VM 10 i Working range Spindle nose - table (mm) 102 - 610 Table - clamping surface L x W (mm) 762 x 406 T-slots (DIN 650) 3 x 18 H8 x 100 Table load (uniform) (kg) 1500 Travel X-axis (mm) 660 Pgjlhccetryq Ssqnok Y-axis (mm) 406 Z-axis (mm) 508 Main spindle Spindle cone (DIN 69871 A) SK40 Spindle speed max. (rpm) 10,000 Spindle power max. (kW) 11 Spindle torque max. (Nm) 74 Feed rate Rapid traverse X-axis / Y-axis / Z-axis (m/min) 28 / 28 / 28 Tool changer Magazine positions / optional 24 Tool diameter max. (mm) 80 Tool length max. (mm) 250 Tool weight max. (kg) 7 Further data Required floor space (mm) (doors open, incl. control and chip conveyor) 3,264 x 2,930 x 2,564 Weight of the machine (kg) 2,850 Coolant tank capacity (l) 62 Screw conveyor Optional Technical data may be subject to change without notice.

Condition: as good as new (ex-display), Year of construction: 2023, Control : Sonstige Hurco Max 5 Pgslhccqelf E Aienek Spindle Speed : 12,000 U/min Power : 11 kW Holder : SK 40 Torque : 61 Nm In general Travel X : 660 mm Travel Y : 406 mm Travel Z : 508 mm Rapid traverse X/Y/Z: 28 m/min Table : 762 x 406 mm Table load : 1,500 kg

Condition: used, Year of construction: 2014, turning diameter over bed 0508 mm turning length 724,5 mm control Ultimax Hurco turning diameter over bed slide 336 mm spindle turning speed - stepless 0- 4500 U/min- rpm spindle bore 65 mm feeds 0-30 m/min Pgolhcov T Np Aocqnsk rapid power traverse in X-and Z direction 30 m/min voltage 400 V connected load 30 KVA face slide travel 203,2 mm longitudinal travel 580/640 mm dimensions of the machine ca. 4,3 x 2,1 x 2,6 m toolpiece turning speed range 0- 5000 U/min work piece power 5,5 kW main drive motor 15/22 kW weight of the machine ca. 5,6 t c-axis 360 x 0,001 ° With 12 position turret head with live tooling (C- axe), sub spindle, power chuck, cooling arrangement and chip conveyor. Control: Hurco Ultimax. With many accessories.

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2050 mm Measurements depth 4261 mm Measurements height 2597 mm Pgjlhev Ap Hysccqnek Machine weight 8000 kg Main Drive Number of spindles 2 Spindle speed range 4500 rpm / 5000 rpm Number of axis 4 Movement X-Axis Movement 203.2 mm Z-Axis Movement 560 mm W-Axis Movement 640 mm Workpiece Workpiece drm over bed 508 mm Workpiece drm over support 508 mm Workpiece drm 336 mm Table Distance between 724.5 mm This 4-axis Hurco TMX 8MYS lathe was manufactured in 2013. It features a maximum turning diameter of 336mm and a swing over bed of 508mm. The distance between centers is 724.5mm, and it includes live tools with 12 positions in the turret. Ideal for precision machining, the Hurco TMX 8MYS machine we have for sale offers robust performance and versatility. Contact us for further details regarding this lathe. Application Types Turning

Condition: used, Year of construction: 2014, operating hours: 4,900 h, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 455 mm, overall weight: 3,500 kg, spindle speed (max.): 12,000 rpm, Hurco VMX10i for sale in good, well-maintained condition. Was used 80% for machining aluminum. The machine can be inspected under power at any time. Model: VM10i No. H-V1E1585 Year of manufacture 09/2014 Serial number M10-1622194DAAAH Weight approx. 3000 kg Pgslswdnymohccqnjk 12,000 rpm 14-way tool change Loaded by forklift. Vices not included. Please contact us if you have any questions.

Condition: good (used), Traverses X Y Z: 660mm x 355mm x 457mm, table size 762mm x 356mm, Pelhccjvygxueqnegk maximum table load 340Kgs 10000rpm spindle, 20 station ATC, DIN40 spindle taper, spindle power 11Kw, Hurco WINMAX control, coolant, 4th axis rotary table.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE Pgelhccqsuhbubenjk - Tool holder type : BT40 - Spindle power : 8.9 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 533 x 406 483 [mm] - Rapid traverses rates (X/Y/Z) : 24 [m/min] - Distance table / spindle nose (min./max.) : 36-519 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 TABLE - Table dimensions : 198 [mm] - Maximum weight upon table : 150 [kg] * Distance table / spindle nose (min./max.) : 36-519 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2994 x 2666 mm [mm] - Machine height : 2669 [mm] - Machine weight : 3360 [kg] MACHINE HOURS - Number of working hours : 22000 [h] EQUIPMENT - CNC : HURCO WINMAX V09.01.393.24 - Rigid tapping - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : HURCO * travel 4th axis : -30 / +110 [°] * indexing precision 4th axis : 0,001 [°] * travel 5th axis : 360 [°] * indexing precision 5th axis : 0,001 [°] - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Chip auger - Tool probe : Renishaw NCRTX/RX

Condition: used, Year of construction: 2014, Used 2014 Hurco VM10i with Winmax control, with 10,000 RPM spindle, rigid tapping & helical ramp options. Control options TBC. In immaculate condition! X Axis 660 mm Y Axis 406 mm Z-Axis 508 mm Control WINMAX (V09.01.121) Table Size 762 x 406 mm Taper SK/BT40 ATC positions 24 Spindle Power 11 kW Spindle torque 74 Nm MAX RPM 10000 rpm Feed rate 24000 mm/min Rapid Trav 28 m/min Machine weight approx. 2850 kg Machine Size 1800x1300x2400 mm Polhcovkwh Uecqnjgk Control: Hurco Winmax Spec: Travel X660 Y406 mm Z508 mm | 10000RPM | CAT40 Accessories: 10,000 RPM spindle, rigid tapping & helical ramp options

Condition: good (used), Hurco VM10 Vertical Machining Centre with 4.axis rotary table Year: 2010 - Control Hurco Winmax - Maximum workpiece weight 340kg - Table Size 762 x 404mm Pgslhccstrmq Tjqnek - Traverses XYZ 660 x 405 x 457mm - Rapid Feedrates XYZ: 24 x 24 x 19m/min - Spindle Motor Power 11kW - Spindle Speed 10000rpm - Tool Change Capacity 20 Station - Tool Change Time (Chip to Chip) 3 seconds - Tool Size BT40 - Machine Dimensions 1800 x 1600mm - Machine Weight 2818kg Accessories/options: software options as per pictures 4.axis rotary table and tailstock swarf conveyor through spindle coolant coolant tank documentations Under power in our warehouse!

Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: H-H40611, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 24, Big Plus spindle recently replaced + internal coolant supply TECHNICAL DETAILS Travel X / Y / Z: 1067 / 610 / 610 mm Spindle speeds: 12,000 rpm Rapid traverse X, Y, and Z: 30 m/min Power: more than 15 kW Tool changer: 24 positions, ISO 40 Control: WinMax Ultimax 4 Pgjlhccjwc R Dxsqnok Table: 1270 x 610 mm Table load: max. 1350 kg EQUIPMENT - Chip conveyor - Oil cooler - Electronic handwheel - Internal coolant supply

Condition: excellent (used), Year of construction: 2014, VMX42Mi 4th Axis Travels & Capacity X, Y, Z Axis Travel 1,067 x 610 x 610 mm Max. Weight on Table 3,850 lb (1,750 kg) Pgjlsvxifnohccqnek Table Size 1,270 x 610 mm Max. Spindle Speed 10,000 rpm Tool Changer Tool Type 40 Max. Operating Floor Space (3,864 x 3,719 mm) Machine Height 114.8 in (2,917 mm) Machine Weight 14,872 lb (6,760 kg)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 2,195 h, General Data Measurements width 3767 Measurements depth 4954 Measurements height 3187 Machine weight 8400 Control Unit Brand HURCO Main Drive Spindle speed range 12000 / optional 16000 Spindle motor power 36.5 kw Tool taper SK40 Movement Pslhcsv Dyndocqnjgk X-Axis Movement 1067 mm X-Axis Rapid Traverse 38 m/min Y-Axis Movement 610 mm Y-Axis Rapid Traverse 38 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 32 m/min B-Axis Movement +/- 90º B-Axis Rapid Traverse 50 rpm C-Axis Movement 360º C-Axis Rapid Traverse 100 rpm Table Tslots size 5 x 18 x 100 Min distance between vertical spindle and table 9 mm Max distance between vertical spindle and table 619 mm Table load 1360 kg Tools Slots in storage 40 Max weight 7 kg Max tool diameter 75 mm Max tool length 250 mm Media Chip conveyor Yes Additional Equipment Coolant capacity (l): 314 Equipped with: Renishaw calibration, through-spindle cooling, linear scales This 5-axis Hurco VMX 42 SRTi was manufactured in 2018. A universal machining centre, it offers advanced capabilities for complex and precise machining tasks. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 42 SRTi machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2011, operating hours: 37,463 h, Functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table width: 1,000 mm, table length: 510 mm, spindle speed (max.): 15,000 rpm, Hurco VMX 30 T CNC machining center with additional 4th CNC rotary axis Year of manufacture 2011 Serial No. M34216027081EHC Frame No. H-30688 Hurco Winmax control system Table size 1,000 x 510 mm 3 axes, X/Y/Z travel 750 x 510 x 510 + 4th rotary axis Max. table load 1,350 kg Max. spindle speed 15,000 rpm Pgelhcjwgbfuscqnjk Tool holder SK 40, 24-station tool changer, coolant system, chip conveyor

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, Equipment: chip conveyor, Vertical Machining Centre Hurco VMX42t Year 2007/2008 Hurco Ultimax control with 2 x screens Travels: X 1060 mm. Y 610 mm. Polhcjvt Sm Rjcqnogk Z 610 mm. Spindle: ISO 40. 18 kW. 12,000 rpm. 40 station tool changer Coolant tank Chip conveyor Optional package of tooling can be purchased. Very good condition. Only used for single part machining in special machine builder shop. Inspect under power - Immediately available ! Proposal Number MV-6436

Condition: used, Year of construction: 2004, Hurco VM2 Very good condition! Pgelhevxlvveccqnjk Table size: 1170 x 508 mm - Maximum table load: 544 kg - Movement in X/Y/Z: 1020 x 457 x 457 mm - Main spindle speed: 8000 rpm - Main spindle taper: SK40 - Main drive power: 15 kW - Weight: approx. 4100 kg - Dimensions: 2500 x 2200 x 2590 mm

Condition: excellent (used), HURCO VMX 24M VERTICAL MACHINING CENTRE FULLY INTERGRATED 4TH / 5 TH AXIS SIMULTANEOUS MILLING TABLE SIZE 760 X 510 MM YEAR 2010 WINMAX CONTROL 24 ATC THE 5TH AXIS UNIT CAN BE REMOVED FROM THE MACHINE IF NOT REQUIRED Peljwaay Dshccqnegk EVERYTHING RUNNING AND WORKING AS IT SHOULD

Condition: ready for operation (used), Year of construction: 2001, Control Unit Brand HURCO Model Ultimax 4 CNC Main Drive Spindle speed range 10000 rpm Pslsvy I Ukohccqnjgk Spindle motor power 15 kW Tool taper SK40 Movement X-Axis Movement 1020 Y-Axis Movement 510 Z-Axis Movement 610 Table Outer length 1220 mm Outer width 510 mm Table load 750 kg Additional Equipment Tool Changer: Automatic with 24 positions This 3-axis Hurco VMX40 vertical machining center was manufactured in 2001. Consider the opportunity to buy this Hurco VMX40 vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, Control Unit Main Drive Pelhccqsviy Hkenogk Spindle speed range 10000 Tool taper SK40 Number of axis 3 Media Chip conveyor Yes Additional Equipment Electric handwheel This Hurco VMX 40 vertical machining center was manufactured in 2000. It features a 10,000 rpm speed, an Ultimax 4 control unit, SK40 tool holder, a 24-position tool changer, and a chip conveyor. Ideal for precision machining, the Hurco VMX 40 machine we have for sale represents a valuable addition to any workshop. Contact us for further details. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,440 h, Main Drive Spindle speed range 10 - 10000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 660 mm Y-Axis Movement 356 mm Z-Axis Movement 456 mm Table Outer length 762 mm Outer width 356 mm This 3-axis Hurco VM1 vertical machining center was manufactured in 2008. It features a WinMax Mill control system, a spindle speed range of 10-10,000 rpm, and a 20-fold tool changer. The machine has a table size of 762 x 356 mm and uses an SK40 spindle holder. If you are looking to get high-quality milling capabilities, consider the Hurco VM1 machine we have for sale. Contact us for more information. Application Types Pgelou Dcl Nshccqnok Milling