Used Hurco Vmx 42 I for sale (8)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,203 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table width: 610 mm, table length: 1,270 mm, table load: 1,750 kg, overall weight: 6,450 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018. It features an impressive X-axis travel of 1067 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1270 x 610 mm and a maximum table load of 1750 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42i vertical machining centre we have for sale. Contact us for further details. • Control system: WinMax 5 (Windows platform), control with electronic handwheel • Display: 2 x 19" LCD screens • Interfaces and storage: Ethernet, USB, SSD storage, 2 GB RAM • Tool magazine capacity: 30 • Max tool diameter: 80 mm • Max tool length: 300 mm • Software/NC functions: Adaptive trochoidal milling, Simulation graphics, Tool and material library, Rigid tapping, Synchronous threading, Extended NC mode (ISNC), Dynamic lookahead up to 10000 blocks, Optimized surface quality motion control, Reduced cycle times, Adjustable surface quality, Tool change optimization Itedpsy A Skgefx Apcof • Integrated hydraulic tool clamping system • Machine manual integrated in control • Electrical: AC 400 V, 3-phase; 50 Hz; Full load 28 kVA; Full load current 42 A; Largest motor 13 kVA / 18 A; Interrupt capacity 10000 A; Short circuit current 20 kA • Environmental: Max ambient temperature 35 °C • The spindle was measured by a Hurco specialist 2-3 weeks ago Additional equipment • Chip conveyor • Coolant system, incl. coolant emulsion system • High-pressure coolant system 20 bar • Coolant through spindle 20 bar • Air through coolant nozzles • Air through spindle • Coolant spray gun • Washdown system for chip removal • LED work light • Status signal lightAccessories on pictures are not included Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2014, Hurco VMX42i vertical machining center Year: 2014 Iodpfsyuc Nvex Apcjtf WinMax control Table clamping surface 1270 x 610 mm Table load 1750 kg Travels X-axis 1067 mm Y-axis 610 mm Z-axis 610 mm Tool holder SK 40 Spindle speed max 12000 rpm Spindle power max 18 KW Tool changer 30 times Tool diameter max 80/76 Tool length 300 mm Machine weight 6850 kg Coolant tank 484 liter Accessories/options: - Through spindle coolant - Tool holders - Documentations - Remote control - Swarf conveyor Under power in our warehouse!

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,317 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco Max 5, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,067 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Spindle speed (max.): 12,000 rpm Spindle power: 18 kW Spindle torque: 239 Nm MACHINE DETAILS Control model: Hurco Max 5 Weight: 7,100 kg Itjdsxrdxlepfx Apcof Operating Hours Spindle hours: 3,317 h Operating hours: 8,634 h EQUIPMENT 40-position automatic tool changer (ATC) Internal coolant supply 20 bar Renishaw probe OMP60 Renishaw laser Software package DXF Software package for tool measurement Software package for workpiece measurement Software package NC Conversational Merge Software package tool change optimization

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Itjdpfjw H Awrex Apcjf Number of axis: 3 milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 Ijdpfew H Awljx Apcjtf milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm

Condition: used, Year of construction: 2013, operating hours: 12,000 h, Hurco VMX42i WinMax control Table clamping surface 1270 x 610 mm Table load 1750 kg Travel X axis 1067 mm y-axis 610 mm z axis 610 mm Tool holder SK 40 Spindle speed max rpm 12000 Spindle power max 18 KW Ijdpfori N A Hex Apcjtf Tool changer 30 times Tool diameter max 80/76 Tool length 300 mm Machine weight 6850 kg Coolant tank 484 liter

Condition: ready for operation (used), Year of construction: 2019, Make: HURCO Iodpfxeyc Sn Re Apcstf Type of machine: VMX42i Year of manufacture: 2019 Control system: Hurco WinMax Tool holder: SK40 x-travel: 1.067 mm y-travel: 610 mm z-travel: 610 mm Speed range: 12.000 U/min max. Table load: 1.000 kg Table dimensions: 1.270 × 610 mm Number of tools in the magazine: 24

Condition: excellent (used), Year of construction: 2019, Winmax V10 X-axis: 1,067 mm Y-axis: 610 mm Z-axis: 610 mm Table size: 1,270 × 610 mm Tool holder: SK40 (DIN 69871) Max. speed: 12,000 rpm Drive power (S1/S6): approx. 15 / 22 kW ICS (internal coolant supply): 20 bar Separate coolant tank with paper band filter Rapid traverse X/Y/Z: 35 m/min (X/Y), 30 m/min (Z) Capacity: 40 tools Tool change time: tool-to-tool approx. 2 s Max. tool diameter: 80 mm (next to free slot: up to 125 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Iedpfewt N Tgsx Apcotf Machine weight: approx. 6,900 kg Required space (W × D × H): approx. 4,600 × 3,900 × 2,800 mm Spindle nose to table: 150 – 760 mm Table surface to floor: approx. 900 mm