Used Hyundai Generator for sale (171)

Condition: new, Year of construction: 2025, machine/vehicle number: 20241119012, fuel type: diesel, motor manufacturer: Hyundai P086TI, General information Field of application: Construction Weights Empty weight: 2.364 kg Functional Godpfx Ajxl N Raoa Iett Generator capacity: 220 kVA CE mark: yes Other information Fuel consumption: 31.7 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A44M Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 224 l Transport dimensions (LxWxH): 3,51x1,13x1,75 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: used, Year of construction: 2022, Technical details: Rated capacity: 13,5 kVA Godpsu Nvd Njfx Aa Istt Revolution per minute: 20 U / min capacity: 11 KW type of fuel: Diesel voltage: 230-250 V / Hz battery: 45 A/h motor power: 11 kw weight: 318 kg dimensions L x W x H: ca. 1,2 x 0,7 x 0,9 m 2 St. Soundproofed (Silent) Diesel engine: LA290F; 2-cylinder; 3,600 rpm; tank capacity 53 liters; Battery voltage 12V Generator: LDG12S-3; voltage 400V / 230V; 3.600 rpm; power: normal power 10kW max. power 11kW Power class G1 *

Condition: new, Year of construction: 2025, machine/vehicle number: 20250501001, fuel type: diesel, motor manufacturer: Hyundai P086TI-1, General information Field of application: Construction Gtodpfew Sc Dujx Aa Ist Weights Empty weight: 2.035 kg Functional Generator capacity: 165 kVA CE mark: yes Other information Fuel consumption: 26.7 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 185 l Transport dimensions (LxWxH): 3,308x1,13x1,8 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai P086TI-1 / Doosan P086TI-1

Condition: new, Year of construction: 2025, machine/vehicle number: 20250605009, fuel type: diesel, motor manufacturer: Hyundai DP222LC, General information Field of application: Construction Weights Empty weight: 6.185 kg Gjdpfoxivr Eox Aa Istt Functional Generator capacity: 825 kVA CE mark: yes Other information Fuel consumption: 119 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1090 l Transport dimensions (LxWxH): 4,808x1,95x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai DP222LC / Doosan DP222LC

Condition: new, Year of construction: 2025, machine/vehicle number: 20250405005, fuel type: diesel, motor manufacturer: Hyundai DP158LC, General information Field of application: Construction Weights Empty weight: 4.600 kg Functional Generator capacity: 510 kVA CE mark: yes Other information Fuel consumption: 72.9 Liter / Hour at 75% Load Generator: Leroy Somer TALA473B Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 775 l Transport dimensions (LxWxH): 4,008x1,8x2,35 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai DP158LC / Doosan DP158LC Gedpfxow Alure Aa Iett

Condition: new, Year of construction: 2025, machine/vehicle number: 20250320030, fuel type: diesel, motor manufacturer: Hyundai P126TI-II, General information Field of application: Construction Weights Empty weight: 3.254 kg Functional Generator capacity: 330 kVA Gjdpeuq U Smefx Aa Iett Other information Fuel consumption: 47 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A46F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 480 l Transport dimensions (LxWxH): 3,938x1,3x2,01 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai P126TI-II / Doosan P126TI-II

Condition: new, rated capacity 2,6/2,8 KW frequency 50 Hz output voltage 2 x 230AC / 1 x 12DC V tank capacity 15 l weight of the machine ca. 48 Kg dimensions of the machine ca. 700 x 500 x 600 mm Gedpfeu Imnvsx Aa Ijtt A quiet, powerful and reliable 3200 W generator. - Mobile thanks to two smooth-running wheels. - Durable and energy-efficient 4-stroke engine with eco function. - Ideal for traveling with a camper, caravan or tent. - Equipped with LED display, 230V and 12V DC output. - Automatic protection against overload and lack of fuel. - Only 35 kilograms (!). Easy to transport and store. - Noise level: very quiet; only 59 dB (A) at a distance of 7 m. - Fuel: Euro unleaded

Condition: new, rated capacity 3,0 KW rated current 16/8,3 Ampere output voltage 2 x 230AC / 1 x 12DC V tank capacity 12 l engine output 7,0 PS weight of the machine ca. 45 Kg dimensions of the machine ca. 0,68 x 0,58 x 0,54 m Exhibition machine!! The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) Gtsdpfx Aaeu Imf Us Ist reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine)

Condition: new, Year of construction: 2024, functionality: fully functional, HYUNDAI-WIA SE2200M CNC LATHE WITH FANUC 0IT PLUS CONTROL AND C-AXIS MACHINE CONSTRUCTION & FEATURES  8” STANDARD CHUCK SIZE.  30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HIGH PERFORMANCE ROLLER LM GUIDEWAYS.  12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION INCLUDED]  4,500 RPM HIGH POWER MAIN SPINDLE.  30 X 36 M/MIN RAPID TRAVERSE RATES - X & Z AXES.  C-AXIS MAIN SPINDLE.  ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. MACHINE CAPACITIES Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 390 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 288 MM Bar Capacity - Main Ø 65 MM MAIN SPINDLE Chuck Size 8” Ø 203 MM Spindle Bore Ø 75 MM Spindle Speed (Rpm) 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max.) 167 NM Spindle Type BELT Spindle Nose A2-6 C-Axis Indexing 360° (0.001°) FEED Travel X 210 MM Travel Z 340 MM Rapid Speed X 30 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDE TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP LIVE TOOL Motor (Max / Cont.) 2.75 / 1.85 KW Milling Tool Speed 6,000 RPM Torque (Max.) 26.2 NM Collet Size ER 20 - Ø 13 Type BMT45 TAILSTOCK HYDRAULIC NC TAILSTOCK (STD LIVE CENTRE) Taper MT 4 Quill Diameter Ø 56 MM Tailstock Travel 580 MM TANK CAPACITY Coolant Tank 150 L Lubricating Tank 0.7 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH MACHINE Floor Space (L x W) 2,220 X 1,610 MM Height 1,700 MM Weight 3,250 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO (RENISHAW) HYDRAULIC TYPE NC TAILSTOCK TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW STANDARD FACTORY FITTED MACHINE OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-i (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 150 LITRES FRONT DOOR INTERLOCK FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) Gedox Trgcopfx Aa Istt BACK SPIN TORQUE LIMITER TOOLBOX STANDARD TOOLING PACKAGE

Condition: used, Year of construction: 1997, operating hours: 8,900 h, Serial number: EM02CK10xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21601 Specifications: Model year unknown Approx. 8,900 hours Power: 97 kW Undercarriage (see pictures) Tracks replaced approx. 100 hours ago (around 2 years ago) Track width: 60 cm Machine width: approx. 297 cm Bucket AC/climate control See video Delivery by agreement Description:Hyundai Robex 210LC-3H excavator with 5 buckets.Tracks were replaced about 2 years ago and have been used for a maximum of 100 hours since. Something wrong with the gas Delivery by agreement. Gtodpjxp Av Rjfx Aa Iet Hours: 8900 Own weight: 20360 Width: 297 Kw: 97 Model: 210LC- 3H gravemaskin m/ 5 skuffer. Byttet belter for 100 timer siden

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA Godpfx Aaop T Ulzo Iett MODEL SKT 250 MS YEAR 2005 CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM SUB SPINDLE SPEED 4,000 RPM SPINDLE NOSE A2-8 SUB SPINDLE NOSE A2-6 SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR

Year of construction: 1995, condition: ready for operation (used), Travel X/Z: 180mm/510mm, max. turning length: 500mm, max. turning diameter over bed/face slide: 440mm/254mm, spindle speed: 3600rpm, bore: 70mm, tool stations: 8, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/1800mm, weight: approx. 4300kg, controls: Siemens Sinumerik. Including collet and jaw chuck. Documentation available. On-site inspection is possible. Expected to be available from April 2026. Gtodpfjx Tum Esx Aa Iot

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: B3170-0054, turning length: 700 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 290 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 5,000 mm, total width: 2,000 mm, quill diameter: 100 mm, overall weight: 7,000 kg, controller manufacturer: FANUC, controller model: SERIES 21i-TB, number of slots in tool magazine: 12, HYUNDAI - KIA SKT 250 M CNC Lathe - Operating voltage: 200/220 V Gtodpfox T Ac Usx Aa Iot - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 27 kVA - Max. machining diameter: 410 mm - Max. swing diameter over cross slide: 480 mm - Chuck size: 254 mm - Spindle bore: 95 mm - C-axis: 0.001° - Includes tailstock, a HAINBUCH collet chuck, a 12-station tool turret with live tooling, and a chip conveyor Attention: The item must be collected by binding agreement between 18 and 26 February 2026, on a date to be coordinated. FCA D-78087 Mönchweiler – loaded onto truck

Condition: used, Year of construction: 2022, operating hours: 1,934 h, 2022 | Hyundai HL975A CVT | Used Wheel Loader | 1934 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 189500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 49 approved ✅ 7 imperfect ℹ️ 0 issues ⚠️ Gtjdpfx Aajx Tczqs Ist 📌 Inspector's Comment: Well-functioning machine and good-looking machine, a bit of play on the quick coupler and articulation pin, tires need to be replaced as they are on the bad side, here and there some spots of damage. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39199 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD2200 FANUC 0IT PLUS CNC LATHE MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 45° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET. ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. Swing Over the Bed Ø 550 MM Swing Over the Carriage Ø 390 MM Maximum Turning Diameter Ø 380 MM Maximum Turning Length 565 MM Bar Capacity Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” – 203 MM 10” - [254] MM Spindle Bore Ø 76 MM Spindle Speed (rpm) 4,500 RPM Motor (Max/Cont.) 18.5 / 15.0 KW Torque (Max/Cont.) 206 / 125.3 NM Spindle Type BELT Spindle Nose A2-6 FEED Travel X 215 MM Travel Z 580 MM Rapid Speed X 24 M/MIN Rapid Speed Z 30 M/MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 12 Tool Size - OD 25 MM² Tool Size - ID Ø 40 MM Indexing Time 0.12 SEC / STEP TAILSTOCK Taper MT 4 Quill Diameter Ø 65 MM Quill Travel 80 MM Travel 513.7 MM TANK CAPACITY Coolant Tank 150 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 23 KVA Thickness of Power Cable Over 16 MM² Voltage 415V / 50Hz / 3Ph MACHINE Floor Space (L x W) 2,925 x 1,650 MM Height 1,820 MM Weight 4,100 KGS INCLUDED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX COOLANT GUN HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD OIL SKIMMER BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD STANDARD FACTORY FITTED MACHINE OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE Gtsdsx Tqppspfx Aa Ist 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" TOUCH SCREEN MONITOR FOR FANUC (SMART GUIDE i) HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 150 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) MACHINE MANUALS & OPERATOR HANDBOOKS TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK - 4MT WITH STD LIVE CENTER

Condition: used, Year of construction: 2012, operating hours: 5,925 h, Serial number: hhih0604cc000xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20243 Specifications: - 2012 model - 5925 Hours - 24060 kg - 107 kW - Machine width: 310 cm - Track width: 70 cm - Track controls - Rear hatch does not lock - Chassis should be replaced - Loose track plates - Gps - Excavator bucket - Hydraulic cleaning bucket can be included for an additional charge - Lights - Radio - Air conditioning/ac - Ready to deliver Description: We have a 2012 Hyundai Robex 235LCR-9 w/ Excavator bucket and gps for sale. The chassis should be replaced and the side hatch does not lock. Other than that, the machine works as it should according to the owner. But some additional costs must be considered. A hydraulic cleaning bucket can also be included for an additional charge. Ready to deliver Hours: 5925 Own weight: 24060 Total Weight: 24060 Width: 310 Kw: 107 Model: Robex 235LCR-9 m/ Graveskuffe og gps Gtjdsxdux Tspfx Aa Ijt

Condition: used, Year of construction: 2020, operating hours: 7,295 h, load capacity: 1,680 kg, lifting height: 4,250 mm, fuel type: electric, construction height: 2,500 mm, gearing type: automatic, Equipment: cabin, head guard, Hyundai Forklift 18BT-9U with Charger Ready for immediate use in trade and industry. Service and inspections have already been performed. The vehicle has no outstanding repairs. Electric, 48 V Attachments: - Load backrest - Sideshift Special equipment: - Rear work lights Gjdpfxox Sfxvj Aa Ijtt - Front work lights - Roof cover - Full free lift Product information "Hyundai 18 BT-9U Electric Forklift" With the Hyundai 18 BT-9U, you receive a battery-powered forklift with a 1,680 kg lifting capacity and a lift height of 4.25 m. This 3-wheel electric forklift stands out for its efficiency, long service life, and user-friendly operation. Key features at a glance: * Spacious operator cabin * Ergonomic operation * Easy to use * Dual motor drive, Schabmüller motor, ZF drive, & ZAPI controller * Excellent visibility * Numerous safety features * Energy-efficient steering Durable, dual-motor drive & electric steering The 18 BT-9U comes equipped with an efficient electric steering system. The forklift is powered by a dual motor drive. The installed ZF drive, Schabmüller motor, and ZAPI controller are known for their durability. Its semi-permanently oil-cooled disc brakes ensure the electric forklift remains reliable and consistently at your side. The Continental solid tires are also designed for long-term use. Easy to maintain & long operating times The forklift has been designed for easy maintenance. The battery is installed laterally, allowing for simple removal and replacement. Through the self-diagnosis function, all operational data can be read quickly. The brake fluid reservoir is also easy to access and refill. To further boost the electric forklift's performance, it has been compactly built. Additionally, its energy consumption has been optimized—compared to its predecessor, the battery runtime of the 18 BT-9U has been increased by 21%. Safe & ergonomic operation To ensure operator safety, the electric forklift is equipped with a panoramic mirror, fork lowering valves, an electric parking brake, and robust overhead guard. The operator always has a clear view of the forks and cargo thanks to the wide field of vision. With its operator presence detection system, the 18 BT-9U can only be moved with someone seated. When cornering, speed is reduced automatically for safety. The forklift can also be parked on ramps, as the anti-rollback feature prevents unintentional rolling. The spacious driver’s cabin provides ergonomic operation. Smooth fingertip control elements are installed, and a suspension seat adds extra comfort. All levers can be operated effortlessly. The full-color LCD monitor displays all key driving parameters at a glance, such as speed and battery status. Nationwide delivery in Germany available for an additional fee. Please also check our current inventory of over 150 immediately available transport vehicles and arrange a test drive today. We look forward to your visit! * TEST DRIVE * Your trust is in good hands with us. To ensure you feel confident and secure when purchasing your desired vehicle, we offer you:

Condition: used, Year of construction: 2017, operating hours: 4,651 h, 2017 | Hyundai R55W-9A with 3 excavator buckets | Used Wheeled Excavator | 4651 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 27100 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 52 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine had to be jump-started. It functioned during the inspection, but once switched off, it would not start again. The battery or the alternator may be faulty. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40028 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Gtsdpfsx Stkmex Aa Iet ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA SE2200LY WITH FANUC 0i-T PLUS CONTROL CNC LATHE WITH Y AXIS. TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HIGH PERFORMANCE ROLLER LM GUIDEWAYS. ▪ 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION OPTION] ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 30 X 36 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ C-AXIS SPINDLE & WEDGE TYPE Y-AXIS. Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 600 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 508 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 75 MM Spindle Speed 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max / Cont.) 167 [150.3] NM Spindle Type BELT Spindle Nose A2-6 FEEDS Travel X 210 MM Travel Y 110 (± 55) MM Travel Z 560 MM Rapid Speed X 30 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDEWAYS TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP Y-Axis Type WEDGE TYPE Milling Tool Speed 6,000 RPM Motor (Max / Cont.) 2.75 / 1.85 [2.8 / 3.8] KW Torque (Max / Cont.) 26.2 [27.0] NM Collet Size ER 20 - Ø 13 Type BMT45 HYDRAULIC NC TAIL STOCK (STD. LIVE CENTER) Taper MT#4 Quill Diameter Ø 56 MM Travel 580 MM Coolant Tank 200 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH Floor Space (L x W) 2,960 X 1,730 MM Height 1,920 MM Weight 4,200 KGS STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3-JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 200 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) Gtedpfox Tqkmjx Aa Iot BACK SPIN TORQUE LIMITER FRONT DOOR INTERLOCK TOOLBOX MAIN SPINDLE - 4,500 RPM, 15.0 / 11.0 KW, 167 NM BELT DRIVEN STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE HYDRAULIC TYPE NC TAILSTOCK - MT#4 56 MM QUILL, STD LIVE CENTER 12 STATION BMT45 TURRET, LIVE TOOLS 6K RPM, 2.75 KW, 26 NM INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO QUILL FORWARD / REVERSE CONFIRMATION DEVICE

Condition: used, Year of construction: 2000, operating hours: 5,100 h, Serial number: N4061xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21562 Specifications: Approx. 2000 model (according to owner) Hours: Approx. 5100 (may increase) Weight: 14,210 kg Undercarriage (see photos) Track width: 60 cm Total width: Approx. 265 cm SMP quick coupler Engcon Rototilt SMP digging bucket Ditch cleaning bucket Narrow bucket Grading bucket Ripper tooth Kaldnes hydraulic breaker Video included Ready for delivery Description:Hyundai tracked excavator with extensive equipment.The machine has approx. 5100 hours.Sold with Rototilt, 4 buckets, ripper tooth, and hydraulic breaker.Ready for delivery. Hours: 5100 Own weight: 14210 Width: 265 Gjdpfx Aexpdlaja Iett Model: 140LC-7 Beltegraver

Condition: used, Year of construction: 2020, operating hours: 7,168 h, load capacity: 1,680 kg, lifting height: 4,250 mm, fuel type: electric, construction height: 2,500 mm, gearing type: automatic, Equipment: cabin, head guard, Hyundai Forklift 18BT-9U with Charger. Immediately operational for commercial and trade applications. Godpfxsx Sfy To Aa Istt Service and inspections have already been completed. The vehicle has no pending repairs. Electric 48 V Attachments: - Load guard - Side shifter Special equipment: - Rear work lights - Front work lights - Roof cover - Full free lift Product Information: "Hyundai 18 BT-9U Electric Forklift" With the Hyundai 18 BT-9U, you get a battery-powered forklift with a load capacity of 1,680 kg and lift heights up to 4.25 m. This electric 3-wheel forklift stands out for its efficiency, long service life, and user-friendly operation. Key features at a glance: * Spacious operator cabin * Ergonomic working position * Easy to operate * Dual-motor drive, Schabmüller motor, ZF drive & ZAPI controller * Excellent visibility * Numerous safety features * Energy-efficient steering Durable, Dual-motor Drive & Electric Steering: The 18 BT-9U is equipped with an electric steering system that operates highly efficiently. The forklift receives its power via a dual-motor drive. The installed ZF drive, Schabmüller motor, and ZAPI controller are particularly durable. Its semi-permanent oil-cooled disc brakes ensure reliable, consistent performance. The Continental solid tires are also designed for long-term, demanding use. Easy maintenance & long operating times: The forklift is designed for easy maintenance—the battery is side-mounted for convenient removal and replacement. The self-diagnosis function allows you to quickly read all driving data. The brake fluid reservoir is also easily accessible for maintenance. The compact design further enhances the forklift’s performance. Additionally, improved energy consumption allows the battery run time of the 18 BT-9U to be increased by 21% over the previous model. Safe & ergonomic operation: To ensure operator safety, the electric forklift is equipped with a panoramic mirror, fork lowering valves, an electronic parking brake, and a robust overhead guard. With its wide field of vision, the operator always has the forks and transported goods in view. The operator presence detection system ensures the 18 BT-9U can only be moved when the driver is seated. For safe cornering, the driving speed is reduced automatically. The anti-roll-back function allows you to park the forklift safely on ramps. The spacious operator cabin is designed for ergonomic use and comfort, featuring smooth fingertip controls and a suspended comfort seat. All levers can be operated effortlessly. The LCD color display provides all key driving parameters at a glance, such as speed and battery status. Delivery within Germany available for an additional charge. Take a look at our vehicle inventory, with another 150 commercial vehicles immediately available—schedule your test drive today! We look forward to your visit! * TEST DRIVE * Your trust is in good hands with us. To ensure you have a secure and confident experience when purchasing your desired vehicle, we offer you...

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD3100L FANUC 0IT PLUS CNC LATHE MACHINE CONSTRUCTION & FEATURES 12” STANDARD CHUCK SIZE. 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. 10 STATION HIGH SPEED RIGID SERVO TURRET. 2,800 RPM 26.0 /18.5 KW HIGH POWER MAIN SPINDLE. 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. MACHINE CAPACITIES Swing Over the Bed Ø 750 MM Swing Over the Carriage Ø 500 MM Maximum Turning Diameter Ø 500 MM Maximum Turning Length 1,300 MM Bar Capacity Ø 102 MM MAIN SPINDLE Chuck Size Ø 12” – 305 MM Spindle Bore Ø 115 MM Spindle Speed (rpm) 2,800 RPM Motor (Max/Cont.) 26.0 / 18.5 KW Torque (Max/Cont.) 1,123 / 657 NM Spindle Nose A2-11 FEED Travel X 265 MM Travel Z 1,350 MM Rapid Speed X 24 M/MIN Rapid Speed Z 30 M/MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 10 Tool Size - OD 25 MM² Tool Size - ID Ø 50 MM Indexing Time 0.15 SEC / STEP TAILSTOCK Type QUILL TYPE TAILSTOCK [PROGRAMMABLE TAILSTOCK] Taper MT5 [MT4] Quill Diameter Ø 100 MM Quill Travel 120 MM TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 27 KVA Thickness of Power Cable Over 16 MM² Voltage 415V / 50Hz / 3Ph MACHINE Floor Space (L x W)4,405 x 1,978 MM Height 1,850 MM Weight 7,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT GUN HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO STEADY REST PREPARATION - PROGRAMMABLE CLAMPING & TRAVEL PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FACTORY FITTED OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 12 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE Gtsdpfxjx Tiggo Aa Ijt STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) TOOLBOX STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE STANDARD LIVE CENTER

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD2200Y FANUC 0IT PLUS CNC LATHE WITH Y AXIS. Gtodpfjx Th Nysx Aa Ist MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 4,000 RPM MAIN SPINDLE. ▪ 6,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET - BMT55P ▪ HARDENED & GROUND BOX GUIDEWAYS Swing Over the Bed Ø 820 MM Swing Over the Carriage Ø 650 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 610 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 76 MM Spindle Speed (Rpm) 4,000 RPM Motor (Max / Cont.) 18.5 / 15.0 [22.5 / 15.0] KW Torque (Max / Cont.) 206.2 / 125.4 [215.0 / 143.3] NM Spindle Type BELT Spindle Nose A2-6 Travel X 215 MM Travel Y 110 (± 55) MM Travel Z 680 MM Rapid Speed X 24 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 30 M / MIN HARDENED & GROUND BOX GUIDEWAYS Number of Tools 12 [24] Tool Size - OD 25 MM² Tool Size - ID Ø 20 MM Indexing Time 0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7] KW Milling Tool Speed 6,000 RPM Torque (Max / Cont.) 52.5 / 26.5 NM Collet Size Ø 16 – ER25 Type BMT-55P TAILSTOCK Taper MT 4 Quill Diameter Ø 80 MM Quill Travel 120 MM Travel 680 MM TANK CAPACITY Coolant Tank 200 L Lubricating Tank 2.0 L Electric Power Supply 27 KVA Thickness of Power Cable OVER 25 MM² Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,380 x 1,800 MM Height 1,950 MM Weight 4,700 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CHIP - CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 6.0 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD TURRET UPGRADE - 12 STATION 24 POSITION BMT55P, LIVE TOOLS 6K RPM, 5.5 KW STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) FRONT DOOR INTERLOCK TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD3100M FANUC 0IT PLUS CNC HIGH POWER TURNING CENTRE WITH HARDENED & GROUND BOX GUIDEWAYS, HIGH SPEED SERVO TURRET, C-AXIS & DRIVEN TOOLS & 12" STD CHUCK Swing Over the Bed Ø 750 MM Swing Over the Carriage Ø 500 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 740 MM Bar Capacity - Main Ø 102 MM MAIN SPINDLE Chuck Size Ø 12” – 305 MM Spindle Bore Ø 115 MM Spindle Speed (Rpm) 2,800 RPM Motor (Max. / Cont.) 26.0 / 18.5 KW Torque (Max. / Cont.) 1,123 / 657 NM Spindle Type BELT [GEARLESS] Spindle Nose A2-11 C-Axis Indexing 360° (0.001°) Travel X 265 MM Travel Z 830 MM Rapid Speed X 24 M / MIN Rapid Speed Z 30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 12 Tool Size - OD 25 MM² Tool Size - ID Ø 40 MM Indexing Time 0.15 SEC / STEP LIVE TOOLS Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max. / Cont.) 70.0 / 35.4 NM Collet Size ER32 - Ø 25 Type BMT65P QUILL TYPE TAILSTOCK [PROGRAMMABLE BUILT IN TAILSTOCK] Taper MT5 [MT4] Quill Diameter Ø 100 MM Quill Travel 120 MM Tailstock Travel 830 MM TANK CAPACITY Coolant Tank200 L Godpfxox Thzvs Aa Iott Lubricating Tank 1.8 L POWER SUPPLY Electrical Power Supply 27 [30 GEARLESS] KVA Voltage 415V / 50HZ / 3PH MACHINE Floor Space (L x W) 3,885 x 1,800 MM Height 1,850 MM Weight 6,050 KGS STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 12 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" TOUCH SCREEN MONITOR FOR FANUC (SMART GUIDE i) HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) TOOLBOX MAIN SPINDLE - 2,800 RPM, 26.0 / 18.5 KW, 1123 NM BELT DRIVEN TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM FACTORY FITTED MACHINE OPTIONS CHIP BUCKET STANDARD CHIP CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD (RATED AT 60HZ SUPPLY) BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - MANUAL PROGRAMMABLE TAILSTOCK IN LIEU OF STDMACHINE CONSTRUCTION & FEATURES 12” STANDARD CHUCK SIZE. 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET – BMT65P. 2,800 RPM 26.0 / 18.5 [35.0 / 25.0 GEARLESS] KW HIGH POWER MAIN SPINDLE. 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. C-AXIS MAIN SPINDLE. ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET.

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD3100YA FANUC 0IT PLUS CNC LATHE WITH Y AXIS MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 3,500 RPM MAIN SPINDLE. ▪ 5,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET – BMT55P ▪ HARDENED & GROUND BOX GUIDE WAYS MACHINE CAPACITIES Swing Over the Bed Ø 800 MM Swing Over the Carriage Ø 670 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 760 MM Bar Capacity – Main Spindle Ø 81 MM MAIN SPINDLE Chuck Size Ø 10” - 254 MM Spindle Bore Ø 91 MM Spindle Speed (Rpm) 3,500 RPM Motor (Max / Cont.) 26.0 / 18.5 KW Torque (Max / Cont.) 734 / 522 NM Spindle Type BELT Spindle NoseA2-8 FEED Travel X265 MM Travel Y120 (± 60) MM Travel Z830 MM Rapid Speed X24 M / MIN Rapid Speed Y10 M / MIN Rapid Speed Z30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools12 Tool Size - OD25 MM² Tool Size - IDØ 20 MM Indexing Time0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max / Cont.) 70/0 / 35.4 NM Collet Size Ø 16 – ER25 Type BMT-65P TAIL STOCK Taper MT 5 Gedpfxjx Thu Ne Aa Iott Quill Diameter Ø 100 MM Quill Travelb120 MM Travel b830 MM Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,630 X 1,910 MM Height 1,960 MM Weight 6,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR & CHIP BOX HELICAL INTERPOLATION FUNCTION HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO MAIN SPINDLE - 3,500 RPM, 26.0 / 18.5 KW, 734 NM BELT DRIVEN PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL FORWARD / REVERSE CONFIRMATION DEVICE QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 10 INCH 3 JAW HYDRAULIC CHUCK CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE HYDRAULIC CHUCK PRESSURE INTERLOCK - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 180 LITRES FULL SPLASH GUARDING SYSTEM CALL LIGHT TOOLBOX TOOLING PACKAGE QUILL TYPE TAILSTOCK 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM