Used Doosan Excavator for sale (293)

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available Gjdpevzln Rjfx Ad Hsua

Condition: used, Year of construction: 2009, Doosan HM1000 Heavy Duty Twin Pallet Horizontal Machine Centre. S/No HM10000080 (11/2009) with Fanuc 31i model A Control, Pallet size 1000mm x 1000mm, Travels X = 2100mm, Y = 1250mm, Z = 1250mm, Big Plus Spindle BT50, Spindle speeds 20 – 6000rpm, RUCKLE Full ‘B’ axis, Max Table load 5000kg (upgrade capacity), ATC Carousel 90 positions, U Axis fitted to Spindle for D-Andrea Heads, Renishaw TS27R Tool Probe, Renishaw RMP 60 Spindle Probe, Qty of BT50 Toolholders (Backend only), Screw Drive Swarf Conveyor, Filtermist, Main Spindle refurbished in 2020, Machine Weight 29,000kgs Location: These lots are located in Dunfermline, Scotland, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Guedoy Amg Ajpfx Ad Hea

Year of construction: 2008, condition: used, New: No VAT/margin: VAT qualifying Gedey Alt Ujpfx Ad Heua

Condition: used, Year of construction: 2018, x-travel 1300 mm y-travel 670 mm Godpfoy Aphcsx Ad Houa z-travel 625 mm control Siemens Sinumerik 828D weight of the machine ca. 8500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 2,350 h, load capacity: 3,500 kg, lifting height: 4,350 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), Equipment: head guard, lighting, pallet forks, sideshift, Doosan forklift D35C-7 year of manufacture 2018 Gedpoy Af Eqofx Ad Hjua 2350 operating hours triplex mast / sideshift and 4th valve

Condition: excellent (used), power: 103 kW (140.04 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 250 h, Equipment: air conditioning, Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: DL06V Performance Top speed: 20 km/h Gujdpfx Adey Adl Aj Hja Weights Empty weight: 18.500 kg Functional Bucket capacity: 1 m³ CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Serial number: DHKCEWCXCP5002429 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Aeolus Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 8,04x2,5x2,85 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - 2-piece boom - Ad blue - Additional hydraulics - Auto / hydraulic quick coupler - Battery disconnector - Blade - Hammer/shear hydr. circuit - Joystick control - Safety line rupture valve - boom/hoist - Safety line rupture valve - dipper/stick - Slope/rotator hydr. circuit

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control; Thermal sensors for highest precision; Y-axis; Sub-spindle with collet chuck; Spindle bore 80 mm (main spindle); All axes are flat guideways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders. Gujdoy Amflopfx Ad Hsa

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 2,163 mm, total width: 2,005 mm, overall weight: 7,500 kg, product length (max.): 4,438 mm, number of axes: 4, This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine includes a 12-station turret, a live tailstock, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600 LYB II horizontal turning machine we have for sale. Contact us for further details. • Capacity • Swing over bed: 780 mm • Swing over carriage: 630 mm • Recommended turning diameter: 315 mm • Max turning diameter: 376 mm • Max turning length: 1,350 mm • Bar capacity: 102–103 mm • Main spindle • Nose: ASA A2-11 • Bearing diameter: 160 mm • Through-spindle bore: 115 mm • C-axis indexing accuracy: 0.001° • Turret • Stations: 24 (option installed; standard 12) • Tool size: 25 mm • Boring bar capacity: 50 mm • Indexing time: 0.15 s Gsdoytt A Rjpfx Ad Hsua • Live tool speed: 5,000 rpm • Axes • C rotation: 360° • Rapid traverse • X: 30 m/min • Z: 30 m/min • C: 10 m/min • Tailstock • Type: Live tailstock • Quill diameter: 100 mm • Taper: MT5 • Quill stroke: 100 mm • Motor / Power • Live tool motor: 7.5 / 1.5 kW • Feed motor: 3.0 / 4.0 / 3.0 kW • Coolant pump motor: 0.4 kW • Electrical capacity: 46.40 kVA Additional equipment • 315 mm chuck • MORARI steady rest, 40–200 mm diameter range • Three motorized radial Eppinger live toolholders/spindles • Tool presetting system (tool presetter) Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2013, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, Godpewnfzcsfx Ad Heua

Condition: used, Year of construction: 1996, functionality: fully functional, DOOSAN PUMA 15 L FANUC CONTROL 1.6 METRE TURNING LENGTH MAX TURNING DIA APPROX 660 MM SWING OPVER BED 800 MM SPINDLE BORE 115 MM 12 STATION TURRET CHUCK DIA 15'' - HYD 3 JAW TAILSTOCK SWARF CONVEYOR HYD STEADY NOT INCLUDED IN SALE - THE BASE PLATE WILL STAY WITH THE MACHINE . EVERYTHING WORKING WELL WEIGHT 14 TON Guodpfsyw Nz Eox Ad Hja

Condition: excellent (used), Year of construction: 2002, operating hours: 4,844 h, functionality: fully functional, turning diameter over cross slide: 449 mm, turning length: 1,330 mm, turning diameter: 393 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, Daewoo Puma 300LB CNC Lathe Model: Puma 300 LB Year: 2002 Control: FANUC 18i-T Swing over Bed: 580mm Swing over Carriage: 449mm Max. Turning Dia.: 393mm Gedpfxeyxq A Te Ad Hjua Tuning Length: 1330mm Spindle Bore: 90mm dia. Spindle Speeds: 3500 RPM Machine With: 300mm Power Chuck Manual Fixed Steady Tool Holders Manuals

Condition: used, Year of construction: 2019, x-travel 1300 mm y-travel 670 mm z-travel 625 mm control Siemens Sinumerik 828D Gusdpfx Adjyzt Anj Hoa weight of the machine ca. 8500 kg

Condition: excellent (used), Year of construction: 2016, Traverses XYZ: 1020 x 540 x 510mm, Gujdpfxjyylzae Ad Hsa table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Heidenhain Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z; 1300 x 670 x 625mm, Table size 1500 x 670mm, maximum table load 1300 kgs. min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC Godsyyldhjpfx Ad Hjua spindle power 18.5 Kw, Fanuc OI series control, spindle probe, Through spindle coolant

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Technical details turning diameter 760 mm turning length 1540 mm control Fanuc 31i-B dimensions of machine 5500 x 2700 x 3110 mm chip conveyor 6900 x 2400 mm total power requirement 94,42 kW weight of the machine ca. 15,5 t Additional information Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Godjyzzf Rspfx Ad Hsua Spindle speed: 4000 rpm AC motor power (cont./30 min.) 22/26 kW Turning/milling head B-axis rotation / indexing 240 deg. (±120 deg.) Tool holder Capto C6 Speed in revolutions per minute 12000 rpm AC motor power 30 min. 15/18.5 kW Number of tools 40 (Opt. 80) Tool turret Number of driven tools 12 (12)

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 117 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 2,000 mm, fuel type: gas, mast type: triplex, Equipment: CE marking, full service history, head guard, lighting, trailer coupling, For sale is a Doosan 30 GP forklift plus LPG forklift. It is in near-new condition both technically and visually, with only a few minor scratches on the paint. It has only 117 operating hours and has been serviced as per specifications. Two doors have been retrofitted as well as a fourth hydraulic function for clamp, side shifter, etc. Collection only—no shipping available. Gujdeyzpy Nopfx Ad Hoa Price is net plus VAT. You will receive a proper invoice with VAT shown separately.

Condition: excellent (used), Year of construction: 2008, operating hours: 8,500 h, functionality: fully functional, Vertical machining center DOOSAN MYNX 540, year 2008, installed in 2014. Working hours: 8,500, power-on hours: 25,000 – fully functional, in excellent mechanical and electrical condition. Fanuc 21iMB CNC control Spindle 15/18 kW belt-driven, DIN 40 (DIN 69671 A40) Boxways – 30 tools – table size 1200mm x 540mm, maximum table load 800kg Spindle nose to table distance 150–775mm Travel: X 1020mm, Y 510mm, Z 625mm Gujdpoy Azgqefx Ad Hja Chip conveyor with tank M8 pump and high-pressure through-spindle coolant pump Mist extractor – internal light – three-color signal light 10 DIN tool holders included Maximum tool weight 8kg Automatic lubrication – transformer Weight 7,000kg – machine in operation and available for inspection CE certified – manuals and certification included.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, turning length: 700 mm, turning diameter: 230 mm, spindle motor power: 25 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, spindle nose: ASA 6, CNC FANUC TRAVELS X axis: 165 mm Z axis: 700 mm Y axis: 100 mm X2 axis: 165 mm Z2 axis: 700 mm Y2 axis: 100 mm CAPACITY Max turning diameter: 230 mm Max swing diameter: 230 mm Max turning length: 700 mm Max bar capacity: 65 mm MAIN SPINDLE Spindle nose: ASA 6” Spindle speed: 5,000 rpm Spindle motor power: 25 kW SUB-SPINDLE Spindle nose: ASA 6” Spindle speed: 5,000 rpm Spindle motor power: 25 kW UPPER TURRET Number of stations: 12 Live tooling power: 7.5 kW LOWER TURRET Number of stations: 12 Live tooling power: 7.5 kW Machine equipped with: • Two high-pressure pumps, 35 bar, with inverter Guodpfx Adsy Apcae Hja • Linear scales • Two collet chucks as per photos • Basic set of driven and static tool holders • Instruction manuals and CE declaration

Condition: used, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 2,690 h, Field of application: Construction Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m = Additional options and accessories = - Rubber tracks Gusdpeyn En Ujfx Ad Hsa

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,200 h, spindle speed (max.): 2,000 rpm, travel distance X-axis: 352 mm, travel distance Z-axis: 1,105 mm, controller manufacturer: FANUC, number of axes: 2, This DOOSAN PUMA 4100B was manufactured in 2015. A robust horizontal turning machine featuring a Fanuc 32i CNC system, it offers a maximum turning diameter of 550 mm and a length of 1,042 mm. Equipped with a 10-station turret and a chip conveyor, it's ideal for efficient machining with 7,200 hours of operation. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100B machine we have for sale. Contact us for more information. Gjdpfxox D Dtao Ad Hjua • CNC: Fanuc 32i with Manual Guide • Chuck diameter: 380 mm • Max turning diameter: 550 mm • Max turning length: 1,042 mm • Bar capacity: 117 mm • Turret: 10 stations • Condition: Machine overhauled Additional equipment • Chip conveyor • Touch probe arm

Condition: reconditioned (used), functionality: fully functional, fuel type: diesel, overall weight: 15,000 kg, chain condition: 90 %, Year of construction: 2019, operating hours: 4,350 h, Equipment: UVV, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, Doosan DX 140LCR-5 with adjustable boom and HS 10 attachment, with 4,080 operating hours, year of manufacture 12/2019. Major service and statutory UVV inspection recently completed. Price and attachments on request. Gusdpfsww T Aajx Ad Hsa

Year of construction: 2005, condition: used, max. turning diameter 540 mm max. turning length 1.020 mm bar capacity 65 mm Spindle speed 5.000 min -1 driven tools turning speeds 10.000 U/min control FANUC 18i-TB Dimensions (L x W x H) 4.520 x 2.300 x 2.600 mm machine weight ab. 12.000 kg CNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 S equipped with chip conveyor. Guodpfjlmr Eijx Ad Hsa Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 S

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm Gusdpfx Adow Dgcas Hea travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: used, Year of construction: 2021, operating hours: 4,056 h, Drive: Wheel Empty weight: 19.000 kg Digging depth: 5.725 m = Additional options and accessories = Godpfsyzcdzsx Ad Hsua - Digger blade

Condition: used, Year of construction: 2012, operating hours: 10,731 h, Location: Lleida (Lleida) The used Doosan DL300 wheel loader is engineered for operators to work efficiently for hours under excellent conditions. Offers more space, improved visibility, air conditioning, a very comfortable seat, ample storage, and additional features. Bucket capacity: 3 m3 (3,000 l). Second-hand wheel loader for sale, equipped with a front bucket, ideal for building construction, mining, roadworks, highways, tunnels, or hydraulic dam projects. Used Doosan DL300 brand loader. This Doosan DL300 loader outperforms the competition, featuring technologies that lower fuel consumption and set new standards in cab comfort. Gjdpfx Adoyzcduj Houa CE