Used Hyundai Forklift for sale (156)

Condition: used, Year of construction: 2021, functionality: fully functional, Control: FANUC 0i x-travel: 900 mm y-travel: 460 mm z-travel: 520 mm Table dimensions (LxW): 1.050 x 459 mm max. table load: 600 kg rapid travel x/y/z: 36 / 36 / 36 m/min max. spindle speed: 8.000 rpm Tool magazine for 30 + 1 tools chip conveyor Hand-held spray gun with coolant RENISHAW touch and spindle probe Hsdpfoynk Elsx Afcji

Condition: ready for operation (used), Year of construction: 2021, operating hours: 280 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, controller manufacturer: FANUC, number of axes: 4, This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information. Additional equipment • USB interface • Three-colour signal light • 1 set of soft jaws • CHIP CONVEYOR HS with lateral ejection • Transformer incl. cable • Manual compressed air gun • Bar feeder interface // Bar loader interface • Parts catcher main spindle • Parts unloader: Parts unloading system for the counter spindle incl. parts conveyor belt • Workpiece ejector / Workpiece drm: 230 mm / Workpiece X: 673 mm Machine Benefits Technical Machine Benefits • Linear (z) and flat-guided (x/y) 45 degree • Turning Ø: 230 mm // turning length: 673 mm • Chuck size both spindles: 8 inch (~210 mm) • Turret c-axis, 0. 001° // turret y-axis, +- 50 mm - upper turret • Driven tools: 5000 rpm, 5. 5 kw • 1 x axially driven tools // 1 x radial driven tools • Automatic tool probe • Coolant tank 270 litres // standard coolant nozzle • Internal cooling 30 bar • 30 bar coolant pump (60hz) Hodpfxsx D Itdj Afcji Extra Information Strongly reduced interference contour Better workpiece accessibility Workpiece stabilization through axial pull against workpiece stop Chuck Type: SPANNTOP mini Chuck Model: Axzug Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 155.00 mm Frontal Diameter: 111.00 mm Maximum Outer Diameter: 165.00 mm Clamping Position: 65.00 mm Clamping Device Thread: M102x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A054288.0009C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M102x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 65.00 mm Maximum Actuation Force: 65.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-HSP Connection [of Pull Tube]: External Thread Thread Designation: M74x1.5 Thread Length: 40.00 mm Front Position Pull Tube: 57.50 mm Stroke of Clamping Cylinder: 17.50 mm Spindle Bore Diameter: 76.00 mm Pull Tube Inner Diameter: 66.00 mm SPANNTOP mini Axfix 65 KK6 Chuck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 huck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 138.00 mm Frontal Diameter: 119.00 mm Maximum Outer Diameter: 167.00 mm Clamping Position: 50.00 mm Clamping Device Thread: M94x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A071618.0004C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M94x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 50.00 mm Maximum Actuation Force: 45.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-GSP

Condition: used, mileage: 185,000 km, power: 110 kW (149.56 HP), first registration: 02/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,000 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Now chat via WhatsApp: Quick & easy contact with our sales advisor. Attention! Sale preferably to commercial customers* Internal ID Number: [2992] ----Vehicle Highlights: * 19% VAT deductible * German vehicle * Regularly serviced * Euro 6 standard * Maxi high roof & long wheelbase (L3-H2) * Glass transporter frame (removable upon request) * Large multimedia display * Air conditioning * Tow bar (3,000 kg) * Cruise control * Rear view camera * Load compartment with wooden lining * and more… ---- Leasing or financing required? We offer attractive terms – also possible without down payment! Please feel free to contact us. ---- Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Notice: All information provided online is non-binding and serves as a general description of the vehicle only. Errors, mistakes, and prior sale reserved. The binding condition of the vehicle is determined exclusively by the purchase agreement on site or by written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to our business customers. Hedpfxjx Amr Ao Afcoi

Condition: used, mileage: 185,000 km, power: 110 kW (149.56 HP), first registration: 02/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Now chat via WhatsApp: Quick & easy contact with our sales consultant. Attention! Preferred sale to commercial customers. Hjdpsx Amr Nsfx Afcji Internal ID number: [2992] ---- Vehicle Highlights: * 19% VAT deductible * German vehicle * Regularly serviced * Euro 6 standard * Maxi High & Long (L3-H2) * Glass transport rack (available without rack upon request) * Large multimedia screen * Air conditioning * Trailer hitch (3,000 kg) * Cruise control * Reversing camera * Cargo area wood-lined * etc... ---- Leasing or financing required? We offer attractive options – possible even without a down payment! Feel free to contact us. ---- Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ---- Note: All information on the internet is for guidance only and serves merely as a general vehicle description. Errors, typing mistakes, and prior sale excepted. The binding specifications of the vehicle are determined exclusively in the local sales contract or by written assurances. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, overall weight: 2,000 kg, spindle speed (max.): 6,000 rpm, machine/vehicle number: 14736259, No minimum price – guaranteed sale to the highest bidder! Hodpjym N Agsfx Afcji By placing a bid, you commit to timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS X-axis travel: approx. 100 mm Z-axis travel: approx. 200 mm Spindle speed: up to 6,000 rpm MACHINE DETAILS Operating voltage: 380 V Frequency: 50/60 Hz Rated current: 24 A Connection load: 25.5 kVA Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,500 x 2,100 mm Weight: 2,000 kg External reference: Elos - Lot 17

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 775 h, Equipment: chip conveyor, documentation/manual, HYUNDAI WIA L150SY Turning Center (Y-Axis, Sub-Spindle) We are offering for sale a HYUNDAI WIA L150SY CNC turning center. The machine is being sold due to investment in newer equipment and limited production space. The machine is in good technical condition and currently in operation. Inspection under power is possible by appointment. Hodpfx Ajymwt Hofcsi This model features Y-axis and live tooling capability, making it suitable for complex and precision parts production. All standard technical specifications are available online. Additional information, videos, or detailed photos can be provided upon request. Prior to shipping, the machine will be professionally cleaned. Tooling, holders, chucks, and accessories currently used with the machine can be included in the sale. Transportation are the responsibility of the buyer. Please contact me via email or WhatsApp for further information.

Condition: used, mileage: 158,000 km, power: 110 kW (149.56 HP), first registration: 01/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,500 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales advisor. Attention!!! Sale preferably to commercial customers. Internal ID Number: [ 2989 ] ----Optional add-ons: * 12–64 month warranty (valid throughout the EU) * New inspection * New TÜV & emissions test (AU) * Nationwide delivery * Financing available, also with no down payment * Reversing camera/tow bar can be retrofitted on request! ----Vehicle highlights: * 19% VAT deductible * German vehicle * Regularly serviced * 2nd owner * Euro 5 emissions standard * High roof + long wheelbase (L2-H2) * Air conditioning * Cruise control * Towing capacity = 3,000 kg * Ready for immediate use Further equipment: Overhead storage compartment in cab, driver airbag, exterior mirrors with integrated indicators, 100 Ah battery, 105 Ah battery, on-board computer, brake pad wear indicator, driver assistance system: emergency braking assist, windscreen with upper band filter, 130 A alternator, rear wing doors (opening angle 180 degrees), body/build: standard high-roof van, black radiator grille, cargo partition wall without window, steering column (steering wheel) adjustable in height and reach, engine 2.5 L – 110 kW CRDi CAT, radio preparation, 2 speakers, wheelbase 3,435 mm, tyre repair kit, particulate filter, low emissions compliant with Euro 5, right-side sliding door (cargo/passenger compartment), front and rear mud flaps, driver’s seat height adjustable, seat cover/upholstery: fabric/artificial leather, seats in cab: dual passenger seat, start/stop system, 3 x 12V sockets in cab, electronic immobiliser, central locking with remote control, permissible gross weight 3.5 t Looking for leasing or financing? We offer attractive deals – also possible with no down payment! Please feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 Hedpjwzrdqjfx Afcsi 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typographical mistakes, and prior sale excepted. The binding condition of the vehicle is defined exclusively in the purchase contract on site or through written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: used, mileage: 88,000 km, power: 110 kW (149.56 HP), first registration: 08/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,515 mm, total width: 2,038 mm, total height: 2,685 mm, loading space length: 3,000 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales advisor. Attention!!! Preferential sale to commercial customers. Internal ID number: [2947] ----Optional extras available: * 12–64 month warranty (valid throughout the EU) * New inspection * New TÜV (MOT) & emissions test * Nationwide delivery * Financing available, even without down payment ----Vehicle Highlights: * 19% VAT deductible * German vehicle * Service history included * Regularly maintained * Accident-free * 2nd owner * High roof + long wheelbase (L2-H2) * Tow bar (3,000 kg) * Automatic climate control * Cruise control * Bluetooth multimedia function * Reversing camera including parking assist * Additional features: Overhead storage in cab, driver’s airbag, exterior mirrors with integrated indicators, 100 Ah battery, 105 Ah battery, onboard computer, brake pad wear indicator, driver assistance system: emergency brake assist, windscreen with top band filter, 130 A alternator, front cupholders, rear wing doors (opening angle 180°), body/variant: high-roof panel van, black radiator grille, load compartment partition without window, height/lumbar adjustable steering column, engine 2.5 L – 110 kW CRDi CAT, radio pre-installation, 2 speakers, wheelbase 3,435 mm, tire repair kit, particulate filter, low emissions (Euro 5 standard), right-side sliding cargo/passenger door, front and rear mud flaps, height-adjustable driver’s seat, seat covers/upholstery: cloth/artificial leather, cab seats: double passenger bench, start/stop system, 3x 12V power sockets in cab, electronic immobilizer, remote central locking, permitted gross vehicle weight 3.50 t ----Leasing or financing required? We offer attractive packages — even with zero down payment! Please feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 ----Note: Hjdpfsxvwy Dex Afcsi All information provided online is non-binding and only serves as a general description of the vehicle. Errors, typos, and prior sale excepted. The binding vehicle specifications result solely from the in-person purchase contract or from confirmed written assurances. Vehicles with mileage over 50,000 km or older than 3 years are preferentially sold to commercial customers.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 990 h, load capacity: 16,000 kg, lifting height: 4,010 mm, fuel type: diesel, mast type: simplex, construction height: 3,750 mm, fork carriage width: 2,488 mm, fork length: 2,440 mm, empty load weight: 20,270 kg, total length: 5,080 mm, drive type: Diesel, construction width: 2,497 mm, Diesel forklift Load centre: 600 ISO class: Pin-Type Mast type: Standard Technical condition: very good Front tyre type: pneumatic Front tyre size: 12.002.018 Front tyre condition: 80 - 100% Rear tyre type: pneumatic Hjdpoymt E Eofx Afcoi Rear tyre size: 12.002.018 Rear tyre condition: 80 - 100% Description: Workshop inspected, new UVV & service Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, full cabin, air conditioning, CE certificate, weighing system, twin tyres, Cummins QSB6.7 engine

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 214 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,427 mm, fuel type: electric, mast type: triplex, construction height: 2,543 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 5,211 kg, total length: 2,485 mm, drive type: Elektro, construction width: 1,250 mm, Electric 4-wheel forklift Load center: 500 mm Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tires type: Superelastic non-marking white Rear tires type: Superelastic non-marking white Battery voltage: 48V Battery Ah: 810Ah Battery manufacturer: GNB Battery year of manufacture: 2022 Description: Workshop-checked, new safety inspection (UVV) & service, new paintwork Hsdeymt D Uepfx Afcji Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, front windscreen, half cab, load guard, impulse control, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 237 h, load capacity: 5,000 kg, lifting height: 5,900 mm, fuel type: electric, mast type: triplex, construction height: 2,840 mm, fork length: 2,400 mm, empty load weight: 8,150 kg, total length: 3,040 mm, drive type: Elektro, construction width: 1,424 mm, Electric 4-wheel forklift Hodpfx Asymt Dbjfcei Load centre: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tyre type: superelastic Rear tyre type: superelastic Battery voltage: 80V Battery capacity: 700Ah Battery manufacturer: GBD Battery year: 2023 Description: Workshop tested, new UVV & inspection, new paintwork Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, full free lift, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 150 h, load capacity: 2,000 kg, lifting height: 5,500 mm, free lift: 1,642 mm, fuel type: electric, mast type: triplex, construction height: 2,424 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Hodpeymtz Hsfx Afcoi Technical condition: Very good Front tyres type: Superelastic non-marking white Rear tyres type: Superelastic non-marking white Battery voltage: 48V Battery capacity: 625Ah Battery year: 2023 Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, impulse control, full free lift, CE certificate, scale,

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,427 mm, fuel type: electric, mast type: triplex, construction height: 2,462 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 5,211 kg, total length: 2,485 mm, drive type: Elektro, construction width: 1,250 mm, Electric 4-wheel forklift Load center: 500 mm Hedpfx Afsymtztecoi Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: New Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 48V Battery capacity: 720Ah Battery manufacturer: GBD Battery year of manufacture: 2023 Sideshift, 3rd valve, 4th valve, rear work light, front work light, load backrest, pulse control, full free lift, CE certificate, scale,

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 51 h, load capacity: 3,000 kg, lifting height: 6,000 mm, free lift: 1,750 mm, fuel type: diesel, mast type: triplex, construction height: 2,490 mm, fork length: 1,200 mm, empty load weight: 4,541 kg, total length: 2,701 mm, drive type: Diesel, construction width: 1,200 mm, Diesel forklift Load center: 500 Hsdpeymty Aefx Afcei ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tire type: Superelastic Rear tire type: Superelastic Description: Workshop inspected, new UVV and inspection, new paintwork Sideshift, Workshop inspected, new UVV and inspection, new paintwork 3rd valve, 4th valve, rear working lights, front working lights, roof cover, soot filter, full free lift, CE certificate, scale,

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 5 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,764 mm, fuel type: diesel, mast type: triplex, construction height: 2,490 mm, fork length: 1,200 mm, empty load weight: 4,541 kg, total length: 2,701 mm, drive type: Diesel, construction width: 1,200 mm, Diesel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Hedpfeymtyvjx Afcei Technical condition: New Front tires type: Superelastic Rear tires type: Superelastic Description: Workshop tested, new UVV & inspection, new paintwork Sideshift, 3rd valve, 4th valve, rear work light, front work light, roof cover, soot filter, full free lift, CE certificate, scale,

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 1,037 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,464 mm, fuel type: gas, mast type: triplex, construction height: 2,190 mm, fork length: 1,200 mm, total length: 2,676 mm, drive type: Treibgas, construction width: 1,230 mm, LPG forklift ISO class: ISO class 3 = 2,500 – 4,999 kg Mast type: Triplex Hjdpfxoymtyps Afcji Technical condition: very good Front tyres type: superelastic Front tyres condition: 80 – 100% Rear tyres type: superelastic Rear tyres condition: 80 – 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, air conditioning, full free lift, CE certificate, safety light,

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 5 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,764 mm, fuel type: diesel, mast type: triplex, construction height: 2,490 mm, fork length: 1,200 mm, empty load weight: 4,541 kg, total length: 2,701 mm, drive type: Diesel, construction width: 1,200 mm, Diesel forklift Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Hodpjymtx Eofx Afcei Mast type: Triplex Technical condition: New Front tire type: Superelastic Rear tire type: Superelastic Description: NEW MACHINE Sideshift, 3rd valve, 4th valve, rear work light, front work light, roof cover, soot filter, full free lift, CE certificate, scale,

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 5 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,764 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, fork length: 1,200 mm, empty load weight: 4,541 kg, total length: 2,701 mm, drive type: Diesel, construction width: 1,200 mm, Diesel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Hodsymtxxepfx Afcoi Mast type: Triplex Technical condition: New Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: NEW MACHINE Sideshift, 3rd valve, 4th valve, rear work light, front work light, overhead guard, soot filter, full free lift, CE certificate, scale,

Condition: used, color: other, Year of construction: 2019, operating hours: 430 h, Power internal combustion engine: 46 HP (34 kW) GVW: 2.625 kg Make of engine: Kubota CE mark: yes Hodpfxsuficuj Afcei Serial number: HHKHS802CJ0001185 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly. We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: used, color: other, Year of construction: 2019, operating hours: 400 h, Power internal combustion engine: 46 HP (34 kW) Hedpouficzofx Afcji GVW: 2.625 kg Make of engine: Kubota CE mark: yes Serial number: HHKHS802EJ0001184 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly. We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: used, fuel type: diesel, Year of construction: 2020, operating hours: 5,670 h, Equipment: air conditioning, Year of manufacture: 2020 Drive: Wheel Empty weight: 14.000 kg Hedpfx Aex U U Thjfcoi Dimensions (LxBxH): 769 x 250 x 314 cm Engine type: Cummins Cummins QSB6.7 Digging depth: 5.25 m Bucket volume: 0.27 m^3

Condition: good (used), Year of construction: 2018, swing dia. 600 mm turning diameter 310 mm turning diameter over slide 355 mm spindle bore 53 mm bar capacity 45 mm turning speed range 6000 U/min turning length 388 mm travel -z axis 400 mm travel -x axis 220 mm turret (x-stations) 12 Hjdpfewgi Hyox Afcji control SIEMENS 828D (Touch) c-axis 0,001° 0 total power requirement 20 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. LTH 3,7 x 2,0 x 2,0 m Includes preparation for automation (loading robot) Year of manufacture: 11/2017, delivery: 2018 - Automatic door - 12-station tool turret, driven at 5,000 rpm - Workpiece catcher - RENISHAW touch probe, automatically retractable - Tailstock - Chip conveyor - Coolant pump Accessories: Including collet chuck Including 2 x driven tool holders (radial + axial) Including 9 x fixed tool holders Including USB & LAN interface Including manuals

Condition: used, Year of construction: 2017, operating hours: 7,563 h, Equipment: all wheel drive, MAKE: HYUNDAI MODEL: HW160 YEAR: 2017 CE: YES OPERATING HOURS: 7563 TYRES/UNDERCARRIAGE: 100% POWER: 127KW ENGINE: CUMMINS WEIGHT: 18,950KG OPTIONS: NEW BUCKET ADDITIONAL FUNCTIONS NEW TYRES Hodpfxex Itmte Afcei BLADE AND OUTRIGGERS PRESSURIZED CABIN CENTRAL LUBRICATION SYSTEM AIR CONDITIONING LIKE NEW

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 520 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 480 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, spindle speed (max.): 24,000 rpm, spindle motor power: 10,500 W, tool weight: 2,800 g, number of axes: 3, This 3s Hyundai Wia I-cut 380MD vertical machining centre was manufactured in 2012. It features a maximum spindle speed of 24,000 rpm and a spindle power of 10.5 kW, providing efficient machining capabilities. The working area includes a 520 mm X-axis and a 480 mm Z-axis, making it suitable for various applications. Consider the opportunity to buy this Hyundai Wia I-cut 380MD vertical machining centre. Contact us for further details. • Table size: 2 × 650 × 400 mm • Spindle taper: BBT30 • Rapid traverse (X/Y/Z): 56 m/min • Tool magazine: 20 tools (BBT30) • Maximum tool length: 200 mm • Maximum tool diameter: 65 mm • Through-spindle coolant: 20 bar • Prepared for connection of rotary axes on both tables Hsdpfxoyk Em No Afcsi • Condition: Machine is connected and fully operational; inspection and testing possible at any time Additional equipment • Chip conveyor included

Condition: used, mileage: 341,142 km, power: 77 kW (104.69 HP), fuel type: hybrid, gearing type: automatic, first registration: 02/2021, next inspection (TÜV): 02/2027, color: black, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, * €10,900 NET (excluding VAT) * Hyundai Kona 1.6 GDI HEV Fashion Hybrid BlueDrive Navigation Climate Control Leather Head-Up Display Tow Bar Automatic * 5 seats (2+3) * Automatic transmission * Armrest * Radio CD * Front, side, additional airbags Hedsykhmxjpfx Afcoi * Tinted windows * Cruise control * Automatic climate control * Heated seats * Head-Up display * Paddle shifters * Multifunction steering wheel * On-board computer * Bluetooth * Rain sensor * USB * Electric windows * Electrically folding exterior mirrors * Electric mirrors * Central locking * Tire pressure monitoring system (TPMS) * Lane keeping assist * Traction control * Navigation system * Touchscreen * Distance warning system * Rear-view camera * Isofix * ABS * ESP * LED daytime running lights * Hands-free system * Alloy wheels * Fog lights * Roof rails * Full leather interior * Wheelbase: 293 cm * Unladen weight: 1,945 kg * Payload: 1,195 kg * Gross vehicle weight: 3,140 kg * Car registration * Vehicle number: 39 OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment only...) CONTACT DETAILS Phone: WhatsApp: Email: Export and customs license plates (export numbers) are available through us. Errors in writing and prior sale reserved. Technical details and equipment features must be checked separately. The binding condition of the contract is only that which is inspected and confirmed in writing at the time of purchase. Please arrange an appointment...