Used Kasto Kastotec A5 for sale (142)

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Nodpfexg Rhvsx Afxolh

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m total power requirement 25 kW weight of the machine ca. 4920 kg Equipment/accessories: Nedpfx Asxb Edzjfxolh - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentation

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A3 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 330 Sawing capacity flat 90° 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) Nledpfxou R R Acs Afxsh length 4600 mm width 2150 mm height 2310 mm weight 4300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2003, Sawing capacity round 330 mm Sawing capacity flat 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Power 7.5 kW Nodpfsu Sq Eyjx Afxolh Saw weight 4300 kg

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Nodjv S E Edjpfx Afxelh

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width Nledpfou R R Avex Afxsh 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 1997, cutting diameter 520 mm saw band length 7239 mm cutting range square 520 x 520 mm feed length 500 mm feed length 4500 mm cutting length min. 6 mm 10/100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm weight of the machine ca. 4,2 t Nsdpfxsxfwd Io Afxelh dimensions 2300 x 3420 x 2385 m Control MINIPOS 807 CNC control Minipos 807 Special accessories: - Coolant device - Chip conveyor - Removal roller conveyor - Standard jaws

Condition: used, Year of construction: 1994, cutting diameter 520 mm Nodewm Rm Ijpfx Afxslh saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: used, Year of construction: 1994, Cutting diameter 520 mm Blade length 7239 mm Cutting width 1.3 mm POSIMOD control Cutting area square 520 x 520 mm Feed length 500 mm Feed length multiple 4500 mm Smallest section length 6 mm Remaining piece length min./max. 10 / 100 mm Cutting speed 20 - 130 m/min Saw band dimensions 7239 x 50 x 1.3 mm Saw motor 5.5 kW Total power requirement 10.0 kW Machine weight approx. 3.8 tons Machine dimensions L x W x H 3.42 x 2.30 x 2.40 m - 2-column-guided - Nlsdpfx Aswqz Azsfxoh Accessories: Roller feeder 2500 mm long, chip conveyor, cooling system

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power. Nledpfxovxwkfe Afxjh

Condition: used, Year of construction: 1987, Technical details: cutting diameter: 520 mm saw band length: 7239 mm cutting width: 520 mm sawing motor: 5,5 kW cutting speed: 20 - 130 m/min cutting width at rectangle material: 520 mm total power requirement: 9,5 kW weight of the machine ca.: 3,8 t Machine with multi feed device chip conveyor infeed roller stand * Nlodjvb Dqqopfx Afxjh

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton Njdpfx Afov Sfp Aexolh - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: used, Year of construction: 1980, length 380 mm max. band length 430 mm weight of the machine ca. 0,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Nljdpfeup H Nnjx Afxeh +++++

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Nlsdpoxrg E Isfx Afxoh Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min

Condition: used, Year of construction: 2014, functionality: fully functional, saw band length: 5,700 mm, saw band width: 41 mm, cutting range round steel at 90°: 440 mm, cutting width (max.): 440 mm, cutting height (max.): 520 mm, Ref. No. 5.4-780 1 used automatic bandsaw KASTOtwin A4x5, year 2014 Chip conveyor Coolant system Technical specifications: Cutting range round: 440 mm Cutting range square: 520 x 440 mm Infinitely variable cutting speed: 15–150 m/min Saw blade dimensions: 5700 x 41 x 1.3 mm Drive capacity: 5.5 kW Nlsdpfxexrcppo Afxjh Machine weight approx.: 3000 kg Technical data, accessories and machine description are non-binding.

Condition: used, 1 piece metal band saw KASTO KASTOCUT G U3 with 2 work stands, as per photos and inspection Colour: grey Condition: used Payment method: Advance payment by bank transfer Storage location: Hall 2 Shipping: Collection only – Shipping is not offered for this item! Nlsdpfxsxrcqms Afxsh

Condition: good (used), Year of construction: 2002, • Technical machine advantages: o - Design: 90° automatic saw Nlsdpfx Aev U Az Ujfxsh o - Design: 90˚ up to d= Ø 400 mm or flat 400 x 400 mm o - Saw blade dimensions: 5700 x 41 x 1.3 mm o - Cutting speed: 20 - 110 m/min

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Round material: Ø 400 mm Rectangular: 400 x400 mm Maximum material weight: 1000 kg/m Cutting speed: 20 to 110 m/min Saw blade dimensions: 5090 x 41 x 1.3 mm Nledpfx Ajxpymajfxjh Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: used, Year of construction: 1988, 370 mm rund ja Nodpfx Afeupmwroxelh möglich

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Saw band 250-285 mm Motor power 5.5 KW Cutting speed 35-160 m/min Working range square max.: 15 - 60 mm Working range round max.: 15 - 70 mm Saw feed 2 - 100 mm/s infinitely adjustable Cutting length 5-250 mm Feed speed max. 1000 mm/s Weight (saw)approx.: 1500 kg (magazine)approx.: 800 kg Dimensions LxWxH (saw)approx.: 1100mm x 1600mm x 2300mm (magazine)approx.: 7500mm x 1400mm x 1600mm The machine is suitable for mass cutting of steel due to its equipment and construction and is the predecessor of the KASTOwa C7 and KASTOspeed C9. The machine will be in mint condition after a general overhaul (retrofit), which is guaranteed by our company. The machine will be generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - New PLC control Siemens S7 - Conversion to Siemens HMI - Conversion to fully electronic section length selection (optional) Nodpfx Afsuizlcoxolh - New electrical components - New pneumatic lines - Overhaul or replacement of all pneumatic components - New hydraulic lines - Overhaul or replacement of all hydraulic components - Overhaul of Menzel minimum lubrication system - Replacement of general wear parts - Overhaul of the loading magazine - Extension of the safety concept The machine also has: - a slide-off magazine for 6m bars - Hydraulic material feed unit Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Conversion to spindle extraction - Conversion to trapezoidal spindle stop manual 0-800mm - Conversion to fully electronic ball screw stop 0-800mm - Conversion of main saw drive to 18 KW - Delivery and installation on your premises - Training of your employees

Condition: used, Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent Nljdpfoxpvwhsx Afxeh 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture). The price is an already reduced special price. For an additional charge at cost: 2000 mm infeed roller conveyor and 1500 mm outfeed roller conveyor with stop. 400 mm roller width from a similar machine would be available for €300. However, these must be customized by the buyer (see last image). Machine dealer with own stock of 1600 m². Nedpfx Aevmtdkefxslh

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KASTOssb A2, year of manufacture 2008. Photos show the current condition; the machine is still being reconditioned. Technical data: - Cutting range round: 260 mm - Cutting range square (W x H): 260 x 260 mm - Smallest cuttable size: 10 x 10 mm - Shortest length of cut-off piece: 5 mm - Shortest remnant length in single cut: 110 mm - Length: 1670 mm - Width incl. chip conveyor: 2080 mm - Height: 2130 mm Nljdpfx Asxn Ix Ujfxjh - Machine weight approx.: 2200 kg - Total connected load: 9.5 kW - Saw motor power: 5.5 kW - Continuously adjustable cutting speed: 15 – 125 m / min - Automatic material feed length, single stroke: 600 mm - Automatic material feed length, multiple stroke: 9999 mm - Saw blade dimensions: 4,115 x 41 x 1.3 mm

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, The fully hydraulic production hacksaw has a universal hydraulic system for cutting thin and thick-walled profiles as well as solid material exclusively or alternately without changing the saw blade with the uniform tooth pitch of 3 or 4 teeth per inch. per inch. Pre-tensioned bow guide, closed oil hydraulics, triple swivel bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lifting movement and accelerated return stroke, equipped as standard with infinitely variable mitre device as standard. Lifting of the saw bow in rapid motion. Pendulum vice for perfect saw blade utilisation. Longitudinal guide with ground and hardened guide rails for transferring the cutting pressure forces to the saw bow. Automatic limit stop. Push button operation for functions on, off and upward movement of the saw bow. Manufacturer KASTO Metal hacksaw Machine type EBS 360 U Drive power: 4,4 KW Stroke rates: 37/51/74/102 min Cutting speed: 14/20/28/39 m/min Universal hydraulics: standard Saw feed hydraulics Cutting range round: 660 mm Cutting range flat: 360x200 mm Mitre 0-45 ° Material support height: 500 mm Weight: 820 kg. Length/width: 1915x750 mm Height: 1090 mm Saw blade dimension: 550x45x2 mm Accessories. Coolant system Njdoh Ug Egspfx Afxolh The function of the machines has been checked and repaired. If you have any questions, please do not hesitate to contact us. If you need a different cutting range, please let us know, as we still have other machines in stock. We reserve the right of ownership until all our claims have been paid in full. With kind regards Michael Maurath

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Technical Data: - Cutting capacity at 90° - round: 320 mm - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame - Hydraulically operated movable workpiece vice - Hydraulic mitre adjustment with digital angle display - Swarf conveyor - Motorised infeed roller conveyor KASTO, 10 m Njdpexph E Rofx Afxjlh - Outfeed roller conveyor KASTO with length stop, 6 m - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg - Roller conveyor weight approx.: 3500 kg