Used Kovosvit Mas Masturn 550I for sale (37)

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Quill stroke: 310 mm Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Total power requirement: 4 kW Gsdoztp Hwjpfx Aixjka Machine weight approx.: 4.6 t

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Manufacturer: Kovosvit (Czech Republic) Gkodpjw Hanhsfx Aixoa Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 2,244 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 610 mm, overall weight: 2,530 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 1998. This KOVOSVIT MAS OPTIMAT A50CA weighs 2530 kg and includes a bar feeder system with a long loading channel attached to the machine. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS OPTIMAT A50CA machine we have for sale. Contact us for further details. - Weight: 2530 kg- Control: Curve- Spindle diameter: 52 (60) mm- Spindle speed: 68 – 2,244- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Special feature: Iemca loading magazine- Included Components: Bar feeder system (long loading channel attached to the machine) Technical Specification Counter Spindle No Driven Tools No Gjdpfx Aezhw H Ujixoka

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 2,818 rpm, travel distance X-axis: 110 mm, travel distance Z-axis: 310 mm, overall weight: 2,505 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 2002. This KOVOSVIT MAS Optimat A42 features a robust design with a weight of 2505 kg and a total power consumption of 12 kVA. It is equipped with a manual guide bar/tube loading support system for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS Optimat A42 machine we have for sale. Contact us for further details. - Main Phase Voltage: 3x 400 V ~- Rated Current: 26 A- Total Power Consumption: 12 kVA- Frequency: 50 Hz- Control Circuit Voltage (AC): 110 V ~- Control Circuit Voltage (DC): 24 V =- Machine Lighting Voltage: 220 V- Machine Lighting Wattage: 2x 20 W- Control: Curve- Spindle diameter: 42 (50) mm- Spindle speed: 85 – 2,818- Number of tools: 4 side-cutting tools- 6 tool stations on the turret- Schematic / Diagram Reference: SCH 338 / 40004 - 34- Bar Feed Equipment: Fitted with manual guide bar/tube loading support system Technical Specification Gkedpfxszhwcpo Aixea Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, overall weight: 2,520 kg, spindle speed (max.): 2,244 rpm, number of slots in tool magazine: 6, number of axes: 3, This 2-axis KOVOSVIT MAS Optimat A52 was manufactured in 2003. It has a machine weight of 2520 kg and includes a bar feeder guide tube system, tool turret station, and cooling fluid hose lines. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS Optimat A52 vertical horizontal turning machine we have for sale. Contact us for further details. - Main Voltage: 3x 400 V ~- Frequency: 50 Hz- Full Load Current: 25 A- Total Power Capacity: 12 kVA- Control / Auxiliary Voltages: 110 V ~ / 24 V = / 230 V- Lighting Power: 2 x 20 W- Control: Curve- Spindle diameter: 52 (60) mm- Spindle speed: 68 – 2,244- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Wiring Diagram Reference (SCH): 338 / 49004 - 34- Included Equipment: Bar feeder guide tube system, tool turret station, cooling fluid hose lines Godpfx Ajzhwazeixska Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1994, spindle speed (max.): 2,244 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 500 mm, overall weight: 2,490 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 1994. This KOVOSVIT MAS OPTIMAT A50CA features a robust design with a machine weight of 2490 kg. It includes essential equipment such as a bar feeder guide channel system and a tool turret assembly. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS OPTIMAT A50CA machine we have for sale. Contact us for further details. Gedpfx Aijzhwabjxska - Main Voltage: 3 x 380 V- Current: 25 A- Frequency: 50 Hz- Control Voltage: 24 V DC / 110 V AC- Enclosure Protection Rating: IP 54 / IP 20- Technical Standard: ČSN 33 2200- Control: Curve- Spindle diameter: 52 (60) mm- Spindle speed: 68 – 2,244- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Included Equipment: Bar feeder guide channel system, coolant piping hoses, work area enclosure guarding with viewing window, tool turret assembly Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 2,818 rpm, travel distance X-axis: 45 mm, travel distance Z-axis: 90 mm, overall weight: 2,500 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 2005. This KOVOSVIT MAS OPTIMAT A42 features a machine weight of 2500 kg and a total power consumption of 12 kVA. With 2 units available, if you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS OPTIMAT A42 machine we have for sale. Contact us for further details. - Main Voltage: 3x 400 V- Frequency: 50 Hz- Current: 25 A- Total Power Consumption: 12 kVA- Control Voltage (AC): 110 V- Control Voltage (DC): 24 V- Lighting: 230 V / 2x 20 W- Control: Curve- Spindle diameter: 42 (50) mm- Spindle speed: 85 – 2,818- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Wiring Diagram Reference: SCH 338 / 40004 - 34- 2 units available Gkodpfx Aiezhv Tgjxoa Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2014, KOVOSVIT MAS MULTICUT 630S x 3000 multi-axis turning center for sale. Heavy-duty multitasking machine configured for complete machining of large and complex components. Machine is equipped with milling spindle, lower turret, right spindle/tailstock, automatic tool changer and hydraulic steady rest system. Machine is currently under power and can be inspected in production. Main configuration: MULTICUT 630S x 3000 Siemens SINUMERIK control with SHOPTURN Right spindle / tailstock Milling spindle with high-pressure coolant Gsdpfsy U Nacox Aixska Automatic tool changer 120 tool positions CAPTO C8 Magazine for 3 boring bars with automatic exchange B-axis prepared for automatic boring bar clamping Hydraulic steady rest K5.1 Ø100–410 mm High-pressure coolant through spindle – 60 bar External coolant system Chip conveyor Automatic door opening Central lubrication Machine status signal lamp Electrical cabinet with air conditioning Prepared for bar feeder USB and Ethernet connection Tool measuring probe Viviport spin windows in doors Technical details: CAPTO C8 system Max boring bar length: 500 mm Max boring bar weight: 12 kg Through hole right spindle: Ø127 mm 10,000 rpm spindle option S1/S6 spindle power: 37/47 kW Spindle torque: 140/180 Nm Machine hours: System power on time: 52,270 h Machine power on time: 49,264 h Automatic cycle time: 9,599 h

Condition: good (used), Year of construction: 1984, total width: 1,325 mm, total length: 3,500 mm, total height: 3,400 mm, overall weight: 6,570 kg, Drilling & Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Quill Ø: 400mm Power: 4kW Max. drill Ø steel: 50mm Gkedpeyrdplsfx Aixea Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table load: 450 kg, overall weight: 4,000 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis KOVOSVIT MAS MCV 750 was manufactured in 2004. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 1000 x 500 mm and a maximum spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the KOVOSVIT MAS MCV 750 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 1000 x 500 mm • Automatic Tool Changer (ATC): 20 positions • Rapid Feed Rate (X/Y/Z): 30 / 30 / 25 m/min Technical Specification Gedsy Eq Rkspfx Aixoka Taper Size ISO 40

Condition: used, functionality: fully functional, Manufacturer: MAS-KOVOSVIT Machine type: Radial drilling machine Condition: used, good technical condition, ready for operation Technical specifications: • Drilling capacity in steel: 80 mm • Drilling capacity in cast iron: 110 mm • Arm length: 4,000 mm • Vertical arm travel: 1,600 mm • Horizontal head travel: 3,470 mm • Spindle taper: Morse 6 • Spindle diameter: 65 mm • Spindle stroke: 475 mm • Spindle speed: 9–1,400 rpm Gksdpfx Aijx Uqcfexsa • Feed rate: 0.035–2.8 mm/rev • Distance spindle nose to table: 710–2,785 mm • Max. workpiece height: 2,785 mm • Drilling diameter range: 80–300 mm • Swing range: 0°–360° • Total power: 13.8 kW • Weight: approx. 19.5 t • Overall dimensions (L×W×H): 6,010 × 1,800 × 5,205 mm Equipment: • 2 worktables Location: Machine in stock in central Poland. Further information available upon request.

Condition: good (used), Copying head, copying head, dividing head -Copy head: for cam discs -Dimensions: 900/400/H270 mm -Weight: 90 kg Gkjdpfx Aijb A Ngkjxsa

Condition: excellent (used), Year of construction: 2004, Control system: Heidenhain Working area Swinging diameter over bed: 320 mm Swinging diameter over carriage: 150 mm Distance between centers: 800 mm Working spindle Spindle mount according to DIN 55027: B6 Spindle bore: 50 mm Spindle taper, metric: 60 Main drive Motor power at speed 1500 min-1: 7 kW Spindle speed range, 1st gear: 0 - 1000 min-1 Spindle speed range, 2nd gear: 20 - 4000 min-1 Max. spindle torque 1st gear: 360 Nm 2nd gear: 90 Nm Gsdpfx Aszdp Txoixoka X-axis Max. travel: 190 mm Rapid traverse: 5000 mm/min Max. feed force: 3000 N Z-axis Max. travel of bed carriage: 750 mm Rapid traverse: 8000 mm/min Max. feed force: 5000 N Quick-change tool holder MULTIFIX B Max. steel diameter: 25 x 25 mm Tailstock Diameter of quill: 65 mm Quill travel: 120 mm Internal taper of quill – Morse: 4 Machine dimensions Length: 2180 mm Width: 1341 mm Height: 1775 mm Machine weight: 2150 kg Power requirement: 21 kVA

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 161, center width: 1,500 mm, center height: 250 mm, spindle speed (max.): 2,400 rpm, controller model: Heidenhain Manual-Plus, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gedpfx Aijzk Dwrjxeka Maximum turning height: 250 mm Turning diameter over bed: 500 mm Turning diameter over slide: 340 mm Distance between centers: 1,500 mm Bed width: 315 mm Spindle bore: 80 mm Spindle speed: 20 - 2,400 rpm MACHINE DETAILS Control system: Heidenhain Manual-Plus Programming: Teach-in Power: 11.0 kW Dimensions & Weight Dimensions (L x W x H): 3,150 x 1,650 x 1,800 mm Net weight: 2,500 kg EQUIPMENT Quick-change tool holder 3-jaw chuck CE marking

Condition: good (used), Manufacturer: MAS Type: VR 4 Gkodpfx Aoh Eigbeixea Reach: 1000mm Without table!

Condition: used, Year of construction: 2000, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, controller manufacturer: Heidenhain TNC426/430, total height: 2,400 mm, total length: 2,600 mm, total width: 3,100 mm, table width: 600 mm, table length: 1,300 mm, overall weight: 5,500 kg, spindle motor power: 28,000 W, X - Travel 1000 mm Y - Travel 450 mm Z - Travel 650 mm Gkjdozimklspfx Aixea Table Length 1300 mm Table Width 600 mm Length 2600 mm Width 3100 mm Height 2400 mm Weight 5500 kg

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Gkjdpfx Ajv Dm Epeixja Stainless Steel 230 Volt Power Supply Price € 3,950

Condition: excellent (used), Swing over bed 320 mm Distance between centers 800 mm Spindle speeds -4000 rpm Control: HEIDENHAIN Manual Plus M Misc. accessories MARCELS MASCHINEN CH Gjdpfx Aiei Ezhqsxjka

Condition: used, Year of construction: 1976, machine/vehicle number: 2791, functionality: fully functional, throat depth: 1,300 mm, drilling capacity: 50 mm, We are selling our radial drilling machine, which is still in use and in working order. Weight approximately 2.5 tons. Will be gladly loaded to the buyer; shipping/transportation costs are borne by the buyer. Gkedpfjwku H Tsx Aixea

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, arm length 2150 mm, drilling capacity 80 mm weight 7000 kg Gedpfsyzq Dpox Aixjka

Condition: used, Year of construction: 2002, x-travel 500 mm y-travel 500 mm z-travel 500 mm Gksdpfxjzgimko Aixea weight of the machine ca. 3800 kg

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m Gsdpstv Iklefx Aixska cube table 500 x 500 x 500 mm

Condition: used, travel distance X-axis: 1,016 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 720 mm, spindle speed (max.): 12,000 rpm, X-AXIS TRAVEL: 1016 MM Y-AXIS TRAVEL: 610 MM Z-AXIS TRAVEL: 700 MM Gkodpsyb Ryvofx Aixea SPINDLE SPEED: 0 - 12,000 RPM TABLE DIMENSIONS: 1300 X 670 MM MAXIMUM LOAD CAPACITY: 1200 KG SPINDLE MOTOR POWER: 21 KW WEIGHT: 10,500 KG DIMENSIONS: 4600 X 3600 X H 3300 MM CNC HEIDENHAIN iTNC 530 ATC 30 PLACES CHIP CONVEYOR INTERNAL AND EXTERNAL COOLANT

Condition: good (used), Year of construction: 2000, machine/vehicle number: 152362081, functionality: fully functional, throat depth: 2,700 mm, spindle diameter: 110 mm, sheet thickness steel (max.): 100 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, Radial drilling machine MAS U 1000 Year of construction 2000 Conventional / digital control With face plate 1,000 mm and tool package Viewing is possible at any time by arrangement. Gkjdpfx Aiorwxpfoxea - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Radial drilling machine MAS | MAS1000 | U1000

Condition: excellent (used), Year of construction: 1999, power: 3 kW (4.08 HP), total width: 1,100 mm, total length: 2,600 mm, total height: 2,200 mm, table width: 800 mm, table length: 1,150 mm, overall weight: 1,800 kg, Radial arm drill MAS - VO 32 MACH-ID 9618 Gksdpfx Aoy Rznwsixja Make: MAS Type: VO 32 Year: 1999 Arm Length: 1000mm Max. drill Ø cast: 40mm Max. tap Ø: 24M Max. drill Ø steel: 32mm Stroke pinole: 250mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Speeds / ranges: 4500Rpm Table Length: 1150mm Table Width: 800mm Power: 3kW Length: 2600mm Width: 1100mm Height: 2200mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!