Used Liebherr Hydraulic Excavator for sale (245)

Condition: used, Year of construction: 2001, machine/vehicle number: 630-8394, Power: 210 kW, operating hours: approx. 9050 h, with additional boom, type: LO4651B, serial no.: 3001335 Nedeyf R A Ejpfx Afcewc

Condition: used, power: 170 kW (231.14 HP), Year of construction: 2017, operating hours: 7,229 h, Equipment: air conditioning, LIEBHERR R936 NLC year 2017, hours 7229, weight kg 33200, kw 170, hammer system, block valves Nwodji Uy Afopfx Afcjc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 15,080 h, Liebherr LH30. Year: 2015. Hours: 15,090. Industrial boom 6.80 m. Industrial stick 5 m with front cylinder. Four outriggers. Solid tires. CE certificate. Good condition. Nwjdjya Iadspfx Afcjc

Condition: used, power: 220 kW (299.12 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 6,203 h, Equipment: air conditioning, Technical information Track width: 70 cm AdBlue system: Yes Make of engine: D936 A7-24 Empty weight: 41.800 kg Identification Serial number: WLHZ1491CZC046988 Other information Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,4x3,45x3,3 Production country: FR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information undercarriage renewed at 5560 hours. Nedpfsymv Upjx Afcjwc

Condition: used, power: 150 kW (203.94 HP), gearing type: automatic, fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 5,500 h, Equipment: air conditioning, Technical information Track width: 71,1 cm Empty weight: 25.000 kg Drivetrain Nwsdpfx Afsymv Ucecjc AdBlue system: Yes Drive: Track Make of engine: D934 A7-04 Functional CE mark: yes Identification Serial number: VAUZ1155CZT015868 Other information EPA Marked: yes Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 7,3x4,03x3,5 Production country: DE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm max. module 22 mm Ring thickness for internal gearing max. 500 Control Siemens 840D table diameter 1500 mm table hole 500 mm Table rpm 3,5 1/min table load 200 kN Stroke length 30-330 mm no. of strokes doubel-strokes per min. 10 - 200 1/min. axis distance 70 ... 1220 mm max. radial velocity 3000 mm/min weight of the machine ca. 38000 kg Equipment/ accessories: - Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm - column increased for axial stroke 1200 mm max. - Shaping head drive power 30 kW - spindle diameter 160mm - max. tool diameter 300mm - max. cutter wheel speed 10 1/min Nwsdpoxylm Hofx Afcoc - Cutting speed 5 ... 45m/min - max. lateral offset 50mm - coolant device coolant tank capacity 2500 l - documentation

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm Nwodpfsw Rf S Eox Afcec max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Year of construction: 2009, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Nwodpfjw Rf R Uox Afcjc Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: good (used), power: 100 kW (135.96 HP), fuel type: diesel, Year of construction: 2014, operating hours: 13,725 h, General information Year of manufacture: 2014 Field of application: Construction Technical information Nwsdpfx Ajycl S Njfcoc Number of cylinders: 4 Empty weight: 23.000 kg Dimensions (LxBxH): 865 x 255 x 316 cm Functional Mast length: 9 m Condition Technical condition: good Visual appearance: good Other information Emissions class: Stage IIIA Additional information Please contact Ferdinand Pater for more information

Condition: good (used), Year of construction: 1982, max. wheel diameter 1250 mm max. module 16 min. module 1 hob turning speeds 25...250 1/min max. width of spur gears 1000 mm milling slide travel 1000 mm weight of the machine ca. 24,5 t Machine type: L 1202 Largest millable module: 16 / DP 1.5 Smallest millable number of teeth: see group 2.07 Largest workpiece diameter: 1250 mm / 49.213" Workpiece table diameter: 1100 mm / 43.307" Part diameter: 987 mm / 38.858" Workpiece table bore: 250 mm / 9.843" Workpiece insertion depth: 525 mm / 20.669" Min. cutter position above table: 390 mm / 15.354" Milling carriage travel: 1000 mm / 39.370" Axial feed: min.: 0.1 mm/rev / 0.0039" max.: 10.0 mm/rev / 0.3937" Radial feed adjustable: min.: 0.10 mm/min / 0.0039" max.: 10.00 mm/min / 0.3937" Milling slide rapid traverse: 800 mm/min / 31.496" Main motor rated power: 2.6 ... 16 kW Nedpfxoynmpto Afcowc Main motor speed: 300 ... 3000 min?¹ Coolant pump capacity: 200 liters / 52.835 US gal. Max. table load: 8000 kg / 17637 lbm Machine weight: approx. 21,000 kg / approx. 46300 lbm Milling cutter head type: 14.4500

Condition: used, fuel type: diesel, first registration: 05/2018, Year of construction: 2017, operating hours: 12,770 h, Used Liebherr L576 X Power wheel loader – total weight 29,000 kg – operating hours 12,776 – engine 215 kW – speed 40 km/h – axle load distribution 15,500 kg – = More information = Unladen weight: 29,000 kg Reference number: 93 For more information, please contact Miguel Cubas. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm. Nedpfx Aeyl Tr Aefcjwc

Condition: good (used), fuel type: diesel, Year of construction: 2014, operating hours: 9,535 h, Year of manufacture: 2014 Field of application: Construction Drive: Wheel CE mark: yes Technical condition: good Nwedsx Dzdvepfx Afcsc Visual appearance: good Serial number: 074209 Please contact Ferdinand Pater for more information

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Nwsdpfx Afoym Nfbocec Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Nwjdpfx Asym Nbcjfcoc Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Njdpsymf Daefx Afcowc Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: used, mileage: 45,700 km, Year of construction: 2005, Drivetrain Drive: Wheel Weights Empty weight: 36.000 kg Functional Lifting capacity: 45.000 kg Identification Serial number: 53517 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Carrier engine: - Upper engine: - Upper hours: 23085 h Counterweight: 7000 Transport dimensions (LxWxH): 11.5x2.7x3.9 Additional information Nwodpjyl Huqefx Afcec Please contact PFEIFER GROUP for more information

Condition: excellent (used), power: 221 kW (300.48 HP), fuel type: diesel, color: other, mast type: telescopic, Year of construction: 2018, operating hours: 7,499 h, Year of manufacture: 2018 Drive: Track Empty weight: 50.500 kg Engine type: Liebherr D936 Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good Drivetrain Internship / Tier: Stage IV / Tier IV final General Country of production: France Condition CE type: CE Nwjdpfx Afow I Htfscoc Liebherr R946 with 27 meter cosben telescopic arm, Standard excavator equipment with hydraulic quick coupler, 2 x digging bucket and hydraulic tilting bucket, Hydraulically lifting cabin, Cameras, CE & Complete documentation available.

Condition: used, Year of construction: 2023, operating hours: 2,130 h, Equipment: all wheel drive, Liebherr Crawler / Crawler Tractor Model PR 726 LGP Nsdpfx Ajyl Hbkofcowc Year of manufacture: 2023 The machine has only 2,130 operating hours and is in like-new condition.

Condition: used, mileage: 53,318 km, lifting height: 110,000 mm, Year of construction: 2018, General information Field of application: Construction Serial number: 088666 Drivetrain Drive: Wheel Weights Empty weight: 60.000 kg Functional Lifting capacity: 250.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Njdpfjwz Ut Iox Afcowc Counterweight: 0 Transport dimensions (LxWxH): 15.86x2.99x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), power: 200 kW (271.92 HP), operation weight: 27,500 kg, Year of construction: 2009, operating hours: 11,796 h, Equipment: air conditioning, Liebherr L576 Year: 2009 Operation hours: 11.796 Hrs ROPS Airco Nwsdpfxexnmz Ie Afcsc back drive camera tyres: 26.5R25 approx 60-70% good bucket with edge engine with 200kW CE / EPA operation weight: 27.5to.

Condition: new, Year of construction: 2017, Liebherr 566 XPower Wheel Loader • 13,309 operating hours • Own weight 23.9 tons • Travel speed 40 km/h • Engine power 200 kW (272 HP) • Transport height 3,590 mm • Tire size 26.5 R25 (50%) • Outer turning radius 7,340 mm • Bucket width 3,000 mm • Bucket capacity 4.2 m³ • Automatic central lubrication Nwsdpjyk U Dqjfx Afcoc • Integrated weighing system • Overpressure cabin system Condition: New Year of manufacture: 2017

Condition: used, mileage: 67,400 km, lifting height: 59,100 mm, Year of construction: 2018, General information Field of application: Construction Serial number: 076646 Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Nwjdpfx Afjtr Nuqjcsc Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Upper engine: Perkins Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 159,620 km, Year of construction: 2006, operating hours: 28,594 h, General information Field of application: Construction Serial number: 53304 Drivetrain Drive: Wheel Weights Empty weight: 36.000 kg Functional Lifting capacity: 45.000 kg Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Carrier engine: - Upper engine: - Upper hours: 16348 h Counterweight: 0 Transport dimensions (LxWxH): 11.5x2.7x3.9 Additional information Please contact PFEIFER GROUP for more information Nodpjylgxvjfx Afcowc

Condition: used, Year of construction: 2017, operating hours: 8,340 h, Beautiful machine - Well equipped - No play in the joints - No oil leaks! VIN: VATZ1265CZB044737 Year of manufacture: 2017 Original operating hours: 8,350 hours Liebherr dealer maintained Special factory paint RAL 1027 curry yellow 4-cylinder inline engine, water-cooled with turbocharging, 103 hp Hydrostatic travel drive with 2 speed ranges – max. 32 km/h * Standard Z-bar linkage * Ride control / boom suspension * Hydraulic quick coupler with installation kit * Liebherr factory-installed central lubrication system * 3rd hydraulic control circuit for high-tip / grab bucket / or 4-in-1 bucket * Steel lamp brackets instead of plastic Nwedpfx Afoyl Tfpococ * Rear tow hitch * "Comfort" suspended driver’s seat * Comfort radio * 2 LED work lights at rear of cab roof * 2 LED work lights at front of cab roof * Adjustable steering column * Rotating beacon / warning strobe on the center of the cab roof * Crane / lashing eyes at rear and front frame * Fire extinguisher * Road approval 32 km/h Tires 17.5 x 25 L3, front axle: 2 tires, 95% tread, like new!! Tires 17.5 x 25 L3, rear axle: 2 tires, 95% tread, like new!!! Permissible total weight approx. 10,500 kg Operating weight approx. 8,500 kg Offer includes quick coupler and 1.6 cbm standard bucket – Price: €46,900 net (export), plus 19% VAT for domestic sales Optional attachments at additional cost: · Folding bucket 2 cubic meters from €3,550 · High-tip bucket · Screening / mixing bucket, manufacturer "Wolf" · 5-ton pallet fork from €2,190 Prices net plus VAT or for export Sale only to businesses or for export. Sale in as-is condition. No guarantee or warranty. The indicated operating hours or kilometer readings are taken from the hour or odometer counter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not represent a binding offer and the details provided should not be regarded as warranted characteristics. The description and information serve only for general identification of the vehicle and do not constitute a legal warranty. Information is not guaranteed to be complete. Any details/descriptions and images are non-binding and do not represent assured properties. Only the stipulations in the order confirmation and invoice are binding. The seller assumes no liability or warranty. The advertisement may contain typing or data transmission errors. The seller has not inspected the machine. Equipment needs to be checked separately if necessary. We gladly accept your vehicle as a trade-in. For further questions, please contact us. For our international customers, we can prepare all customs and export documents for smooth transfer abroad.

Condition: ready for operation (used), LIEBHERR - LORENZ S800 / Gear Hobbing Machine - Well-maintained machine with extensive accessories - 1x pallet / change gears - 1x pallet / hobs - 1x pallet / arbors - DOCUMENTATION - Max. workpiece length with tailstock 600 mm - Max. workpiece length with retracted tailstock 800 mm - Max. traverse of milling slide 360 mm - Maximum pitch cut on largest workpiece 5 PI / in standard range 8 PI - Spindle taper – milling spindle MK 5 - Milling arbors 22 / 27 / 32 / 40 mm - Max. milling diameter 186 mm - Max. milling cutter length 170 mm - Max. cutter shift 80 mm - Milling speeds 40 – 220 rpm - Infinitely variable feed rates / horizontal - Infinitely variable feed rates / vertical - Infinitely variable feed rates / tangential - Clamping table without coolant trough 550 mm Nwsdpfsyl Slhjx Afcec - Clamping table bore 100 mm - Arbor taper MK 5 Dimensions (LxWxH): 3.6 x 1.8 x 1.9 meters / Weight: 5,000 kg Errors and omissions excepted.