Used Lisec Lbh-25V for sale (71)

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 102.35.99.02-0295, total length: 3,000 mm, total width: 800 mm, total height: 1,500 mm, input voltage: 380 V, overall weight: 740 kg, power: 3.4 kW (4.62 HP), Lisec manual butylextruder SN:102.35.99.02-0295 3,4Kw-380V-50Hz-7bar - 740Kg Pjlhevhc Izoccqnsgk

Condition: refurbished (used), Year of construction: 1996, Functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, overall weight: 850 kg, Manual Lisec butyl extruder LBH-25V, year of manufacture 1996, butyl storage for 2 x 7,5 kg, for application of profile widths from 6-24 mm, technically and optically completely overhauled in 2024, perfect condition Currently still being overhauled, availability in approx. 3-4 weeks after completion, EXW Oroshaza/Hungary Pgjlhccqsryr Azjnek Please note: the photos shown are sample photos from our last overhaul of the same type. The delivered butyl extruder will look almost identical after the overhaul

Condition: good (used), Year of construction: 2003, Functionality: fully functional, overall weight: 2,450 kg, type of input current: three-phase, power: 7 kW (9.52 HP), automatic Lisec butyl application machine LBH-25AS, additionally to standard frames also useable for Georgian bar frames, consisting of: - RFVS-25/25, inlet conveyor - LBH-25AS, automatic butyl application machine - RAVS-25/25, automatic frame lift - FRS-25A, automatic overhead frame conveyor As a completion to a full automatic spacer frame butyl application line we also have following machines available: Pslhort Ipdeccqnegk - RFVS-25/25U, inclination changer from +6° to -6° - A2RL-25/25RN, year 2001, full automatic desiccant filling machine for profiles with 6-24 mm width All machines are available from our stock and can be seen in our warehouse in Hofkirchen/Austria

Condition: good (used), Year of construction: 2002, automatic Lisec butyl application machine, left to right, year 2002, consisting of: FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device LBH-25AR, automatic butyl application machine, 2x7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift (up to overhead frame conveyor) FRS-25A, overhead frame conveyor down to frame set section The machine is available end of May from current place in Belgium The machine is still in operation and can be seen on site on appointment. Pjlhccqetpgupsnjgk

Condition: good (used), Year of construction: 2002, Functionality: fully functional, automatic Lisec butyl application machine, left to right, year 2002, consisting of: Pslhccqorx Ryfenegk FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device LBH-25AR, automatic butyl application machine, 2x7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift FRS-25A, overhead frame conveyor down to frame set section The machine is available from our stock in Hofkirchen/Austria. The machine can be seen on site on appointment.

Condition: used, Lisec Cutting Table GFB Pelhcewfgxqecqnsgk Please check our website for machine specification Location: This lot is located in Swansea, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2007, Functionality: fully functional, input voltage: 400 V, type of input current: AC, Lisec gas filling press for maximum unit sizes of 3500 x 2500 mm, year 2007, consisting of: RSVN-35/25, frame set section, year 2007 RTVB-15/25ST, extension conveyor for measuring section, year 2007 Pjljwca Hpshccqnegk RTVB-15/25MZU2, measuring section for gas filling press, year 2007 FPS-35/25U2, gas filling press for Argon, year 2007 RTVB-15/25ST, press outlet conveyor, year 2007 UKL-35/25, tilt table, year 2007

Condition: used, Year of construction: 2011, Functionality: fully functional, overall weight: 5,520 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, Lisec tiltable glass cutting machine for float. 5520Kg - 8bar - Max 33kg/m² 400V-50Hz-40.19kVA Full load amp: 58A Pgelewfhdbjhccqnjk

Condition: excellent (used), LiSEC TAL is a hydraulic sealant applicator for two-component materials, with an adjustable mixing ratio, which is used for the production of insulating glass. Customs tariff number for 2K extruder: 84772000 Polev Epfzjhccqnegk S-IGL-1862 / - Online - / Lisec / TAL 50 PU / to be reconditioned / GMR Stock S-IGL-2329 / - Online - / Lisec / TAL-60 SI/N / Construction Year: / TAL 60 SI TAL 60 PS / GMR Stock

Condition: used, • Molecular Filling Machine • Type – A4 AL Pslhjwc Rqroccqnsgk • Machine No. – 1203150480494 • Year of Manufacture – 1994 • Weight – 71 kg • Price upon request

Condition: excellent (used), Functionality: fully functional, total length: 31,320 mm, input voltage: 400 V, Equipment: documentation/manual, IInsulation glass production line for Low-E glass LiSEC – Austria, h=2.5 m Max. glass dimensions 2500 x 3500 mm Max. thickness of the glass unit 60 mm The line can make shapes. In very good technical condition. The washer-dryer has been completely overhauled, and the other machines have been revised by LiSEC in 2022. Inspection during production is possible by appointment. 1. RTV, L=1600 mm, inlet conveyor, 2. RTV, L=1600 mm, inlet conveyor for washer, 3. VHW-25V-8, L=3380 mm, washing and drying machine, 8 brushes, ’91, overhauled in 2022, 4. RTV, L=1100 mm, exit conveyor for washer, 5. RSV, L=3920 mm, mounting station for spacer frames, 6. RTV, L=2730 mm, inlet conveyor for gas press, ’97, 7. FPS-35/25U, L=4050 mm, gas filling press, 8. RTV, L=1100 mm, exit conveyor for press, 9. RTV, L=1100 mm, exit conveyor for press, Polhceuby A Rjcqnsgk 10. RTV, L=1100 mm, exit conveyor for press, 11. RTV, L=1600 mm, inlet conveyor for robot, 12. RTVB-15/25VFE, L=1600 mm, inlet conveyor for robot, 2010 13. VFL-1N/25 + DOS-1PU, L=6200 mm, automatic sealing system / robot with dosing unit, year: 2010.

Condition: used, Lisec KSR. See our website for specification Pelhccswfg A Njqnogk Location: This lot is located in Port Talbot, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, working height: 520 mm, input voltage: 400 V, type of input current: AC, Lisec IG line for maximum unit sizes of 3500 x 2500 mm, consisting of following machines: RTVB-32/2WE, washing machine inlet conveyor, year 2007 RTL-25VN, glass washing machine with 6 brushes for low-e, 1 hot water tank, 1 sand filter, and blower, year 2007 RTVB-16/25ST, washing machine outlet conveyor, year 2007 RSVN-35/25, frame set section, year 2007 RTVB-15/25ST, extension conveyor for measuring section, year 2007 RTVB-15/25MZU2, measuring section for gas filling press, year 2007 Pgelhccewbqdcsqnek FPS-35/25U2, gas filling press for Argon, year 2007 RTVB-15/25ST, press outlet conveyor, year 2007 UKL-35/25, tilt table, year 2007 As an option a sealing robot for maximum unit sizes of 3500 x 2000 mm would be available: RTVN-15/20VFE, sealing robot inlet conveyor, year 2003 VL-1/20, automatic sealing machine for double and triple glass units, year 2003 DOS-1PTH, mix and metering station for PS, 200 litre base material and 20 litre for catalyst, year 2003 KHB-30, freezing unit, year 2007 The machines are in good working order and would be available within 4-6 weeks from order.

Condition: good (used), Year of construction: 2000, Functionality: fully functional, Lisec Mascina composed of: Insertion of glass Washing machine with lowe brushes Glass overview The press is filled with argon Pgslhccjwb U Rmeqnek Boiling table

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, Functionality: fully functional, working height: 3,000 mm, Lisec RTVB15/30 VFE Lisec VFL1F50/29 Lisec DOS-E Sealing insulating glass units with two-component sealants, fully automatic Pgolhcsvuhgiscqnek Full support belt system Left-Right can be offered with complete line including washer, assembling station and gas press.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 006-009-725, total width: 6,000 mm, total length: 9,500 mm, overall weight: 21,500 kg, input voltage: 400 V, input frequency: 50 Hz, 16 positions storage for Jumbo sheets: 6000x3300mm 2x 20Ton 640 pads 14x10Ton 340pads Pslhccqsv Td D Uenogk Tested as standalone or can be connected to a PKL system

Condition: good (used), Year of construction: 2004, Functionality: fully functional, type of input current: AC, input voltage: 415 V, input frequency: 50 Hz, Equipment: documentation/manual, Float Glass Cutting Line (Low-E) LiSEC – ATH-37/26D, ESL-37/26RS-S, BTS-37/33 Construction year: 2004 Pgelhcev Hqlfecqnjk Max. glass size: 3700 x 2600 mm - ATH-37/26D, Movable Double Sided Glass Loader for 6 glass positions (3 x 2), 6 pcs glass racks included - ESL-37/26RS-S, Edge Deletion and Cutting Machine for Low-E Coated Glass Sheets - BTS-37/33, Float Glass Breaking Table In good working condition. Inspection during production is possible by appointment. Available: March 2025

Condition: used, Cutting Table Lisec ESL +ATH loader Pelhccqewfg Avjnjgk Location: This lot is located in Port Talbot, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Functionality: fully functional, Lisec IG-line for double and triple glass units up to 2500 x 1600 mm, year 1993 - 1999, consisting of: RTV-38/16WE, washing machine inlet conveyor, 1993 VHW-16V8, glass washing machine with 8 brushes for low-e, 2 hot water tanks, 2 sand filters, and blower, 1993 RTVB-16/16ST, washing machine outlet conveyor, 1997 Sofsolution LineScanner RTVB-11/16 ST, inlet conveyor frame set, 1997 RSVB-27/16, frame set section, 1997 RTVB-27/16MZ, measuring section for gas filling press, 1997 FPS-25/16U, gas filling press for Argon, 1997 RTVB-22/16ST, press outlet conveyor 1, 1997 Pgsljr H Dpmohccqnek RTVB-22/16ST, press outlet conveyor 2, 1997 RTVB-27/16ST, press outlet conveyor 3, 1997 RTVB-11/16, inlet conveyor for cork applicator, 1997 APK-3/16, automatic cork application device, 1997 RTVB-11/16, outlet conveyor for cork applicator, 1997 RTVB-11/16VE, inlet conveyor sealing robot, 1999 VL-1N/16, automatic sealing machine for double and triple glass units, 1999 VLA-25, VL-extension with corner correction rollers, 1999 DOS-1/PU, mix and metering station for PU, 1999 The line is in good codition and is available from our stock in Hofkirchen/Austria

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, Double side loader for cutting line 6 positions Pjlhccjvuhn Hjqnsgk

Condition: ready for operation (used), Year of construction: 2000, Functionality: unexamined, machine/vehicle number: 520-003956, Lisec spacer bender Printer for spacers not available Pgolhcsvktytscqnek

Condition: used, Year of construction: 2011, Functionality: fully functional, Lisec FPS-25/20U2 2011 Lisec gaz press 2000 x 2500 mm R-L Pgslhcovy Ef Hocqnek S-IGL-1892

Condition: used, Year of construction: 1993, machine/vehicle number: 121.23.90.02.0493, Lisec filling station A1RL Pgslhcjrxcvlecqnek

Condition: used, Year of construction: 2007, Functionality: fully functional, S-VAE-057 L-R 3000 X 5900 MM Lisec KSR 30 max glass units 3000 x 5900 mm min 180 x 350 mm 2.3 mm - 19 mm shape possible Pgjlhorr S I Hoccqnsk Model Function

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, overall weight: 11,500 kg, input current: 60 A, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, BSK-60/30 RE-S: loading, float cutting and Low-e grinding (5520Kg-75.84KVA-109.6A-400V-50Hz-8bar. VB-60: Laminated glass cutting up to 12/12 with booster option (3430Kg-26,30KVA-400V-50Hz-8bar) BTS-60/30: Unloading table Pgelhccevc D Aisqnek