Used Matsuura Lumex Avance-25 for sale (48)

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand FANUC B2Dfeicos Model 31i Model B Main Drive Spindle speed range 450-45000 Spindle bore 25 mm Number of axis 3 Movement X-Axis Movement 260 mm Y-Axis Movement 260 mm Z-Axis Movement 100 mm Tools Slots in storage 20 Max weight 0,5 kg Max tool diameter 10 mm This Matsuura Lumex Avance-25 3D Printer was manufactured in the year 2018 in Japan. It is equipped with a Fanuc 31i Model B control unit and has 3 axis. The machine has a spindle speed of 450-45000 rpm. Application Types 3D Printing

Condition: good (used), Year of construction: 2007, 5-axis machining center Lf80Gomd Manufacturer: Matsuura Type: MAM 72-25 V Year of manufacture: 2007 CNC control: Fanuc G-Tech 30i Travel paths: X/Y/Z: 550 x 410 x 450 mm Table size: Ø 130 mm Spindle: 15,000 rpm Pallet changer: 10-way Tool magazine: 60-way Knoll high-pressure system Internal cooling 70 bar 140125ä

Year of construction: 2011, Condition: excellent (used), 5 axes machining center FANUC G-Tech 30i Working travels 550x410x450mm B-Axis table +/- 110° A-Axis table 360° Bupygni2Co Spindle taper BT40 Big Plus Spindle speeds -15000 rpm Tool changer 40 pos Palett places 2x Durchmesser 250mm Coolant through spindle 3D measuring probe Tool measuring device Paletts no 15 Tool holders approx 80x KNOLL / TURBO coolant device MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2007, operating hours: 66,989 h, Functionality: fully functional, machine/vehicle number: 17224, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 30, swivel angle B-axis (min.): -110 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Control: MATSUURA G-Tech 30i FANUC 30i MA, 5-axis simultaneous machining X-axis travel: 550 mm Y-axis travel: 410 mm Z-axis travel: 450 mm B-axis travel: +110° to -110° C-axis travel: 360° Distance table surface - spindle nose: -10 mm to +440 mm Distance B-axis - spindle nose: -40 mm to +410 mm Distance B-axis - table surface: -30 mm Distance table center - X-axis end position (B-axis in zero position): 265 mm Distance table center - Y-axis end position (B-axis in zero position): 180 mm Distance floor - table surface (B-axis in zero position): 945 mm Work surface: Ø170 mm Max. Workpiece size: Ø250 mm x 250 mm height Table load: max. 40 kg Table surface: 4 radial T-slots (90° pitch, 12 mm width) Table indexing B and C axes: 0.001° Table indexing time B-axis 90°: 1.2 s Table indexing time C-axis 90°: 0.9 s Holding torque B-axis: 1,112 Nm Holding torque C-axis: 500 Nm Torque B-axis: 1,070 Nm Torque C-axis: 192 Nm Spindle speed range: 50 - 15,000 rpm Spindle mount: BT 40 JIS B 6339 Big+ Pull stud: BT 40 JIS B 6339 40P Inner diameter of spindle bearing: 70 mm Spindle motor power: 7.5/5.5 kW Max. Spindle torque: 65.1 Nm up to 1,100 rpm Rapid traverse X-, Y-, Z-axis: 50,000 mm/min Rapid traverse B-axis: 30 rpm Rapid traverse C-axis: 50 rpm Feed X-, Y-, Z-axis: 1 - 50,000 mm/min Min. feed increment X-, Y-, Z-axis: 0.001 mm Min. feed increment B-, C-axis: 0.001° Number of tools in the magazine: 40 Max. Tool weight: 10 kg Max. Tool diameter (full load): Ø96 mm Max. Tool diameter (free neighboring stations): Ø150 mm Max. Tool length: 300 mm Tool change time (5 kg): 1.1 s Chip-to-chip time (5 kg): 4.1 s MACHINE DETAILS Machine height: 2,705 mm Machine width: 2,281 mm Machine depth: 3,665 mm Machine weight: 8,600 kg Total connected load: 32 kVA Supply voltage: 3 x 400 V, 50 Hz Compressed air connection: 5.5 - 9.5 bar Compressed air consumption: max. 1,000 l/min (at 20,000 rpm) EQUIPMENT - Tool changer with 30 stations (chain) - Complete full casing - Spindle (50 - 15,000 rpm), grease lubricated - Spindle blow-out - Electric spindle orientation - Spindle oil cooler and spindle overload protection - Air nozzle on headstock, switchable via M function Uttfkor2Yp - 2 spiral chip conveyors - Coolant tank with standard coolant pump - Rotary encoder for B and C axes - Work area light - Control panel with 10.4" color screen - Power on/off timer - Ethernet interface for program data transfer - Machine design in accordance with European safety requirements

Year of construction: 2002, Condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges Obymoo8Zj 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, Matsuura H-Plus 300 Multi Pallet Changing CNC Horizontal Machining Centre With Matsuura G-Tech 30i Control Oot8Kzalm Table Dimension 300 x 300mm. Maximum Table Load 250kg. Maximum Component Dimension Ø530mm x H760mm. Axis Travel 'X'=500mm, 'Y'=500mm, 'Z'=500mm, 'B'=0-360°. Rapid Traverse 'XYZ'=60,000mm/min, 'B'= 100rpm. Spindle Speed Range 50-15,000rpm (15kW Motor). Spindle Taper BT50. 150 Position ATC. Maximum Tool Ø90mm (Ø150mm No Adjacent Tool), Maximum Tool Length 300mm, Maximum Tool Weight 8kg. S/No. 16950. With Dual Auger To FSE Chip Conveyor, FSE Through Coolant High Pressure Filtration System, Renishaw NC4 Laser Tool Setter, Renishaw Spindle Probe Interface, Daikin Inverter Chiller, FilterMist FX 4000 Mist Extraction Unit, TK2 Visiport Sport Window, Oil Skimmer & Signal Tower & Handwheel. Weight 8,300kg.

Condition: good (used), Year of construction: 2003, Machining center Manufacturer: Matsuura Type: H Plus 405 PC6 Year of manufacture: 2003 CNC control: Fanuc G-Tech 16i Travel paths: X/Y/Z: 600 x 600 x 600 mm Table size: 500 x 500 mm 6-way pallet changer Tool magazine: 120-way 4th axis Knoll high-pressure system Internal cooling 70 bar 140125ä Lhcstrp2

Condition: used, Year of construction: 2013, Matsuura H Plus-300 Year of manuf. : 2013 Control : Fanuc 30iM Movement X/Y/Z : 500/560/500 mm Tool holder : BT40 _____ Description: Spindle: Speed:15.000 rpm Power:15 kW Torque:119 Nm Taper:BT40 NC-Roundtable: B-Axis:0,001° Palletsize:300 x 300 mm Tableloading (max.):250 kg Workpiecesize (max.):ø530 x 760 mm In general: Toolmagazine:71 stations Rapidtravers in X/Y/Z:60 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure, 70 bar Workpiecemeasurement:Touchprobe, Renishaw OMP60 Dpfw3V Toolbreakagecontrol:Mechanical Automation:Palletchanger, 2 stations Further Accessory:Trafo, rinsing pistol

Condition: excellent (used), Year of construction: 2008, CNC vertical 5-axis machining center MATSUURA Dpbx9D Type: MAM 72-42 V year of construction 2008 Control: FANUC 30i Traverse path X-axis mm 550 Y-axis travel mm 440 Z-axis travel mm 580 Spindle holder SK 40 BigPlus Spindle speed rpm 12,000 Spindle motor kW 11 Tool magazine 180 Plate changer 2 pallets Pallet size mm 300 x 300 Accessories Tool magazine for 120 tools, plate changer with 2 pallets, scraper conveyor chip conveyor, Knoll coolant system KF400 High-pressure coolant system through the spindle, IKZ spindle, IKZ 70 bar, coolant shower, HSC precision control for simultaneous 5-axis machining, data server machining, data server,

Condition: good (used), Year of construction: 1997, Matsuura RA-III Vertical Machining Center Manufacturer: Matsuura Model: RA-III S/N: Year: 1990 Condition: Good Specifications: Approximate Machine Age: 1990 Table Size: 31.50" x 16.50" Pallet Load 660 LBS Pallet Change Time 8 SEC. X-Axis Table Travel: 29.92" Y-Axis Saddle Travel: 17.30" Z-Axis Spindle Head Travel: 19.15" Maximum Distance Spindle To Table: 5.70"-24.90" Rapid Traverse Rate: X & Y 945 Z Axis 708 IPM Spindle Taper: BT-40 Spindle Speeds: 30-8000 RPM Spindle Drive Motor: 20 HP Automatic Tool Changer: 30 Positions Maximum Tool Diameter: 6.8" Maximum Tool Length: 13.7" Cf88Cnha3K Maximum Tool Weight: 22 LBS Tool Change time 2 SEC. Approximate Dimensions: 171" x 122" x 119" Machine Weight 14,740 LBS Equipped With: EQUIPPED WITH: Matsuura Yasnac MX- CNC Control 2-APC Automatic Pallet Changer 30-Position ATC Full Enclosure All Available Manuals MACHINE HAVE RUN PLASTIC 85 % OF THEIR LIFE

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 5500 mm Measurements depth 4300 mm Measurements height 2600 mm Machine weight 10000 kg Control Unit Model GTECH 16-1 Brand MATSUURA Main Drive Number of axis 4 Movement X-Axis Movement 660 mm Y-Axis Movement 660 mm Z-Axis Movement 500 mm B-Axis Movement 360° Additional Equipment The spindle was completely overhauled 120 tool changing stations Changing table IKZ The new spindle was installed in the 2005 machine. Optional tools available This 3-axis Matsuura H PLUS-405 horizontal machining center was manufactured in 2005. It features a MATSUURA-GTECH 16-1 control system, a robust 120 tool changing station, and a changing table. With travels of X 660 mm, Y 660 mm, and Z 500 mm, it offers ample working space. Dimensions are 5500 x 4300 x 2600 mm, and it weighs 10 tons. For more information about this horizontal machining center, please reach out to us. Application Types Milling Dqtwdn

Condition: good (used), Year of construction: 2003, Matsuura H-Plus 630 Twin Pallet CNC Horizontal Machining Centre with Matsuura G-Tech16i Control Table Dimension 630 x 630mm. Maximum Table Load 1,200kg. Maximum Component Dimension Ø1,050mm x H850mm. Axis Travel 'X'=1,050mm, 'Y'=920mm, 'Z'=950mm, 'B'=0-360°. Rapid Traverse 'XYZ'=60,000mm/min, 'B'= 75rpm. Maximum Spindle Speed Range 45-12,000rpm (30kW Motor). Spindle Taper BT50. 60 Position ATC. Maximum Tool Ø100mm (Ø320mm Non Adjacent) Maximum Tool Length 600mm, Maximum Tool Weight 20kg. S/No. 030815507. With Dual Auger To FSE Chip Conveyor, FSE Through Coolant High Pressure Filtration System, Renishaw NC4 Laser Tool Setter, Renishaw Spindle Probe Interface, Oilmatic C1500 Oil Chiller, FilterMist FX 6002 Mist Extraction Unit, Kuroda Air Dryer, & Signal Tower & Handwheel. Weight 21,000kg. Dqv7St

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Dqtrf7 Video of machine in operation available

Condition: used, Year of construction: 1986, x-travel 1050 mm y-travel 560 mm z-travel 560 mm Control Fanuc15M table-size 1400x560 mm Chcoih92 table load 1500 kg spindle drive - main spindle 11/15 kW spindle turning speed - stepless 15-4500 U/min max. torque on the working spindle 613 Nm feed speeds 1-5000 mm/min number of tools BT50 tool changer 30 Werkzeuge coolant total power requirement 35 kVA weight of the machine ca. 9 t dimensions of the machine ca. 5x4,3x3 m

Condition: good (used), Year of construction: 1996, Functionality: fully functional, WE OFFER AN GOOD CONDITION MATSUURA WITH 4 TH AND 5TH AXIS. MACHINE WAS WORKING IN ROLLS ROYCE FROM NEW. AND WAS ALL TIME GREAT MAINTAINED. Description MACHINE WAS WORKING IN ROLLS ROYCE FROM A NEW AND IS GREAT MANTAINED HAS NEW BATTERIES, BACKUP will be present on key and email. WITH 4 TH AND 5 TH AXIS FIRST TIME IN USE 1996 mfg : : MATSUURA mpn MC-800VF Matsuura MC-800VF : ManufacturerMATSUURAModelMC-800VF 3+2 AXIS Year1995 ConditionUsed Brand MATSUURA ControlCNC (Yasnac i80 CNC control) Dqumgj Table1200mm x 400mm Power15 hp Rpm 8000 rpm Atc 30 TaperBT40 Axis3+2 Weight APROX 7000 KG TravelsX = 800mm, Y = 440mm, Z = 485mm Specifications Manufacturer MATSUURA Model MC-800VF 5 AXIS Year 1995 Condition Used Brand MATSUURA Control CNC (Yasnac i80 CNC control) Table 1200mm x 400mm Power 15 hp Rpm 8000 rpm Atc 30 Taper BT40 Axis 3+2 Weight APROX 7000 KG Travels X = 800mm, Y = 440mm, Z = 485mm

Year of construction: 2004, Condition: good (used), Traverses X Y Z; 680 x 394 x 625mm, B axis -110/+ 65 degrees, C axis 0.001 degrees, pallet diameter 130mm, maximum workpiece diameter 300mm, maximum workpiece height 250mm, number of pallets 40, spindle taper BT40, 240 Station ATC, spindle speed 12000rpm, Fanuc G-Tech 16I control, Dmx3W3U3V through spindle coolant, and swarf conveyor.

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 660 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: SIEMENS, controller model: 840Di, workpiece height (max.): 850 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 400 kg, table width: 500 mm, table length: 500 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 360, tool length: 350 mm, tool weight: 10,000 g, CNC controller: SIEMENS 840Di Axes X-axis travel mm: 660 Y-axis travel mm: 660 Z-axis travel mm: 660 B-axis degrees: 360º (0,001º) Feed rates m/min: 60 Rapid traverse m/min: 60 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø700x850 Max. workpiece weight kg: 400 Spindle Spindle speed rpm: 40 - 12.000 Cooling Cooling through the Spindle Center bar: 70 Tank capacity: 1.400 Tool system Tool holder: SK-40 Big+ Tool magazine slots: 360 Max. Tool Diameter With free neighboring places mm: ø150 With occupied neighboring places mm: ø80 Max. Tool Length mm: 350 Max tool weight kg: 10 Equipment Electronic Handwheel Chip conveyor Infrared probe (RENISHAW OMP60) Rotating inspection windows Rinsing gun blowing air through spindle center Signal lamp E2Pljme High pressure pump Tool breakage probe Mist collector Blowing air outside the spindle Direct measuring system XYZ Arrangement for external pallet management Working coordinate systems (99) Precision NC rotary table, rapid traverse and feed rate 100 1/min incl. direct measuring system Machine interface for FASTEMS system

Condition: good (used), Year of construction: 2010, Tool magazine defective, only every 2 slots usable, Matsuura Cublex 63 / PC2, year of manufacture 2010, Siemens 840 DI control system, travel X/Y/Z 760/845/660 mm, A axis +30/-120°, C axis 360°, Renishaw OMP 60, Blum Laser, Ww 160 times expandable to 320 places, Spindle speed up to 12,000 rpm, HSK 63, 2-fold pallet Pallet size 500 mm, 3 square pallets, 2 round pallets for turning operations, IKZ, Flies filter, IPC - selectable acceleration for HSC machining, Cnhrnn2G3A HSC precision additional software for 5-axis simultaneous machining,

Year of construction: 2004, Condition: good (used), Table size 500 x 500 mm Longitudinal travel 600 mm Cross travel 600 mm Vertical travel 600 mm Max. load on table 400 Kg Spindle speeds 40 - 12.000 rpm Tool change 50 pcs Huv72Ic Spindle taper ISA 40 Control FANUC G Tech 16i Timer, machine on 51.000 Timer Cycle hours 14.700 Timer

Condition: excellent (used), Year of construction: 2005, Model: H PLUS-405 Year of construction: 2005 General data Dimensions width 5500 mm Dimensions depth 4300 mm Dimensions height 2600 mm Weight of the machine 10000 kg Control unit Model GTECH 16-1 Brand MATSUURA Main drive Number of axes 4 Movement X-axis travel 660 mm Y-axis movement 660 mm Z-axis movement 500 mm B-axis movement 360° Additional equipment The spindle has been completely overhauled 120 tool changing stations Cezihimkv0 Changing table IKZ The new spindle was installed in the 2005 machine. Optional tools available This Matsuura H PLUS-405 3-axis horizontal machining center was manufactured in 2005. It has a MATSUURA-GTECH 16-1 control, a robust 120 tool changing station and a shuttle table. With travels of X 660 mm, Y 660 mm and Z 500 mm, it offers ample working space. The dimensions are 5500 x 4300 x 2600 mm and the weight is 10 tons.

Condition: good (used), Year of construction: 2001, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 485 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 30 m/min, controller model: Yasnac, spindle speed (max.): 15,000 rpm, coolant supply: 50 bar, number of spindles: 1, number of slots in tool magazine: 80, Equipment: documentation/manual, You are bidding on a used Matsuura MC 660 VG machine tool Special accessories: Rotary table Lehmann T1-420420.22AA M&H load cell Hydraulic vice (see pictures) Dqled7 Pneumatic support (see pictures) Electrostatic suction unit IFE 2000 (see pictures)

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 132 h, Functionality: fully functional, machine/vehicle number: 20731, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, nominal power (apparent): 35 kVA, controller manufacturer: Fanuc 31I, spindle speed (max.): 42,000 rpm, operating hours of spindle: 132 h, coolant supply: 20 bar, spindle motor power: 15 W, spindle nose: HSK E40, input voltage: 415 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The Machine is in perfect condition. Machining accuracy is +/-0.0015mm. (measured with zeiss micura) The machine is equipped with Renishaw OMP400 and BLUM Pico for workpiece and tool measuring. Repeating accuracy is +/-0.001 High speed and high accuracy option on Fanuc. Dqn3Px The Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 5500 mm Measurements depth 4300 mm Measurements height 2600 mm Machine weight 10000 kg Dqjvzd Control Unit Model GTECH-16-1 Brand MATSUURA Main Drive Number of axis 3 Movement X-Axis Movement 660 mm Y-Axis Movement 660 mm Z-Axis Movement 500 mm Additional Equipment 120 tool changing stations IKZ Optional tools available This 3-axis Matsuura H PLUS-405 horizontal machining center was manufactured in 2004. It features a MATSUURA-GTECH-16-1 control unit, X/Y/Z travels of 660/660/500 mm, and 120 tool changing stations. Dimensions are 5500 x 4300 x 2600 mm with a weight of 10 tons. A great opportunity to buy this Matsuura H PLUS-405 horizontal machining center. Contact us for further details regarding this horizontal machining center. Application Types Milling

Condition: excellent (used), Year of construction: 1998, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, controller manufacturer: Yasnac, total length: 2,350 mm, total width: 3,440 mm, table width: 800 mm, table length: 400 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, CNC controller: Yasnac Axes X-axis travel mm: 800 Y-axis travel mm: 400 Z-axis travel mm: 400 Rapid traverse m/min: 36 Worktable Table dimensions mm: 800 x 400 Spindle 2Jxlfkv Spindle speed rpm: 10.000 Tool system Tool holder: BT-40 Tool magazine slots: 20 Equipment Chip conveyor High pressure pump Rated power kVA: 58 Basic machine dimensions / weight Length mm: 2.355 Width mm: 3.447

Condition: excellent (used), Year of construction: 2004, Model: H PLUS-405 Year of construction: 2004 General data Dimensions Width 5500 mm Bsdbajpzx7O Dimensions depth 4300 mm Dimensions height 2600 mm Weight of the machine 10000 kg Control unit Model GTECH-16-1 Brand MATSUURA Main drive Number of axles 3 Movement X-axis travel 660 mm Y-axis movement 660 mm Z-axis movement 500 mm Additional equipment 120 tool changing stations IKZ This Matsuura H PLUS-405 3-axis horizontal machining center was manufactured in 2004. Cezhjowyfq It has a MATSUURA GTECH 16-1 control, X/Y/Z travels of 660/660/500 mm and 120 tool changing stations. The dimensions are 5500 x 4300 x 2600 mm with a weight of 10 tons