Used Metallkraft Hmbs 400 Cnc for sale (59)

Condition: good (used), Year of construction: 2020, 1 used column-guided CNC bandsawing machine manufactured by Metallkraft, type HMBS 400 CNC, serial no. 4101602085F, Year 2020, control system, Mitsubishi Elektrik, type GOT 2000 Technical data: Cutting ranges 0° round (tube) 400 mm 0° round (solid material) 400 mm Rvvhrfe2Ur 0° rectangular horizontal (hollow profile) 400 x 400 mm 0° bundle rectangular horizontal (hollow profile) 400 x 220 mm Material feed Material feed max. with 1 x feed 490 mm Material feed max. 9999 mm Material feed min. 3 mm Table height material feed 800 mm Cut-off length min. 10 mm Material diameter min. 30 mm Min. remaining workpiece length 50 mm Min. remaining workpiece length automatic 120 mm Machine data Saw blade speed(s) 20 - 100 m/min Infinitely variable speed levels Saw blade length 4520 mm Saw blade width 34 mm Saw blade thickness 1.1 mm Dimensions and weights Length approx. 2600 mm Width/depth approx. 2150 mm Height approx. 2050 mm Weight approx. 1300 kg Electrical data Power drive motor 3.0 kW Supply voltage 400 V Mains frequency 50 Hz equipped with additional feed roller conveyor 3000 mm

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, saw band length: 3,100 mm, CNC band saw - fully automatic machine for 90° cuts Technical data: Cutting area max. Ø 290 or 310 x 270 mm Cutting speed 20-100 m/min. Frequency controlled Drive power 3.0 kW Bb0Lflpt Saw blade dimensions 3100 x 27 x 0.9 mm Dimensions 1650 x 2300 x 1535 mm Weight 865 kg Accessories: - Bundle tension

Condition: used, Year of construction: 2012, cutting capacity - round 290 mm cutting capacity - square 310 x 270 mm dimensions of saw-band 3100 x 27 x 0,9 mm saw band speed 20 - 100 m/min E2Pqgzu workpiece length - max. 3200 mm Number of working hours ca. 1500 h dimensions ca. 1650 x 2300 x 1535 mm weight of the machine ca. 865 kg

Condition: new, Year of construction: 2024, BMBS 300 x 320 CNC-G Fully automatic, CNC-controlled swing frame metal band saw for miter cuts up to +60°. Description -Fully automatic, CNC-controlled swing frame metal band saw for miter cuts up to +60°. -Hydraulically controlled system for both vices and the working steps of the saw arm -Ball bearing mounted turntable -Frequency converter as standard for stepless adjustment of -saw band speed from 20 - 100 m/min -BRP - Saw band monitoring -The jaws of the two vices are equipped with long-stroke hydraulic cylinders as standard, thus eliminating the need for presetting to the material cross-section to be sawn -Quality Made in Europe Technical data Electrical connection 3 x 400 V / 50 Hz Motor power 2,4 kW Speed levels 2 saw band speed 20 - 100 m/min Saw band dimensions 3660 x 27 x 0,9 mm dimensions (L x W/D x H) approx. 2240 x 2710 x 2050 mm Table height material feed 800 mm weight approx. 800 kg Residual workpiece length min. CNC operation 115+20 mm cutting range 0° round profile 300 mm Uysgg9T7Q cutting range 0° round full 180 mm Cutting range 0° square material lying 320 x 300 mm Cutting range -45° round profile 300 mm Cutting range -45° round full 110 mm Cutting range -45° square material lying 290 x 300 mm Cutting range -60° round profile 200 mm Cutting range -60° round full 80 mm Cutting range -60° square material lying 190 x 190 mm Cutting range bundle round profile 320 x 160 mm

Condition: new, Year of construction: 2023, Light metal circular sawing machine Make: METALLKRAFT Blfaogwnsqy Model: LMS 400 SET Year of manufacture: 2023 - Demonstration machine Machine no.: 1301222 Warranty: 6 months single shift equipped as standard with: - Machine base - 500 mm cross-cut fence - Carbide saw blade 400 x 3.8 x 32 mm, Z96 - operating tool - Operating instructions additionally equipped with: - Minimum quantity lubrication system MD 11 - Attachment of minimum quantity lubrication system

Condition: used, Year of construction: 2017, sheet width 3100 mm plate thickness 4.0 mm distance between columns 320 mm back stop - adjustable 750 mm no. of strokes 42 Hub/min cutting angle 1° 30 table width 475 mm table height 810 mm Control EZM-9910.C total power requirement 7.5 kW weight of the machine ca. 3600 kg dimensions of the machine ca. 3650 x 2260 x 1330 mm current new price 30.000 euros from a maintenance workshop as good as new (!!) Co7F2Duil8 Equipment: - robust / powerful electro-mechanical guillotine shears - with heavy and stable welded construction - electro-motorized back stop, with ball screws - with NC control - EMKO "EZM-9910.C" * target/actual value input for electric back stop - manual cutting gap adjustment, from the front * analogue display of material thickness - short distance between material hold-down and cutting line of 30-40 mm - ergonomically favorable working height - self-lubricating, adjustable guide rail - 1x long side stop - 2x front support arms - ball rollers in the support table - 1x freely movable foot switch - rear protective device (light barrier) - original operating instructions (machine + control)

Condition: new, Year of construction: 2023, Metallkraft GX 3015X 6kW Raycus laser cutting system with shuttle table direct from the manufacturer. Pmcofmj9U PROFESSIONAL NESTING SOFTWARE WITH STANDARD CONFIGURATION Simple operation with drawing function and support for manual and automatic nesting. nesting Supports various materials and thicknesses Excel batch import Support for graphics and G-code software. Thanks to the code conversion software, the HSG system can also support devices from other manufacturers to ensure a high level of compatibility Technical data: Laser power 6KW Max. Traversing speed 140m / min Travel range 3048 x 1524mm Max. Cutting capacity mild steel 25mm / stainless steel 20mm / aluminum 16mm / brass 12mm Positioning accuracy +/- 0.03 mm/m Max. Max. load capacity machine table 800 kg Dimensions LxWxH in mm 10050 x 4920 x 2200

Condition: like new (used), Year of construction: 2016, Functionality: fully functional, punching force: 45 t, total height: 1,780 mm, total width: 950 mm, total length: 1,430 mm, overall weight: 1,400 kg, input voltage: 400 V, type of input current: three-phase, In new condition hydraulic punch cutting machine from Metallkraft. Machine has hardly been used. Incl. various punches and dies. Brand : Metallkraft Type : HPS 45S Year : 2016 Mains voltage : 3 phases, 400 V Punching force : 45 Ton Motor : 4 kW Stroke : 50 mm Unloading : 175 mm Dimensions machine : 1430 x 950 x 1780 mm ( l x w x h) Machine weight : 1400 kg Oiqedzb Punching Max. capacity : Ø 22x15 / Ø 38x8 mm Working height punching : 935 mm Cutting Max width : 200x15 / 300x12 mm Working height cut : 935 mm

Condition: good (used), Year of construction: 2004, Offer 24455 Technical data: - Saw feed via hand lever - Saw blade diameter 315 mm - largest opening width vice approx. 160 mm - Cutting range approx. at 90° approx. 100 mm - flat up to 135 x 80 mm - Cutting range Li + RE at 45° approx. 108 mm - flat up to 100 x 80 mm - Cutting range Li at 60° approx. 80 mm - flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW Bn7Ywl3F - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, Table size 800 x 400mm Max. Grinding surface 800 x 400mm Max. distance centre of spindle to table 500 mm Table speed 5 ~ 25 m/min Table guideway V & Flat way Auto. Cross feed increment approx. 0.5 ~ 20 mm Rapid power cross feed approx.900 mm/min Cross feed on hand wheel 1 rev 5mm 1 gra 0.02 mm Rapid power head elevation 450 mm/min Vertical feed with MPG 1 rev 2 mm 1 gra 0.01 mm Auto down feed (Option) 0.001 ~ 0.999 mm/time Wheel speed 1450 rpm Wheel dimensions 406 x 50 x 127 mm Spindle motor 3,75 kW Weight 3250 kgs Dimensions LxWxH = 3205 x 2050 x 1900 mm Brsjp8Yguho Accessories - 800 x 400 mm magnetic table mounted - Grinding wheel mounted - Integrated dressing unit - Coolant tank - Hydraulic unit - Manuals

Condition: used, Year of construction: 2011, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 120 x 10 mm pressure 55 t engine output 5,5 kW weight of the machine ca. 1250 kg dimensions of the machine ca. 1650 x 1100 x 1900 mm Dpsza9

Condition: used, Year of construction: 2017, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm no. of strokes 15 Hub/min cutting angle 2,0 ° back stop - adjustable max. 1000 mm down holder 14 Stück work height max. 865 mm Column width 3515 mm throat 50.0 mm Control D-Touch 7 oil volume 200 l engine output 15.0 kW voltage 400 V weight 7.650 kg range L-W-H 4110 x 2200 x 2100 mm from a maintenance workshop (vehicle construction) maintained condition (!!) New price ~ 41.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control ("touchscreen") * Anti-reflective, robust 7" color touch screen control panel * easy positioning to the desired size * Positioning accuracy 0.1 mm * unlimited material definition in the material library * Intuitive menu navigation Cdlhjgvd * Separate display for actual and target value * Clearance function of the back gauge * Cutting length control via adjustable stroke length * Cutting counter * Automatic stop of the machine when the programmed cuts are reached - CNC electric motor adjustable back gauge * Travel distance max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - constant, low cutting angle for optimal cutting results - heavy steel construction in welded construction - Ergonomically positioned and clear control panel - Hold-down device arranged close to the cutting edge - split, fold-up finger protection 1000 mm - Self-regulating hold-down pressure - manual cutting gap adjustment via adjustment lever * with central adjustment lever on the right side of the stand - Light barrier for the backgauge area - 1x side stop .. L = 1500 mm - 2x support arms.. L = 1000 mm each - wide sheet metal supports with ball rollers - mobile foot switch with emergency stop function - high-quality and regrindable knives - Hydraulic components MANNESMANN REXROTH or BOSCH - Electrics SIEMENS or TELEMECANQUE - Operation manual * Machine link: ?machineno=1008-9325322

Condition: new, Year of construction: 2024, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Jlm3Pb3 Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: as good as new (ex-display), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: N19080002, sheet thickness steel (max.): 3 mm, total height: 1,260 mm, total width: 660 mm, total length: 1,020 mm, table height: 945 mm, overall weight: 160 kg, table length: 600 mm, table width: 460 mm, sheet thickness (max.): 3 mm, cutting length (max.): 130 mm, worktable length: 600 mm, working height: 945 mm, worktable width: 460 mm, cutting capacity mild steel: 3 mm, cutting capacity: 3 mm, operating pressure: 7 bar, stroke adjustment: 3 mm, Equipment: documentation/manual, emergency stop, finger protection, - Sturdy construction - For fast right-angled notching of sheet metal - User-friendly and energy-saving thanks to pneumatic drive - Solid table with recessed scales and T-slots for precise adjustment of the pivoting stops - Plexiglas finger guard for optimum view of the cutting edge Dpjgmz - Operation via foot pedal

Condition: used, Year of construction: 2022, sheet width:1550 mm Dpfcrn plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t dimensions of the machine ca.:2,7 x 0,75 x 1 m roll feed:3,5 m/min Motorised blade roller 3 rolls Material width 1550 mm Material thickness max. 4 mm Shaft diameter 140 mm Roll feed 3,5 m/min

Condition: new, sheet width 1050 mm plate thickness 1,5 mm distance between columns -- mm weight of the machine ca. 280 kg dimensions of the machine ca. 1300 x 750 x 1515 mm Manual folding machine FSBM 1020-20 HSG / 3770103 - The workpiece is clamped using a foot pedal, so both hands remain free for material feed - Different tool variants available E, S2, HS2 and HSG - The strong auxiliary cylinder makes bending easier - Wide clearance between the upper and lower beam of up to 25 mm Dpo2Cv - Self-lubricating slide bearings - Clamping pressure of the upper beam can be easily adjusted using handy knurled screws - Adjustment of the material thickness by means of a knurled screw - Adjustable stop for bending angle Equipment details: FSBM 1020-20 HSG - With segmented goat foot tools, segmented bending bar and segmented bed pad - Segments have a hardness of HRC24-26 VA steel 1.2 mm Aluminum 2.4 mm

Condition: new, saw blade diameter 355 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 125 x 125 mm capacity 90 degrees: flat 170 x 110 mm turning speeds 700 / 900 / 1100 / 1300 U/min mitre joint cuts -/+ degrees - 45 / + 0 total power requirement 3.5 kW weight of the machine ca. 25.0 kg Description: - mobile dry metal cutter - for use on a construction site, among other things - with brushless motor - particularly efficient, durable and maintenance-free - for burr-free sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant - use e.g. in metal construction, in carpentry, for interior fitters, etc. - easy to transport - four speeds can be selected at the touch of a button - motor with soft start - digital display showing the selected speed . and current power in watts - angle adjustment 0° - 45° for miter cuts - vice with quick adjustment - large LED work light on the underside of the handle * to illuminate the work area - secure stand thanks to non-slip hard rubber feet - with spindle lock for quick saw blade changes - incl. 1x saw blade for steel 355x25.4x2.4mm Z66 Bryldbf3Zw

Condition: new, Year of construction: 2024, TBS - Manual plate shears Manual plate shears Suitable for cutting mild steel, aluminium, copper, zinc, plastics High quality cutting blades made of steel with a hardness of HRC55-60 Equipped with two operating handles With front support surface with scale and adjustable back gauge 800 mm table height Scope of delivery: 2 operating handles Model TBS 2000-12 Article no. 3746020 Technical data working width max. 2000 mm sheet thickness max. - material tensile strength 400N/qmm 1,25 mm backgauge range 0-300 mm weight 511 kg Wq8Hwtys3 Dimension in mm 2450 x 1100 x 1050 mm

Condition: used, Year of construction: 2011, cutting diameter 240 mm saw band length 2980 mm Bxbhr7Jq9E cutting width 320 mm dimensions of saw-band 2980 x 27 x 0,9 mm band speed 35 / 70 m/min table height 940 mm capacity 90 degrees: round 290 mm capacity 90 degrees: flat 320x290 mm capacity 45 degrees: round 240 mm capacity 45 degrees: flat re. 240x150 / li. 240x100 mm capacity 60 degrees: round 150 mm capacity 60 degrees: flat 150x180 mm total connected load 2,6 kW weight of the machine ca. 550 kg dimensions of the machine ca. 1800 x 1050 x 1950 mm *semi-automatic band saw Furnishing: - Micro dosing system - 3000 mm feed roller conveyor - Coolant gun for cleaning the machine - Miter cut from 45° right - 60° left - automatic vice clamping + vice opening - automatic saw cut + automatic raising saw bracket

Condition: used, Year of construction: 2013, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm no. of strokes 15 Hub/min cutting angle 2,0 ° back stop - adjustable max. 1000 mm down holder 14 Stück work height max. 865 mm Column width 3515 mm throat 50.0 mm Control D-Touch 7 oil volume 200 l engine output 15.0 kW voltage 400 V weight 7.650 kg range L-W-H 4110 x 2200 x 2100 mm well-maintained / like new condition (!!) New price ~ 45.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control ("touchscreen") * Anti-reflective, robust 7" color touch screen control panel * easy positioning to the desired size * Positioning accuracy 0.1 mm * unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target value * Clearance function of the back gauge * Cutting length control via adjustable stroke length * Cutting counter Sdauaiudrt * Automatic stop of the machine when the programmed cuts are reached - CNC electric motor adjustable back gauge * Travel distance max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - constant, low cutting angle for optimal cutting results - heavy steel construction in welded construction - Ergonomically positioned and clear control panel - Hold-down device arranged close to the cutting edge - split, fold-up finger protection 1000 mm - Self-regulating hold-down pressure - manual cutting gap adjustment via adjustment lever * with central adjustment lever on the right side of the stand - Light barrier for the backgauge area - 1x side stop .. L = 1500 mm - 2x support arms.. L = 1000 mm each - wide sheet metal supports with ball rollers - mobile foot switch with emergency stop function - high-quality and regrindable knives - Hydraulic components MANNESMANN REXROTH or BOSCH - Electrics SIEMENS or TELEMECANQUE - original instruction manual * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts * Machine link: mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008- 9325340

Condition: new, Year of construction: 2024, For sawing tubes and solid materials made of stainless and tool steelTwo band speeds by means of pole-changing motorRobust gear with hardened and ground shaftPrecise and robust band guides with adjustable carbide platesLonger service life of the saw band due to saw arm inclination of 25°Efficient coolant application to the saw band guidesElectromechanical monitoring of the saw band tension, In case of deviations, a microswitch switches off the machine chip clearing brush for optimum cleaning and maintenance of the saw band function of the semi-automatic machine:Automatic workpiece clamping after the start of the cutting cycleExecution of the saw cut at the selected band speedAutonomous stop of the lowering movement and of the saw band in the lower end positionAutonomous return movement of the saw arm to its upper end positionOperator only has to move the material automaticallyEquipment:Two band speedsCut-off buttonCoolant systemChips clearance brushSaw band tension monitoringSwivelling control panelLength approx.1860 mmWidth/Depth approx.1045 mmHeight approx.1750 mmWeight approx.405 kgPower consumptionPower consumption1.5 kWElectrical dataConnection voltage400 VMachine dataSaw blade speed(s)20 - 100 m/minSpeed steplessSaw blade length2720 mmSaw blade width27 mmSaw blade thickness0,9 mmSaw blade 60 - -45 °Cutting ranges0° round (tube) Beh30Tdjdn

Condition: new, Year of construction: 2024, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t Jy28Lm piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Location: Ex works - available at short notice -

Condition: new, Year of construction: 2024, HSBM 2020-20 SB - Manual swing bending machine HSBM SB - Manual swing bending machine in heavy design with segmented upper tools simple operation segmented upper tools swivel bending function with secure clamping of the workpiece by pretensioning of the upper beam heavy, compact welded construction for easy bending with exact adjustment of the bending angle by means of stop with scale particularly low-maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note on technical data: max. sheet thickness: performance data related to material with tensile strength 400N/mm²; bending capacity VA: factor 0,75; bending capacity Alu: factor 1,2; for bending VA hardened upper tools are required Model HSBM 2020-20 SB Article-No. 3772920 Technical data working width max. 2.020 mm bending capacity max. steel 400 N/qmm 2 mm Bending capacity max. steel 400 N/qmm without cheek widening Bending capacity max. steel 400 N/qmm w. cheek widening Bending capacity max. stainless steel 1,5 mm Bending capacity max. aluminium 2,4 mm Bending angle max. 135 Wq8Hncs82 Segment division Clearance between upper and lower cheek max. 120 mm length 2500 mm width 710 mm height 1500 mm Weight 1.020 kg Location: Ex works - free on truck -

Condition: new, Year of construction: 2024, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker C0P39Qx Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: new, Year of construction: 2024, KRBS 101 Combined pipe, profile and belt grinder Convenient operation due to easily adjustable clamping device The rotatable clamping jaws of the clamping device allow safe clamping of square tubes, round tubes and flat steel Adjustable grinding angle from 30 - 90° and from 0° - 60°. Wrxgnc8Gu Due to the optimised quick-change holder, the tensioning pulley can be changed easily and quickly without tools Particularly durable due to larger and improved roller bearings Practical tension pulley holders integrated in the substructure Extensive range of tension rollers for grinding different pipe diameters available as accessories Quick change between pipe grinding and belt grinding possible Powerful motor Almost all adjustments can be made without tools (operating tool included) Large, hinged protective screen with optimum field of vision 2 belt speeds for optimum adaptation to the respective material (15 m/s best for stainless steel and aluminium, 30 m/s perfectly suitable for steel) With two easily removable chip collecting containers Suction nozzle (Ø 100 mm) for suction systems available Suction units available as accessories Further developed, vibration reducing substructure Scope of delivery: 1 x standard sanding belt grain K 36 2 x spit collection container 1 x screw wrench 1 x sanding roller 42 mm Model KRBS 101 Article no. 3921001 Technical data Mains connection 400 V Mains frequency 50 Hz Motor power 2.5 / 3.3 kW Sc