Used Kaltenbach Kks 400 H for sale (116)

Condition: used, saw blade diameter Ø 400 mm cutting diameter 130 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 315 x 40 mm stroke 150 mm 0L7Xyfd cutting speed 10 - 30 m/min total power requirement 1.8 / 2.7 kW weight of the machine ca. 850 kg range L-W-H 1200 x 1000 x 1700 mm Equipment: - robust cold circular saw with powerful drive - electro-hydraulic metal circular saw - "underfloor" * Underfloor = saw blade feed from below - electro-hydraulic material hold-down device * manual fine feed - mitre adjustment on both sides via large turntable * including analogue degree display - stepless feed adjustment of the saw blade - all gears are hardened and flank ground - entire gear runs in an oil bath - all bearings have roller bearings - pole-changing motor - proven saw blade guidance in a strong swivel bearing - operating instructions (PDF)

Condition: refurbished (used), Year of construction: 1980, For sale is a Kaltenbach cold circular saw The machine has been technically and optically refurbished Gearbox naturally free of play! Clxopy3V Type: KKS 400 H Incl 2x hydraulic horizontal clamps Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Year of construction: 2001, Condition: used, saw blade diameter 400 mm miter . C0U8Hbpx8Q Kühlung weight of the machine ca. 1 t number 4 Stück

Year of construction: 1987, Condition: good (used), machine/vehicle number: 108922, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 305 x 40 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 245 x 40 mm cutting speed: 10 m/min engine: 380 V, 1,7 kW space needed: 1100 x 1000 x 1900 mm weight: 700 kg B9Yqbg9Jje

Condition: used, Year of construction: 2003, Max. saw blade diameter: 400 mm Continuously adjustable saw blade feed Hu2Ysic 2 engine speeds Hydraulic material clamp Coolant pump Positioning unit up to 3000 mm and roller conveyor Including safety fences and light barrier Machine is already dismantled and will be loaded free

Condition: good (used), Year of construction: 1989, machine/vehicle number: 110886, Offer 21192 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° round 130 mm - square 120 mm - rectangular 300 x 40 mm - or 240 x 85 mm - at 45° round 130 mm - square 110 mm - rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. infinitely variable - Vertical metal clamping - Coolant device Brmwsdoq3W - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg

Condition: used, Year of construction: 1983, saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm cutting range - square - 120 x 120 mm cutting range - flat - 300 x 40 mm Ghcxisswv capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm capacity 45 degrees: flat 245 x 40 mm mitter cutting - all-position 90 ° cutting speed 13 / 25 m/min control minipos 807 total power requirement 4,3 kW weight of the machine ca. 850 kg dimensions of machine L x W x H 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant

Condition: refurbished (used), Year of construction: 1980, For sale is a Kaltenbach cold circular saw The machine has been technically and optically refurbished Gearbox naturally free of play! Type: KKS 400 H Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Br7Mcioquwu Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: good (used), Year of construction: 1973, Saw blade diameter 370 mm Cutting capacity 45° - 90 round 115 mm flat approx. 215 x 20 mm rectangular approx. 95 x 105 mm U-profile approx. 160 x 55 mm Cutting speeds 11 - 15 - 22 m/min Motor power 0.9 - 1.2 - 1.4 kW Dimensions L x W x H 1100 x 1050 x 1600 mm Weight 850 kg Accessories / Special features: Pbfl8Fsmmb - Semi-automatic operation - After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released again. - Fully hydraulic stepless saw blade feed - 3-way pole-changing saw motor - Mitre cut R - L on both sides - 0° longitudinal cut possible - Coolant system - 1 saw blade Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), - Double miter - Mist lubrication system - protective cap 2Bz8Vizf - 400V

Condition: excellent (used), Year of construction: 2002, saw blade diameter: 400 mm, Semi-automatic cold circular sawing machine Manufacturer Kaltenbach Type. KKS 400E Year of manufacture 2002 Technical data: Make: Kaltenbach Type: KKS 400 E Year of manufacture: 2002 Saw blade Ø: 400 mm Gearbox with speeds of 14/28 m/min -Cutting range at 90 degrees flat 120×120 mm -Cutting range at 45 degrees flat 305×40 mm -Cutting range for round material 130 mm -Cutting speed: 14/28 m/min Peua3Sjxu Total power requirement: 3.5 kW Machine dimensions L 2.80 x W 1.1 x H 2.0 m (including stop) Weight 1250 kg + roller conveyors Equipment - Hydraulic retraction arms left + right - Minimal lubrication - Feed - roller conveyor 2 x 2000 mm - CNC stop L40, L = 2,300 mm All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: good (used), with miter cut Hydraulic clamping hydraulic saw cut Hjkb0Yr7G miter cut on both sides with roller conveyor

Year of construction: 1986, Condition: good (used), machine/vehicle number: 106157, Offer 21035 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - mitre adjustment left + right 0 - 90 ° - cutting speed 1750 / 3500 m/min - feed speed of the saw blade 0 - 3 m/min - rapid return 3000 mm/min - Saw drive 400 V / 3,7 / 4,4 kW Dye9Ve - 2 pieces pneum. Material clamping vices with adjustable clamping pressure - space requirement approx. W 1200 x H 1900 x D 1200 mm - weight approx. 600 kg

Condition: refurbished (used), Year of construction: 1988, For sale is a Kaltenbach cold circular saw. The machine has been completely dismantled and rebuilt. In the course of the overhaul, the gearbox, motor and hydraulics were overhauled. The table has been turned flat and re-stored. Gearbox free of play! Type: KKS 400 E Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Dqqp3F Weight: 900 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Year of construction: 1980, Condition: used, Circular saw with miter cut Make KALTENBACH Type:KKS 400 M Year.ca.1980 Xc83P28R Hydr.feed infinitely variable. Saw blade: 400mm

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base Qq8Lgjs2 - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: good (used), Year of construction: 1995, saw blade diameter: 400 mm, Automatic cold circular sawing machine Fab. Kaltenbach Typ. KKS 400 NA year 1995 Technical data Make: Kaltenbach Type: KKS 400 NA Year of manufacture: 1995 Saw blade Ø: 400 mm Working area square material: 120 x 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,200 x 1200 x 1800 mm (plus roller conveyor) Weight: approx. 1.6 tons Equipment - 400mm saw blade (renewed) - Infeed roller conveyor left 1500 mm - Mitre cut - Saw angle with manual adjustment - Rotatable saw table for straight cuts and bevel cuts 180° swivel range - 2 motor speeds for the saw blade speed - Infinitely adjustable saw blade stroke - Hydraulic saw blade feed - Automatic material feed - Machine CE conform - Machine can be operated with feed or manually R9Wziwz All data without guarantee. A demonstration is possible at any time in our showroom.

Year of construction: 1980, Condition: used, machine/vehicle number: 55155, disk of circular saw-Ø: 400 mm Xzphavvk0 cutting area at 90° round: 130 mm cutting area at 90° square: 200 x 80 bzw. 315 x 40 mm cutting area in mitre at 45° square: flach/hochkant 180x70/100x60 mm cutting speed: 19/28 m/min engine: 380 V, 1,7/2,6 kW space needed: 1100 x 1050 x 1620 mm weight: 850 kg

Condition: as good as new (ex-display), Description Csupg9033M Miscellaneous Kaltenbach KKS 400 sawing machine(s) (completely reconditioned) - Protective hood included - 2 cutting speeds - Cooling by means of cooling system * LED work light Optional: - Roller conveyor - Measuring system (manual or automatic) - Micro dosing system Price on request. TM-Tools B.V. is the Kaltenbach overhaul specialist. More information can be requested via email or call +31(0)85 203 11 66.

Condition: refurbished (used), Year of construction: 1990, For sale is a Kaltenbach cold circular saw. The machine has been completely dismantled and rebuilt. In the course of the overhaul, the gearbox, motor and hydraulics were overhauled. The table has been turned flat and re-stored. Gearbox free of play! Type: KKS 400 E Year of manufacture 1990 Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Czhhbopvdw Forklift available for loading.

Condition: used, 1 used cold sawing machine KALTENBACH KKS 400 Technical data: Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting area flat: 315x40 mm Cutting area square: 120x120 mm Total power requirement: 1.5 kW Space requirement approx.: 1200 x x1000 x 1700 mm Machine weight approx.: 1250 kg Dnlazt Manufacturer's description; The powerful drive provides the prerequisite for high cutting performance, long service life of the saw blades and perfectly clean cut surfaces. All gears are hardened and flank-ground. The entire gearbox runs in an oil bath; all bearing points have roller bearings. Various speeds can be achieved by means of gear wheels, the cutting speeds of which are switched electrically by pole-changing motors. The tried and tested saw blade guide in a strong pivot bearing is subject to practically no wear. It is rigid and allows work within the tightest tolerances. The hydraulic feed of the saw blade is infinitely adjustable according to Skla.

Condition: excellent (used), Year of construction: 1993, saw blade diameter: 400 mm, Automatic cold circular sawing machine Fab. Kaltenbach Typ. KKS 400 EC NA year 1993 Technical data Make: Kaltenbach Type: KKS 400 NA EC Year of manufacture: 1993 Saw blade Ø: 400 mm Motor power: 1,8/2,7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid feed/return: 1,550 mm/min Working area square material: 120 x 120 mm Cvm00Tcz2U Working area flat material: 305 x 20 mm Working area round material: 130 mm Working area min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 3,500 x 1200 x 1800 mm Weight: approx. 300 kg Equipment - 400mm saw blade - Infeed and outfeed roller conveyor incl. manual stop - Vertical vice in long-stroke design - 135 mm stroke - Rotatable saw table for straight and angled cuts 180° swivel range - Automatic material feed - Workpiece fence with stable contact surfaces on both sides of the saw blade - Hydraulic saw blade feed, infinitely adjustable according to table - Work area lighting - Roller-mounted chip drawer, removable - Machine guard, - Machine CE conform All specifications without guarantee. A demonstration is possible at any time in our showroom.

Year of construction: 1988, Condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm Sgm3Jmoha cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V space needed: 2750 x 1500 x 1900 mm weight: 1350 kg

Condition: refurbished (used), Fully automatic circular saw machine Kaltenach KKS 400NA Machine has had a major service where several parts have been replaced. Ccbqaxk Price on request. TM-Tools B.V. is the Kaltenbach overhaul specialist in the Benelux. More information can be requested via email.

Condition: ready for operation (used), Year of construction: 1974, disk of circular saw-Ø: 400 mm cutting area at 90° round: 120 mm cutting area at 90° square: 200 x 80 mm cutting area in mitre at 45° square: 150 x 70 mm cutting speed: 13, 17, 26 m/min engine: 380 V, 1,7/2,2/2,6 kW space needed: 1050 x 1000 x 1680 mm Doyrnp weight: ca. 850 kg