Used Hermle C 400 for sale (184)

Condition: used, Year of construction: 2018, x-travel 850 mm y-travel 700 mm z-travel 500 mm Nslhcdwjvzhcqj Necp Control Heidenhain TNC 640 spindle HSK A 63 kW turning speeds 15000 U/min table-size 1070x700 mm Tools changer 38 fach/tools Machine on 26.000 h Spindle hours 11.500 h internal coolant system feed 40 bar weight of the machine ca. 9,5 t 3-axis CNC machining center -Rigid clamping table 1070 x 700 mm -coolant device, -electr. heat compensation, -electric manual control module, -Measuring probe -Tool breakage monitoring -chip washing gun

Condition: excellent (used), Year of construction: 2017, operating hours: 16,193 h, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, A similar machine was recently successfully auctioned! Bidding obliges the buyer to pick it up on time by March 31, 2025! TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Ncslhcdwov Hmdqs Nop Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Centering hole: Ø 32 H7 Swivel range: +91° / -139° Drive type C axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load One-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Cooling lubricant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 24,403 h Machine switch-on time: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: excellent (used), Year of construction: 2019, operating hours: 11,832 h, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Swivel range: +91° / -139° Drive type C-axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load one-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 20,178 h Machine switch-on time: 19,094 h Spindle time: 11,832 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device Nolhcdwjvw Sdqe Nscp - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: excellent (used), Year of construction: 2018, operating hours: 6,000 h, Functionality: fully functional, machine/vehicle number: 26421, travel distance X-axis: 350 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 350 mm, feed length Y-axis: 440 mm, feed length Z-axis: 330 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 46 kVA, torque: 98 Nm, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece length (max.): 400 mm, workpiece width (max.): 400 mm, workpiece height (max.): 300 mm, workpiece diameter (max.): 400 mm, workpiece weight (max.): 100 kg, total height: 2,700 mm, total length: 2,500 mm, total width: 2,000 mm, table width: 320 mm, table load: 100 kg, rotary table diameter: 320 mm, rotational speed (min.): 25 rpm, rotational speed (max.): 40 rpm, overall weight: 7,200 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 6,000 h, coolant supply: 40 bar, spindle motor power: 31,000 W, number of spindles: 1, number of slots in tool magazine: 36, tool length: 200 mm, tool diameter: 80 mm, tool weight: 2,500 g, input voltage: 415 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Low hours, with brand new spindle in July 2024. Coolant filter and chiller. Nelhcdwov Subhs Nscp Array of tooling HSK-63.

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 450 mm z-travel 450 mm table surface area 800*465 mm Control iTNC 530 spindle taper: HSK - A63 turning speed range 18.000 U/min coolant Blasluft durch Spindelmit measuring feelers - electric IR Taster M&H Tool Measurement Blum Laser total power requirement 27 kVA Neljvw D D Nshcdw Nscp weight of the machine ca. 6 t dimensions of the machine ca. 3*3*3 m Movie: ?v=G5holGFWlas

Condition: ready for operation (used), Year of construction: 2009, Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 5 Tools Number of index 38 Type of tool holder HSK-A 63 Njlhcdwov Rr Sne Necp Additional Equipment Cooling: Internal cooling 40-80 bar This 5-axis Hermle C 40 U was manufactured in 2009. A universal machining centre, it offers advanced capabilities for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 40 U machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2000, The machine is in good technical condition, after previous agreement the possibility of testing. - The current condition of the machine corresponds to its age, we have no problems with the machine at the moment. 5.1.2022 X axis bolt changed. 25.4.2024 hydraulics changed. Ncslhsv S D S Ajcdw Nep -Number of spindle hours 41273, number of machine hours 89892 -Number of axes 5 Machine video on request.

Year of construction: 2003, Condition: good (used), HDH iTNC 530 control system Spindle 18,000 rpm SK 40 117 tool positions Linear axes standard version NC swivel rotary table Ø 630 incl. motor cooling T-slots for SRT Ø 630 Internal coolant supply 40 bar, includes: filter, chip conveyor, coolant system, flange for extraction, sealing air for scales Nslhcdev Rw E Tew Nscp Internal coolant supply, scraper belt conveyor Blow-off device Manual booth door Manual booth roof Polycarbonate safety windows Electronic heat compensation iTNC Electronic hand control module iTNC Renishaw measuring probe Chip flushing gun Oil mist extraction for internal coolant supply Weight: 9.5 tons

Condition: excellent (used), Year of construction: 2001, 1 new CNC machining center - 3-axis controlled Make: Hermle Model: C 600 V Year of manufacture: 20001 TECHNICAL data: x-travel: 600 mm Ncolevzz R Iohcdw Njp y-travel: 450 mm z-travel: 400 mm Spindle speed: 16,000 rpm Tool holder: HSK A63 Weight of the machine approx.: 6 tons Equipment / accessories: CNC control Siemens 840D 30-way tool changer Electronic handwheel Chip conveyor Minimum quantity lubrication Machine was only used for demonstration purposes.

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 350 mm z-travel 450 mm Control TNC 430 Heidenhain turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 9 / 7 kW Nslhev I Eqljcdw Necp max. Torque 90 Nm tool taper SK 40 tool clamping 9 kN spindle diameter in front bearing 70 mm numbers of pallets 2 size of pallet 660 x 370 mm max. table load 100 kg change time ca. 4,0 sec number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 35 m/min feed speeds max. 30.000 mm/min feed power 6 kN total power requirement 22 kVA weight of the machine ca. 7,0 t dimensions of the machine ca. 5,0 x 3,5 x 2,9 m CNC-MachiningCenter Vertical HERMLE - C 600 P - pallet-changer

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, 5-Axis Simultaneous Universal Machining Center Manufacturer: Hermle Type: C 42 U dynamic Year of manufacture: 2017 Control: Heidenhain Njlhcdwov I Urle Nscp Technical specifications: X travel: 800 mm Y travel: 800 mm Z travel: 550 mm Spindle mount: HSK63 High-pressure internal coolant: 70 bar Spindle hours: approx. 8,900 h

Condition: ready for operation (used), Year of construction: 2009, Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 5 Tools Number of index 38 Type of tool holder HSK-A 63 Additional Equipment Cooling: Internal cooling 40-80 bar This 5-axis Hermle C 40 U was manufactured in 2009. A universal machining centre designed for precision and versatility in complex machining tasks. Ideal for those seeking advanced milling capabilities. Contact us for more information about this machine. Application Types Nolov Rhn Sjhcdw Necp Milling

Condition: good (used), Year of construction: 2004, The machine is in good technical condition, after previous agreement the possibility of testing.- The current condition corresponds to the age, we have no problems with the machine at the moment. 16.3.2022 tool magazine door replacement. 28.8.2023 servo changer SIMODRIVE 611/18A was changed. -Number of spindle hours 18396, number of machine hours 56040 Ncslhcdov S D Rljw Nsp -Number of axes 3 Machine video on request.

Condition: good (used), Year of construction: 2001, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 1,000 kg, Equipment: chip conveyor, TECHNICAL MACHINE BENEFITS: - RAPID TRAVERSE IN ALL AXES 30 M/MIN - CHIP-TO-CHIP TIME 6.5 S - NC SWIVEL ROTARY TABLE - CLAMPING SURFACE: Ø 800 MM - SWIVEL RANGE: +15°/-97° - SPEED DRIVE POWER/TORQUE/TOOL CONSUMPTION - 10000 1/MIN 25 KW/159 NM (40% ED) / SK 40/HSK A 63 - 16000* 1/MIN 15 KW/130 NM (40% ED) / SK 40/HSK A 63 - 24000* 1/MIN 23 KW/79 NM (40% ED) / HSK A 63 - 30 SEATS QUALITATIVE MACHINE BENEFITS: - INTERNAL COOLANT SUPPLY 40 BAR - HEIDENHAIN MEASURING PROBE WITH RADIO - ELECTRIC HEAT COMPENSATION - ELECTRONIC MANUAL CONTROL MODULE - OIL MIST EXTRACTION - CHIP CLEANING GUN - BLOW-OFF DEVICE - SEALING AIR FOR STANDARDS Ncjlhcdsv Hxifow Nep - A AXIS +15º / -97º C AXIS 360º - C AXIS 360º

Condition: excellent (used), Year of construction: 2014, CNC vertical 5-axis machining center with 6-fold pallet station Hermle C 42 U Year of construction 2014 Heidenhain iTNC 530 CNC 2-axis NC swivel rotary table: Table rotary axis C-axis 360° Table swivel axis A-axis +130°/-130° Number of pallets in the system: 6 Pallet clamping surface 400 x 400 mm Pallet load max. 450 kg Longitudinal travel: X 800 mm Ncslhcdsrpmcaow Nsp Transverse travel: Y 800 mm Vertical travel Z 550 mm Rapid traverse up to: X/Y/Z 45,000 mm/min. C 65 rpm. A 25 rpm. Spindle drive power: 10/20 kW AC Spindle speeds: 20 - 18,000 rpm. Spindle torque max. 180 Nm Tool magazine positions: max. 85 (42 ATC + 43 additional magazine) Tool holder: HSK-A63 Tool Ø with/without adjacent tools: max. 90/125 mm Tool length: max. 300 mm Tool weight: max. 8 kg Chip-to-chip time: 4.5 sec. Accessories: 5-axis machining with 2-axis NC swivel rotary table. Pallet station 6-fold with automatic pallet changer. 85-position tool magazine with automatic tool changer. Full enclosure. Coolant device. High pressure spindle internal cooling IKZ 80 bar. Paper belt filter. BLUM laser tool measurement and tool breakage control. Measuring probe. Direct measuring systems X,Y,Z. Chip conveyor. Very well maintained machine - keeps good tolerances Spindle was replaced with a new spindle in 2019. The new spindle has very low running hours. Offer number MV-6375

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm control TNC 430 Heidenhain turning speed range - main spindle max. 10.000 min/-1 Ncelotqmqgehcdw Nsp power capacity - main spindel 7 / 9 kW tool taper ISO 40 spindle bearing diameter 70 mm measuring system direct Resolution 0,001 mm table surface area Ø 280 mm max. table load 250 kg Swivel range +/- 110 ° rotatable 360 ° number of toolpositions 30 pos. max. tool diameter 80 (125) mm change-time chip to chip 5,5 sec rapid traverse ( X / Y / Z ) 35 / 35 / 35 m/min feed speeds 1 - 30.000 mm/min Feed force 6 kN total power requirement 30 kVA weight of the machine ca. 6,5 t dimensions of the machine ca. 3,5 x 3,5 x 2,8 m 5 Axis CNC - Machining Center Universal HERMLE - C 600 U

Condition: used, Year of construction: 2021, Travel paths (X/Y/Z): 650x650x500 mm, 36+88 tool positions HSK-63A, net weight: 11,000 kg, control HEIDENHAIN TNC640, belt filter system KNOLL KF 200/1100, year of manufacture: 2021, chip conveyor KNOLL, robot system (automation with pallet changer and NC gripper) HERMLE RS1, year of manufacture: 2021, serial no.: net weight: 3,800 kg, with industrial robot KUKA KR70R2100/SEL, year of manufacture: 2021, serial no.: 1421599, approx. 13 clamping pallets, 1 hydraulic machine vice BONERTZ HLSR, approx. 14 machine screw pieces, 1 three-jaw chuck, 3 dies, 1 mobile workbench, Length: approx. 120 cm, with base cabinet 1-door/4-drawer, with contents as per photos Ncjlhev Aky Ujcdw Nsp

Condition: ready for operation (used), Year of construction: 2003, General Data Machine weight 8500 kg Ncolhev Rr Trscdw Nsp Control Unit Brand FANUC Model Oi-MF Main Drive Number of axis 5 Movement X-Axis Movement 1000 mm Y-Axis Movement 500 mm Z-Axis Movement 500 mm Additional Equipment CE Certification This 5-axis Hermle C 800 U vertical machining center was manufactured in 2003. It offers advanced capabilities for complex and precise machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 U machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2006, Technical details: x-travel: 650 mm y-travel: 600 mm z-travel: 500 mm spindle turning speed range: 10.000 1/min control: HEIDENHAIN iTNC 530 feed speeds infinitely variable: 1 - 30.000 mm/min rapid traverse: 45 m/min Tool changer: 32 Pos. spindle taper ISO: SK 40 weight of the machine ca.: 9,5 t total power requirement: 41 kVA dimensions of the machine ca.: 3,5 x 3,5 x 3,5 m 4-axis universal-machining center, with rigid table and NC-dividing device (left site) incl. tailstock, prepared for 3D touch probe HEIDENHAIN, compensation of thermal expansion, man. cabin top, Ncoljv N Ncnehcdw Nep no chipconveyor, standard coolant device, meter readings: approx. 36.000h "machine on", approx. 12.000h "spindle on" *

Condition: used, Year of construction: 2015, travel -x axis 450 mm travel -y axis 600 mm travel -z axis 330 mm control Siemens 840 D number of spindle speeds 18.000 U/min tool taper HSK-A63 numbers of positions in the tool changer 55 surface area Ø 320 mm swival range +/- 135 ° 5-axis simultaneous machining center | HERMLE - C 22 U euipped with ITC (80 bar), 55-way tool changer, NC swivel rotary table (Ø 320) and chip conveyor. The machine has only approx. 17.000 H spindle hours. Equipment/accessories: - BLUM tool breakage control / -measurement Nslhcdevy T Dwsw Njcp - BLUM calibration mandrel - RENISHAW OMP 40-2 measuring probe The machine is in a well-maintained condition can be inspected at any time under power in our Hattingen warehouse. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 22 | C22 | C-22 | C22U "

Condition: excellent (used), Year of construction: 2016, operating hours: 7,460 h, Functionality: fully functional, machine/vehicle number: 24627, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 150 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 55, swivel angle A-axis (min.): 135 °, swivel angle A-axis (max.): 135 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, 5-axis machining center with workpiece storage AUTOMATION Eco-Compact 20 workpiece storage and handling system: 20 workpiece storage spaces / Handling system for automatic loading / Integrated, pneumatic interface for Quick-Point clamping towers Swivel device: Easy swiveling of the system to a fixed point Quick-Point automation clamping tower 96: Height: 80 mm / Plate: Ø 176 mm / Body: Ø 246 mm Quick-Point round plate 96: Without holes / Ø 246 x 27 mm / Bolt spacing: 96 mm Macro-Grip automation clamp 77: Length: 170 mm / Clamping range: 0-160 mm TECHNICAL DETAILS X-axis travel: 450 mm Y-axis travel: 600 mm Z-axis travel: 330 mm Control type: Heidenhain TNC 640 Functions: Dynamic Efficiency (ACC, AFC, trochoidal milling), Dynamic Precision (CTC, AVD), HIMS (Hermle Information and Monitoring Software) Workpiece capacity Maximum jaw width: 470 mm Maximum workpiece diameter: Ø 450 mm Maximum workpiece height: 370 mm Interference circle (A-axis) in 0° position: Ø 610 mm Spindle Speed: 18,000 rpm Tool holder: HSK-A63 Power/torque at 20% duty cycle: 31 kW / 35Nm Tool magazine Interface: SK 40 / HSK A63 Magazine locations: 55 Chip-to-chip time: approx. 4.5 s Maximum tool length: 250 mm Maximum tool diameter with corresponding adjacent location occupancy: Ø 125 mm Maximum tool diameter: Ø 80 mm Maximum tool weight: 8 kg Maximum magazine load: 220 kg Rapid traverse and acceleration Rapid traverse linear (dynamic) X-Y-Z: 30 (50) m/min Acceleration linear (dynamic) X-Y-Z: 8 (15) m/s² Feed force linear X-Y-Z: 4,500 N Table Swivel rotary table: Ø 320 mm Clamping surface: Ø 320 mm Swivel range: +/- 135° Drive type C-axis: Torque Speed of swivel axis A (single-sided drive): 25 rpm Speed of swivel axis A (tandem drive): 55 rpm Speed of rotary axis C: 80 rpm Maximum table load: 150 kg Nolhevzyw Tjcdw Nscp Star-shaped T-slots: 4 pieces / 14 H7 Positioning uncertainty Positioning uncertainty (X-Y-Z axis according to ISO 230-2): ≤ 0.006 mm Chip management Chip chute: Space-saving installation on the left or right Capacity of chip chute: 210 l Chip conveyor: Scraper belt conveyor MACHINE DETAILS Switch-on time: 21,883 h Control switch-on time: 23,157 h Program run: 10,584 h Spindle hours: 7,460 h Power consumption: 46 kVA Net weight: 9000 kg Coolant supply Internal coolant supply: 80 bar Additionally required options: Bed flushing paper belt filter or internal coolant supply 80 bar Internal coolant supply 80 bar includes: - Paper belt filter including police filter - Standard coolant device - Flushing air for scales and bed flushing - Production cabin Safety and additional functions Vario valve: available Blow-off device: blown air through the spindle center Chip flushing gun: available Emulsion mist extraction: including post-filter Manual cabin roof: available Polycarbonate safety window: available Electronic equipment Electrical heat compensation: Heidenhain Electrical manual control module: Heidenhain Measuring probe: Renishaw including preparation BLUM tool breakage/measurement A2: available

Condition: used, Year of construction: 2021, Travel (X/Y/Z): 350x440x330 mm, 36 tool positions HSK-A50, net weight: 7,200 kg, control HEIDENHAIN TNC640, 2 magnetic clamping pallets, 3 clamping pallets, 3 adapter pallets, approx. 5 machine vices, 1 workbench, length: approx. 120 cm, with base cabinet 1-door/5-way, with contents as per photos Ncslhcdov Akzfew Nep

Condition: ready for operation (used), Year of construction: 1998, operating hours: 52,715 h, Control Unit Brand HEIDENHAIN Njljvb N Nrehcdw Nscp Model TNC 430 Main Drive Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm A-Axis Movement +90° to -90° C-Axis Movement 360° Additional Equipment measuring probe not included This 5-axis Hermle C 800 U was manufactured in 1998. A CNC universal milling machine featuring a swivel rotary table with a 280 mm diameter, it operates with a Heidenhain TNC 430 CNC and a spindle cone of SK 40. With 67,073 operating hours, it remains in good condition. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2001, operating hours: 31,000 h, General Data Machine weight 6000 Control Unit Brand HEIDENHAIN Model 430 Main Drive Tool taper ISO 40 Number of axis 3 Movement X-Axis Movement 600 mm Y-Axis Movement 450 mm Z-Axis Movement 450 mm Table Outer length 800 mm Outer width 465 mm Media Chip conveyor Yes Internal cooling Yes Nelhcdwsvy I Sio Necp This 3-axis Hermle C 600 V vertical machining center was manufactured in 2001. Consider the opportunity to buy this Hermle C 600 V vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, General Data Measurements width 3970 mm Measurements depth 4629 mm Measurements height 3050 mm Machine weight 12700 kg Main Drive Number of spindles 1 Spindle speed range 16000 rpm Spindle motor power 10 kW Ncolhcjupnabedw Nep Tool taper SK 40 Number of axis 3 Movement X-Axis Movement 1200 mm Y-Axis Movement 900 mm Z-Axis Movement 500 mm Table Outer length 1400 mm Outer width 900 mm This 3-axis HERMLE C 1200 V vertical machining centre was manufactured in 2003. It features a robust clamping table measuring 1400 x 900 mm and a high-performance milling spindle with a maximum power of 10 kW, torque up to 87 Nm, and speeds up to 16,000 RPM. Ideal for complex machining tasks, the HERMLE C 1200 V machine we have for sale offers precision and durability. Contact us for more information. Application Types Milling