Used Sw Schwäbische Werkzeugmaschinen Ba 422 for sale (334)

Condition: good (used), Year of construction: 2011, The machine is in good technical condition, after prior agreement it is possible to test it. System: Siemens, 4 spindles, travel X/Y/Z 400 x 500 x 425 mm, max. speed 17,500 rpm, sliding table, 2x 36-position tool changer, tool holder HSK 63, Psljwf Rxnehcdwxepr chip conveyor,

Condition: good (used), Year of construction: 2008, Functionality: fully functional, GENERAL Project No: 905673 Quantity: 1 pc. Manufacturer: SW (Schwäbische Werkzeugmaschinen) Type: BA W04-22 Control: Siemens 840 D Year of Manufacture: 2008 Condition: Used Machine Shifts approx.: 2-3 shift DESCRIPTION MILLING Travel in X 400 mm Travel in Y 500 (775) mm Travel in Z 425 mm Max. rapid traverse in X/Y/Z 100/100/100 m/min Max. acceleration in X/Y/Z 14/14/20 m/s2 Feed force X/Y/Z 10000/10000/2×5000 N Linear glass scales X/Y/Z/A(U)/C1(C2)/W1(W2) Linear drive X/Y/Z Tool taper HSK-A 63 Max. speed milling spindle 17500 1/min Max. power at 10-40/100% duty ratio 35/26 kW Max. torque at 10-40/100% duty ratio 80/60 Nm Spindle diameter in front bearing 80 mm 2 pc. Horizontal milling spindle Spindle distance 400 mm Air-monitored tool clamping Pneumatic tool taper cleaning in milling spindle Torque support for multi spindle drilling heads Chain-type tool magazine 2×60 stations Max. tool diameter 80 mm Max. tool diameter without adjacent tools 160 mm Max. tool length 300 mm Max. workpiece weight 10 kg Chip-to-chip time 2,75 s Pallet changer 2 fold Max. workpiece weight per pallet 450 kg 2 pc. Swivel unit for clamping bridge Swivel unit NC-controlled 4 pcs. Rotary table NC-controlled (5th axis) – 2 pcs. per swivel unit Bridge dimensions 1030 mm Workpiece swing diameter 550 mm 2 Clamping bridge supports Hydraulic clamping 250 bar 4 pcs. Additional clamping circuit Air-monitored clamping of workpiece FURTHER EQUIPMENT IR-measuring probe Fully enclosed work area Automatic sliding door for loading area Pslhcdsu Diatewxopr Light in working area Oil-/emulsion mist extraction unit Scraper-type chip conveyor Discharge hight chip conveyor 1200 mm Machine operates/operated with emulsion Internal coolant supply Flush gun Coolant unit with paperband filter High pressure pump 70 bar Modem for remote diagnosis and TeleService Tapping without compensation chuck Additional control panel for tool management Warning lamp GENERAL TECHNICAL DATA Air supply 6 bar Operating voltage 3×400/50 V/Hz Total power requirement 133 kVA Transport dimensions of the machine (LxWxH) approx. 3680x5100x3250 mm Space requirement of the whole equipement (LxWxH) approx. 4350x7000x3100 mm Machine weight approx. 14500 kg REMARKS We described the specified product as accurate as possible. As it is not a product manufactured by us, the mentioned data can deviate. Herewith, we point out that the mentioned data are are non-binding and ask you to check them during your inspection.

Condition: good (used), Year of construction: 2011, The machine is in good technical condition, after prior agreement it is possible to test it. System: Siemens, type Sinumerik 840 D, travel paths X/Y/Z 600 x 550 x 360 mm, 2x spindle, Pslhswf Rf Ijcdwxjpr spindle distance 600 mm, max. speed 5,000 rpm, 2x 40-fold tool change, NC rotary table, operating hours approx. 91,457 h, chip conveyor,

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 2320005, travel distance X-axis: 550 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 375 mm, number of slots in tool magazine: 40, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Control: Siemens 840 DSL X-axis travel: 550 mm Y-axis travel: 450 mm Z-axis travel: 375 mm Tool changer Capacity: 40-station Tool holder: HSK63 Chip disposal Chip conveyor: Knoll 440S-1/250 Year of manufacture: 2017 Cooling system Coolant and lubricant treatment system: Knoll Further information according to the manufacturer - without guarantee Swivel table / counter bearing with face gearing: Swivel time 0 - 180° approx. 3.0 s Prepared for A and U axes: yes Support for X / Y clamping blocks: yes Speed range A and U axes: 1 - 50 rpm Speed range C-axis: 7-station 4-axis Speed range: 10 - 10,000 rpm (1 - 17,500 rpm) Ramp-up time t₀ - 4: 0.45 s Drive system: Ball screw Rapid traverse X / Y / Z: 75 / 75 / 75 m/min Tool change system: Pick-up Max. tool diameter: 70 mm / 160 mm (adjacent position free) Max. tool length: 275 mm Max. tool weight: 7.5 kg Transport dimensions L x W x H: 2.75 x 2.85 x 2.65 m Max. table load: 1,000 kg Ppelhcdwov Niqroxer Machine weight: 8.3 t Total connected load: approx. 64 kVA Control system: Siemens SINUMERIK 840 D

Condition: ready for operation (used), Year of construction: 2016, operating hours: 14,080 h, Functionality: fully functional, machine/vehicle number: 2390012, travel distance X-axis: 200 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 425 mm, spindle speed (max.): 17,500 rpm, number of slots in tool magazine: 184, tool length: 300 mm, tool weight: 10,000 g, Equipment: chip conveyor, System consists of the main machine SW BA 442 and 2 robots (M-10iA + M-20iD)! Including equipped tool magazine with extended capacity! TECHNICAL DETAILS Control: Siemens 840D SL Axes: 4 axes Change pallet: 2 swivel axes with 4 mounts each Spindle distance: 200 mm X-axis: 200 mm Y-axis (change position): 500 mm (775 mm) Z-axis: 425 mm Feed drive Design: three-phase synchronous motors Distance measurement (X, Y, Z): direct, absolute Rapid traverse speed X / Y / Z: 55 / 70 / 70 m/min Acceleration X / Y / Z: 8 / 8 / 12 m/s² Ppslhcdwevt Tyrjxjr Forces Peak force (X, Y): 15,000 N Peak force (Z): 12,000 N Nominal force (X, Y): 10,000 N Nominal force (Z): 7,000 N Accuracy Position tolerance (X, Y, Z): Tp = 0.008 mm Workpiece holder Design: Double swivel carrier (Q axis) with two directly driven NC rotary axes (A/U axis) Swivel time (0/180 degrees): 3.5 s Maximum asymmetrical load: 500 Nm Repeatability (at Ø 500 mm): < 0.006 mm Rotary axes (A/U axis) Maximum dimensions of fixture and workpiece: Ø 550 mm x 1,030 mm Maximum fixture and workpiece weight: 450 kg Peak torque: 870 Nm Nominal torque: 440 Nm Maximum speed: 50 rpm Angular acceleration: 3 / 6 / 12 U/s² Parting accuracy: ± 5'' Tangential moment: 3,000 Nm Spindle Arrangement: horizontal, side by side Design: motor spindle, liquid-cooled, AC synchronous technology Main spindle Ø: 40 mm Spindle lubrication: oil minimum quantity lubrication Tool system Interface: HSK-A63 Tool clamp nominal pull-in force: mechanically operated, > 18 kN Wear limit: 16 kN Setting dimension: 10.5 ± 0.1 mm Pneumatics: cleaning air, planar contact control Cooling lubricant: central, emulsion, oil, < 80 bar Minimum quantity cooling lubricant: aerosol, < 5 bar Speed and power Speed range: 1 - 17,500 rpm Ramp-up time: 1.2 s Power: 4 x 32 kW at 4,200 rpm or 40% ED Nominal power: 4 x 25 kW at 4,200 rpm Torque: 4 x 72 Nm at 40% ED Nominal torque: 4 x 55 Nm Tool magazine Change system: pick-up Tool management: fixed location coded Capacity: 182 tools (4 x 46) Tool diameter with/without free neighbor: 150 / 80 mm Tool length: 300 mm Tool weight: 10 kg Maximum total tool load: 720 kg Average chip-to-chip time (n < 10,000 min⁻¹): 3.0 s MACHINE DETAILS Installation space (W x H x D): 4.38 x 5.00 x 7.00 m Machine weight in operation: 22,000 kg Transport weight: 14,500 kg Measuring surface sound pressure level (DIN EN 12417:2007): ≤ 75 dB(A) Switch-on time: 34,823 h Spindle time: 14,080 h Electrical connection data Connection voltage: 3 x 400 V, 50 Hz (earthed) Connection type: TN-S or TN-C network Total connected load: 123 kVA Rated load factor (RDF): 0.6 Back-up fuse: 160 A gG (5 s) Coolant supply Chip conveyor: Knoll make Coolant supply/filter system: Knoll make, type 800K-1, year of manufacture 2016

Condition: refurbished (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 163123, travel distance X-axis: 3,300 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS CNC control: Siemens 840D retrofit in 2014 X-axis travel: 3,300 mm Y-axis travel: 620 mm Z-axis travel: 800 mm (only with swivel bridge removed) Polhcjvprr Sodwxepr Table Clamping surface: 3,500 mm x 650 mm Clamping surface with swivel bridge removed: 1,600 mm x 650 mm Spindle Speed range up to: 10,000 /min Tool holder: ISO SK 40 Axis drives Rapid traverse: 25,000 mm/min Tool magazine Magazine type: chain magazine Number of tool positions: 60 MACHINE DETAILS Connection voltage: 400 V Mains frequency: 50 Hz Length x width x height: 7,700 mm x 3,677 mm x 3,532 mm Machine weight: approx. 17,500 kg EQUIPMENT - Chip conveyor - IKZ 40 bar - Control cabinet air conditioning - Control system retrofit in 2014 - Linear guides X-axis and Y-axis including roller guide carriage replaced in 2015 - Linear guides Z-axis including roller guide carriage replaced in 2017 - Main spindle re-bearing including all Heidenhain encoders and overhaul of the hydraulic tool clamp in 2015 - KGT X-axis in 2021 - KGT Y-axis in 2016 - KGT Z-axis in 2018 - Worm gear Fibro Plan in 2014 - A complete zero-point clamping system is also included with the machine.

Condition: used, Year of construction: 2000, travel distance X-axis: 1,800 mm, travel distance Y-axis: 425 mm, travel distance Z-axis: 400 mm, table load: 800 kg, included: - Chip conveyor with integrated IKZ system Pjljq Ebhnjhcdwxspr - Various fixture beams and accessories (rotary axis) - Various spare parts, clamps, pliers, ..... - Complete machine documentation/folder with maintenance/repairs, ... Offer on request

Year of construction: 1999, Condition: excellent (used), Control Siemens 840 D Travel X / Y / Z 1800/425/400 mm Tool magazine for 36 tools SK40 Spindle Speed 5,000 rpm Clamping surface 2560x450 mm Chip conveyor Poljgmh Nkjhcdwxjpr

Condition: good (used), Year of construction: 2011, Functionality: fully functional, GENERAL Project No: 905654 Quantity: 1 pc. Manufacturer: SW (Schwäbische Werkzeugmaschinen) Type: BA W06-22 Control: Siemens 840 D Year of Manufacture: 2011 Condition: Used Machine Shifts approx.: 2-3 shift DESCRIPTION MILLING Ppolhjry Ukvecdwxsr 4 Axis Travel in X 600 mm Travel in Y 600 (875) mm Travel in Z 500 mm Max. rapid traverse in X/Y/Z 100/100/100 m/min Max. acceleration in X/Y/Z 12/10/20 m/s2 Feed force X/Y/Z 10000/10000/2×5000 N Linear glass scales X/Y/Z/A(U)/C1(C2)/W1(W2) Linear drive X/Y/Z Tool taper HSK-A 63 Max. speed milling spindle 17.500 1/min Max. power at 10-40/100% duty ratio 35/26 kW Max. torque at 10-40/100% duty ratio 80/60 Nm 2 pc. Horizontal milling spindle/-s Spindle distance 600 mm Air-monitored tool clamping Pneumatic tool taper cleaning in milling spindle Chain-type tool magazine 2×36 stations Max. tool diameter 80 mm Max. tool diameter without adjacent tools 160 mm Max. tool length 350 mm Max. workpiece weight 10 kg Pallet changer 2 fold Max. workpiece weight per pallet 600 kg 2 pc. Swivel unit NC-controlled Bridge dimensions 1430 mm 2 set Clamping bridge supports Hydraulic clamping 4 Additional clamping circuit/-s Air-monitored clamping of workpiece FURTHER EQUIPMENT 2 pc. IR-measuring probe Tool breakage monitoring Fully enclosed work area Automatic working range sliding door Light in working area Preparation for central oil-/emulsion mist extraction unit Scraper-type chip conveyor Internal coolant supply Flush gun Coolant unit with paperband filter High pressure pump 70 bar Interface for gantry loader or robot Modem for remote diagnosis and TeleService Tapping without compensation chuck Warning lamp GENERAL TECHNICAL DATA Air supply 7 bar Operating voltage 3×400/50 V/Hz Total power requirement 133 kVA Transport dimensions of the machine (LxWxH) approx. 3680x5400x3250 mm Space requirement of the whole equipement (LxWxH) approx. 4800x7500x3300 mm Machine weight approx. 16000 kg REMARKS We described the specified product as accurate as possible. As it is not a product manufactured by us, the mentioned data can deviate. Herewith, we point out that the mentioned data are are non-binding and ask you to check them during your inspection.

Condition: excellent (used), Year of construction: 2012, CNC - 2 Spindle Horizontal Machining Centre, second-hand Immediately available / ready for operation Manufacturer: Schwäbische Werkzeugmaschinen - Schramberg, Germany Typ: SW BA 322 / Siemen 840 D sl: auf Windows basis und Power Line Servoantriebstechnik Year of construction: 12 / 2012 Axes: X 300 mm; Y 450 mm; Z 375 mm Work spindle: HSK 63 1-10.000 rpm. 25kW at 4,200 rpm. internal coolant supply 40 bar Tool magazine: Pick-up system; capacity 40 (2x20) tool places Workpiece holder; swivel carrier system Q - axis; Two independent swivel axes A - and U - axes Workpiece clamping hydraulics, workpiece support control Coolant system: 1,200 l; paper belt filter, cartridge filter, heat exchanger, high-pressure pump Chip conveyor: Scraper belt conveyor with lifting pump, ejection height 1,100 mm Automatic loading door Automatic rinsing cycle, manual spray gun Machine condition: cleaned, filled with necessary medium in clean condition and is in working order The machine has been checked by SW Maschinen-Service and can be inspected at any time by appointment. Delivery: by arrangement, free loaded ex works, Ppjlhelxp Ufocdwxsr subject to prior sale

Condition: good (used), Year of construction: 2008, travel distance X-axis: 600 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, SW BAS 03 - 12, Pjlhcdweulk Ugexepr Year of construction 2008 Siemens 840 D control system, Travel X/Y/Z 600/400/400 mm, spindle speed up to 17,500 rpm, HSK 63 holder, tool changer 40 times, NC swivel table 450 x 830 mm, max. table load 400 kg, Minimum quantity lubrication, water cooler, IKZ 40 bar, scraper belt conveyor,

Condition: like new (used), Year of construction: 2023, operating hours: 700 h, Functionality: fully functional, travel distance X-axis: 200 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, rotational speed (min.): 1 rpm, rotational speed (max.): 25,000 rpm, coolant supply: 80 bar, Equipment: chip conveyor, documentation/manual, 4 Machines Available with identical configuration. Each machine ahs less than 700 spindle hours !!! Horizontal twin-table machining center with 2 spindles SPECIAL MACHINE FEATURES -Monobloc design -Linear and torque motor in the feed axes -Gantry drive in the Y axis -Mass optimized machining unit Box-in-open-Box -Workspindle optionally with HSK A40 or HSK E40 taper -Double swivel carrier with 2 integrated rotary axes for in-cycle loading / unloading -Trend-setting technologies that boost energy efficiency -Central workstation Description The BA W02-22 is a horizontal, twin-spindle machining center. Mainly used for 4- and 5-axis machining of small non-ferrous metal workpieces. The linear and torque motors of the feed axes guarantee with a maximum workpiece accuracy, the highest possible dynamics and very short non-productive times. In order to ensure loading and unloading in parallel to the machining time, the BA W02 is equipped with a double swivel trunnion Linear motors The use of linear motors in the feed axes X, Y and Z makes it possible to achieve speeds of 120 m/min (X- and Y-axis) and accelerations up to 22 m/s² (Z-axis). Linear motors have significant advantages over conventional drives with ball screws in terms of energy, wear and noise emissions. Three-phase synchronous motors are used in the BA W02-22. Workspindle Two different motor spindle types are available with HSK 40 interface for the BA W02-22. HSK A40, 25,000 rpm: This synchronous motor spindle features high dynamics. It has a core spindle with a very low mass moment of inertia. This allows for a very short run-up time to a maximum speed of 25,000 rpm with a constant high torque. This results in a consistently short chip-to-chip time over a speed range up to 10,000 rpm and best times for thread cutting. TECHNICAL DESCRIPTION OF STANDARD MACHINE - BA W02-22 WORKING RANGE Ppslheu Im Enscdwxer linear axes Spindle distance 250 mm X axis 200 mm Y axis (tool change position) 350 mm (525mm) Z axis 300 mm WORKPIECE CARRIER A/U Swivel carrier system with plane surface gear teeth (Q-axis) Swivel time 0° / 180° 2.25 s Max. asymmetrical loading Repeatability accuracy relative to 500 mm 0.005 mm Two independent rotary axes (A-axis/U-axis), suitable for holding clamping bridges. The rotary axes, each consisting of a directly driven NC rotary tables with direct and absolute angle measurement and a counter bearing Max. dimension of fixture/workpiece 425mm x 630mm Max. weight of fixture/workpiece 160kg Peak torque (standard) 420 Nm WORKSPINDLE HSK A40 Liquid-cooled motor spindle based on AC synchronous technology Speed range 1-25,000 rpm

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 1800027, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Chip conveyor: present Control system: Siemens 840D Coolant and lubricant processing system Ppolhjv N Iimocdwxor Manufacturer: Knoll Type: AE1058 Year of construction: 2004

Condition: good (used), Year of construction: 2003, Functionality: fully functional, Attention: For sale are 2 machines SW BA600-2 which are identical! (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. Ppelhcdsunzqqewxor No private sales.

Condition: used, Year of construction: 2007, Double-spindle machining center in 5-axis design (on both sides) Travel x/ y/ z = 600/ 600(975) / 500 mm Number of spindles 2 Spindle distance 600 mm Rapid traverse 45 m/min Spindle speed up to 17,500 rpm Drive power 38 kW Tool magazine 2 x 72 tool positions HSK 63 tool holder CNC control Siemens 840D 1 x tool breakage control 2 x clamping bridge support H75 mm 2 x clamping bridges 5th axis Ppjlhcdotgu Ixswxer Knoll coolant system, 70 bar 1 x chip conveyor KB1000 1 x drill head indexing 2 x tool planning system control 2 x A/U axis torsion compensation upgrade kit

Year of construction: 2013, Condition: excellent (used), Total power value: approx. 133 kVA Back up fuse: 250A Compressed air quality according to ISO 85731: purity class 4 Connection pressure: max. 9.5 bar Operating pressure: min. 7 bar Number of spindles: 2 Spindle arrangement: vertical, side by side Spindle distance: 600 mm Spindle bearing diameter: 90 mm Spindle with max 12000 rpm Ramp up time: 0 10,000 kin 1 approx. 0.8 s Travel X axis: 600 mm Travel Y axis (change position): 600 (875) mm Pelhcdwsfkvvljxjpr Travel Z1-,Z2 axis: 500 mm Tool changing system: Pick up Tool spindle: HSK 80 Tool places: 70 Max. Tool diameter: 90 mm Max. Tool length: 540 mm Max. Tool weight: 10 kg Max. Magazine load: 350 kg

Condition: ready for operation (used), Year of construction: 2017, operating hours: 19,403 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D Solution Line, spindle speed (max.): 17,500 rpm, coolant supply: 70 bar, spindle nose: HSK63, number of spindles: 2, number of slots in tool magazine: 144, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Precision machining center, Siemens Sinumerik 840 D Solution Line control, travels: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 work spindles 1-17,500 rpm, torque motor drive system, equipment includes: Oil distributor for rotary table, pneumatic pressure booster, total magazine extension 144 tool positions (2 x 72), basic hydraulic clamping module, 70 bar high-pressure pump, emulsion mist separation system, automatic loading door, air monitoring, inductive tool breakage monitoring, KNOLL 800 K-1/400 scraper belt conveyor, KNOLL FKA 1200 compact belt filter for cleaning cooling lubricant and much more. Ppjlhcswgh Hlsdwxer

Condition: used, Year of construction: 2017, operating hours: 49,902 h, machine/vehicle number: 2080451, Precision machining center, Siemens Sinumerik 840 D Solution Line control, travels: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 work spindles 1-17,500 rpm, torque motor drive system, equipment includes: Oil distributor for rotary table, pneumatic pressure booster, total magazine extension 144 tool positions (2 x 72), basic hydraulic clamping module, 70 bar high-pressure pump, emulsion mist separation system, automatic loading door, air monitoring, inductive tool breakage monitoring, KNOLL 800 K-1/400 scraper belt conveyor, KNOLL FKA 1200 compact belt filter for cleaning cooling lubricant and much more. Pslhcdov Tv Ekewxjpr

Condition: good (used), Year of construction: 1996, rotational speed (min.): 50 rpm, rotational speed (max.): 10,000 rpm, - Vertical machining center - second hand- - SW - BA 18 - yom 1996 - working rang long version 1500 x 350 x 350mm Pslhjg Dggujcdwxjpr - working range double place version 2 x (500 x 350 x 350mm) - tool tapper SK 30 - ATC 36 - control: SIEMENS 820 (more details see *.pdf) - acessories: WITHOUT vices, with app. 100 pieces toolholders - transport dimensions: - Machine L x W x H = 4,2 x 2,2 x 2,7m - 6000kg - chip convoyer L x W x H = 4,2 x 1,2 x 1,6m - 600kg - accessories L x W x H = 0,8 x 0,6 x 1,6m - 200kg

Condition: used, Year of construction: 2011, x-travel 400 mm Pslevxa Srshcdwxspr y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Changeover table - Chip conveyor, Knoll Type 800 K-1 Year 2017 - Cooling system Knoll Type FKA 1200 Year 2011 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2015, x-travel 400 mm y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 Ppolhjvxa Tijcdwxjr number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Changeover table - Chip conveyor, Knoll Type 800 K-1 Year 2014 - Cooling system Knoll Type FKA 1200 Year 2015 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2015, x-travel 400 mm y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Changeover table - Chip conveyor, Knoll Type 800 K-1 Year 2011 Pjlhjvxa Sxjcdwxspr - Cooling system Knoll Type FKA 1200 Year 2015 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2011, x-travel 400 mm y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected Ppjlhcov Hhu Rsdwxsr under power by appointment. Technical features & accessories: - Changeover table - Chip conveyor, Knoll Type 800 K-12011 - Cooling system Knoll Type FKA 1200 Year 2011 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2014, x-travel 400 mm y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Changeover table - Chip conveyor, Knoll Type 800 K-1 Year 2014 - Cooling system Knoll Type FKA 1200 Year 2011 Pjlov Hhvbshcdwxspr Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2013, x-travel 650 mm y-travel 650 mm z-travel 550 mm Control Sinumerik 840 D sl Number of boring spindles 2 St. spindle tunring speed 10.000 U/min spindle distance 700 mm number of tool places 2 x 35 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor, Pslhcdwevw Dzzsxspr Knoll Type 1000 K-1/700 Year 2022 - Cooling system Knoll Type FKA 1200 Year 2022 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!