Used Cormak Fm230 Z Filtrem Pyłowym for sale (22,457)

Condition: new, Year of construction: 2026, The CORMAK H - 260SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Cut range Ø260 or 260 x 260 Tape 3150 x 27 x 0.9mm Ncsdpeiz S I Hefx Am Uew Cut speeds 40/60/80m/min Engine 2.2kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder stroke 500mm Load capacity 1500 kg Dimensions 1600 x 1800 x 1550mm Weight 1000 kg Max. cutting range angle 0º ø260 260 × 260 Standard equipment work in automatic cycle arm position memory function built-in hydraulic unit vise position memory function change cutting speed motorized belt cleaning brush cooling system bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Condition: new, Year of construction: 2026, The CORMAK H - 280 SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Ncodpfx Amsiz S Nys Uew Cut range Ø280 or 280 x 280 Band saw blade 3505 x 27 x 0.9mm Cut speeds 40/60/80 m/min. Engine 3kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder pitch 500mm Load capacity 1500 kg Dimensions 1750x1900x1550mm Weight 1100 kg Max. cutting range angle 0º ø280 280 × 280 Standard equipment work in automatic cycle arm position memory function built-in hydraulic unit vise position memory function change cutting speed motorized belt cleaning brush cooling system bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Condition: new, Year of construction: 2026, The CORMAK H-350SA column band saw is a high-performance machine for cutting solid workpieces and profiles in an automatic cycle. Robust body and sturdy saw frame in combination with the column structure ensure excellent rigidity and exceptional stability during cutting even the most difficult-to-cut metals. The cutting-off machine is equipped with PLC control and an easy-to-use touch screen. The undoubted advantage of The unquestionable advantage of this model is its swivel head which allows cutting in the following ranges 0°- 60° - in automatic cycle as well as semi-automatic - infinitely adjustable angle. angle adjustment. Ncedpfowdunwsx Am Uow Manual and Automatic mode: The cutting-off machine allows both manual operations from the machine control panel in manual mode and an automatic cutting cycle in automatic mode, eliminating the need for constant operator assistance. Vise top pressure: The cutting machine is adapted to package cutting Automatic Cutting Cycle: In automatic mode, the entire cutting process, including clamping the workpiece, moving it to the specified dimension, lowering the cutting arm and raising it after the cut is completed, is carried out without operator intervention. Panel Controlled Parameters: Cutting parameters such as number of pieces, workpiece dimensions, belt speed, and more, are set and controlled via a control panel with an easy-to-use touchscreen. Robust Construction: The machine body is made of cast iron set on a rigid, space-age slab chassis structure for exceptional rigidity and stability. Cutting belt drive: A powerful three-speed motor, hydraulic belt tension and cooling system and cleaning brush contribute to precise and efficient cutting. Safety System: If the cutting belt breaks, the machine stops automatically, increasing operator safety. Hydraulic Material Feeding System: This system allows the machine to cycle fully automatically, with precise setting of the material feed length. Innovation and ISO Standards: Cormak provides innovative solutions and production in accordance with ISO:90001 and ISO:140001, which demonstrates the high quality, safety and reliability of the product. Technical data: Cutting range Ø350 or 350 x 350 Belt 4515 x 34 x 1.1 mm Cutting speeds 27/45/69 m/min. Total power 4.8kW Hydraulic power pack 0.75kW Coolant pump 0,04kW Belt tensioning hydraulic Feeder stroke 500 mm Load capacity 1500 kg Table height 700 mm Dimensions 2800 x 2200 x 1700 mm Weight 1500kg

Condition: new, Year of construction: 2026, functionality: fully functional, New, FM230-L1 low-noise vacuum extractor. Large design and powerful vacuum allows for removing sawdust and chips from machines and floors. Nodpfx Amjvu A Eas Uecw Machine features Extractor with a powerful vacuum (horizontal system rotor) Metal, balanced rotor Strengthened motor Workplace vacuuming capability Large bags capacity Wide suction nozzle in the set Portable due to large wheels Ergonomic handle for machine manoeuvring Quiet work, high efficiency Due to its small size it doesn't take a lot of space in the workshop Many years of our team's effort resulted in creating a WhirlWind series multi-wing metal rotor, which, along with the rigid metal body, constitutes the heart of the extractor. Vacuum air-flow perfectly sucks out excess amount of sawdust produced during machining wood. Large design of the extractor is equipped with a solid frame providing stability and vibration-free operation. Entire construction is also strengthened with appropriately thick supports, which hold the cylinders along with the weight of the waste bags in proper position. Another advantage is the usage of an elastic and durable gasket, located in the integral part of the machine in order to improve the tightness of the entire system. By default, our extractors are equipped with burlap (filtering and waste) as well as additional, disposable, durable, plastic waste bags. Elastic metal bands ensure long-term reliable bags replacement. Usage of rotary wheels in bearings provides quick relocation of the machine. Technical data S1 continuous work motor power 0.75 kW Speed 2800 rpm Suction efficiency 1150 m3/h Bags capacity 90 L Number of bags 2 Extracting connector diameter 100 mm Height 1550 mm Width 420 mm Length 800 mm Voltage 230V Weight 27 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Adjustable extraction for lathes with a wheeled base, ensuring effective extraction of dust and chips. The set includes a 56-liter chip bag and a 230 x 125 mm connector. The perfect choice for professional turners and hobbyists, ensuring a clean and safe workshop. Product characteristics: The sawdust extractor for wood lathes is a reliable tool that guarantees effective extraction of dust and chips when processing materials. Its main feature is the adjustable nozzle, which allows you to precisely adjust the suction to specific needs and working conditions. This allows you to effectively keep the area around the lathe clean, eliminating potential health and safety hazards. Nsdpfjvu Aprsx Am Uocw The extractor is equipped with a solid base with wheels, which allows it to be easily moved and placed in different places in the workshop. Regardless of whether the machine is used in a fixed location or requires frequent relocation, the extractor will certainly meet your expectations in terms of mobility and comfort of use. The scope of delivery of the extractor includes a chip bag with a diameter of 380 mm and a length of 530 mm, with a capacity of 56 liters. Thanks to the large capacity of the bag, you can easily work for a long time without having to empty it frequently. Additionally, the set includes an extraction stub with dimensions of 230 mm (length) by 125 mm (height), which ensures reliable and effective connection of the extraction device to the lathe. No matter whether you are a professional turner or a hobbyist, a lathe extraction device with an adjustable spigot and a mobile base will certainly help you keep your workshop clean and ensure safe working conditions. This extract will also work: Planers Planners Thickness gauges Milling machines Banding machines Format saws Technical data ENGINE POWER 0.75kW TENSION 230V / 50Hz WASTE BAG CAPACITY 56 years old SUCCATION PERFORMANCE 1000 m3/h SUCTION PIPE DIAMETER 100 mm FAN DIAMETER 230 mm VACUUM 1030 Pa SOUND PRESSURE LEVEL

Condition: new, Year of construction: 2026, functionality: fully functional, The FM 230N transport fan is a professional solution for the local extraction of sawdust, wood chips, and dust generated during wood processing. Its compact design, durable motor, and high efficiency make this sawdust blower an ideal component of dust extraction systems in carpentry shops, workshops, and for single- or multi-spindle machines. Key Advantages Effective sawdust extraction – capacity of 1000 m³/h enables efficient removal of contaminants directly from the workplace 0.75 kW motor – provides adequate torque with low energy consumption High impeller speed – 2950 rpm ensures intensive airflow 100 mm inlet diameter – allows easy connection to commonly used machines and systems Low weight (15 kg) – facilitates easy transport and installation at various workstations Design and Technology The FM 230N fan features a closed, welded steel construction with the impeller mounted directly on the motor shaft. This design eliminates power losses associated with belt drives and minimizes vibration. The housing has been optimized for airflow, ensuring stable operation even during continuous use. The electric motor is powered by 230V at a standard frequency of 50 Hz, allowing universal application in most workshops without the need for three-phase power installation. Precision and Performance The FM 230N is designed for highly efficient transport of air containing lightweight wood particles. Thanks to its optimized impeller and airflow channel, the unit minimizes air resistance, enabling uninterrupted operation even with large volumes of chips and sawdust. It performs equally well as a transport fan for sawdust or as a local blower supporting woodworking machines. Applications The FM 230N is suitable for carpentry workshops, furniture manufacturing plants, and production facilities using machines that generate dust. It can operate independently or as part of a larger dust extraction system. Particularly recommended for use with: planers and jointers thickness planers spindle moulders edge banders circular saws Standard Equipment powder-coated steel housing Ncodpfx Amevu Ad Aj Uew 100 mm inlet port stable mounting base single-phase 230V motor Optional Equipment 100 mm flexible hoses dust collection bags Technical Specifications Parameter Value Motor power 0.75 kW Speed 2950 rpm Extraction capacity 1000 m³/h Inlet diameter 100 mm Outlet diameter 110 mm Voltage / Frequency 230 V / 50 Hz Dimensions (L × W × H) 430 × 400 × 340 mm Weight 15 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description Ncedpfx Amjvu Uwue Uew Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 4 mm/0.02 mm vernier

Condition: new, Year of construction: 2026, functionality: fully functional, 600x240 mm Cross Table Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description Nsdpfx Aovu Trwsm Uocw Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 4 mm/0.02 mm vernier

Condition: new, Year of construction: 2026, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Njdpsvu Tp Asfx Am Ujcw Table description Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 2.5 mm/0.02 mm vernier

Condition: new, Year of construction: 2026, functionality: fully functional, Precise cross table with screw cover, sliding guides made using the "dovetail" method significantly improve the stiffness of the table and enable the elimination of play in feeds. Description of the cross table The cross table is solidly made of high-quality materials. Ideally supports work on drilling machines, milling machines, etc., thanks to which we achieve precise positioning when boring or drilling. Nedpfxjvu Tn So Am Uscw Cross table equipped with a swivel base with a 360°/3mm pitch. Screw cover prevents chips from entering the feed working mechanism. An additional advantage of the table is a strip scale that facilitates constant viewing of the table's position in the X and Y axis Nonius 4 mm/0.02 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description of 185x100 mm Cross Table Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is a pitch, which simplifies telling the X,Y axes position of the table 2.5mm/0.02mm vernier Nedpovu Tqysfx Am Uscw

Condition: new, functionality: fully functional, Year of construction: 2026, Beam extensions for gantry cranes – increase the reach of your crane Beam extensions are professional accessories for gantry cranes that allow you to increase the working width of the structure. They are used wherever the standard crane width is insufficient – particularly in wide production halls, warehouses and industrial facilities. Manufactured from durable and resistant materials, they ensure reliability and long service life even in intensive working environments. Greater functionality and safety The extensions allow for easy adaptation of the crane to individual requirements, expanding its range of applications without the need to purchase a larger model. The maximum lifting capacity of the crane with extensions is 800 kg. However, it should be noted that when the extension exceeds 200 mm, the load capacity is further reduced. For this reason, it is essential to follow the manufacturer’s guidelines and carry out regular technical inspections of all crane components, including the extensions. Key product features: Enable quick and safe increase of the crane’s working width Simple installation – the set includes two extensions ready for mounting Robust construction – high-strength steel profiles Operational safety – compliant with industrial standards and health and safety requirements Compatible with CORMAK gantry cranes and other structurally compatible models Usage guidelines: Ncsdpfjycqh Nsx Am Ujw Gantry crane extensions should be used in accordance with the manufacturer’s recommendations, particularly with regard to the reduction in load capacity after installation. The minimum extension width is 200 mm, and each additional increase results in a further reduction of the maximum lifting capacity. Regular technical inspections and proper maintenance are essential to ensure full operational safety. Applications of beam extensions The product is ideally suited for industries such as logistics, industrial manufacturing, steel structure assembly, the automotive industry and others. Versatility, durability and build quality make it an excellent choice for companies that expect flexibility and reliability from their equipment. By choosing CORMAK beam extensions, you invest in efficiency, functionality and safety. Extend the capabilities of your gantry crane and adapt it to changing production or warehouse requirements! Technical parameters: Length 520 mm Width 131 mm Height 70 mm Number of pieces per set 2 Set weight 20 kg

Condition: ready for operation (used), Year of construction: 2008, grinding length: 1,600 mm, grinding width: 630 mm, Surface grinder 1600 x 630 M7163x16100, magnetic table size 1600 x 630, machine length 5400mm, depth 2500mm, height 2600mm. Automatic feeds in the X and Y axes. We are the first owners; the machine is used on average for a few hours a month for service-related grinding. Year of manufacture: 2008. Power: 22KW, 60A. Shipping costs are borne by the buyer. We can arrange complete container shipping, including packing and loading. Here are two packing options: Option 1 Ncjdpfey Shzaox Am Usw Packing on a pallet + aluminum foil and moisture absorbers Requires a 40' HC container. This is the recommended option, as the vacuum foil and absorbers create a protective barrier against moisture and salt. Cost, including loading and securing the machine in the container: 1800 EUR (net). Option 2 Packing without a pallet, aluminum foil, or absorbers. Loading only into a 40' OT container. Cost: 850 EUR (net). Note: In this case, the machine will be more exposed to moisture and salt. Example cost of TRANSPORT ORGANIZATION SERVICE – freight forwarding (all-in), loading Częstochowa, PL, unloading 121001 India, IN, 40 HC, port-to-port, approximately 40 days: 5,050.00 USD.

Condition: new, functionality: fully functional, Year of construction: 2026, A mobile loading ramp with a load capacity of 8,000 kg is a professional and modern solution for logistics, industrial, and distribution companies that require an independent and flexible loading station. Thanks to its electric lifting and lowering system, it enables fast and safe connection between ground level and the loading surface of trailers, containers, and trucks – regardless of their height. It is an indispensable tool in locations without permanent loading infrastructure or where rapid adaptation to changing operational needs is required. Main Advantages of the Ramp 8,000 kg load capacity – safe handling of heavy loads and fully loaded forklifts. Electric lifting actuator – fast and effortless height adjustment of the ramp. Control panel – intuitive operation, mounted directly on the ramp structure. Anti-slip surface – ensures stable forklift movement in all conditions. Side safety rails and wheel locks – enhanced safety in the loading area. Mobility – easy relocation of the ramp using a forklift. Durable welded steel construction – resistant to deformation and intensive use. Construction and Technology The ramp has been designed for maximum strength, durability, and ease of operation. The structure, based on steel profiles and transverse reinforcements, allows forklifts to transport heavy goods without the risk of platform deformation. The anti-slip chequered steel plate covering the entire ramp surface ensures excellent traction even during rain, snow, or in the presence of industrial dirt and debris. The electric actuator enables safe, fast, and precise positioning of the ramp at the required height – from 1,100 mm to 1,650 mm. The entire control system is integrated into the ramp structure, eliminating the need for additional external devices and significantly speeding up preparation for operation. Precision and Operational Safety The ramp is equipped with wheel locks and a ground stabilization system, ensuring safety during operation even under maximum load. Mechanical side protections and properly profiled safety rails protect operators from accidentally slipping off the ramp during maneuvering. The rigidity of the entire structure eliminates the “bending” effect even during intensive use, ensuring smooth forklift movement across the ramp. Mobility and Flexibility Standard Equipment Electric lifting actuator with control panel Anti-slip chequered steel plate along the entire ramp length Integrated wheels for easy ramp relocation Forklift transport hooks Side safety rails and mechanical protections Wheel locks and ramp stabilization system Specification Value Ncedpfjy Sf N Ijx Am Usw Load Capacity 8,000 kg Total Length 11,450 mm Horizontal Section Length 2,950 mm Container Lip Length 450 mm Inclined Section Length 7,000 mm Folding Lip Length 750 mm Ramp Width 2,000 mm Overall Width 2,100 mm Minimum Height 1,100 mm Maximum Height 1,650 mm

Condition: new, Year of construction: 2026, CORMAK C2141 ATC PREMIUM CNC Router (2100 × 4200 mm) Ncjdpfx Amovupu Uo Uew 1. Worktable Sectioned vacuum worktable with four independent vacuum zones, manufactured from rigid and durable HPL panels. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces of various sizes. The worktable surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. 2. HQD Spindle High-performance 9 kW brushless HQD spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system, ensuring reliable operation and low maintenance. 3. Drive System Energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, delivering excellent machining quality while maintaining high feed rates. Brushless servo motors drive the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for maximum durability and long-term reliability. Professional HIWIN linear guide rails are installed on all axes and undergo strict quality inspection. A centralized automatic lubrication system continuously lubricates the linear bearing blocks and ball screw, minimizing maintenance requirements and extending component life. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining, resulting in improved machining accuracy and superior surface finish. 5. 8-Position Automatic Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump & Dust Extraction Hood (Optional) Four independent vacuum zones for efficient workpiece clamping. 7. Industrial Control System & Software Equipped with the NK-105 G3 CNC control system. Compatible with the latest CAD/CAM software solutions. Optional UCanCAM V13 software available in Polish/English versions. Technical Specifications Working Area 2100 × 4200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 2 × 7.5 kW vacuum pump Software Optional UCanCAM V13 (Polish/English version) Machine Dimensions 5070 × 2870 × 1900 mm Machine Weight 3350 kg

Condition: new, Year of construction: 2026, Machine Description 1. Worktable Sectioned vacuum worktable with FOUR independent vacuum zones, manufactured from rigid and durable HPL panels. Each zone features vacuum ports connected via a piping system to the vacuum pump. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces in various sizes. T-slots are also provided for manual workpiece clamping when required. 2. HQD Spindle High-quality 9 kW brushless HQD spindle, powered by an inverter with built-in overload protection. High-speed electro-spindle equipped with an innovative air-cooling system. Designed for automatic tool changing (ATC), significantly reducing machining time by eliminating manual tool changes. 3. Drive System High-performance, energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, ensuring excellent machining quality at high feed rates. Brushless servo motors driving the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Nedpjvupcrofx Am Uocw X and Y axis movement is transmitted through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for long-term reliability. All axes are equipped with professional HIWIN linear guide rails, which undergo strict quality inspections and testing throughout the manufacturing and assembly process. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining operations, resulting in improved surface finish and machining accuracy. 5. 8-Position Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC), supplied with ISO30 tool holders and ER32 collets. Included collets: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump (Optional) & Dust Extraction Hood Four independent vacuum zones for efficient workpiece holding. Pneumatically operated dust extraction hood mounted around the spindle, allowing connection to virtually any dust extraction system while maintaining a clean working environment, improving operator safety, and preserving machining accuracy. Technical Specifications Parameter Value Working Area 2100 × 3200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump 2 × 7.5 kW (optional) Software UCanCAM V13 (Polish language version, optional) Machine Dimensions 4070 × 2870 × 1900 mm Machine Weight 2050 kg

Condition: new, Year of construction: 2026, 60-Ton Machinery Moving Skate Set The 60-ton machinery moving skate set is an industrial-grade solution designed for the efficient and safe transportation of extremely heavy loads, including production machinery, structural components, and industrial equipment. The system consists of transport skates and steering handles, providing precise maneuverability even in demanding operating environments. Engineered to meet the highest standards of strength and stability, this transport set is an indispensable solution for industrial, logistics, and construction applications. Key Features 60,000 kg load capacity – Enables the safe and controlled movement of exceptionally heavy equipment. Heavy-duty steel construction – Designed to withstand extreme loads, impacts, and intensive industrial use. 30 × 65 mm transport rollers – Manufactured from wear-resistant, non-marking material and arranged in a crawler-style configuration for smooth operation. Anti-slip loading pads – Increase friction between the load and the platform, minimizing the risk of shifting during transport. Compact dimensions with a low loading height (140 mm) – Allow easy maneuvering in confined spaces, workshops, and technical corridors. Steering handle with ±90° turning angle – Provides precise directional control, even in areas with limited maneuvering space. Design and Engineering – Built for Maximum Loads Ncedpfxjzh E D Ue Am Uow The transport set has been engineered with durability, safety, and ease of operation in mind. Its main structural components are manufactured from heavy-duty steel sections, ensuring a long service life and excellent resistance to bending and torsional stress under high loads. The transport rollers provide low rolling resistance, while their precision-mounted bearing arrangement minimizes vibration and ensures smooth movement of the transported load. Main Components Transport skate – Equipped with a Ø150 mm load-bearing surface and 30 × 65 mm rollers that provide optimal load distribution. Steering handle (880 mm) – Allows precise directional control and effortless maneuvering, even in confined work areas. Connecting bar (1,000 mm) – Enables adjustment of the spacing between the transport skates to accommodate different load widths. Precise Maneuverability and Maximum Safety Thanks to its precision-engineered design, the transport skate set provides stable, smooth, and safe movement of even the most demanding heavy loads. The anti-slip loading surface reduces the risk of load movement during transport, while the compact design allows operation in narrow passages and restricted workspaces. The integrated steering system gives the operator full control over every movement of the transport set, even on uneven surfaces or in areas with limited visibility. Standard Equipment 2 × Transport skates with 16 rollers (30 × 65 mm) each 2 × Steering handles, 880 mm long 2 × Connecting bars, 1,000 mm long Technical Specifications Specification Value Roller Size 30 × 65 mm Load Capacity 60,000 kg Loading Height 140 mm Load Bearing Surface (per skate) Ø150 mm Support Points 1 Steering Handle Length 880 mm Steering Angle ±90° Overall Dimensions (L × W) 320 × 155 mm Platform Dimensions (L × W) 130 × 130 mm Connecting Bar Length 1,000 mm Adjustable Skate Spacing 120–665 mm

Condition: used, Year of construction: 2026, FM230-L1 low-noise vacuum extractor. Ncedoy S Uz Tepfx Am Uew Large design and powerful vacuum allows for removing sawdust and chips from machines and floors. Machine features Extractor with a powerful vacuum (horizontal system rotor) Metal, balanced rotor Strengthened motor Workplace vacuuming capability Large bags capacity Wide suction nozzle in the set Portable due to large wheels Ergonomic handle for machine manoeuvring Quiet work, high efficiency Due to its small size it doesn't take a lot of space in the workshop Many years of our team's effort resulted in creating a WhirlWind series multi-wing metal rotor, which, along with the rigid metal body, constitutes the heart of the extractor. Vacuum air-flow perfectly sucks out excess amount of sawdust produced during machining wood. Large design of the extractor is equipped with a solid frame providing stability and vibration-free operation. Entire construction is also strengthened with appropriately thick supports, which hold the cylinders along with the weight of the waste bags in proper position. Another advantage is the usage of an elastic and durable gasket, located in the integral part of the machine in order to improve the tightness of the entire system. By default, our extractors are equipped with burlap (filtering and waste) as well as additional, disposable, durable, plastic waste bags. Elastic metal bands ensure long-term reliable bags replacement. Usage of rotary wheels in bearings provides quick relocation of the machine. Technical data S1 continuous work motor power 0.75 kW Speed 2800 rpm Suction efficiency 1150 m3/h Bags capacity 90 L Number of bags 2 Extracting connector diameter 100 mm Height 1550 mm Width 420 mm Length 800 mm Voltage 230V Weight 27 kg PLEASE NOTE!!! Post-warranty machines, 11 available. Complete, 100% working order, no packaging. NO WARRANTY!

Condition: used, Year of construction: 2026, FM230-L1 low-noise vacuum extractor. Large design and powerful vacuum allows for removing sawdust and chips from machines and floors. Machine features Extractor with a powerful vacuum (horizontal system rotor) Metal, balanced rotor Strengthened motor Workplace vacuuming capability Large bags capacity Nodpfozhtryex Am Uscw Wide suction nozzle in the set Portable due to large wheels Ergonomic handle for machine manoeuvring Quiet work, high efficiency Due to its small size it doesn't take a lot of space in the workshop Many years of our team's effort resulted in creating a WhirlWind series multi-wing metal rotor, which, along with the rigid metal body, constitutes the heart of the extractor. Vacuum air-flow perfectly sucks out excess amount of sawdust produced during machining wood. Large design of the extractor is equipped with a solid frame providing stability and vibration-free operation. Entire construction is also strengthened with appropriately thick supports, which hold the cylinders along with the weight of the waste bags in proper position. Another advantage is the usage of an elastic and durable gasket, located in the integral part of the machine in order to improve the tightness of the entire system. By default, our extractors are equipped with burlap (filtering and waste) as well as additional, disposable, durable, plastic waste bags. Elastic metal bands ensure long-term reliable bags replacement. Usage of rotary wheels in bearings provides quick relocation of the machine. Technical data S1 continuous work motor power 0.75 kW Speed 2800 rpm Suction efficiency 1150 m3/h Bags capacity 90 L Number of bags 2 Extracting connector diameter 100 mm Height 1550 mm Width 420 mm Length 800 mm Voltage 230V Weight 27 kg PLEASE NOTE!!! These machines are returns, complete, 4 available. NO WARRANTY!

Condition: new, Year of construction: 2026, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - hydraulic Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Dimensions (LxWxH) - 1600×800×1400 mm Nodpfxei D D A Ss Am Uscw Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Brush for cleaning band Cooling system Bi-metal band saw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, A set of transport rollers consisting of a WL9 running platform and a WF9 transport chassis. The maximum lifting capacity of the set is 18 tons. Description Transport rollers make it easy and safe to transport heavy items. Thanks to the use of polyurethane tread rollers, the transported machine and floor are not damaged. Technical parameters WL9 ROLLERS SIZE 85x85 mm ROLLERS NUMBER 12 LOADING CAPACITY 9000 kg LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT Ø170 mm SUPORTING POINTS 1 SHAFT LENGHT 1080 mm TURNING ANGLE OF SHAFT ± 90o DIMENSIONS 840x583 mm WEIGHT Njdpfxjvxrxko Am Ujcw 59 kg Technical parameters WF9 ROLLERS SIZE 85x85 mm ROLLERS NUMBER 12 LOADING CAPACITY 9000 kg LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT 320x200 mm SUPPORTING POINTS 2 CONNECTOR LENGHT 1000 mm WIDTH OF SPACNG ROLLERS 840-1230 mm WEIGHT 34 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, A set of transport rollers consisting of a WL6 running platform and a WF6 transport chassis. The maximum lifting capacity of the set is 12 tons. Description Transport rollers make it easy and safe to transport heavy items. Thanks to the use of polyurethane tread rollers, the transported machine and floor are not damaged. Technical parameters WL6 ROLLERS SIZE 85x85 mm ROLLERS NUMBER 8 LOAD CAPACITY 6000 kg LIFTING HEIGHT 110 mm BEARING SURFACE OF ELEMENT Ø170 mm SUPPORTING POINTS 1 LENGTH OF SHAFT 1080 mm TURNING ANGLE OF SHAFT ± 90o DIMENSIONS 610x520 mm WEIGHT 41 kg Technical parameters WF6 ROLLERS SIZE 85x85 mm ROLLERS NUMBER 8 LOADING CAPACITY 6000 kg LIFTING HEIGHT 110 mm BEARING SURFACE ON ELEMENT 200x200 mm SUPPORTING POINTS 2 CONNECTOR LENGHT 1000 mm Nedpfx Amevxrwao Uocw WIDTH OF SPACING ROLLERS 640 - 1030 mm WEIGHT 30 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, A set of transport rollers consisting of a WL3 running platform and a WF3 transport chassis. The maximum lifting capacity of the set is 6 tons. Description Transport rollers allow safety and easy transport of heavy items. Thanks to the use the polyurethane tread rollers, the transported machine and floor are not damaged. Technical parameters WL3 size of rollers 85x85 mm number of rollers 4 loading weight 3000 kg loading height 110 mm bearing surface for the element Ø170 mm support points 1 lenght of shaft 950 mm turning angle of shaft ± 90o dimensions (L x W) 270x230 mm weight 12 kg Technical parameters WF3 size of rollers 85x85 mm Nedpfxovxrauj Am Uscw number of rollers 4 loading weight 3000 kg loading height 110 mm supporting surface for the elements 150x150 mm support points 2 connector lenght 1000 mm spacing width between rollers 300 - 1000 mm weight 15 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, A device designed for quick setting of knives on the planer shaft. It is equipped with an accurate scale and can be used for any diameter of the knife shaft without having to dismantle it from the planer. Manufacturer: Cormak Nedpsvzycijfx Am Uscw

Condition: new, Year of construction: 2026, CORMAK ZX 7055 VARIO Milling and Drilling Machine Main Advantages Rigid cast iron base and column – ensures stability when machining demanding workpieces, reduces vibration, and extends tool life. Variable spindle speed control in two ranges: 75–438 rpm (low range) and 438–2500 rpm (high range) – allows optimal parameter selection according to tool diameter and material type. Automatic spindle feed – provides consistent cutting performance and reduces the risk of drill breakage during deep-hole drilling. Tapping function – once the preset thread depth is reached, the spindle automatically switches to reverse rotation. Ground gears – ensure smooth and quiet gearbox operation with stable spindle torque. Dovetail guideways on all axes – provide precise table movement and reliable machine geometry. Swiveling head ±90° with height adjustment – facilitates chamfering, undercutting, and angular machining operations. Forward and reverse spindle rotation – enables safe tapping and tool withdrawal. Efficient cooling system – effectively dissipates heat during machining, prevents overheating of both the tool and workpiece, and improves machining accuracy and tool life. Standard Equipment Variable spindle speed control Electrically powered spindle head height adjustment Coolant system Technical Description Heavy-Duty Cast Iron Construction Ncodpjzd R Eiefx Am Usw The robust cast iron construction forms the foundation of the machine’s durability and precision. The ZX 7055V DRO milling and drilling machine maintains excellent stability even during the most demanding operations. The machine features continuously variable spindle speed adjustment in two ranges: Low range: 75–438 rpm High range: 438–2500 rpm Large Cross Table with Precision-Ground Surface Attention to detail is a key design feature. The large cross table with a precision-ground surface ensures excellent flatness, resulting in highly accurate machining. Dovetail Guideways Innovative dovetail guideways provide smooth and precise movement along all three axes, enabling outstanding machining results without compromise. Forward and Reverse Rotation Adapt the machine to your requirements. The ability to rotate the spindle in both directions provides additional flexibility during machining operations. Swiveling Head ±90° and Adjustable Head Height Handle a wide variety of machining tasks thanks to the ±90° swiveling head and adjustable head height. Achieve precise results under all working conditions. Optional Machine Base A machine stand/base is available as an optional accessory. Technical Specifications Parameter Value Maximum Drilling Capacity Cast Iron (HT200) 45 mm Steel 32 mm Maximum Face Milling Capacity 80 mm Maximum End Milling Capacity 28 mm Table Size 820 × 240 mm Table Travel (X/Y) 595 / 185 mm Maximum Tapping Capacity M24 Spindle Taper MT4 Spindle Speed Range Low Range 75–438 rpm High Range 438–2500 rpm Spindle Travel Manual 107 mm Automatic 100 mm Distance from Spindle to Column Surface 250 mm Maximum Distance from Spindle Nose to Table Surface 445 mm Motor Power S1/S6 1.5 / 1.8 kW Net Weight 350 kg Overall Dimensions (L × W × H) 1084 × 924 × 1550 mm Height with Base 2150 mm