Used Konkoly Broaching Machine for sale (65,213)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) Bdodpsw H Dgnjfx Afwjg - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches. Bdodpfx Asyif Nlefwog

Condition: ready for operation (used), Year of construction: 2012, A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Bdsdpjxwcvmofx Afwog

Year of construction: 1968, condition: used, functionality: fully functional, machine/vehicle number: 2276, Karl Klink HW 20 Reaming Machine For sale is a functional Karl Klink HW 20 reaming machine. This machine comes from the renowned Karl Klink tool machine factory and was used in industrial applications until recently. It is suitable for precise reaming operations in single-part and series production. Technical Data Manufacturer: Karl Klink Tool Machine Factory Model: HW 20 Machine Type: Reaming Machine Year of Manufacture: 1968 Weight: approx. 5,500 kg Connected Load: approx. 19 kVA Condition Fully functional Used Inspection possible by appointment Sale due to changes in equipment Delivery FCA location Bdjdpszvf Trefx Afweg Dismantling and transport by the buyer Overhead crane and forklift can be made available for loading upon agreement.

Condition: excellent (used), Type: U3E1000 Bjdpfx Afozvq Axewodg Machine no.: 17098 Year of manufacture: 1982 Data: Engine power: 3 kW Pull length: 1000 mm Dimensions, W x D x H approx.: 900 x 700 x 1600 mm Weight (estimated): 300 kg ... 3 clearing needles

Condition: used, Year of construction: 1986, pulling force - max. 6,3 t Bodpfx Afoy Ty Afswodg max. ram stroke 1000 mm max. workpiece diameter 400 mm groove width 6 mm total power requirement 2,9 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1x1x2,2 m

Condition: good (used), Year of construction: 1980, Info: The machine was installed in a pit! - Pulling force: max. 25,000 kg - Stroke height: max. 630 mm - Working speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total power requirement: 45 kW - Machine weight: 5,500 kg Transport and loading can be organised across Europe upon request and for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Machinery Purchase/Sale Bdedpezvfpmefx Afweg PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS & MORE. Are you looking for a high-quality yet affordable machine for your production? Or would you like to sell yours? For further information or contact options, you can reach us via the contact form.

Condition: used, TECHNICAL DETAILS - max. force : 63 [kN] - broaching stroke : 1000 [mm] - spindle stroke : 400 [mm] - 3 cutting feeds : 2,5 - 5 - 7,5 [m/min] - return speed : 24 [m/min] - broaching positions : 1 Bsdpfxsug U H Uj Afwsdg - hydraulic motor : 9 [kW] - capacity of hydraulic tank : 600 [l] - capacity of cooling tank : 150 [l] - main voltage : 400 [V] - total power : 10,5 [kW] - floor space : 3.700 x 3.000 [mm] - total height : 3.200 [mm] - weight : 3.500 [kg]

Condition: used, functionality: fully functional, Arthur Klink Snowplow Bjdpezfg A Tsfx Afwedg Accessories: - Various plow blades The machine is fully functional.

Condition: ready for operation (used), Vertical – Rausch Milling Machine Type RSIZ 6 / 1000 S Condition: Used Technical data: Working range: up to 1000 mm Cutting speed: 3 to 5 m/min Return speed: 10 m/min Internal milling: largest workpiece diameter 600 mm External milling: area of the clamping plate 600 x 340 mm Coolant system Traction force measuring device Central lubrication, automatic Spindle protection with coil spring spirals Chip conveyor Cycle counter Dimensions: 1.05 m x 0.9 m x 4.3 m Weight: 1200 kg Self-collection or shipping by freight forwarder. We will gladly assist you in organizing cost-effective shipping. You are welcome to visit us for an inspection. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Bodpfxedyp Rme Afwedg The machines and tools are sold as is. The assembly and electrical connection of the machine/device must be carried out or checked by a qualified specialist. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Brand and Model: URPE M200 Bdedjzq R Tgspfx Afweg

Year of construction: 1963, condition: used, machine/vehicle number: 18135, Broaching Machine – Horizontal Manufacturer: Forst Typ: RIW 100/2200 Force: 100 Tons Stroke: 2.200 mm It is possible to buy the Crane - see offer no Y941 Bdsdpfsbrcy Nex Afweg

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Motor: 7.4 /10kw Power supply: 380 Volt / 50 HZ Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Bdsdpfsup Uzfjx Afwsg Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power.

Condition: excellent (used), Year of construction: 2007, pulling force - max. 9 t max. ram stroke 2000 mm max. workpiece diameter 900 mm total power requirement 25 kW Bodpeycxlcjfx Afwodg weight of the machine ca. 4,2 t

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units - Oil-tight storage on the control cabinet Bedpfx Afov Rpnmjwedg - Electrical scanning of the clamping jaws (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). General The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.

Condition: good (used), functionality: fully functional, Year of construction: 1992, Vertical snowplow with 10 snowplow blades and numerous mounting points. Bsdpozv D Risfx Afwodg Drive system with a Stöber gearbox, providing infinitely variable speed control.

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Bdjdpfer A Hcbsx Afwog Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 60305, General / technical data: Manufacturer: Rausch Type: RS6 / 1000 Year of manufacture: 07/2000 Machine-No.: 60305 weight: approx. 750kg Tractive force: 60kN (80kN) clearing speed: 4m/min return speed: 8m/min max. stroke: 1000mm maximum tool length: 1200mm maximum workpiece diameter: Ø approx. 900mm table opening: Ø 90mm for standard broaching mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to floor without superstructure). type of power: 400 Volt / 50Hz - 6 / 7,5kW Accessories/ optional equipment: - electrical scanning of the clamping jaws (tool removal control to prevent against unintentional retraction of the drawbridge) - integrated coolant system with check valve and drain cock Bodpfjiqkb Rjx Afwedg - patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is under power in our warehouse and can be inspected.

Year of construction: 1965, condition: good (used), functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. Bdedpstuuvzofx Afweg The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Condition: used, Year of construction: 1999, vertical broaching machine vertical internal broaching machine Bdsdpfezv Ecasx Afwsg swald Forst GmbH & Co. KG RISH 6.3x1000x320 M Year of Manufacture 1999

Year of construction: 1992, condition: used, machine/vehicle number: 148, Broaching Machine – Vertical Hard Broaching Machine Manufacturer: Forst Typ: RISZ 6,3 x 1000 x 320 Bdodpfjdnk T Asx Afwjg Machine number: 148 Year of manufacturing: 1992 Force max.: 80 kN Stroke max.: 1.000 mm Weight: approx. 10 Tons (Machine+Control Cabinet+Hydraulic aggregate)

Year of construction: 1991, condition: ready for operation (used), y 018 Broaching Machine – Vertical Manufacturer: Hönnema Typ: HSR 9/1250 RST Bedshf A I Nepfx Afwodg Machine number: 166/HM 510275 Year of manufacturing: 1991 Force: 9 Tons Stroke: 1.250 mm Area required: approx. 230 x 120 cm With automatic feed External broaching possible with device

Condition: used, functionality: fully functional, Manufacturer: Arthur Klink Year of construction: ca.1960 Bdjder A Hdgspfx Afwog Type: horizontal broaching machine Model: RH 10-50 Machine. No.: 241 Weight: 3.700 KG General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design Clearing stroke: 1,500 mm Tractive force: 10,000 kg (100KN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece clamping surface: Ø 460mm Workpiece diameter: max. approx. 750mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: hydraulically infinitely variable from 5 m/min to 30 m/min Space requirement of the machine: (w x d x h) approx. 6500mm x 950 mm x 1,400 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 8kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter Accessories - 1 universal pulling head for flat shafts from 3mm to max. 25mm wide - Adapter sleeve for drawbridge from Ø 85mm to Ø 63mm Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is well suited for heavy profile broaching tools. The machine is used and is in very good condition for its age. The machine is in our warehouse and can be inspected under power. The machine is currently not technically and visually refurbished, but can be used immediately. Pulling heads for profile broaching are mostly available used on request depending on DIN standard, dimensions and stock. Direct contact details and further information can be found in the attached PDF document

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm Bdodpjxxb Rrofx Afwjg For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2004, - Traction force: max. 160 kN - Broaching stroke: max. 1000 mm - Workpiece feeder stroke: max. 630 mm - Table width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg Transport and loading can be organized throughout Europe at an additional cost, upon request. Prices plus VAT Inspection is possible by appointment. Please contact us, our team looks forward to assisting you. Machine purchase / sale Bjdpezvfpgsfx Afwodg PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality, yet affordable machine for your production? Or do you wish to sell yours? For further information or contact options, reach us via the contact form.