Used Layer Depalletizer for sale (726)

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. Infeed with blocking unit & turning device. The palletizer builds single rows of bundles which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26001X.30 Serial Number blocking unit: 152 Hnsdpfx Ashrigqehzjp Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With Slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26001X.40 Includes pallet conveying, reference-no: 26001X.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying mounted on floor Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Color: Blue Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26180X.30 Serial Number blocking unit: 136 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Left hand palletizer (palletizing to the left of the infeed) Hedpfjhrmlgox Ahzjnp With slip sheet dispenser Empty pallet dispenser (model): PT 80 Reference-# empty pallet dispenser (pallet terminal): 26180X.40 Serial number empty pallet dispenser (pallet terminal): 78 Includes pallet conveying, reference-no: 26180X.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is

Condition: used, Automatic machine for unloading bottles from bulk pallets onto slat conveyors. Manufacturer: KRONES Model: PALMASTER Year of manufacture: 1996 Used machine, still installed – as shown in the photos. Original technical documentation. Hnsdpoyrf Txofx Ahzep Also available for sale: a palletizer from KRONES.

Year of construction: 2000, condition: used, General Technical Description: The Macchi 3-Layers is a three-layer blown film co-extrusion line designed for the production of high-quality tubing and sheeting films. The line is capable of processing LLDPE, LDPE, mLLDPE, MDPE, and HDPE. Film production utilizes an upward bubble-up working principle. The machine is equipped with a 350 mm 3-layer die head and delivers an output capacity of up to 450 kg/hour. EXTRUSION GROUP: Extruders: 65 mm + 80 mm + 65 mm • Infrared heating zones • Hydraulic screen changers The Coexflex Size 3 extrusion group includes: – Two high-performance extruders 65/30D (layers A and C) – One high-performance extruder 80/30D (layer B) – Bimetallic barrels – Nitrided, high-mixing screws – Water-cooled grooved feed sections – AC motors with digital frequency converters (74 kW for 65 mm, 100 kW for 80 mm) DIE HEAD: • Model TE502 • 350 mm diameter, die gap 1.8 mm • IBC (Internal Bubble Cooling) • Electroless nickel-plated flow channels • 4+4 ceramic heating zones • Mounted on a die cart with integrated air distribution manifold COOLING SYSTEM: • Dual-lip Plast-Control air ring • Coexflex version includes Double Flux Cooling Ring ASR3, with inverter-driven blower and interchangeable inserts TAKE-OFF UNIT: • Take-off width: 1800 mm • Oscillating nips • Side gusseting capability WINDING SECTION: • Double automatic back-to-back winder • Fully automatic roll change • Maximum winding width: 1750 mm • Cardboard core diameter: 76 mm Hodpfxsyt Ikvs Ahzsnp FILM SPECIFICATIONS: Film widths achievable with 350–400 mm die: 1300–1700 mm Thickness range: 18–200 μm Output example (Coexflex specs): 1600 mm width, 100 μm LDPE → 400 kg/h LINE SPECIFICATIONS: • Total line height: 10 m • Mechanical winder speed: 7–110 m/min • Installed electrical power: 320 kW, 415 V, 3-phase + neutral • Cooling water consumption: 6 L/min • Compressed air requirement: 6 bar AUXILIARY EQUIPMENT: • Tower • E+L web guiding system • Piovan gravimetric weight control • Piovan Quantum dosing units • Plast-Control automatic thickness control • Calibrating basket • Corona treater (Ferrarini & Benelli) • FBF cold-needle micro-perforation • Air shafts (8 pcs) This translation uses precise, industry-standard terminology suitable for machinery and equipment descriptions on professional trading platforms.

Year of construction: 2007, condition: excellent (used), EXTRUDEX EXTRUDER EN50-30D year 2007 no. 4101264, with melt pump, screen changer and 5 layer pipe head Year of manufacture 2007 As well as 4 co-extruders EXTRUDEX EN25-25D, year of manufacture 2007 APPLICATION: Production of PE 5 layer pipes Max diameter 32 mm INVENTORY: 1 single-screw main extruder EN 50 4 co-extruders single-screw auxiliary extruders The extrusion system is my property Location: Hnodpovyaxuefx Ahzop D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Condition: ready for operation (used), Year of construction: 1992, A dismantled Autefa compensating stacker is available. Working width: 3000mm, working speed: 60m/min. On-site inspection is possible. Hnjdpfxowwvw Te Ahzjp

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Screws ø 90-36D, 45-30D, 45-36D Hnedpfxsyilyke Ahzop Compact design, one shared control cabinet, approx. 800 kg/h

Condition: as good as new (ex-display), Year of construction: 2025, Japa® 505 PRO: Top Performance and Versatility for the Highest Demands Advanced Splitting Technology with Perfect Split In addition to the proven Perfect Cut saw system, the PRO model features a unique Perfect Split splitting blade. When combined with the conventional splitting blade, it consistently ensures uniform and high-quality firewood production. Switching between splitting methods takes just a few minutes, highlighting the extraordinary versatility of this machine. State-of-the-Art Cleaning with Perfect Clean The Japa® 505 PRO is equipped with the innovative Perfect Clean cleaning system, which efficiently removes sawdust, wood chips, and bark from the finished product. This guarantees clean and tidy firewood, reducing the machine’s cleaning requirements and significantly optimizing workflow. Clean firewood dries faster, burns better, and achieves a higher resale value. Patented Hydraulic Chain Tensioner The patented hydraulic chain tensioner ensures smooth and safe sawing at all times. It extends the service life of both chain and saw blade and allows for tool-free chain replacement in seconds. Additionally, a hydraulic feed roller at the start of the infeed conveyor makes transporting large logs easier—providing improved ergonomics, safety, and production efficiency. Technical Data: Log diameter: 500 mm Splitting force: 16 t Splitting wedge: 6-way Log length: up to 50 cm Oil capacity: 100 l PTO speed: 500 rpm Motor output S1: 15 kW / 400 V Gear oil: 80W 90 Conveyor belt length: 4400 mm Weight: 2330 kg Original photos & honest descriptions. Shipping by arrangement. Fair prices. ❓If you have any questions, just contact us – we reply quickly and courteously! Hnjdpfoxx T Aajx Ahzop

Condition: good (used), Year of construction: 1999, 1) layer infeed systen (2 lines with 3 hoppers (300, 400, 500 mm) each incl. 2 2 x gluing units + 2 cut off saws 2) vacuum stacking unit + infeed transport belt for press 3) press unit 4) vacuum de- stacking unit + outfeed transport belt Hnjdpfx Ahohmk Umszop 5) all control systems for complete line capacity: 10 strokes / min or approx 2400 layers/ 4 hrs Product: 3 layer lamella surface with max dimension 2208 x 186 x 4 mm

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Hjdpjzkru Eefx Ahzenp Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide, E&L Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HY-43, screw diameter: 110 mm, total width: 2,500 mm, total length: 8,500 mm, total height: 9,500 mm, power: 350 kW (475.87 HP), Equipment: documentation/manual, The two-layer blow molding machine is a new generation of plastic extrusion blow molding equipment. It is mainly used for molding kayaks, canoes, surfboards, and other large hollow plastic products. The machine uses a motor designed to deliver high torque and sufficient power for material cutting. The molten plastic is extruded into a storage die head. When the material reaches the preset volume, the wall-thickness control system continuously adjusts the opening ratio. The extruded material is formed into a parison, which is then molded into the final product. Hnsdpfx Aex R R Igshzop

Condition: used, Year of construction: 2012, operating hours: 2,815 h, functionality: fully functional, machine/vehicle number: 12SLT146060, overall weight: 21,000 kg, Equipment: steel tracks, Tracked diesel 2 shaft shredder in perfect working condition. Hedpfx Ahjya Hmiszonp Dimensions: Weight: 20 Tonne (22UST) Transport Width: 2.5m (8'3") Transport Length: 10.2m (33'6") Transport Height: 3.1m (10'5") Working Width: 2.5m (8'3") Working Length: 10.2m (33'6") Working Height: 4.2m (13'10") Applications All types of wood (railway sleepers, pallets) All plastics (including wind turbine blades) Commercial and industrial waste Construction & Demolition (C&D) Domestic and household waste Green waste (including grass, trees, stumps) Mattresses Paper and cardboard (including paper rolls) White household goods

Condition: used, System for depalletising empty beverage crates and palletising full beverage crates. The system consists of the following components: - Depalletiser (Matek/Packtech, 2001), robotic gripper arm with clamping grippers. Upgrades were carried out in 2017. - Palletiser (Matek/Packtech, 2001), robotic gripper arm with clamping grippers. - Pallet pressure control (Matek/Packtech, 2001) - 2 pallet magazines for good and defective pallets - Pallet labelling (2005) for applying ‘EAN 128’ labels - Pallet strapping (Strapex, 2005) - Pallet conveyors with loading and unloading stations Additional title: Complete palletising and depalletising system for beverage crates; manufactured Hedpfxezizwao Ahzonp Capacity: 44000 bo/h Formats: 0.5 L NRW bottles in 20-bottle and 9-bottle crates Features: Depalletising robot; Palletising robot; Pallet inspection; 2 x pallet magazines; Pallet labelling; Pallet securing; Pallet transport; Pallet receiving and dispatch

Condition: used, Year of construction: 2004, Manufacturer: PRB Packaging Model: Destratus Year: 2004   Automated system for removing packs of bottles or cartons from a pallet. The equipment continuously feeds empty bottles to the rest of the line. Light curtain. Hodpfx Ahezg I Umszonp UniOP control panel. History, documentation, and electrical diagrams available.

Condition: used, Length 3500 mm Stainless steel structure Complete with   - Side guides   - Support feet   - N° 2 adjustable speed motors   - Chains width 82.6 mm   - Motorized device with idle rolls for round bottle sliding Hedpfxex Iv Tps Ahzjnp

Condition: used, functionality: fully functional, Vacuum depalletizer for different formats automatic cycle by cycle. Features: - Lifting system with double central columns with guides. Hedpfx Ajwny Scshzenp - Synchronized movements. - Pushing by means of rodless cylinders. - Automated pallet infeed and outfeed.

Year of construction: 2020, operating hours: 10 h, condition: like new (used), functionality: fully functional, Automatic line for rinsing, filling, pasteurizing, drying and packaging of glass juice bottles consisting of following modules: 1. SEMI AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unpacking glass bottles from pallets, 1 operator required to put the pallet into the machine and remove the cardboard that is inserted in between the glass bottle layers Hedpfxjzdr Ilo Ahzsnp 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of the bottles before filling 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling of the hot product into the glass cylinder shape bottles 4. CLOSING MACHINE FOR TWIST OFF CAPS (model: IND-Close 12E) for vacuum closing of the filled bottles using steam injection induced vacuum system 5. PASTEURIZATION AND COOLING TUNEL (model: PT 42-9) for further continuous pasteurization of the product 6. VACUUM TESTING MACHINE (model: IND-Test 61) for selection and eviction of the improperly closed bottles 7. DRYING MACHINE (model: IND-Blow 86) for drying the residual moisture on the battle surface before applying labels 8. LINEAR LABELLING MACHINE FOR APPLICATION OF SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over the cap) and side application of the labels on cylindrical bottles 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing the bottles onto cardboard trays in various configurations per different bottle sizes 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) connecting the various modules of the line (conveyors between rinsing, filling and closing sections with top covers)

Condition: used, machine/vehicle number: LC534, Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Description of Main Machines Depalletizer TMG VEGA 60 (2008) In this Used filling line for sparkling wine the depalletizer automatically removes bottles from pallets using its integrated PLC and electronic protection barriers. Furthermore, its system includes a layer pad magazine and an automatic mechanism for removing pads and caps within the same cycle, ensuring efficiency. Rinsing Machine AVE RAI 12 (1999) The rinsing machine cleans the inside of bottles using its PLC system. It effectively removes particles and potential contaminants. As a result, the bottles are properly prepared for filling, which contributes to higher product quality. Ozone Dispenser The ozone dispenser sanitizes bottles before filling by producing ozone gas, a strong oxidizing agent. Not only does the gas eliminate bacteria, yeast, and microorganisms, but it also leaves no chemical residues, thereby guaranteeing high hygiene standards. Isobaric Filling Machine Cobert SUPREMA (1985) The isobaric filling machine fills bottles using 24 filling valves while controlling internal pressure. Consequently, it processes both still and sparkling wines, preserving their stability and quality. Hnodpovxz Alsfx Ahzep Capping Machine AROL (1997) The single-head capping machine applies flush and mushroom corks. As a result, it ensures airtight sealing, which preserves the wine’s flavors and properties over time. Capping Machine KOMPASS (2007) The capping machine applies screw caps (BVS, Stelvin) to bottles with precision. Furthermore, its design accommodates multiple formats and guarantees secure closures for different types of wines. Wirehooder ROBINO & GALANDRINO REKORD 10/2 (1994) The wirehooder automatically applies wire cages using its 10 plates and long-duration magazine. Because the machine loads cages from ground level, it allows uninterrupted operations without delays. Bottle Heating Tunnel COMTEC (2017) The heating tunnel stabilizes the temperature of bottles after filling by spraying them with warm water. Consequently, it helps reduce thermal shock and prevents potential damage to the bottles. Drying Tunnel CAMES TNN1 (2001) The drying tunnel blows high-efficiency air over the bottles, thoroughly drying them before they move to the next production step. Thus, this step ensures that the bottles are ready for labeling and packaging. Capsule Distribution and Application Capsule Distributor NORTAN (1997) The distributor feeds capsules continuously to the capsuling machine, thereby minimizing dow...

Condition: used, Year of construction: 2004, The repackaging system is used to unpack glass bottles from pallets containing full module boxes, repackage them into ‘open basket’ carrier boxes holding four bottles, and repack them into pin-partition crates with palettising. The system consists of the following individual machines: 1. Depalletising of full module crates / repalletising of empty module crates: Here, pallets containing full module crates are fed in and destacked, whilst empty crates are stacked and transported out. 2. Repackaging machine: Here, 20-unit module boxes are unpacked, 4-unit carrier cartons are unfolded and filled with bottles/packed. 3. Packing into pin-partition crates and palletising: Here, the 4-unit carrier cartons are packed into pin-partition crates, stacked onto pallets, and transported out of the system. Additional title: Repackaging of full pallets containing modular crates into pallets containing pi Capacity approx.: 200 crates/h Formats: Bottle crate (400 x 300 mm) on Euro pallet (1200 x 800 mm) Running direction: right -> left Operation / Control: on-site control unit / Siemens PLC Position: free standing Base construction: Square tube construction bolted to the floor Hnedpfx Ahey Nm Hvjzep Features: depalletizing, unpacking, bottle transport, crate transport, carton unfolding, packer for the bottles in the cartons, packer for the cartons in the quill boxes, palletizing of the full crates, pallet infeed and outfeed, protective grilles, switch cabinets, control device Layer patterns: 2x2 bottles/carton, 2x4 crate, 5 layers / palet

Condition: used, machine/vehicle number: LC608, Used Glass bottling line for ciders 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is configured for crown‑capped beverage production and industrial packaging. It combines inspection, rinsing, filling, labeling, packaging, and end-of-line palletizing into a robust second hand solution for beverage production.Depalletizer: Kettner Pressant Universal (1N), 5 layers/minEmpty Bottle Inspector (EBI): Krones Linatronic 731 M2, 700 bottles/minRinsing Machine: CBI JetMatic, 72 heads, 670 bottles/minFilling/Crowning Monoblock: O & H Hansa Ref C2932B 03, 600–660 bottles/min, 80/14 headsBottle Inspector 1: Heuft Spectrum TXBottle Warmer: CBI MCC 2000Labeling Machine: Krones (Renner) Topmatic Type 071, 850 bottles/minBottle Inspector 2: Heuft Spectrum TXShrink Wrapper (Over‑wrapper): SMI SK 800F, 160 packs/minWrap Around Packer: SMI WP 450, 45 cases/minCase Divider: CBIPalletizer: Berchi Dinamatic PTF/2Pallet Wrapper: Robopac Helix HS 30, 30 pallets/hourPallet Coder: Logopak LOGOConveyors + Controls: CBI bottle conveyors and controls; CBI case conveyors; CBI pallet conveyorsCase Scales: John White & Son Cartomat 2Carton Coder: Videojet Excel 100Bottle Dryers/Blowers: Jetair Jet‑2; Sonic 150Chillers: Geoclima 2 x TMA 2A450A EC‑34Container type: Designed for Glass bottle handlingLine speed (bottling): up to 850 bottles/min (limited by downstream configuration)Advanced Automation & Control SystemsThe line integrates centralized controls across depalletizing, inspection, rinsing, filling, labeling, and packaging. Automation-ready subsystems support stable speeds from 160 packs/min on the shrink wrapper to 850 bottles/min on labeling, with efficient changeovers between operations. Safety interlocks, emergency stops, and guarding around rotating and motion systems enhance operator protection and reliable beverage production.Coordinated conveyor logic and accumulation for smooth product flowAutomated inspection (EBI and post‑label checks) for quality assuranceControlled thermal management via bottle warmer for condensation mitigationPallet coding and carton coding integrated for end‑of‑line traceabilityProduction Line Integration CapabilitiesThis used bottling line is engineered for inline operation from depalletizer through pallet wrapper, with modular stations for easy reconfiguration. The conveyor and control system by CBI provides balanced buffering between processes to maintain bottle integrity and consistent throughput. Suitable for a range of crown‑capped glass bottle applications in industrial packaging and beverage production.In... Hnodpfx Ahjy Ef Ttozop

Condition: used, Line 4 Can Filling LIne 130 cans/min capacity 900g can weight 127mm can diameter comprising: Cap UV system with 3 Rittal Heraeus P6062.30S UV lamp units Cap inverter UV tunnel and conveyors Motorised Scoop Hopper with swan-neck conveyor Fully automated scoop sorting line with 2 Aylesbury Automation Euro 630 bowl feeders Isoma empty can rinser/ inverter S/N P160/CRL4. YOM 2016 Jorgensen fully automated depalletizing system Accusort AL5010 4 head Barcode reader with associated conveyor and controls Heraues H4087 Twin Lamp empty can UV tunnel Del Packaging BLE-35 motorised incline conveyor Del Packaging RF-6200 rotary capper feeder with integral UV tunnel Amberflex Spiralveyor SV spiral conveyor (2015) Thermo Scientific Ramsey Versaweigh checkweigher (2018) Domino case labeller with stand Oryx Automation CMWAP50 fully automated case packing machine Mettler Toledo Garvens XS3 automatic checkweigher with reject system and table Accusort AL5010 4 head barcode reader (2007) Del Packaging IPCN401-502 capper with cap detection (1993) Sleever International fully automated sleever Domino D620i twin head laser coding machine CSW Mini Multifeeder wide/54-MMFwide -01 can end feed system (2011) Heraues H4087 twin lamp full can UV tunnel Jorgensen 94302A outfeed can cleaner (2003) Dylog DYXIM D pass through X Ray machine (2015) Del Packaging CLPS scoop docking and over capping machine with scoop in cap detector system Shibuya Hoppmann scoop dropper feed and place system Shibuya Hoppmann Scoop dropper feed and place system with hopper JBT International 16 head rotary filler with 2 Mettler Toledo C Series checkweighers Isoma De-Eevator 01 can De-Elavator (2020) Hjdpfezl T Sbjx Ahzjnp Heraues H4087 4 lamp top and bottom side UV tunnel Terlet 4 chamber vacuum and gassing system (1993) Please note : the following machines have been removed Angelus 56P can seamer (2007) Angelus can seamer Line 4 complete comprising items EU575759 to EU575790 Please note, this lot 30466-348 is offered for sale as a complete line. Its components are simultaneously offered as individual lots 30466-349 to 30466-374 Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The water is pressed through the RO membrane by means of a high-pressure pump. The desalinated water/permeate is then led to consumption via a 1000 litre reservoir. Hnsdpfx Ajzl E Diohzjp The water containing the concentrated salts/concentrate is led to outlet. The relation between permeate/concentrate shall be adjusted manually on the needle valve. Under normal operating conditions the RO membranes have a long lifetime. But even with a good raw-water quality, layers of impurities will, to a certain extent, occur and there will be a slow reduction of the permeate capacity.

Condition: good (used), machine/vehicle number: S/N 40240 003151, 1 X Loma IQ metal detector system. This machine runs left to right with a modular belt and pneumatic pusher reject into a lockable bin. Technical Specification ⚙️ ✅Serial number - 40240 003151 ✅ Manufacturer - Loma Systems ✅ Year of manufacture - 1998 ✅ Aperture dimensions - 350mm wide x 175mm high (140mm clearance). ✅ Belt dimensions - 2100mm long x 300mm wide (modular belt). ✅ Power - 380V | Phase 3 | 50Hz ✅ Runs left to right. General machine overview 🗒️ Robust and reliable engineering has made Loma a trusted name in quality control. This machine represents a proven and cost-effective solution for businesses needing a dependable layer of metal contamination detection. Key features and benefits 🧰 ❇️ Reliable Performance Built in an era where durability was paramount, this IQ model offers consistent and straightforward metal detection, ensuring product safety and brand protection through a well-established, classic technology. ❇️ Cost-Effective Solution A machine of this vintage provides an excellent opportunity to acquire an industrial-grade metal detection system at a fraction of the cost of a new unit. ❇️ Simple Operation Its control system is typically simple and mechanical, making it easy to operate and maintain without the need for complex programming. Hodpfxewk Nq Hs Ahzonp ❇️ Robust Construction The machine's durable build quality is designed to withstand the rigors of continuous use in various production environments.

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck, length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * Suitable for 6 x 4 or 8 x 4 tandem axle vehicles Compact front axle: * Hook receiver at the front and rear, length: approx. 2,200 mm * Axle width: approx. 2,850 mm Excavator bridge: * Telescopic excavator bridge with traversable bridge hooks at the front and pin-and-plate coupling at the rear * Overall width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear axle: * Mechanical pin-and-plate coupling for mounting a low-bed trailer at the front * End crossbeam at the rear, axle width: approx. 2,850 mm * Axle length: approx. 5,480 mm Swivel axles, all axles hydro-mechanically force-locked * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle suspension Hsdsxbmplopfx Ahzsnp Tires: * Front axle: * 8 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Rear axle tires: * 16 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Load index 150/148J Painting: * Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, according to the RAL 841GL system. Including the following accessories: * Steel front panel, approx. 400 mm high * Aluminum side and rear walls, pluggable on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 liters. * With MAX Trailer coupling parts; otherwise, coupling parts must be supplied by the customer. * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit, type No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication for a 2-axle axle with standard grease NLGI-2 * One 7-pole socket on the left and right at the rear of the front axle for warning signs * Screw-in option (approx. 40 mm diameter) every approx. 500 mm on the outside of the top chord of the outer beam of the excavator bridge for screw rings (LC 16,000 daN) * Foldable wideners with steel mats, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle axle with standard grease NLGI-2 * On the rear axle, a socket for the cable remote control of the trailing axle * Rear axle with tipper body * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine

Condition: used, Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 X-ray fluorescence coating thickness measuring device Manufacturer: Helmut Fischer GmbH + Co. KG, Germany Type: XDL-XYZpT8 Model: FISCHERSCOPE X-RAY Machine type: X-ray fluorescence measuring device / coating thickness measuring device (XRF / RFA) For sale is a used X-ray fluorescence measuring device from the manufacturer Helmut Fischer GmbH + Co. KG. The FISCHERSCOPE X-RAY is suitable for non-destructive coating thickness measurement and material analysis using X-ray fluorescence (XRF/RFA). The system is designed for measuring functional layers, corrosion protection layers, and various metallic coatings and is used in quality assurance, electroplating, surface technology, research, and laboratories. The device comes from a warehouse liquidation and is explicitly sold untested and without warranty. Technical data: Manufacturer: Helmut Fischer GmbH + Co. KG Model: FISCHERSCOPE X-RAY Type: XDL-XYZpT8 Serial number: SN010002436 Made in Germany CE marking present Measuring system: X-ray fluorescence (XRF / RFA) Measuring chamber with C-slit Standard X-ray tube Proportional counter Fixed aperture and fixed filter DCM stroke: 0–80 mm Supply voltage: 230 V AC Frequency: 50–60 Hz Power consumption: 120 W Equipment: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Measuring chamber with protective cover Software Operating manual Power connection Serial interface (Sub-D) Other accessories as shown in the pictures Application areas: Coating thickness measurement Material analysis X-ray fluorescence analysis (XRF) Quality assurance Electroplating Surface technology Hnodjzl Ulvspfx Ahzep Materials testing Laboratory Research and development Condition: Used. The device comes from a warehouse liquidation. Optical condition as shown in the pictures. The device has not been tested by us and is explicitly sold untested and without warranty. Scope of delivery: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Software Operating manual Other accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.