Used Nicholson Debarker for sale (99)

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Double rotor round log debarker with infeed VK-600, rotor opening 620 cm warranty time 6 month from delivery, delivery time 8-10 weeks from order. Two debarking rotors, speed up to 120 m/min. Currently machine is under renovation Nsdpfx Adspbbmlsrold

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Nedotk N Dkepfx Adreld

Year of construction: 2004, condition: used, functionality: fully functional, Price including with dismantling. Excellent condition. Included in the set infeed centering system with Cambio 66 Nlsdpfoyyz Eusx Adrjd and outfeed.

Condition: used, Bark remover Cambio 500 in good condition Nljdpfx Adswi Iz Ierjd

Condition: like new (used), functionality: fully functional, Completely restored guidework for debarker, as good as new Nsdpeq Dp Erofx Adrjld

Condition: used, We offer this used Cambio 66 shredder. Shredder: Manufacturer: HAGBY BIL & SMIDE AB Type: RWP-14 EU Serial number: 529 Njdpfxjy Stw Ts Adreld Year of manufacture: 2017 If you have any questions or require further information, please send a message or contact us by phone.

Condition: reconditioned (used), Debarker for logs from 130 to 700 mm in diameter. Nodpfjwfz Iyex Adrsld

Condition: good (used), log diameter 100-660mm transverse and longitudinal feeder included Nlodpfx Adev Ap Sijred

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Rotor motor: 75 kW Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Year of manufacture is estimated to be the late 1990s. Nodpjw Emhfefx Adrsld Videos of the machine can be sent.

Condition: refurbished (used), Year of construction: 2001, Balz Debarking Machine BG 90 6W-GR Year of manufacture: 2001 Completely overhauled in 2022 and not reassembled afterwards Minimum diameter: 14 cm Maximum diameter: 90 cm With conveyor systems for infeed and outfeed Immediately available – Fully overhauled Nlodjy Iabdepfx Adrjd Location: Austria, near Linz

Condition: refurbished (used), Debarking machine Valon Kone VK - 450 2RE Debarker with infeed conveyor, for log size either up to 450 mm, reducer rotor and debarking rotor. Nledpfxoxhdtze Adrjd The debarking rotor bearing is new.. The machine has been overhauled. 6-month warranty

Condition: good (used), Year of construction: 2008, functionality: fully functional, Production line manufactured by a Canadian company Brunette, which can be described as very powerful and durable. Njdjvu D Dwjpfx Adrsld The offer includes a log debarker with feeding tables, bark collection conveyors, as well as a chipper with 630kW installed capacity and a double screw unloading conveyor.

Condition: refurbished (used), functionality: fully functional, The VK820 two-rotor machine is equipped with 620 mm rotors and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished in our workshop and is in excellent working condition. Nlsdpfox Dip Hjx Adrsd Alternatively, depending on the client’s needs, the rotors can be replaced with 480 mm rotors.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Cambio 500 debarking line consisting of: Infeed centering. Nlsdpfswxdimex Adred Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Outfeed control unit. Tilting trough for long timber. Spare parts.

Condition: used, Cambio Debarker 54. If you are interested in purchasing, we are open to discussing the price. Nsdpfeww A E Rox Adrjld

Condition: new, Year of construction: 2026, - Dimensions 600 x 3,000 mm - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm Nedpfx Adeu Rpibsrsld - Machine for 6 - 35 cm logs - 18.5 KW drive motor for the rotor - 4 pre-cutters - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Condition: reconditioned (used), B., VK26M (model series 1974) with motorized discharge table: - Main machine - Infeed table (driven) - Discharge table - Control cabinet Including infeed and discharge table, workshop inspected * - Debarking capacity: 10 cm - 61 cm diameter - 4 main separators - 4 cutting knives - Rotor speed = 235 RPM - Rotor opening = 65 cm - 30 kW motor, speed 1500/min - Speed: 17-42 m/min - 3 m or longer (wood length) Njdpfx Aefn Iu Isdrsld Dimensions (without infeed and discharge table) L = 9840 mm Infeed table: 3540 mm x 1000 mm x 1900 mm Main machine VK26M: 2530 mm x 2200 mm x 2350 mm Discharge table (motorized table): 3170 mm x 1000 mm x 1300 mm RENOVATION: Pos 1: 1 unit: Machine disassembly, washing, sandblasting, priming, and painting, repair, assembly Pos 2: 1 unit: Material - knife axle bearings on the rotor, new bearings and seals (if required) Pos 3: 5 units: Miscellaneous material: V-belt for rotor drive Pos 4: 1 unit: Gear oil Pos 5: 1 unit: Material: Abrasives + paints Pos 6: 4 units: Valonkone peeling knives Pos 7: 4 units: Valonkone pre-separators Pos 8: 1 unit: Control cabinet: with 3-phase delta start for 30 kW main motor with 3-phase delta start for 11 kW geared motor with start for 4 kW geared motor input with start for 4 kW geared motor output Main starter Emergency STOP

Condition: ready for operation (used), Debarking drum in 3 sections with electrical motors for operate the debarker. Nodpfx Adjw N Rxbsrsld Total length 45 meter Drum diameter 3.8 meter Each drum section 15 meter in length Water bearing system with pump system. Possibility to offer extra debarking sections if more are needed.

Condition: new, Year of construction: 2025, Haewa / SWT Maschinbau Carriage made from a heavy, welded steel structure 4 pairs of main drive wheels 1 split, toothed pair of main drive wheels Main drive with 2 speeds Nlodpfxjcrp Ake Adred Hydraulics for ejector Milling arm made from a heavy steel structure Milling head: working width 300mm, guide strips, milling knives, and feed ring Milling head fitted with carbide inserts Hydraulic lowering of the milling head Carriage drive with frequency control, v = 0 – 60 m/min Type H 249 / 800 Main drive wheels 800mm Log diameter 0.2m – 1.0m Log length 2.0m – 6.0m (also longer) Total connected load 35kW With control panel

Condition: used, Söderhamns Rotary Debarker Cambio 85 - 66 - A Diameter: 10 - 66 cm Main motor: 30 kW Nlsdpfxextc Afj Adrsd

Condition: used, Year of construction: 1993, Häwa debarking milling machine H249 / 1000 Year of manufacture: 1993 Log diameter: 0.25 m - 1.2 m Log length: 1.8 m - 7 m Milling head: 30 kW Root reducer: 37 kW Consists of: - Cross infeed conveyor - Debarking - Conveyor belts Nsdpfxex Rv T Io Adreld - Outfeed conveyor

Condition: like new (used), Year of construction: 2018, HÄWA Debarking Machine - Type H256 / 800 - Manufactured from a heavy-duty welded steel structure - 4 pairs of log feed rollers - 1 split, toothed pair of log feed rollers - Log feed roller speed controlled by a frequency inverter - Milling arm manufactured from a heavy-duty steel structure - Milling head: working width 300 mm, impact bars, impact knives, and run-in ring - Milling head fitted with hard metal - Hydraulic lowering of the milling head - Milling head feed controlled by a frequency inverter - Log feed rollers 800 mm - Log diameter 0.2 m – 1.0 m - Log length 1.0 m – 6.0 m - Total connected load 35 kW - With HBC radio remote control - Available immediately - Year of manufacture 2018 Nsdpfedwidwjx Adrold

Condition: as good as new (ex-display), Year of construction: 2025, HÄWA / SWT Maschinenbau Debarking Machine – New -- ---Demonstration unit --- Immediately available - Made in Germany - Model H256 / 800 - Manufactured from a heavy welded steel construction - 4 pairs of main log drive wheels - 1 split, toothed pair of main log drive wheels - Frequency-controlled log drive - Milling arm made from a heavy steel construction - Milling head: working width 300mm, impact bars, impact knives, and guide ring - Milling head equipped with carbide inserts - Hydraulic lowering of the milling head - Frequency-controlled feed for milling head - Log drive wheels 800mm - Log diameter 0.2m – 1.0m - Log length 1.0m – 6.0m - Total connected load 35kW Nlsdpfxoxx Am Uj Adrsd - With HBC radio remote control

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters Nsdpfx Adeu Hmacorsld 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Machine workshop checked Machine cleaned and repainted

Year of construction: 2024, condition: new, - debarker with 3/3 feed rollers - infeed and centering table - min log diameter 100 mm - max log diameter 600 mm - min log length 2.000 mm Nedpsfvbphsfx Adreld - 30 m/min feed speed - 5 pcs. changeable carbide knives - 37 KW Main Motor - 9,2 KW Gearbox inffed and centering table - 5,5 + 7,5 KW Gearbox feed rollers - 9.000 Kg weight