Used Wmw Upw 25 for sale (15,895)

Condition: used, Technical details: floor-plate length: 255 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) Fedpfx Acju N D Icecjgc *

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m Fgsdpfx Acjxna Uzococ

Condition: used, Technical details: diameter: 250 mm passage: Ø 80,0 mm width: 80 mm weight of the machine approx.: 18,0 kg dimensions: Ø 250 x B: 112 mm three jaw chuck made of steel Fgsdpfx Acsu Nla Hjcoc flange intake Ø 210mm with 3 pcs drill hole M12x44 incl. 3 set of 3 jaws *

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm Fgodpou Ng Npjfx Accjc surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U Fsdevbhv Rjpfx Accogc range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *

Condition: used, Technical details: floor-plate length: 800 mm Fgjdpfx Aou N Dhijccjc plate width: 455 mm plate height: 75 mm weight of the machine ca.: 264 kg transport dimensions LxWxH: 800 x 455 x 250 mm ram plate of a PYE 160S press Use: e.g. for reducing the installation height of the press or shortening the working distance (forward run) - with centre bore Ø 40mm continuous - with 6x part circular drilling Ø 16mm, pitch circle Ø 160mm - clamping slot diagonal according to DIN 650 ( a=19mm; h= 25mm; b= 38mm; c= 16mm - below with support plate = distance approx. 410mm *

Condition: used, Technical details: weight of the machine approx.: 160 kg dimension machine xH: 0,58 x 0,50 x 0,3 m swivable: nein ° rotation movement: 360 Grad Fgsdpfx Aceu N E Dxscec Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck *

Condition: used, Technical details: Fgsdpfx Asvgbhkjccsc diameter: 250 mm passage: 80 mm width: 80 mm revolution per minute: 2400 U/min dimensions: Ø 250 x B: 180 mm incl. 3 clamping jaws mounted, max. clamping range outside: Ø 60 - 188 mm and max. clamping range inside: Ø 17 - 192 mm with base plate Ø 303 x 48 mm; outer pitch circle Ø 280 mm with 4x M16 holes; inner pitch circle Ø 134 mm with 4x M12 holes; T-slot 3x lengthwise and 3x crosswise, T-slot spacing = 64 mm Flange = Ø 248 x 13 mm Accessories: with chuck key 1 set of soft jaws *

Condition: used, Technical details: center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 Fgsdpfx Acsv U T Dyscoc spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Condition: used, Year of construction: 1999, Technical details: floor-plate length: 5500 mm plate width: 1500 mm plate height: 250 mm weight of the machine ca.: 6,5 t space requirements of the machine approx.: 5,5x1,5 m - distance of T-slots = 542 / 500mm in a parallel offset order - T-slot according DIN 650 - a=28,0mm; h=48,0mm; b=48,0mm; c=22,0mm Fgsdpfsu N Dnvox Accjc - incl. adjustment screws and covering caps i.D. *

Condition: used, Technical details: width: 250 mm depth: 180 mm height: 250 mm weight of the machine ca.: 30,0 kg Fedpfxsu N Eb De Accogc 2 pieces clamping angle available (No. 1104021 A is slightly thinner) *

Condition: used, Technical details: diameter: 250 mm passage: 80 mm width: 80 mm weight of the machine approx.: 23 kg dimension L-W-H: Ø 250 x 130 mm 4 jaw chuck with flange - width of the main body 80mm - with clamping jaws for internal /external - flange size Ø 250 x 18 mm, thread 4 x M16 ; pitch circle of the bolts = Ø 170 mm Other 3- and 4-jaw chucks and face plates in stock. Please inquire! Fsdpfx Aou Nlfioccegc *

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm center height over bed: 260 mm hobbing length: 2000 mm Fgedpfx Asv U Un Hsccsc module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: used, Technical details: intake diameter: 310 mm weight: 216 kg dimensions L x W x H: 0,5x0,2x0,9 m conrods for mechanic press PEE 250 trapezoid thread dia. 146x14mm Fodou Nurxspfx Accegc *

Condition: used, Technical details: Fgsdpju S H Arofx Accjc width: 1250 mm depth: 970 mm height: 1600 mm weight: 2,0 t 1 piece to DIN 650: T-slot width a= 36; h= 62; b= 62; c= 27 mm, T-slot spacing 200 mm *

Condition: used, Year of construction: 1980, Technical details: x-travel: 820 mm y-travel: 300 mm z-travel: 485 mm spindle taper ISO: SK 40 spindle head swivable left - right: 0 - 45° rechts/links ° quill travel: 80 mm range of revolution per miute: 56 - 355 und 450 - 2800 U/min feed:: X/Y: 10 - 80 und 80 - 630 mm/min rapid traverse : X/Y: 3150mm mm/min Fsdpfx Acjwtct Tscjgc Table dimensions: 1700 x 400 mm table surface area: 1120 x 205 mm total power requirement: 7,5 kW kW machine weight approx.: 2120 kg dimension machine xH: 1,7 x 1,7 x 2.5 m additional features: -Table adjustment via machine see X/Y and Z data -table adjustment by hand X/Y/Z: 850/330/505mm milling arbor reception max. Ø 40mm operation via control panel incl. 4 pieces foot plates *

Condition: excellent (used), functionality: fully functional, Description Fodpfjy Rgl Uox Accsgc WMW ZFWVG 250 x 800 Thread Milling Machine Thread Milling Specification: Workpiece diameter over: - Bed: 500 mm - Saddle: 250 mm Milling length: 800 mm Max. module: 7 Centre height over bed: 260 mm Workpiece spindle bore: 102 mm Workpiece turning speeds: 0.0034 – 2.65 rpm Feed rolls: 0.027 – 5.66 mm/rev Longitudinal feeds, infinitely variable: 0.3 – 198 mm/min Main drive: 4.0 kW Electrical voltage/frequency: 380 / 50 V/Hz Total power requirement: 9.5 kW Dimensions: 3000x2500x1600 mm Total weight: 3300 kg

Condition: excellent (used), Horizontal Gear Hobbing Machine Manufacturer: WMW HECKERT Model: ZFWVG 250x2000 Fodpfjyr S Upjx Accsgc VEB Fritz Heckert ZFWVG 250×2000 Max. workpiece length: 2,000 mm Max. workpiece diameter: 250 mm Accessories: second milling head, hobs for various modules, steadies, clamping devices, etc.

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Fgodpfxjv T Nqaj Accec Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: ready for operation (used), Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible. Fsdey Hk T Ispfx Accegc

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Fsdpfxehv A A Do Accegc Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Condition: used, Year of construction: 2015, Technical details: Fedpsl Ha Ubofx Accsgc weight of the machine ca.: 4 t

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Fjdpfx Aex N Atfsccegc

Condition: good (used), Year of construction: 1985, machine/vehicle number: 1076-85, Offer 24303 Fsdpfst Dxwgsx Accogc Technical data: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y (transverse) approx. 220 mm - Z (vertical) approx. 400 mm - max. distance milling spindle - table surface 400 mm - Tool holder SK 40 - Work spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeds X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axes digital readout HEIDENHAIN - Vertical milling head tiltable - Horizontal spindle counter holder - Machine vice

Condition: used, Year of construction: 1965, faceplate diameter 5300 mm swing diameter 6300 mm turning height 2800 mm slide adjustment 1700 mm table load 50 t turning speeds 0,3-14 U/min Feed 0,056-10 mm/U digital readout Sony Rest 2 total power requirement 120 kW weight of the machine ca. 187 t No:11670009-05rer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Fsdeyqt R Aopfx Accogc About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team