Used Dorst Mech. High-Performance Automatic Press (1046) for sale (43,093)

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min Fgodpfxsvuugcs Ad Nsb dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1976, pressure 200 t distance between columns 1550 mm Fgsdpfovuubajx Ad Neb stroke 30 - 160 mm no. of strokes 30 - 90 Hub/min dayligth (stroke and adjustment up) 745 mm column travel -side 800 mm table surface area 1500 x 1150 mm hole in the table 450 mm table height over floor 810 mm ram surface 1500 x 1000 mm power requirement 38,0 kW weight of the machine ca. 26,5 t required space 5,1 x 1,6 x 3,7 m ram adjustment 110 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Fjdpfx Adexwp Nye Njgb Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Year of construction: 1976, condition: good (used), machine/vehicle number: H 76-467, Pressing force: 160 kN Ram stroke: 100 mm Fgsdpfx Adoflrhze Nsb Installation height: 350 mm Hole in the table: 100 mm Ram bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx .: 1,2 t

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, pressing force: 16 t, total width: 700 mm, center height: 1,050 mm, working height: 1,050 mm, Automatic straightening system, mechanically overhauled, fitted with new SIMATIC S7-1500 control and Drive Controller CPU 1504D TF. Max. centre distance 500 mm, straightening force 16 t, straightening stroke 20 mm, idle stroke 95 mm, working height 1050 mm, power rating 10 kVA, average consumption 1.3 kW. Fgsdpfx Adexldiqs Nsb Option: The machine can be equipped with a lifting beam conveyor (through the machine), as well as infeed/outfeed belts according to customer requirements, and also with a safety fence. Currently, the machine is equipped with 1 straightening station; expansion is possible.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min Fedpeywxraofx Ad Nsgb 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Condition: excellent (used), Year of construction: 2023, HYDRAULIC HIGH PERFORMANCE BAND SAW LINE Manufacturer: BEHRINGER Model: HBM 440 A Year: 2023 Condition: As new – only 82 operating hours Technical Specifications: - Cutting range (round): 440 mm - Cutting range (flat WxH): 440 x 440 mm - Minimum round/flat: 15 mm / 12 x 12 mm - Saw band dimensions: 6700 x 54 x 1.1 mm - Drive power: 11 kW - Cutting speed: 15 – 150 m/min - Material feed length per stroke: 600 mm - Material feed length, multiple stroke: Max. 5400 mm - Machine weight: 4600 kg - Dimensions (LxWxH): 4900 x 2650 x 2700 mm Fgsdpfoxw T Ugox Ad Nob - Transport height: 2700 mm All information subject to change – errors excepted Equipment & Features: - Coolant system 200 l - Full enclosure of the saw - Chip conveyor - BEHRINGER BT 65 TOUCH CONTROL + AUTO FEED CONTROL - Automatic bar change, max. 3000 kg Infeed: - Magazine KM 45 F-VR /600-6,200 mm - Round material: 50 – 440 mm - Flat: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Driven roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence Outfeed: - Output side: metal belt, ejector plate, storage table Metal belt: - For transporting cut pieces, finished parts, and remnants - Width: 550 mm, length: 4200 mm - Guides on both sides up to 1000 mm length Side ejector for short bars (pusher) Storage table for cut material and stock: - Max. weight: 1000 kg - Length: 2400 mm - Usable depth: 1500 mm Subject to prior sale

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Fjdpfx Adox U Eiao Nsgb Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, Fedpfxetty Nke Ad Nogb the lower platen can be pulled out with the tool. -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: used, Year of construction: 1971, pressure 40 t stroke . mm no. of strokes . Hub/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Fgedeyutuijpfx Ad Nsb please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: not inspected (used), functionality: unexamined, rotational speed (max.): 40,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fodpfx Aeyr R Nxed Nsgb Speed: 40,000 rpm MACHINE DETAILS Length: 670 mm Width: 350 mm Height: 400 mm Weight: 70 kg EQUIPMENT (Currently no information available)

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Fedpovuua Nsfx Ad Negb Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: used, Year of construction: 1989, pressure 20 t total power requirement 20 kW Fodjvr Hkzopfx Ad Nsgb weight of the machine ca. 5 t

Condition: ready for operation (used), functionality: fully functional, For sale: 1 set Kemppi FastMig MXF 67 – High-performance wire feeder for welding systems Info: The Kemppi FastMig MXF 67 is a robust 4-roll wire feeder for 300 mm spools, designed for demanding industrial MIG/MAG welding applications. It delivers 520 A (60% duty cycle) power, a wire feed speed of 0–25 m/min, features an impact-resistant dual-wall plastic housing, and is compatible with FastMig Pulse/Synergic/M power sources. Technical Data (Kemppi FastMig MXF 67): Product group/code: 1693685 (or 6152200) Wire spool diameter: max. 300 mm / 20 kg Feed speed: 0–25 m/min Wire feed mechanism: 4-roll (DuraTorque™) Power (60% duty cycle): 520 A Power (100% duty cycle): 440 A Wire dia. (Fe, Ss): 0.6–1.6 mm Wire dia. (Al): 1.0–2.4 mm Protection class: IP23S Dimensions: 590 x 230 x 430 mm​ Weight: approx. 11.1 kg Main Features: Housing: Extra-sturdy dual-wall plastic housing for tough industrial use. Compatibility: Suitable for FastMig M, Pulse, and KMS power sources. Options: Compatible with SuperSnake GT02S/SW for extended reach. Control panels: Compatible with MR 200/300 (Regular) or MS 200/300 (Synergic) panels. Functions: Provides precise wire feeding and is designed for torches with Euro central connector. The MXF 67 (Product code 6152200) is ideal for heavy-duty welding applications and can be used with suitable models such as the FastMig M. Fgsdpfeyrr S Isx Ad Njb (23 more sets available). Inspection welcome near D-24983 Handewitt. Further info available on firm inquiry. Subject to errors and omissions.

Condition: used, Year of construction: 2021, machine/vehicle number: A2536805, pressing force: 40 t, pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm Fgsdpfx Asfxyhfsd Nob table height:850 mm :200 l

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 121386, Weinig automatic infeed system Fgedpsyt R S Nefx Ad Neb For continuous feeding of uniform and random length pieces into a planer/moulder with short infeed table. Flat magazine with accelerator, Workpiece dimensions: 1800 - 6100 mm Touch control for forward and reverse movement 4-roller accelerator. With four driven feed rollers. The first two feed rollers are electro-pneumatically moved via light barrier. Drive motor frequency controlled 3 kw Infeed speed 10 - 120 m/min. Height adjustment to workpiece thickness manually via hand crank The accelerator is operated from the control panel fitted to the accelerator. The feed speed is adjusted by a potentiometer with digital readout. Transport length x width approx. 1800 x 6500 mm Possible to supply with moulder Powermat 2400, year of production 2015 The price of a complete set 69000

Year of construction: 1986, condition: ready for operation (used), BSTA 60 HL, with BBV 202/120 Fgedpfjizkmtex Ad Nob CE possible Contact us!

Condition: refurbished (used), Year of construction: 2026, pressing force: 60 t, Machine for order High speed press BSTA 60 Retrofit and general overhaul Fgedexb D Dajpfx Ad Njb Conversion to electronic drive und new Unidor PC-control system. Tool area enlargement possible. Please contact us for detailed offers.

Condition: reconditioned (used), Year of construction: 1996, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50USL - Tool loading area 1100mm L-R - Machine under refurbishment, with new controls Fgodpfjwu Rraex Ad Nsb - Roll feed BBV or optionally servo feeder available Please contact us for a detailed quotation!

Year of construction: 1983, condition: used, Bruderer BSTA 50 HL with BBV 202/120 Available delivery time on request CE possible Contact us! Fedpfx Aeizwrlod Negb

Condition: used, Year of construction: 1988, functionality: unexamined, Bruderer BSTA 50 H with 2xBBV 202/120 Fgedpfjuwl Iajx Ad Neb no CE Contact us!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, punching force: 25 t, Bruderer BSTA 250-75B with BBV 190/85H - B-Control, year of mfg. 2006 - Tool area 750mm Fgodpswu Sy Ssfx Ad Neb - Adjustable stroke 13 to 38mm - complete documentation - Soundproof cabin - Machine checked, in very good condition! contact us!

Condition: excellent (used), Year of construction: 2007, operating hours: 19,269 h, functionality: fully functional, BSTA 41, with 2x BBV 202/120+ scrap shear complete refurbished from Bruderer Swiss in 2007 CE possible Fgsdpeuwlvdefx Ad Njb Contact us!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, stroke length: 38 mm, input voltage: 400 V, punching force: 25 t, Bruderer BSTA 25USL with BBV 190/85 roll feed, - year of mfg. 2000 - Tool area 750mm Fsdpfowu Rubjx Ad Nsgb - Adjustable stroke 13 to 38mm - complete documentation - Soundproof cabin - Machine checked, in very good condition! contact us!

Condition: used, Year of construction: 1991, functionality: unexamined, pressing force: 20 t, stroke length: 51 mm, overall weight: 3,600 kg, BSTA 200E press, year of mfg. 1991, in 2000 overhauled, Fsdsw S Hagspfx Ad Njgb with BBV 101/75 roll feed on right-hand side. Adj. stroke 8 to 51 mm Nominal capacity 20 tons Max. tool loading width 420 mm Available immediately ex-stock. Please contact us for more information!