Used Double Flank Gear Rolling Tester for sale (23,838)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, The new price of the machine was €650,000! TECHNICAL DETAILS Capacity (for rolls weighing approx. 60 g): 10,000 - 15,000 pieces/hour Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3 phases, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump operation Ambient temperature: above 10 °C Belt system Belt guidance: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel transverse belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Air flow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manually with air or hot gas Evaporator surface: 311 m² each Air volume: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heating: 4 x 0.72 kW Defrosting interval: sequential Heating in the pan: hot gas Control and switchgear cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to the refrigeration system: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Switchgear cabinet: Stainless steel on stainless steel base Temperature display: at least 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm lamp: optical, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guide for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Iaodpfx Anezardtswou Outfeed at the top Hygienic design Food-grade plastics Easy-to-maintain accessibility SEW main drive with Danfoss frequency inverter SEW overdrive with Danfoss frequency inverter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel base Freezer LED lighting controlled via the touch panel Welded stainless steel base pan with slope and drain outlets Under-freezer protection heating with reserve circuit Base temperature sensor with reserve sensor 4 separate evaporator units with one fan each Evaporator tubes made of stainless steel Evaporator housings made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting in stainless steel block Sequential defrosting Inspection flap in the fan box Remote maintenance Ethernet

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, operating pressure: 6 bar, conveyor belt width: 1,000 mm, production capacity: 18,000 unit/h, The new price of the machine was €460,000! TECHNICAL DETAILS System type: NIVERPLAST packaging line / roll packaging machine Maximum output: 18,000 products/h Packaging unit: 20 pieces Electrical connection: 400 V AC + N + PE / 50 Hz Minimum compressed air connection: 6 bar Compressed air connection: 3/8" Camera counting module Camera system: 1 color camera Baguette capacity: 10,000 pieces/h Maximum capacity for individual products: 60,000 pieces/h LED lighting lifespan: 30,000 h Touchscreen: 19" Conveyor width: 1,000 mm SEPP tubular bag machine Type: VFFS 45° Filling weight: 0.5 - 5.0 kg Maximum output: 2,400 bags/h Drive: AC motor, Lenze Frame: Stainless steel Protective cover: Polycarbonate 6 mm Bag dimensions Bag length: min. 100 mm Bag length: max. 900 mm Bag width: min. 220 mm Bag width: max. 465 mm Film dimensions Film width: min. 500 mm Film width: max. 970 mm Carton erector C-400 Carton length: min. 300 mm Carton length: max. 600 mm Carton width: min. 200 mm Carton width: max. 400 mm Carton height: min. 120 mm Carton height: max. 500 mm Format changeover time: approx. 1 - 2 min Working and discharge height: 600 mm ± 30 mm Carton closer CS-300 Carton length: min. 300 mm Carton length: max. 650 mm Carton width: min. 200 mm Carton width: max. 450 mm Carton height H: min. 115 mm Carton height H: max. 350 mm Carton height C: min. 200 mm Carton height C: max. 500 mm Format changeover time: approx. 1 min Adhesive tape roll length: approx. 990 m Adhesive tape width: 50 mm Ijdpszaq Ansfx Anwoau EQUIPMENT Product feed conveyor Elevator conveyor Intermediate conveyor Camera counting Platform for camera counting Batch conveyor with buffer flap Cross conveyor Discharge chute SEPP Niverplast tubular bag machine 45° inclined forming tube Thermal transfer printer Bag transport Turntable Carton erector Lantech C-400 Empty carton conveyor Button to request empty cartons Packing position Full carton conveyor Gravity roller conveyor Carton closer Control cabinet including control panel and power supply LED light bar, air-cooled Retraction belt with pneumatic drive Separation finger made of stainless steel Stainless steel frame Stainless steel control cabinets on the counting module Film roll drive Detection of empty film rolls Film tear detection Film buffer Tension cylinder Integrated film alignment Automatic film alignment with sensor Impulse sealing with film cutting knife Bottom closure with self-adhesive strip Format adjustment by means of handwheels Clear plastic cover Side presser on the cutting magazine Side curtain on the cutting magazine Control "Carton properly erected" Control "Self-adhesive tape used up or torn" Control "Carton past vacuum suction frame" Discharge with photocell control "Discharge free" Carton closure on top with adhesive tape Open cable channel with metal-detectable cable ties Powder-coated control cabinet HMI Lenze v800-P IPC Lenze, Codesys, IEC 61131 Safety components Pilz Drives Lenze Pneumatic components Festo Sensors Sick

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23022001, tilt adjustment saw blade: 45 °, workpiece width (max.): 80 mm, workpiece height (max.): 70 mm, main saw diameter: 350 mm, production capacity: 1,900 unit/h, This machine is an automatic double miter saw! TECHNICAL DETAILS Process stations: up to 6 Cutting angle: 45° Suitable materials: wood, MDF, strips, profiles, and aluminum, depending on the saw blade Cutting performance / production output Production output: 1,500 to 1,900 cuts/hour Cutting type: simultaneous double miter cut Workpiece dimensions Workpiece width max.: max. 80 mm Workpiece height max.: 70 mm Saw unit Saw blades: 2 x diameter 350 mm Cutting positions: 2 Saw blade position: 45° Feed / material feed Feed stroke max.: 1,200 mm Feed stroke optional max.: 1,600 mm Feed length max.: 3,200 to 6,200 mm Vertical feed length: 3,000, 4,000, 5,000, or 6,000 mm MACHINE DETAILS Motor power: 2 x 1.5 kW System: industrial pneumatic system Clamping system: vertical and horizontal pneumatic clamping Software version: 6.0.7.0 Operation: touchscreen, mouse, or external keyboard Programming methods: frame method and list method Production data: production reporting Extraction nozzle: 2 x diameter 80 mm Extraction: prepared for dust and chip extraction Control: PLC / control modules Control cabinet: industrial control cabinet with relays, transformer, circuit breakers, and cable ducts Cooling: forced ventilation Layout / installation dimensions / weight Installation length Layout 1: 6,282 mm Installation depth Layout 1: 1,100 mm Installation length Layout 2: 8,250 mm Installation depth Layout 2: 4,000 mm Installation length Layout 3: 13,952 mm Installation depth Layout 3: 9,000 mm Partial dimension Layout 2: 2,560 mm Partial dimension Layout 2: 2,490 mm Partial dimension Layout 2: 3,200 mm Machine weight: 550 kg EQUIPMENT Automatic double miter cut Vertical or horizontal material feed Primary material gripper system Optional advanced material gripper system Speed-feed servo system Vertical and horizontal clamping device Unloading belt with ejector Kick-out conveyor Pneumatic transfer conveyor Touchscreen control Password-protected software platform Manual control of all machine commands Programming via frame or list method Simulation and visualization of cutting programs Cutting and material optimization Production data acquisition Operating panel with screen and indicators PLC / control modules Industrial relays Mean-Well power supply Transformer Circuit breaker Wiring in cable ducts Forced ventilation Industrial pneumatic actuators Tested connections and hoses Iajdpfx Aozdkttenweu Emergency stop Safety devices Prepared for dust and chip extraction

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) Iasdpfx Ajruakgenwju 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Isdortr D Ijpfx Anwjau Bosch CNC Control Specifications: Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Iaodofnk Ehjpfx Anweu Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Iajdpforualpex Anwju Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Iodjxaqa Sepfx Anwjau Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Iajdoxdfazepfx Anwsu Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Isdpfxexdfa Ue Anwoau Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. Iaodpfertrzdsx Anwou The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Iasdpfx Aertryksnwou Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7,8 t dimensions of the machine ca. 4,40x3,95x3,01 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Iaodpfsv Ehbbex Anwsu Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear Iasdpfovr Hf Esx Anwsu axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Year of construction: 1983, condition: used, machine/vehicle number: 3604.1, Clamping surface for workpiece device: 230 x 500 mm Installation height between table and punch holder adjustable: 160 - 400 mm Projection to the center of the punch: 130 mm Stamp working stroke: 40 - 250 mm Punch pressing force max .: 40 kN Stamp speed: 7.5 m / min max.working stroke: 2300 / h Iaedpfocxb Nmex Anweu electr. Connection: 380 V, 1 kW Weight approx .: 620 kg Required space: 1030 x 850 x 2060 mm

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The Isdpsw N S E Aefx Anwjau combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Year of construction: 2025, condition: used, functionality: unexamined, Complete Automatic Roll Forming Line (fully compatible with all Unistrut products) Year of manufacture: 2025 Model: CIRF-2019-2486 Unistrut 41 x 41 and 41 x 21 profile Approximately 15 meters per minute UK / Irish wiring standard (UK wiring schematics, safety pull cord system around main beds) Iaedpezc Hkgsfx Anweu with 2-ton de-coiler 3-stage, 3-ram punching unit (Hole Size: Approx 12mm × 25mm / Hole Spacing: Approx 50mm centers) Fully automatic upstroke shear Auto Hydraulic Logo printer/stamper Discharge table Overall Length: Approximately 30 meters

Condition: used, Year of construction: 2015, Dugard CY2 – 52MB Twin Spindle Double Y Axis CNC Lathe S/No. CY2040502 (2015) with Mitsubishi M700 CNC Control, Double Y Axis Twin Turret Machine with Main and Sub Spindle, A Axis Contouring Capability, Max Bar Size 52mm, Spindle Speed Max 6000rpm, Spindle Collet Size TRB-52, Travels X1 – 210mm, Y1 – 460mm, Z1 – 250mm, X2 – 480mm, Y2 – 460mm, Z2 – 270mm, 48 Tool Total,12 Tool Driven on Main Spindle, 3 Tool Driven on 2nd Spindle, Orion Spindle Oil Chiller Unit, Smartec DS1404 High Pressure Coolant System, LNS Fox WS500 Oil Mist Filter Extractor, 3m Barload Automatic Bar Feeder Type MOG. S/No. 25130103 (2013), Machine Size: 3.4 x 2.15 x 2.1m, Machine Weight: 6000kg Iajdpfx Aozdtfrsnwou Location: These lots are located in Ashford, Kent, Birmingham & Burton on Trent, UK. Please see individual lot for dismantling and loading charges.

Condition: used, empty load weight: 8,441 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 07/2020, loading space length: 13,403 mm, loading space width: 2,460 mm, loading space height: 2,700 mm, loading space volume: 89 m³, suspension: air, tire size: 385/55 R22,5, color: white, Year of construction: 2020, Equipment: ABS, Tare weight: 8441 kg, GVW: 38000 kg, Cargo securing with certificate, Loading area (L W H): 13,403 mm x 2,460 mm x 2,700 mm, Tire size: 385/55 R22.5, DIN EN 12642 (code XL) certificate, Loading area volume: 89 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun protection, Lift axle front and rear, Electronic Brake System EBS, Fire extinguisher holder, Double spare wheel carrier, Bolted chassis, Gantry doors, Double deck with beams, 1x15 and 2x7 pin plug, Antispray, Brake discs axle 1 remaining thickness 40mm, Brake pads wear 50%, Brake discs axle 2 remaining thickness 39mm, Brake pads wear 80%, Brake discs axle 3 remaining thickness 39mm, Brake pads wear 70%, Mines: - FRC: -, Please find an overview of all available vehicles on our website. Do you require financing? We offer individual financing solutions, full-service contracts, and telematics services. We would be happy to advise you personally. Iaodpfezdlnrox Anweu

Condition: good (used), functionality: fully functional, Year of construction: 2012, MG SRL MH 316 C 4 Roll Plate Rolling Machine- Year 2012. Iaedpfxszc Rkwj Anwju 4-roll plate bending machine. 3000 mm up to 16 mm. Upper roll diameter 340 mm. Lower and lateral rolls 310 mm.

Condition: used, functionality: fully functional, Year of construction: 2013, MG SRL AR 140 Profile Bending Ring Rollers- Year 2013. Specifications Shaft Ø140 mm Number of rolls 3 Resistance moment 130 CM³ Iaedpfx Aezc N Rconweu Capacity flat 220 x 50 x R=2000 mm Horizontal and vertical Yes, Horizontal + Vertical . Stroke X-Axis 400 mm Capacity Tube 180 x 4 x R=4000 Ø x mm Capacity bar 80 x 80 x R=1000 mm Capacity HEA-Profile 180 x R=1800 mm. Dimensions Length 2100 mm Width 1900 mm Height 2100 mm Weight 6500 kg

Condition: used, mileage: 82,607 km, power: 105 kW (142.76 HP), first registration: 09/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,320 mm, fuel: diesel, CO₂ emissions: 199 g/km, fuel tank capacity: 71 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 7, loading space length: 3,400 mm, loading space width: 2,030 mm, loading space height: 400 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, onboard computer, power assisted steering, trailer coupling, General information Number of doors: 4 Model range: Jun 2018 - Dec 2021 Cab: double Technical information Torque: 330 Nm Number of cylinders: 4 Engine capacity: 2.143 cc Measures length/height: L3H1 Weights Empty weight: 2.305 kg Carrying capacity: 1.195 kg GVW: 3.500 kg Interior Interior: black Consumption Average fuel consumption: 8,1 l/100km (35 MPG) Urban fuel consumption: 9,6 l/100km (29 MPG) Extra urban fuel consumption: 7,3 l/100km (39 MPG) Ijdpsxn Ntmofx Anwsau Maintenance, history and condition Number of owners: 1 Number of keys: 1 (1 hand transmitter) Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Automatic dipped headlights - Bluetooth car kit - Co-driver's bench - Driver's airbag - Electrically operated front windows - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Remote central locking - Telephone enabled with Bluetooth - Third brake light

Condition: new, maximum load weight: 14,580 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, NEW VEHICLE!! TO RENT, BUY OR RENT AND BUY BY ARRANGEMENT!! Meiller roll-off trailer with steel frame / container lengths up to 7.00m / NEW VEHICLE! ----* Manufacturer: Meiller * Type: BTA MG18-ZL 5.4 - roll-off trailer * First registered: - (NEW VEHICLE) * Total weight: 18,000 kg * Empty weight according to manufacturer: approx. 3,420 kg * Payload: 14,580 kg * Axles: 2x BPW axles/disc brakes * Suspension: ZL air suspension with lowering device * Tires: 265/70 R 19.5 profile S / twin tires * ABS/EBS * Container lengths from 5.00m to 7.00m * Drawbar 40 eyelet * Container lengths 5.00 to 7.00m * Drawbar length 2.60m * Drawbar eye 50mm * Bogie with low-maintenance ball bearing steering ring * Aluminum air tank * 4 pneumatic, Four locks integrated into the cross members * automatic locking of the container after coupling the trailer to the towing vehicle * Smartboard * 1x LED work light * 1x tool box on the right * 1x open tool box on the left * Single fender with splash guard mats * LED license plate lighting * LED tail lights and additional LED reversing lights * continuous splash flap on the underrun protection NEW VEHICLE!! AVAILABLE FOR RENT, PURCHASE OR RENT AND PURCHASE BY ARRANGEMENT!! Ijdpjq Hnkxsfx Anweau

Condition: good (used), mileage: 125,254 km, power: 110 kW (149.56 HP), first registration: 06/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: grey, gearing type: automatic, number of gears: 6, emission class: euro6, number of seats: 5, total length: 5,480 mm, total width: 1,960 mm, total height: 1,940 mm, permissible axle load (axle 1): 1,625 kg, permissible axle load (axle 2): 1,650 kg, Year of construction: 2022, Equipment: ABS, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, power mirror, traction control, = Additional Options and Accessories = - Automatic low beam headlights - Heated exterior mirrors - Third brake light - Euro 6 emission standard - Driver airbag - Remote central locking - Cruise control - Rear doors - Wooden cargo bed - Height-adjustable driver's seat Iaedpfx Aneyz U I Sewju - Air conditioning - LED daytime running lights - Metallic paint - Front center armrest - Fog lights - Parking sensors - Rain sensor - Immobilizer - Partition with window = Additional Information = General Information Number of doors: 5 Cab: double cab License plate: VRF-98-N Technical Information Number of cylinders: 4 Engine displacement: 1,997 cc Front axle: Alloy wheels; Max. axle load: 1,625 kg; Steered Rear axle: Alloy wheels; Max. axle load: 1,650 kg Weights Unladen weight: 1,949 kg Payload: 1,121 kg GVW: 3,070 kg Maintenance, History and Condition APK (Technical Inspection): valid until 07/2026 Technical condition: good Optical condition: good

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Iaodewtpgtspfx Anweu Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg