Used Forst Internal Broaching Machine for sale (70,588)

Condition: used, Year of construction: 2008, operating hours: 18,937 h, functionality: fully functional, machine/vehicle number: 67, STUDER S145cnc INTERNAL GRINDING MACHINE Series 65 Year of manufacture: Sep. 2008 Operating hours: 18,937 Price: €118,000 This is a service-recorded machine: it undergoes an annual maintenance check by STUDER, with all wear parts replaced as needed. The machine has been used exclusively for producing precision spindles, achieving tolerances up to max. 0.0003 mm. The machine operates with grinding oil. Initially used in single-shift operation, in the last two years it has been working two shifts. The machine is in use and available for inspection upon request. The machine is being sold due to new equipment acquisition. Extras: Spindle adapters and flanges available upon agreement. Specifications: • Swing diameter ..... 448 mm • Center height ..... 225 mm • Workhead (chuck spindle head) with roller bearings, mounting taper ISO50 – spindle nose Ø110 mm, spindle bore Ø50 mm • Machine bed made from Granitan S103 • Worktable swiveling range: +/-30° • Direct measuring system for X and Z axes • Touch-trigger probe Movomatic C25 (switching) • FANUC CNC control system 21i-TB • Portable control unit Studer PCU terminal with LCD display • Machine is currently in operation • Transport arrangements to be made by the buyer The machine is equipped with 4 spindles: one external spindle, two internal spindles, and one internal spindle with longitudinal positioner. RPM – one spindle: 60,000; two spindles: 42,000; one spindle: 5,000 Njdpjyw Nuxefx Akyscr Type: Fischer

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R Ncedew Intaspfx Akysr --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: used, Year of construction: 2005, Type Honanlage Control Nagel In our opinion, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Nodoxwdxispfx Akyjcr Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Ncedjrntirspfx Akyor Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: used, honing diameter 99999 mm stroke 99999 mm throat 99999 mm Used panel of a NAGEL MSU2 No warranty Ncodpfsv Twgiex Akyjr

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 052 249, grinding depth: 250 mm, center height: 260 mm, total width: 1,340 mm, total length: 3,455 mm, total height: 1,710 mm, spindle speed (min.): 3,600 rpm, spindle speed (max.): 40,000 rpm, grinding length: 1,000 mm, overall weight: 3,000 kg, rotational speed (max.): 40,000 rpm, rotational speed (min.): 3,600 rpm, grinding diameter: 200 mm, table speed: 10,000 mm/min, workpiece spindle speed (max.): 40,000 rpm, feed rate X-axis: 6 m/min, input voltage: 380 V, power: 15 kW (20.39 HP), The Voumard 5A LP1000 is a universally applicable internal and face grinding machine designed for high-precision grinding tasks in toolmaking, mechanical engineering, as well as single-part and small-batch production. The machine enables internal, face, and plunge grinding, impressing with its robust construction, high accuracy, and versatile applications. Thanks to its automatic grinding cycles, it is suitable for both manual and semi-automatic operations. The specified price is exclusive of disassembly, packaging, and shipping. Sale from site, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded. Ncsdpfx Aksyvg Eloyer

Condition: used, Year of construction: 1961, honing diameter 160 mm stroke 3025 mm centre height 325 mm workpiece length 3000 mm workpiece dia. 600 mm spindle drive 32-250 U/min stroke speed 0-20 m/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Ncsdpfx Aoyt R Hmskysr possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Return speed: 3m/min Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Njdpfx Aksytvyxeyscr Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals replaced - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) - A safety door with interlock has been installed instead of the rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Condition: used, Year of construction: 1958, honing diameter 40-420 mm stroke 15-6500 mm centre height 520 mm workpiece length 6500 mm Njdpfx Akeyqvgyjyocr workpiece dia. 1000 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1952, 220 mm ja weight of the machine ca. 1,4 t Ncjdpfxoyn R Nwe Akyjr

Condition: excellent (used), Year of construction: 1994, Description to follow! Nodsyrtwropfx Akyscr

Condition: excellent (used), Year of construction: 1985, Description to follow! Nedpoyrtvzsfx Akyjcr

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Nedpfx Astbawkjkyecr Hydraulic tapping machine Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 018.0179.90.035, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) Ncedpfx Akeyh R Uwjyor ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Broaching / Draw Keyseating Machine KARL KLINK RSI 2.5 EH - Year of manufacture: 1965 - Pulling force: 2500 kg / (25 kN) - Broaching speed: 1 mm/min to 9 mm/min (stepless adjustment) - Max. stroke: 800 mm Ncsdpfx Akeymz N Eeysr - Max. workpiece diameter: approx. 250 mm - Motor: approx. 3 kW - Coolant system - Pulling force display - Pulling force limiter - Various guide bushings (see pictures) - Machine feet Dimensions (LxWxH): 1.1 x 0.7 x 2 meters / Weight: 1600 kg Errors and omissions excepted.

Condition: ready for operation (used), Vertical - broaching machine Rausch Type RSIZ 6 / 1000 S Condition is used technical data: Working range : up to 1000 mm Cutting speed 3 to 5 m/min Ncodpodyp Rmofx Akyor Return speed 10 m/min Interior: largest workpiece diameter 600 mm Outer chambers: area of the clamping plate 600 x 340 mm Coolant device Tensile force measuring device Automatic central lubrication Spindle protection by spring band spirals Chip conveyor shut-off counter Dimensions: 1.05 m x 0.9 m x 4.3 m Weight 1200 kg Self-collection or forwarding. We will be happy to help you organize an inexpensive forwarding agent. You are welcome to visit us for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Company names and trademarks are the property of their owners and serve only to identify and describe the products. The machines and tools are sold as is. The installation and electrical connection of the machine/device must be carried out or checked by a trained specialist. Deviations from technical data and errors in the description of the item may occur and are reserved.

Condition: used, Rotary indexing thread tapping machine, 8-station rotary table. 1 inspection station, 1 vertical and 1 horizontal thread tapping unit. With guide bush 1 mm pitch Chiron, thread tapping unit with guide bush 0.7 mm pitch, M4. One discharge station, coolant system. Ncsdpfjyl Ntpox Akysr

Condition: excellent (used), Diameter: 400mm Length: 500mm Ncsdpfxoyt Sqaj Akysr

Year of construction: 1979, condition: ready for operation (used), Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible. Njdpfsyln Dtsx Akyscr

Condition: excellent (used), Hydraulic with semiautomatic cycle Internal grinding diameter 5-200 mm Grinding depth 250 mm Workpiece spindle head center height 180 mm Njdpfx Akoylbhxeyjcr Spindle bore 50 mm Table travel -600 mm Misc. accessories MARCELS MASCHINEN AG

Year of construction: 2002, condition: refurbished (used), I offer on behalf of a customer and on his account a VOUMARD 150 CNC L 1300 for sale. The machine is equipped with: 4-fold turret 3 x inside, 1x empty space for outside pneumatic swivelling dresser diameter max 350 mm length max 1.300 mm CNC Fanuc 32 i Nedpegigv Dofx Akyjcr very extensive accessories among others several hydr. steady rests, power chucks etc. View under "Documents Machine can be inspected under power at the owner's premises. The machine was overhauled in 2016 In addition, I offer 2 pieces of grinding spindles Voumard VMX 90 A, once new, once reconditioned. The can also be purchased seoerat

Condition: good (used), functionality: fully functional, Year of construction: 1992, Vertical broaching machine with numerous holders Nsdpfxoykalmo Akyecr

Year of construction: 1971, condition: ready for operation (used), A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible. Ncjdpfx Akjxyk S Uoyor

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Nedpfsyg Nvtox Akyecr

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Nodpfx Aoxf Ikfekyocr