Used Manea Artima 250/S for sale (74,194)

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Bsdjxl Elgjpfx Aqwswt

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Bsdpfx Aqsvvlyiewewt Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW Bwsdpfxoy E Hyns Aqwjt machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: good (used), Year of construction: 1989, machine/vehicle number: 0172, Offer 25286 Technical specifications: - Saw blade dimensions: 400 x 35 x 2.0 mm - Cutting range - 90° round: approx. 252 mm - flat: approx. 250 x 160 mm - square: approx. 210 x 210 mm Bwjdpfxew Ei Tds Aqwot - 45° round: approx. 160 mm - flat: approx. 150 x 150 mm - Automatic material feed - Max. vise opening: 265 mm – miter-adjustable vise - Coolant system - Drive: 400 V / 0.65 / 1.6 kW - Required space: approx. W 1400 x H 950 x D 1700 mm - Weight: approx. 600 kg

Condition: good (used), Manufacturer: MBT Type: MV-250 S Motor: 5.5 kW Hopper size: 780 x 600 mm Housing size: 3500 x 1000 x 2200 mm Bodpfxohzr U Is Aqwswt

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 14200229, Equipment: documentation/manual, The labeller is equipped with a Domino V 220i thermal transfer printer. Both are in like-new condition. Bwodpfsygv Hxox Aqwst

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, New trade fair exhibit (available immediately): RENNER Riko 700/250 S-KT piston compressor with galvanized 250 liter container with refrigeration dryer and level-controlled condensate drain with sound insulation hood with CEE plug with metal buffer set for compressed air tanks Technical data: Motor power: 4.0 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 570 l/min Cylinder / Stages: 2/2 Bwedpfxjrxu Ero Aqwot Sound level: 68 dB(A) Volume compressed air tank: 250 liters Dimensions L x W x H: 1411 x 722 x 1377 mm Weight: 296kg We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, Year of construction: 1998, cutting diameter 250 mm saw band length 3600 mm cutting width 300 mm capacity 90 degrees: round 250 mm capacity 90 degrees: flat 250 x 300 mm Bwsdpjzp Rxtofx Aqwot capacity 90 degrees: square 250 x 250 mm cutting speed 20 - 100 m/min total power requirement 2,05 kW weight of the machine ca. 720 kg *Metal Band Saw - Fully Automatic Features: - Manual stop with limit switch - Hydraulic clamping vise - Control panel - Stepless adjustment of band speed

Condition: new, Year of construction: 2025, operating hours: 5 h, NEW - Arjes Impaktor 250 EVO 2 with a set of paddle shafts (green cuttings, wood). Discharge height: 3450 mm Bwjdpfx Aqotql S Towjt Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight 14,500 kg Standard configuration Engine: Volvo-Penta, Stage V / 129 kW Hook lift Track drive Overband magnet with discharge hopper Water spraying for reduced dust widening Paddle shafts incl. quick-change cassette Crusher bars Factory paint finish in orange-grey Optional on request: Star shafts (tires, waste, plastic) Concrete shafts (building rubble, asphalt) Concrete crusher basket

Condition: new, wheel diameter 250 mm grinding wheel size 250 x 25 x 20 mm turning speeds 2850 U/min voltage 400 V total power requirement 2.0 kW weight of the machine ca. 23.0 kg. dimensions of the machine ca. 600 x 290 x 300 mm Furnishing: Bwedpfsxak H Sex Aqwot - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Condition: excellent (used), Year of construction: 2010, the complete Tetra Pak volume conversion kit A3 Flex 200/250 ml Square, version machine 100/150. Packed into original wooden Tetra Pak boxes. Excellent condition. Bwodpfjf Th Sxox Aqwet Location - Poland

Condition: used, Year of construction: 2010, Technical details: swing diameter: 260 mm control: 840 D SIEMENS turning speeds: 3.500 1/min spindle drive: 36 / 28 kW chucking diameter: 260 mm travel -x axis: 900 mm travel -z axis: 400 mm turret head: 12 Pos. tool holder: VDI 40 rapid power traverse in X-and Z direction: 100 / 30 m/min dimensions of the machine ca.: 5,3 x 2,4 x 3,31 m CNC vertical lathe with 2 spindles, 2x RÖHM power chucks dia. 315mm, Bwjdpetpq Urjfx Aqwst *

Condition: refurbished (used), Year of construction: 2012, Offered is a vertical turning center EMAG VSC 250. The machine had a mechanically overhaule in 2022 and will be sold like new. The machine is equipped with automation belt. Other peripherals is not included, and can be offerd if requested by customer. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: 250 mm Bwjdpfxjh Tkdqe Aqwet Workpiece height: 100 mm X-stroke: 860 mm Z-stroke: 200 mm MAIN SPINDLE power 28 kW TOOL CARRIER EMAG wheel turret, 12x VDI 40 Delivery time and additional equipment of the machine on request.

Condition: used, Year of construction: 2020, operating hours: 602 h, Arjes IMPAKTOR 250 - 2 sets of shafts - INCL. STAR SHAFTS Year of construction 2020 Bodpfsr Epxljx Aqwswt Hours 602 Original paddle shafts - Armored. Included and mounted, W-E-R-T original star shaft (only 15h - like new) Easy to repair in contrast to the original paddle shaft. Ideally suited for: - Wood - old wood - Rootstocks - tires - Light building rubble Tracked undercarriage and hook lift version Length (mm) 7,700 / 7,300 (transport) Width (mm) 2,300 / 2,300 (transport) Height (mm) 3,500 / 2,800 (transport) Total weight (kg) 14,000 DRIVE EU US ROW* Engine type (Volvo Penta) Exhaust emission standard EU Stage V Bonfiglioli transmission OUTPUT BELT Discharge height (mm) 3,450 Width (mm) 800 Including overbelt magnet and water spraying system SHREDDING UNIT Hopper volume (m3) 2.25

Condition: used, functionality: fully functional, AMBAS BANDSAW AUTOMATIC TYPE MODEL: SN/AU 250 2C USED MACHINE Bwjdpozmxbqofx Aqwjt INTERNAL CODE: SVR 422

Condition: ready for operation (used), Year of construction: 2015, A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible with power. Bwedpfx Asx Dm Dzoqwot

Condition: used, Year of construction: 1993, machine/vehicle number: 1075-14, Offer 20244 Bwsdox Hhbvspfx Aqwjt Technical data approx.: - Filling capacity approx. 250 L - Granulate feeding via suction device - Heating capacity 10 kW - Total drive power 10.5 kW - Temperature controller - Compressed air connection 6 - 8 bar - Mobile version - Required space W 850 x H 2350 x D 950 mm - Weight approx. 180 kg

Condition: used, Year of construction: 2019, operating hours: 1,580 h, functionality: fully functional, total length: 1,100 mm, total width: 670 mm, total height: 1,440 mm, overall weight: 410 kg, power: 3.55 kW (4.83 HP), rotational speed (min.): 2,480 rpm, rotational speed (max.): 1,220 rpm, grinding width: 250 mm, Stroj je vo veľmi dobrom stave, málo využitý .. Bedpfxoyn Dyve Aqwjwt

Year of construction: 2007, condition: good (used), Gallus TCS 250 • Year of manufacture: 06/2007 • Origin: Switzerland • Web width: 250 mm class • Approximate machine length: 14,041 mm • Unwinding unit with web guide and web tension control • TEKNEK web cleaning system • TANTEC corona pre-treatment system • 5 offset printing units • AP ink dosing system • 1 rotary screen printing unit • 1 varnishing unit • UVITERNO COLDSTAR water-cooled UV drying system • Flatbed die-cutting unit Bedjy Idt Dopfx Aqwjwt • Delivery unit with longitudinal slitting • Waste matrix rewinding • Rewinding unit • Insetting system • Technotrans alpha.c cooling/peripheral system Condition: Visual condition: 8/10 Technical condition: 8/10 Machine appears complete and well-maintained Final technical inspection and test run recommended before purchase Commercial terms and additional points: Incoterms: FCA, available loaded on truck Availability: November 2026 Location: Germany

Condition: used, Year of construction: 2009, functionality: fully functional, total width: 4,300 mm, total length: 3,700 mm, total height: 3,000 mm, Description For sale is a Tonello Laser Blaze 250 industrial laser finishing system, offered as a complete enclosed workstation. This high-performance system is specifically designed for laser-based garment finishing, enabling precise and repeatable effects such as denim fading, whiskering, engraving, and decorative surface treatments. The Laser Blaze series by Tonello S.r.l. is widely recognized in industrial denim production, offering a modern and sustainable alternative to traditional manual processes. The system utilizes a Rofin CO₂ laser source, known for its precision, stability, and reliability in continuous production environments. This unit replaces labor-intensive finishing methods such as hand-scraping, sandblasting, and chemical spraying, significantly improving consistency, efficiency, and environmental impact. The machine has been used in a professional garment factory environment and has been tested in operation with video documentation (March 2026). Recently serviced on 27.02.2026. Includes • Tonello Laser Blaze 250 enclosed laser cabin • Integrated laser processing unit • Computer workstation with control system • Electrical cabinets • Cooling unit (MTA) • Ventilation / exhaust connections • Operator control panel and integrated safety system Technical Details • Manufacturer: Tonello S.r.l., Italy • Model: Laser Blaze 250 • Laser source: Rofin CO₂ • Year: 2009 • Power: approx. 30 kW system • Voltage: 400V, 3-phase • Work area: approx. up to 150 × 150 cm • Application: Denim laser finishing and garment treatment Key Features • High-precision CO₂ laser technology for consistent results • Advanced control via Tonello CREA software • Capability for both flat and 3D (mannequin-based) processing • 360° garment effects without flat-pattern limitations • Double-position workflow for improved productivity • Fully enclosed workstation with integrated safety systems Technical Capabilities • Denim distressing (whiskers, chevrons, worn effects) • Laser engraving of logos, graphics, and textures • Photorealistic surface patterning • Multi-material capability (denim, leather, technical textiles) • High repeatability – identical results from first to last garment Sustainability Benefits • Eliminates need for sandblasting and manual abrasion • Reduces water and chemical consumption significantly • Lower energy usage compared to traditional laundry processes • Improves worker safety and production cleanliness Condition Used industrial condition. Machine is complete and was operational prior to factory shutdown. Tested and video recorded in operation (05–06.03.2026). Recently serviced (27.02.2026). Typical signs of use from production environment. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications • Denim laser fading and whiskering • Garment engraving and marking • Decorative textile finishing • Replacement for manual sandblasting processes Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling, loading, and transport. Bwsdpfxoy Ai Ehs Aqwet Professional dismantling strongly recommended due to system size and complexity.

Condition: new, functionality: fully functional, empty load weight: 374 kg, maximum load weight: 926 kg, overall weight: 1,300 kg, loading space length: 2,530 mm, loading space width: 1,520 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ Tipper 250 C S 1.3T NEW VEHICLE Internal dimensions: 253cm x 152cm Side board height: 30cm Loading area height: 80cm Total weight: 1300kg Payload: 926kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT Axle with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning latch Can be folded down and removed on all sides Galvanized steel floor Support wheel 6 tie-down points Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector Outline lights at the front Rear lamps with reversing light and triangular reflectors Upper frame mounted on rubber Hand pump with stowable handle Lock for upper frame Bwjdpfxozlypte Aqwet OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE STARTING FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Loading ramps - Folding crank for rear supports - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Leaf guard in various heights, also closed - Extension side boards, steel or aluminum, 30cm with tensioning latch - Flat cover with or without bows - High cover 140cm Further accessories available on request! Plus freight to Gera and vehicle registration document 200 € net. Images are for illustrative purposes and may show optional accessories at an extra cost. Have you not yet found the right trailer? We have 50-100 vehicles in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repairs, also for caravan trailers. In addition, we have a large assortment of spare parts and accessories for trailers from various manufacturers. Visit us online or come by!

Condition: used, capacity 90 degrees: round 110 mm capacity 90 degrees: flat 255x160 mm capacity 90 degrees: square 210x210 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 165x110 mm cutting range 45 degree right side: square 150x150 mm cutting speed 11/13/17/22/26/34 m/min stroke speeds 50/64/82/100/128/164 Hübe/min dimensions of saw-blade 400x36x2 mm power requirement 1,8 kW Bwedpfx Ajwf Dy Soqwjt

Condition: new, grinding width 32.0 mm max. dia. of grinding wheel 250 mm grinding wheel size 250 x 32 x 32 mm turning speeds 2850 U/min Grain size K 36 / K 80 engine output 1.5 kW voltage 400 V weight 30.0 kg range L-W-H 510 x 320 x 360 mm Bjdpfx Aqjxaa Aiswjwt scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support

Condition: used, functionality: unexamined, Adapter and gluing machine VEA 520 see images untested, price includes loading Bedezua Izspfx Aqwjwt

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, total width: 2,500 mm, total length: 4,500 mm, total height: 3,200 mm, Offered is a double spindle pick up turning machine VSC 250 DUO. There are 2 nearly identical machines available. Each machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The VSC 250 DUO will receive a general overhaul before delivery and gets a control upgrade to Siemens Sinumerik ONE. The machine can be equipped with other periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens Sinumerik One TECHNICAL DATA workpiece diameter: max. 250 mm workpiece height: max. 150 mm chuck diameter: 250/315 mm swing diameter: 350 mm X-stroke: 745 mm Z-stroke: 300 mm TOOL CARRIER working area 1 1x EMAG disc turrets, 12x VDI 50 without driven tools working area 2 Bjdpfx Aor Nc Ufjqwswt 1x EMAG disc turret, 12x VDI 50 with driven tools Price, delivery time and equipment of the machine on request.