Used Geko Generator for sale (11,345)

Year of construction: 2008, condition: not inspected (used), Emergency power generator Geko 6401 ED-AA/ZEDA, year of manufacture 2008, 2050 operating hours, diesel, 220/400 volts, serial number 100821, engine runs but does not generate electricity. Ledjgqfxrjpfx Aiqohl

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Lhjdpfsrtrykox Aiqsl Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: Lhsdpfx Aijruakgjqol B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Lhedpfxoxdfa Us Aiqjl Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Lhjdpfx Ajxdfazjiqsl Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Lsdpfozn Aymjx Aiqjhl Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Lhjdpfxexaqa So Aiqjl Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 2025, power: 2,800 kW (3,806.94 HP), Application: Construction specification Approximate weight in kg: 10,960 kg Lodpfx Asz Dwclsiqohl Dimensions (L x W x H): 572 x 180 x 195 cm

Condition: used, Year of construction: 1989, operating hours: 8,341 h, 1989 | Atlas Copco QAS-85 | Used Generator Set | 8341 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Lhsdoz Ebuuepfx Aiqjl 👷‍♂️ Inspected by an independent expert 20 inspection points 17 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition. Caution, 1989 machine without CE marking and without sockets equipped with protection against overloads, short-circuits, or leakage currents. Plan connection on the busbar set. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41430 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 67,050 km, power: 95 kW (129.16 HP), first registration: 10/2002, fuel type: diesel, color: green, gearing type: automatic, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, Internal vehicle number: 0739BX ----Why AutoNext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing and trade-in options available. Full vehicle range available on autonext. Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----- * 1st owner (government vehicle, which means continuous maintenance) * Perfectly suitable for camper conversion * Upon request, we offer retrofitting of a trailer hitch for only 599 euros * Upon request, we offer window tinting * Good and well-maintained condition * German vehicle * Complete service history * Very good all-weather tires * Number of seats: 6 * Automatic transmission * Air conditioning * Vehicle generator "Camino" from "SET Stromerzeuger GmbH" with regular maintenance and only 1510 hours of operation * Electrolux heater and air conditioner * Webasto auxiliary heater * Rear axle differential lock * Table in the rear * Pop-up roof * Adjustable roof spoiler * 230-volt sockets * CEE plug * 2nd battery, reinforced, 88 Ah * Airbag, passenger side * Airbag, driver side * Exterior mirrors, electrically adjustable and heated, both sides * Chassis, station wagon version * Generator 150 A * Grab handle, passenger side * Rear door with glazing (opening angle 180 degrees) * Fuel tank: main tank 100 liters * Reading light * Stabilizer bar, front * Auxiliary heater * Twin tires, rear * Stabilizer bar, rear * Rear-wheel drive * Engine 2.2 L – 95 kW CDI * Wheelbase 4025 mm * Permissible total weight 4.60 t * MOT/emission test can be done upon request ----Warranty and a "TÜV Profi Check" are of course available! We will gladly accept your vehicle as a trade-in! We will also create a customized financing or leasing offer for you! Without a down payment, redeemable at any time and with special repayment options. Please direct your wishes to our sales team; we will be happy to advise you. ----Make an appointment for a test drive and be convinced by the quality of our vehicles. Appointment arrangements: Mon-Fri from 08:30 - 18:00, Sat from 09:30 - 13:30. ----Visit us on [website address]. We look forward to your visit! Ledpfsyxi Dpjx Aiqehl ----Errors and changes reserved. The equipment offered on the internet is not part of the contract. The equipment must be checked on site.

Condition: new, Year of construction: 2026, Genie GS1932 E-Drive scissor lift, standardly equipped with AGM batteries etc., new, used, and demonstration machines available Ledpfx Aijrhknvjqehl

Condition: ready for operation (used), Year of construction: 2007, Mobile oil warm air generator / heater / heater 120 kW - Used device from rental fleet - built in 2007 - for construction heating / building sites / stables / tents / trade fairs / workshops / etc. Offer description: TB 110, mobile oil warm air generator with separate exhaust gas duct, mounted oil burner RG 2, heating oil pre-filter with quick venting and single-line system, radial fan and plug-in thermostat preparation. Nominal heat load: 120 kW Air output: 6500 m³/h Connection: 230 V/50 Hz Motor output: 1.1 kW Weight: 235 kg Dimensions LxWxH: 200 x 90 x 115 mm Lhedpfxovnux Eo Aiqjl Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain caps are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a shipping company. If you do not have contact with shipping companies, we will be happy to help you with addresses or inquire for you.

Condition: excellent (used), Year of construction: 2023, fuel type: diesel, motor manufacturer: Kubota Z482, Field of application: Construction Empty weight: 1.010 kg Dimensions of cargo space: 225 x 140 x 244 cm CE mark: yes Technical condition: very good Lhedpoxl Uhqofx Aiqsl Visual appearance: very good Voltage: 48 Delivery terms: EXW Please contact Christian Theißen for more information Manufacturer: Generac Model: V20 Year of build: 2023 Condition: Used Data: Performance: 4x300W Low Voltage: 48 Volt Lamp type: LED Max. height: 8,50 m Engine: Kubota Z482 Alternator: Linz Drive type: Diesel Luminous life with one full tank: 140 Hours Operating noise: 58 dB(A) Transport dimensions: 2,25 x 1,40 x 2,44 m Dimensions when set up: 2,64 x 1,90 x 8,50 m Own weight: 1010 kg Special features: Digital controller, 3 doors, RLS, stabilizers with quick locking Location: 41468 Neuss: immediately available

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT10401014064, empty load weight: 1,500 kg, maximum load weight: 2,300 kg, overall weight: 3,800 kg, axle configuration: 1 axle, loading space length: 2,000 mm, loading space height: 1,000 mm, total length: 4,300 mm, total width: 2,460 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: green, - Single-axle container trailer - Type EPS 38 for diesel generator set body - Multiple units available - Please note: archive images! #Chassis single-axle trailer - Welded construction in fine-grain steel - Generator set secured by bolted connection - Reinforced front jockey wheel, mechanically adjustable in length, folding at the bottom - 1 pair of 2-speed landing legs at rear, with straight lower section, left and right operated independently - 2 wheel chocks with holders - Aluminium side underrun protection, painted RAL 6031 bronze green matt - Steel rear underrun protection, painted RAL 6031 bronze green matt - Mudguards in front of and behind the axle, with sheet-metal cover on top - With anti-spray mud flaps - 2 pairs of lashing cut-outs, 1 pair front and 1 pair rear, recessed into the cross members, each rated 3 t for loading the trailer, marked (sticker) - 4 pairs of ferry lashing eyes, marked yellow - Lashing point sticker on each lashing eye - Rosette-pattern perforated steel plate on both sides outside next to the generator set, pull-out ladder on both sides - Holder for 2 x 20 l fuel cans on the vehicle frame, right-hand side in direction of travel - Central lashing point sticker - Steel storage box at front, recessed into the floor, with drainage holes, lined with perforated rubber mat, lockable lid #Towing device single-axle trailer - Drawbar with tested reversible towing eye: 40 mm / NATO eye (changed by turning) - Drawbar height-adjustable via spindle; nut for spindle mounting bolt at bottom, right-hand side in direction of travel Lhedpfx Aiezazrtsqol - Parking sockets for electrics/EBS and air #Axle + suspension - BPW axle with taper roller bearings and S-cam brake - Axle/running gear laser-aligned – reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushes #Wheels and tyres - 235/75 R 17.5 - Make at manufacturer's discretion - Steel rims, factory silver #Braking system - Dual-line air brake system - Spring brake actuator parking brake - 2 non-interchangeable coupling heads at front, with connecting lines to the towing vehicle - Yellow connection on the left and red connection on the right in direction of travel - ABS/EBS electronic braking system with EBS connector at front, with connecting cable - EBS modulator mounted in a protected position - Caution: the trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! - Vehicle stability system #Electrics - 24 V, multi-chamber lamps, yellow LED side lighting - ADR-compliant electrics with certificate - 2 white front position lamps and reflectors - 2 white/red rear outline marker lights - 1 x 15-pin socket + 1 x detachable 15-pin coiled cable at front #Registration / plates - Country of registration: Germany - With DEKRA inspection and expert report (acc. to §13 EG-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective tape acc. to ECE R 048, rear only, white - Warning plate acc. to ECE-70 #Paintwork - Frame RAL 6031, bronze green matt - Drawbar in frame colour

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 5,200 kg, fuel type: diesel, color: beige, power: 513 kW (697.49 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 408 kW (554.72 HP), nominal power (apparent): 510 kVA, continuous power: 368 kW (500.34 HP), total length: 4,460 mm, total width: 1,606 mm, total height: 2,493 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator set - stationary Type: DW 460 DO2 15 AK14A PRP output: 368 kW / 460 kVA ESP output: 408 kW / 510 kVA Operating hours: 1 Engine: DOOSAN DP158LC Power standby: 513 kW Speed: 1,500 rpm Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40-3S/4 B Voltage: 400/231 V Voltage regulator: DER-1/A Control panel: DSE 7320 - automatic emergency power supply Dimensions: 4460 x 1606 x 2493 mm (LxWxH) Weight: 5200 kg Equipment: Battery charger 5 Amper, battery disconnect switch Lhodpfeua Tl Asx Aiqel

Condition: used, mileage: 25,943 km, power: 154 kW (209.38 HP), first registration: 06/2003, fuel type: diesel, overall weight: 10,500 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total length: 7,090 mm, total width: 2,500 mm, total height: 3,120 mm, Equipment: ABS, all wheel drive, parking heater, Well-maintained LF 8/6 fire engine on an Iveco Euro-Fire FF 100 EW chassis with single tires, size 12.5 R 20 147 K. Ledpfxoz D N Nwj Aiqshl Superstructure by Magirus with a rear-mounted Eurofire 8/8 pump, 600-liter water tank, lighting mast, and external power supply. Equipped with: hydraulic rescue set from Weber, including spreader, cutting device, and accessories. A generator from Kirsch, 5.5 kVA, and a TS 8/8 portable pump from Magirus with pneumatic lift/loading aid. (Timing belt of the TS replaced in 2020), 4 extension ladders, suction hoses, suction strainers, and other accessories. GVWR 10.5 t, unladen weight 7.06 t, trailer hitch 2.0 t with ball head, special signal system, auxiliary heater. Pleasantly smooth engine operation, maximum speed according to documents = 96 km/h. +++ Subject to errors, changes, and prior sale.

Condition: excellent (used), Year of construction: 1985, fuel type: diesel, color: other, 2954 = More information = Year of manufacture: Jul 1985 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Lodsymrmbopfx Aiqehl Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2004, fuel type: diesel, power: 1,088 kW (1,479.27 HP), total length: 6,000 mm, total width: 2,550 mm, total height: 2,900 mm, Empty weight: 15.850 kg Lhsdpjz A Ednsfx Aiqjl Generator capacity: 1.250 kVA Current frequency: 50 Hz Voltage: 400

Condition: new, Year of construction: 2002, power: 400 kW (543.85 HP), total length: 5,010 mm, total width: 1,400 mm, total height: 1,850 mm, Empty weight: 3.840 kg Generator capacity: 540 kVA Current frequency: 50 Hz Lhjdpsz A D Skefx Aiqjl Voltage: 400

Condition: new, Year of construction: 2013, fuel type: diesel, power: 1,900 kW (2,583.28 HP), total length: 12,000 mm, total width: 2,400 mm, total height: 2,700 mm, Empty weight: 28.500 kg Fuel tank: 7500 litres Generator capacity: 2.500 kVA Current frequency: 50 Hz Lhodpfx Aez A D I Eeiqjl

Condition: new, Year of construction: 2013, fuel type: diesel, power: 1,900 kW (2,583.28 HP), total length: 12,000 mm, total width: 2,400 mm, total height: 2,700 mm, Empty weight: 28.500 kg Fuel tank: 7500 litres Generator capacity: 2.500 kVA Lsdpfx Aoz A D Ixeiqohl Current frequency: 60 Hz

Condition: used, Year of construction: 2004, fuel type: diesel, power: 1,900 kW (2,583.28 HP), total length: 12,000 mm, total width: 2,400 mm, total height: 2,700 mm, Empty weight: 24.500 kg Fuel tank: 7500 litres Ledpfx Aioz A D Ilsqjhl Generator capacity: 2.000 kVA Current frequency: 60 Hz

Condition: used, Year of construction: 1993, Generator set / Emergency generator Manufacturer: Leroy-Somer Ledpfxsztnfre Aiqohl Type: LSA 44.1L6 AREP Year of manufacture: 1993 Continuous power: 80 kW / 100 kVA Voltage: 400 V (three-phase) Frequency & speed: 50 Hz at 1500 rpm Current: approx. 144.3 A

Condition: used, Emergency power generator Manufacturer: Anton Piller KG Type: NKTB 2-818 Year of manufacture: unknown Speed: 3000 rpm Voltage: 400 / 231 V Current: 118 A Frequency: 50 Hz Lhodpfx Aieztnh Hoqjl Apparent power: 82 kVA Efficiency/Power factor: $\cos \varphi = 0.8$ (corresponds to approximately 65.6 kW active power) Protection class: IP 23 Insulation class: F 22926ä

Year of construction: 1969, condition: used, Generator set, emergency generator Manufacturer: MWM – Motoren-Werke Mannheim AG Type: D208-6 (6-cylinder diesel engine) Engine No.: 208.6.02024 Year of manufacture: 1969 Power: 57 hp, 1500 rpm Generator Manufacturer: A. van Kaick Lhsdpfeztndzox Aiqsl (Generator and Engine Works, Frankfurt am Main) Type: BJB 42/45-4, self-regulating Generator No.: 40719 Power: 40 kVA, 400 V, cos φ 0.8, 1500 rpm 40 kVA, 50 Hz 22926ä